Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TITAN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Hydrothermal synthesis map of bismuth titanates

The hydrothermal synthesis of four bismuth titanate materials from common bismuth and titanium precursors under hydrothermal conditions is described. Reaction of NaBiO{sub 3}{center_dot}2H{sub 2}O and anatase TiO{sub 2} in concentrated NaOH solution at 240 Degree-Sign C is shown to produce perovskite and sillenite phases Na{sub 0.5}Bi{sub 0.5}TiO{sub 3} and Bi{sub 12}TiO{sub 20}, depending on the ratio of metal precursors used. When KOH solution is used and a 1:1 ratio of the same precursors, a pyrochlore Bi{sub 1.43}Ti{sub 2}O{sub 6}(OH){sub 0.29}(H{sub 2}O){sub 0.66} is formed. The use of a mixture of HNO{sub 3} and NaOH is shown to facilitate the formation of the Aurivillius-type bismuth titanate Bi{sub 4}Ti{sub 3}O{sub 12}. The phases have been isolated separately as phase-pure powders and profile refinement of powder X-ray diffraction data allows comparisons with comparable materials reported in the literature. Analysis of Bi L{sub III}-edge X-ray absorption near edge structure (XANES) spectra of the materials shows the oxidation state of bismuth is +3 in all of the hydrothermally derived products. - Graphical abstract: Use of NaBiO{sub 3}{center_dot}2H{sub 2}O and TiO{sub 2} as reagents under hydrothermal conditions allows the phase-pure preparation of four crystalline bismuth titanate materials. Highlights: Black-Right-Pointing-Pointer NaBiO{sub 3} and TiO{sub 2} under hydrothermal conditions allow formation of bismuth titanates. Black-Right-Pointing-Pointer Synthesis of four distint phases has been mapped. Black-Right-Pointing-Pointer Bi LIII-edge XANES shows Bi is reduced to oxidation state +3 in all materials. Black-Right-Pointing-Pointer A new hydrated bismuth titanate pyrochlore has been isolated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comparison of the photocatalytic activity of six tunneled titanates

The photocatalytic behavior of six tunneled titanates—Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}, Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10}, Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, K{sub 1}Ga{sub 17}Ti{sub 15}O{sub 56}, K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16}, and BaTi{sub 4}O{sub 9}—was investigated using methylene blue as an indicator and a xenon arc lamp as the radiation source. Powders prepared by solid state reaction had surface areas ranging from 0.40 to 1.58 m{sup 2}/g and particle sizes ranging from 1 to 25 μm. Bandgaps, as measured from diffuse reflectance data, ranged from 2.84 to 4.15 eV. Two of the tunneled titanates—Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10} and Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}—exhibited negligible photocatalytic activity. The activities of Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, KGa{sub 17}Ti{sub 15}O{sub 56}, and K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16} were similar to each other, exhibiting apparent first-order reaction rates of 0.275 to 0.31 h{sup −1} using 100 mg of powder in 125 ml of 20 μM methylene blue at room temperature. The BaTi{sub 4}O{sub 9} sample exhibited the highest photocatalytic activity with an apparent first-order reaction rate of 0.53 h{sup −1} under the same conditions. The addition of a RuO{sub 2} co-catalyst improved the photocatalytic activity of Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}, decreased the activity of BaTi{sub 4}O{sub 9}, and had little effect on the activity of the other powders. A comparison of the structural features in the six materials shows that photocatalytic activity is strongly related to the density of TiO{sub 6} octahedra in the different crystal structures. Among the gallium-containing tunneled titanates, photocatalytic activity increased with decreasing band gap. - Graphical abstract: Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}—One of the tunneled titanates investigated. Highlights: ► The photocatalytic activity of six tunneled titanates was compared. ► Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10} and Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8} exhibited negligible photocatalytic activity. ► The activities of Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, KGa{sub 17}Ti{sub 15}O{sub 56}, and K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16} were similar to each other. ► BaTi{sub 4}O{sub 9} exhibited the highest photocatalytic activity. ► Photocatalytic activity is related to the density of TiO{sub 6} octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fe-doped nanostructured titanates synthesized in a single step route

In this research nanostructured titanates, containing iron in the structure, were obtained through a single-step alkaline hydrothermal route aiming at reduction of band-gap energy. In the process, a Fe–Ti rich Brazilian mineral sand was mixed with 10 M of NaOH and then submitted to isothermal treatments at temperatures ranging from 110 to 190 °C in an autoclave. The as-obtained products were water-washed and then characterized by transmission electron and scanning transmission electron microscopies, X-ray photoelectron, Mössbauer and diffuse reflectance spectroscopies. Transmission electron microscopy analyses showed a morphological dependence of the product as a function of the temperature, i.e., titanate nanosheets were predominantly formed at lower temperatures (110 °C–150 °C), while nanoribbons, with some nanosheets and nanoparticles, were the main products at higher temperatures (> 150 °C). Using energy dispersive X-ray it was determined that iron was incorporated into nanosheets. On the other hand, the as-obtained nanoribbons were Fe-free, while iron was principally associated with nanoparticles attached to the nanoribbons. By means of X-ray photoelectron and Mössbauer spectroscopies, it was elucidated that iron adopted Fe{sup 3} {sup +} form in the as-prepared nanosheets, occupying octahedral sites inside the titanate lepidocrocite-like structure. Diffuse reflectance spectroscopy showed a change of absorption pattern from nanosheets to nanoribbon/nanoparticle assembly: nanosheets exhibited high absorption from ultraviolet up to the visible light range, while the nanoribbon/nanoparticle assembly demonstrated a drop in absorption in the visible light range. These results suggest that Fe{sup 3} {sup +} incorporation inside the titanate structure is responsible for enhancing the visible light absorption, making these nanosheets potentially suitable for applications in photoinduced processes. - Highlights: • Mineral sand has been used as the precursor for the synthesis of nanotitanates. • Fe-doped nanotitanates have been prepared in a single step wet chemistry route. • The morphology of the nanometric titanates is a function of the temperature. • Mössbauer spectroscopy reveals Fe{sup 3} {sup +} in octahedral sites inside nanosheets. • The Fe incorporation in nanosheets improved the visible light absorption.

36 MATERIALS SCIENCE↗

Synthesis and structural characterization of Ce-doped bismuth titanate

Ce-modified bismuth titanate nanopowders Bi{sub 4-x}Ce{sub x}Ti{sub 3}O{sub 12} (x {<=} 1) have been synthesized using a coprecipitation method. DTA/TG, FTIR, XRD, SEM/EDS and BET methods were used in order to investigate the effect of Ce-substitution on the structure, morphology and sinterability of the obtained powders. The phase structure investigation revealed that after calcinations at 600 deg. C powder without Ce addition exhibited pure bismuth titanate phase; however, powders with Ce (x = 0.25, 0.5 and 0.75) had bismuth titanate pyrochlore phase as the second phase. The strongest effect of Ce addition on the structure was noted for the powder with the highest amount of Ce (x = 1) having a cubic pyrochlore structure. The presence of pure pyrochlore phase was explained by its stabilization due to the incorporation of cerium ions in titanate structure. Ce-modified bismuth titanate ceramic had a density over 95% of theoretical density and the fracture in transgranular manner most probably due to preferable distribution of Ce in boundary region.

36 MATERIALS SCIENCE↗

Magnetic phase composition of strontium titanate implanted with iron ions

Highlights: Black-Right-Pointing-Pointer The origin of RT-ferromagnetism in iron implanted strontium titanate. Black-Right-Pointing-Pointer Metallic iron nanoclusters form during implantation and define magnetic behaviour. Black-Right-Pointing-Pointer Paramagnetic at room temperature iron-substituted strontium titanate identified. -- Abstract: Thin magnetic films were synthesized by means of implantation of iron ions into single-crystalline (1 0 0) substrates of strontium titanate. Depth-selective conversion electron Moessbauer spectroscopy (DCEMS) indicates that origin of the samples magnetism is {alpha}-Fe nanoparticles. Iron-substituted strontium titanate was also identified but with paramagnetic behaviour at room temperature. Surface magneto-optical Kerr effect (SMOKE) confirms that the films reveal superparamagnetism (the low-fluence sample) or ferromagnetism (the high-fluence sample), and demonstrate absence of magnetic in-plane anisotropy. These findings highlight iron implanted strontium titanate as a promising candidate for composite multiferroic material and also for gas sensing applications.

36 MATERIALS SCIENCE↗

Propane clusters in Titan’s lower atmosphere: insights from a combined theory/laboratory study

ABSTRACT In spite of the considerable advances made by Cassini–Huygens in our understanding of Titan, many questions endure. In particular, the detailed processes that lead to the formation of haze aerosols in Titan’s atmosphere, found in high concentrations at low altitudes, are not well identified. Hydrocarbons, which are abundant constituents of Titan’s cold atmosphere originating from photochemical processes, may simultaneously condense on the surface of existing aerosols, nucleate and grow to generate new aerosol seeds. The relative importance of the various processes depends on several factors, including the saturation ratio. The dynamics of hydrocarbon condensation and nucleation in Titan’s atmosphere remains poorly known. Aiming to progress on these issues, we investigate here the kinetics of propane dimer formation at low temperature through state-of-the-art laboratory experiments combined with theoretical calculations. Our results provide an estimate of the rate coefficients, which are then employed to evaluate the abundance of propane dimers in the lower atmosphere of Titan. The mixing ratios of propane dimers inferred, with a maximum abundance of 10 cm−3 near 100 km, is found to be under the detection limit of the Composite Infrared Spectrometer of the Cassini spacecraft. Based on our results, homogeneous nucleation of the most abundant species appears not to be relevant for the growth of aerosols. Future studies should focus on homogeneous nucleation of polar molecules or alternatively on heterogeneous processes, which are usually more efficient.

79 ASTRONOMY AND ASTROPHYSICS↗

High Resolution Camera for Mapping Titan Surface

Titan, Saturn's largest moon, has a dense atmosphere and is the only object besides Earth to have stable liquids at its surface. The Cassini/Huygens mission has revealed the extraordinary breadth of geological processes shaping its surface. Further study requires high resolution imaging of the surface, which is restrained by light absorption by methane and scattering from aerosols. The Visual and Infrared Mapping Spectrometer (VIMS) onboard the Cassini spacecraft has demonstrated that Titan's surface can be observed within several windows in the near infrared, allowing us to process several regions in order to create a geological map and to determine the morphology. Specular reflections monitored on the lakes of the North Pole show little scattering at 5 microns, which, combined with the present study of Titan's northern pole area, refutes the paradigm that only radar can achieve high resolution mapping of the surface. The present data allowed us to monitor the evolution of lakes, to identify additional lakes at the Northern Pole, to examine Titan's hypothesis of non-synchronous rotation and to analyze the albedo of the North Pole surface. Future missions to Titan could carry a camera with 5 micron detectors and a carbon fiber radiator for weight reduction.

Cassini↗

Analytic Theory of Titans Schumann Resonance: Constraints on Ionospheric Conductivity and Buried Water Ocean

This study presents an approximate model for the atypical Schumann resonance in Titan's atmosphere that accounts for the observations of electromagnetic waves and the measurements of atmospheric conductivity performed with the Huygens Atmospheric Structure and Permittivity, Wave and Altimetry (HASI-PWA) instrumentation during the descent of the Huygens Probe through Titan's atmosphere in January 2005. After many years of thorough analyses of the collected data, several arguments enable us to claim that the Extremely Low Frequency (ELF) wave observed at around 36 Hz displays all the characteristics of the second harmonic of a Schumann resonance. On Earth, this phenomenon is well known to be triggered by lightning activity. Given the lack of evidence of any thunderstorm activity on Titan, we proposed in early works a model based on an alternative powering mechanism involving the electric current sheets induced in Titan's ionosphere by the Saturn's magnetospheric plasma flow. The present study is a further step in improving the initial model and corroborating our preliminary assessments. We first develop an analytic theory of the guided modes that appear to be the most suitable for sustaining Schumann resonances in Titan's atmosphere. We then introduce the characteristics of the Huygens electric field measurements in the equations, in order to constrain the physical parameters of the resonating cavity. The latter is assumed to be made of different structures distributed between an upper boundary, presumably made of a succession of thin ionized layers of stratospheric aerosols spread up to 150 km and a lower quasi-perfect conductive surface hidden beneath the non-conductive ground. The inner reflecting boundary is proposed to be a buried water-ammonia ocean lying at a likely depth of 55-80 km below a dielectric icy crust. Such estimate is found to comply with models suggesting that the internal heat could be transferred upwards by thermal conduction of the crust, while convective processes cannot be ruled out.

TITAN↗

Transient Climate Effects of Large Impacts on Titan

Titan's thick atmosphere and volatile-rich surface cause it to respond to big impacts in a somewhat Earth-like manner. Here we construct a simple globally-averaged model that tracks the flow of energy through the environment in the weeks, years, and millenia after a big comet strikes Titan. The model Titan is endowed with 1.4 bars of N2 and 0.07 bars of CH4, methane lakes, a water ice crust, and enough methane underground to saturate the regolith to the surface. We find that a nominal Menrva impact is big enough to raise the surface temperature by approx. 80 K and to double the amount of methane in the atmosphere. The extra methane drizzles out of the atmosphere over hundreds of years. An upper-limit Menrva is just big enough to raise the surface to water's melting point. The putative Hotei impact (a possible 800-1200 km diameter basin, Soderblom et al., 2009) is big enough to raise the surface temperature to 350-400 K. Water rain must fall and global meltwaters might range between 50 m to more than a kilometer deep, depending on the details. Global meltwater oceans do not last more than a few decades or centuries at most, but are interesting to consider given Titan's organic wealth. Significant near-surface clathrate formation is possible as Titan cools but faces major kinetic barriers.

Titan↗

Radioisotope Stirling Engine Powered Airship for Atmospheric and Surface Exploration of Titan

The feasibility of an advanced Stirling radioisotope generator (ASRG) powered airship for the near surface exploration of Titan was evaluated. The analysis did not consider the complete mission only the operation of the airship within the atmosphere of Titan. The baseline airship utilized two ASRG systems with a total of four general-purpose heat source (GPHS) blocks. Hydrogen gas was used to provide lift. The ASRG systems, airship electronics and controls and the science payload were contained in a payload enclosure. This enclosure was separated into two sections, one for the ASRG systems and the other for the electronics and payload. Each section operated at atmospheric pressure but at different temperatures. The propulsion system consisted of an electric motor driving a propeller. An analysis was set up to size the airship that could operate near the surface of Titan based on the available power from the ASRGs. The atmospheric conditions on Titan were modeled and used in the analysis. The analysis was an iterative process between sizing the airship to carry a specified payload and the power required to operate the electronics, payload and cooling system as well as provide power to the propulsion system to overcome the drag on the airship. A baseline configuration was determined that could meet the power requirements and operate near the Titan surface. From this baseline design additional trades were made to see how other factors affected the design such as the flight altitude and payload mass and volume.

Titan↗

Organic Ices in Titan’s Stratosphere

Titan’s stratospheric ice clouds are by far the most complex of any observed in the solar system, with over a dozen organic vapors condensing out to form a suite of pure and co-condensed ices, typically observed at high winter polar latitudes. Once these stratospheric ices are formed, they will diffuse throughout Titan’s lower atmosphere and most will eventually precipitate to the surface, where they are expected to contribute to Titan’s regolith. Early and important contributions were first made by the InfraRed Interferometer Spectrometer (IRIS) on Voyager 1, followed by notable contributions from IRIS’ successor, the Cassini Composite InfraRed Spectrometer (CIRS), and to a lesser extent, from Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) and the Imaging Science Subsystem (ISS) instruments. All three remote sensing instruments made new ice cloud discoveries, combined with monitoring the seasonal behaviors and time evolution throughout Cassini’s 13-year mission tenure. A significant advance by CIRS was the realization that co-condensing chemical compounds can account for many of the CIRS-observed stratospheric ice cloud spectral features, especially for some that were previously puzzling, even though some of the observed spectral features are still not well understood. Relevant laboratory transmission spectroscopy efforts began just after the Voyager encounters, and have accelerated in the last few years due to new experimental efforts aimed at simulating co-condensed ices in Titan’s stratosphere. This review details the current state of knowledge regarding the organic ice clouds in Titan’s stratosphere, with perspectives from both an observational and experimental standpoint.

Ices↗

Preliminary XANES Analysis of Laboratory Analogs of Titan Tholins

Titan, the largest moon of Saturn, is a fascinating object. It is the only other object in the Solar System, besides Earth, with a dense (1.5 bar at the surface) atmosphere whose composition is dominated by N2, with CH4 as the second most abundant gas. A complex organic chemistry between N2 and CH4, induced by solar UV photons and energetic particles, results in the formation of a large variety of organic compounds, including hydrocarbons (e.g., C2H2, C2H4, C2H6, C3H4, C6H6), nitriles (e.g., HCN, HNC, HC3N, CH3CN, C2N2), as well as larger molecules that include aromatic and heteroaromatic compounds [1]. This complex organic chemistry also leads to the formation of aerosols that play an important role in Titan’s atmospheric dynamics, climate, as well as surface composition and processes. Because of its N2-based dense atmosphere, and its CH4 cycle that resembles the hydrological cycle on Earth, Titan is often considered to be an analog of early Earth. In recent years, Titan’s atmosphere and surface were monitored in detail by the NASA Cassini mission, which orbited the Saturnian system from 2004 to 2017, as well as the ESA Huygens probe, which plunged into Titan’s atmosphere and landed on its surface in 2005.

Titan↗

Propyne: Determination of Physical Properties and Unit Cell Parameters under Titan-Relevant Conditions

With its large size, dense atmosphere, methane-based hydrological-like cycle, and diverse surface features, the Saturnian moon Titan is one of the most unique of the outer Solar System satellites. Study of the photochemically produced molecules in Titan’s atmosphere is critical in order to understand the mechanics of the atmosphere and, by extension, the interactions between atmosphere, surface, and subsurface water ocean. One example is propyne vapor, a photochemically produced species in Titan’s upper atmosphere expected to condense in Titan’s stratosphere at lower altitudes. Propyne may also be a trace species in Titan’s stratospheric co-condensed ice clouds detected by the Cassini Composite InfraRed Spectrometer. Bulk structural characterization of propyne ice is currently incomplete and is lacking in published laboratory Raman spectra and X-ray diffraction data. Here, we present a laboratory characterization of propyne ice, including the first published X-ray diffraction and Raman spectroscopy results for propyne ice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature formation of polycyclic aromatic hydrocarbons in Titan’s atmosphere

The detection of benzene in Titan’s atmosphere led to the emergence of polycyclic aromatic hydrocarbons (PAHs) as potential nucleation agents triggering the growth of Titan’s orange-brownish haze layers. However, the fundamental mechanisms leading to the formation of PAHs in Titan’s low-temperature atmosphere have remained elusive. We provide persuasive evidence through laboratory experiments and computations that prototype PAHs like anthracene and phenanthrene (C 14 H 10 ) are synthesized via barrierless reactions involving naphthyl radicals (C 10 H 7 •) with vinylacetylene (CH 2 =CH–C≡CH) in low-temperature environments. These elementary reactions are rapid, have no entrance barriers, and synthesize anthracene and phenanthrene via van der Waals complexes and submerged barriers. This facile route to anthracene and phenanthrene—potential building blocks to complex PAHs and aerosols in Titan—signifies a critical shift in the perception that PAHs can only be formed under high-temperature conditions, providing a detailed understanding of the chemistry of Titan’s atmosphere by untangling elementary reactions on the most fundamental level.

79 ASTRONOMY AND ASTROPHYSICS↗

TITAN'S BULK COMPOSITION CONSTRAINED BY CASSINI-HUYGENS: IMPLICATION FOR INTERNAL OUTGASSING

In the present report, by using a series of data gathered by the Cassini-Huygens mission, we constrain the bulk content of Titan's interior for various gas species (CH{sub 4}, CO{sub 2}, CO, NH{sub 3}, H{sub 2}S, Ar, Ne, Xe), and we show that most of the gas compounds (except H{sub 2}S and Xe) initially incorporated within Titan are likely stored dissolved in the subsurface water ocean. CO{sub 2} is likely to be the most abundant gas species (up to 3% of Titan's total mass), while ammonia should not exceed 1.5 wt%. We predict that only a moderate fraction of CH{sub 4}, CO{sub 2}, and CO should be incorporated in the crust in the form of clathrate hydrates. By contrast, most of the H{sub 2}S and Xe should be incorporated at the base of the subsurface ocean, in the form of heavy clathrate hydrates within the high-pressure ice layer. Moreover, we show that the rocky phase of Titan, assuming a composition similar to CI carbonaceous chondrites, is a likely source for the noble gas isotopes ({sup 40}Ar, {sup 36}Ar, {sup 22}Ne) that have been detected in the atmosphere. A chondritic core may also potentially contribute to the methane inventory. Our calculations show that a moderate outgassing of methane containing traces of neon and argon from the subsurface ocean would be sufficient to explain the abundance estimated by the Gas Chromatograph Mass Spectrometer. The extraction process, implying partial clathration in the ice layers and exsolvation from the water ocean, may explain why the {sup 22}Ne/{sup 36}Ar ratio in Titan's atmosphere appears higher than the ratio in carbonaceous chondrites.

79 ASTRONOMY AND ASTROPHYSICS↗

ALMA OBSERVATIONS OF HCN AND ITS ISOTOPOLOGUES ON TITAN

We present sub-millimeter spectra of HCN isotopologues on Titan, derived from publicly available ALMA flux calibration observations of Titan taken in early 2014. We report the detection of a new HCN isotopologue on Titan, H{sup 13}C{sup 15}N, and confirm an earlier report of detection of DCN. We model high signal-to-noise observations of HCN, H{sup 13}CN, HC{sup 15}N, DCN, and H{sup 13}C{sup 15}N to derive abundances and infer the following isotopic ratios: {sup 12}C/{sup 13}C = 89.8 ± 2.8, {sup 14}N/{sup 15}N = 72.3 ± 2.2, D/H = (2.5 ± 0.2) × 10{sup −4}, and HCN/H{sup 13}C{sup 15}N = 5800 ± 270 (1 σ errors). The carbon and nitrogen ratios are consistent with and improve on the precision of previous results, confirming a factor of ∼2.3 elevation in {sup 14}N/{sup 15}N in HCN compared to N{sub 2} and a lack of fractionation in {sup 12}C/{sup 13}C from the protosolar value. This is the first published measurement of D/H in a nitrile species on Titan, and we find evidence for a factor of ∼2 deuterium enrichment in hydrogen cyanide compared to methane. The isotopic ratios we derive may be used as constraints for future models to better understand the fractionation processes occurring in Titan’s atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

SUPRATHERMAL ELECTRONS IN TITAN’S SUNLIT IONOSPHERE: MODEL–OBSERVATION COMPARISONS

The dayside ionosphere of the Saturnian satellite Titan is generated mainly from photoionization of N{sub 2} and CH{sub 4}. We compare model-derived suprathermal electron intensities with spectra measured by the Cassini Plasma Spectrometer/Electron Spectrometer (CAPS/ELS) in Titan's sunlit ionosphere (altitudes of 970–1250 km) focusing on the T40, T41, T42, and T48 Titan flybys by the Cassini spacecraft. The model accounts only for photoelectrons and associated secondary electrons, with a main input being the impinging solar EUV spectra as measured by the Thermosphere Ionosphere Mesosphere Energy and Dynamics/Solar EUV Experiment and extrapolated to Saturn. Associated electron-impact electron production rates have been derived from ambient number densities of N{sub 2} and CH{sub 4} (measured by the Ion Neutral Mass Spectrometer/Closed Source Neutral mode) and related energy-dependent electron-impact ionization cross sections. When integrating up to electron energies of 60 eV, covering the bulk of the photoelectrons, the model-based values exceed the observationally based values typically by factors of ∼3 ± 1. This finding is possibly related to current difficulties in accurately reproducing the observed electron number densities in Titan's dayside ionosphere. We compare the utilized dayside CAPS/ELS spectra with ones measured in Titan's nightside ionosphere during the T55–T59 flybys. The investigated nightside locations were associated with higher fluxes of high-energy (>100 eV) electrons than the dayside locations. As expected, for similar neutral number densities, electrons with energies <60 eV give a higher relative contribution to the total electron-impact ionization rates on the dayside (due to the contribution from photoelectrons) than on the nightside.

79 ASTRONOMY AND ASTROPHYSICS↗

Mapping Vinyl Cyanide and Other Nitriles in Titan’s Atmosphere Using ALMA

Vinyl cyanide (C{sub 2}H{sub 3}CN) is theorized to form in Titan’s atmosphere via high-altitude photochemistry and is of interest regarding the astrobiology of cold planetary surfaces due to its predicted ability to form cell membrane-like structures (azotosomes) in liquid methane. In this work, we follow up on the initial spectroscopic detection of C{sub 2}H{sub 3}CN on Titan by Palmer et al. with the detection of three new C{sub 2}H{sub 3}CN rotational emission lines at submillimeter frequencies. These new, high-resolution detections have allowed for the first spatial distribution mapping of C{sub 2}H{sub 3}CN on Titan. We present simultaneous observations of C{sub 2}H{sub 5}CN, HC{sub 3}N, and CH{sub 3}CN emission, and obtain the first (tentative) detection of C{sub 3}H{sub 8} (propane) at radio wavelengths. We present disk-averaged vertical abundance profiles, two-dimensional spatial maps, and latitudinal flux profiles for the observed nitriles. Similarly to HC{sub 3}N and C{sub 2}H{sub 5}CN, which are theorized to be short-lived in Titan’s atmosphere, C{sub 2}H{sub 3}CN is most abundant over the southern (winter) pole, whereas the longer-lived CH{sub 3}CN is more concentrated in the north. This abundance pattern is consistent with the combined effects of high-altitude photochemical production, poleward advection, and the subsequent reversal of Titan’s atmospheric circulation system following the recent transition from northern to southern winter. We confirm that C{sub 2}H{sub 3}CN and C{sub 2}H{sub 5}CN are most abundant at altitudes above 200 km. Using a 300 km step model, the average abundance of C{sub 2}H{sub 3}CN is found to be 3.03 ± 0.29 ppb, with a C{sub 2}H{sub 5}CN/C{sub 2}H{sub 3}CN abundance ratio of 2.43 ± 0.26. Our HC{sub 3}N and CH{sub 3}CN spectra can be accurately modeled using abundance gradients above the tropopause, with fractional scale-heights of 2.05 ± 0.16 and 1.63 ± 0.02, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗