Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THORIUM OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Chromatographic separation of the theranostic radionuclide 111 Ag from a proton irradiated thorium matrix

Column chromatographic methods have been developed to separate no-carrier-added 111 Ag from proton irradiated thorium targets and associated fission products as an ancillary process to an existing 225 Ac separation design. In this paper, we report the separation of 111 Ag both prior and subsequent to 225 Ac recovery using CL resin, a solvent impregnated resin (SIR) that carries an organic solution of alkyl phosphine sulfides (R 3 P = S) and alkyl phosphine oxides (R 3 P = O). The recovery yield of 111 Ag was 93 ± 9% with a radiochemical purity of 99.9% (prior) and 87 ± 9% with a radiochemical purity of 99.9% (subsequent to) 225 Ac recovery. Both processes were successfully performed with insignificant impacts on 225 Ac yields or quality. Measured equilibrium distribution coefficients for silver and ruthenium (a residual contaminant) on CL resin in hydrochloric and nitric acid media are reported, to the best of our knowledge, for the first time. Finally and additionally, measured cross sections for the production of 111 Ag and 110m Ag for the 232 Th(p,f) 110m,111 Ag reactions are reported within.

111Ag↗

Economic Extraction, Recovery and Upgrading of Rare Earth Elements from Coal-Based Resources (Final Report)

The overall objective of this project is to produce a rare earth elements product with greater than 8% rare earth elements from coal-based resources using an economically viable and environmentally benign processing methodology. The objective of the coal processing work will be to acquire appropriate coal feed and produce a viable clean coal product, a concentrated REE feed stream, and a pyrite stream (where available) that can be used to enhance leaching. The objective of the bio-oxidation portion of the project is to utilize bacteria to oxidize sulfide minerals and ferrous ions to ferric ions to accelerate leaching and remove the sulfides to prevent future acid mine drainage and related liabilities. The objective of the solution conditioning work is to remove iron and control leaching solution conditions to facilitate extraction of REEs without significant thorium extraction. The objective of the column leaching work is to engineer/model and simulate heap leaching to demonstrate low-cost extraction of REEs from coal-based resources. The objective of the solvent extraction work is to selectively extract and recover through controlled stripping of REEs that are solubilized through leaching. The objective of the precipitation portion of the project is to recover the REEs from the solvent extraction stripping solutions and dry them to achieve the final product of rare earth elements that is > 8 % REEs. The objective of the technical, economic, and environmental analysis is to determine the overall viability of the processing approach that is demonstrated in this project

01 COAL, LIGNITE, AND PEAT↗

Multiple recycle of REMIX fuel at VVER-1000 operation in closed fuel cycle

The basic features of loading the VVER-1000 core with a new variant of REMIX fuel (REgenerated MIXture of U–Pu oxides) are considered during its multiple recycle in a closed nuclear fuel cycle. The fuel composition is produced on the basis of the uranium–plutonium regenerate extracted at processing the spent nuclear fuel (SNF) from a VVER-1000, depleted uranium, and the fissionable material: {sup 235}U as a part of highly enriched uranium (HEU) from warheads superfluous for defense purposes or {sup 233}U accumulated in thorium blankets of fusion (electronuclear) neutron sources or fast reactors. Production of such a fuel assumes no use of natural uranium in addition. When converting a part of the VVER-1000 reactors to the closed fuel cycle based on the REMIX technology, the consumption of natural uranium decreases considerably, and there is no substantial degradation of the isotopic composition of plutonium or change in the reactor-safety characteristics at the passage from recycle to recycle.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A scintillating fission detector for neutron flux measurements

Neutron flux monitors are commonly used for a variety of nuclear physics applications. A scintillating neutron detector, consisting of a liquid scintillator loaded with fissionable material, has been developed, characterized, and tested in the beam line at the Los Alamos Neutron Science Center, and shows a significant improvement in neutron sensitivity compared with a conventional fission chamber. Recent research on nanocomposite-based scintillators for gamma-ray detection indicates that this approach can be extended to load nanoparticles of fissionable material into a scintillating matrix, with up to three orders of magnitude higher loading than typical fission chambers. This will result in a rugged, cost-efficient detector with high efficiency, a short signal rise time, and the ability to be used in low neutron-flux environments. Initial efforts to utilize the luminescence of uranyl oxide to eliminate the need for wavelength-shifting dyes were unsuccessful. Excitation of uranyl compounds has been reported at wavelengths ranging from 266 nm to 532 nm. However, neither the 300 nm emission of toluene, nor the 350 nm emission of PPO, nor the 410 nm emission of POPOP resulted in significant excitation of and emission by uranyl oxide. As indicated by UV/visible spectroscopy, light emitted at these wavelengths was absorbed by the colored solution. {sup 235}U remains the most attractive candidate for a fissionable scintillator, due to its high fission cross-section and lack of a threshold fission energy, but all solutions containing molecular uranium compounds will be colored, most more highly than the U{sup 6+} compounds used here. Research is therefore continuing toward the fabrication of uranium nanoparticles, in which, due to Rayleigh scattering, the coloration should be less pronounced. The characterization of the thorium-loaded liquid scintillator and the fabrication of the 100 mL detectors for use at LANSCE demonstrated the feasibility of loading fissionable material into a liquid scintillator. Analysis of beam line experiments using the thorium-loaded scintillator is underway to determine the fission event rate in the detector, for comparison with a conventional fission chamber as well as with an unloaded liquid scintillator.

36 MATERIALS SCIENCE↗

New NDA Methods for Thorium Fuel Cycle Safeguards (Final Report)

This project developed portable Neutron Resonance Transmission Analysis (pNRTA) as a new non-destructive assay (NDA) method for thorium fuel cycles safeguards and other applications where multiple isotopes must be measured when present together. pNRTA leverages epithermal neutron resonances to assay multiple safeguards-relevant isotopes (e.g., 233 U and 235 U) when they are present together in a sample. Existing techniques are challenged by this task, driving the need for new active interrogation methods. With selected detectors, pNRTA works in high gamma-ray backgrounds from fission and activation products and 232 U progeny expected in thorium fuel cycle samples. This project leveraged a pNRTA system developed at Pacific Northwest National Laboratory (PNNL) and collaboration with the Massachusetts Institute of Technology (MIT). The system uses a commercially available deuterium-tritium (DT) neutron generator at short standoff (2 m). Key achievements in this project included: first-of-a-kind pNRTA quantitative measurements of 233 U oxide samples, an assessment of neutron detector technologies suitable for pNRTA in high gamma-ray background environments, experimentally demonstrating quantitative assay of samples containing 233 U and 235 U, and modeling studies showing the applicability of pNRTA to a wide range of material forms. Further, a custom algorithm was developed at MIT, which provided mean bias of 9% and relative standard deviation of 36% in assaying 233 U, 235 U, 238 U, and 232 Th content in eight measured samples. These outcomes form a solid technical basis for pNRTA as a new promising capability for international safeguards verification that is portable, non-destructive, quantitative, and isotopic specific.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Identifying the speciation of salt-based actinides in the presence of contaminants [Slides]

Molten salt reactors (MSR) present advantages over light water reactors, such as higher safety and energy efficiency, convenient waste processing, and the ability to use more abundant thorium instead of uranium as the fuel source. However, due to the high temperatures associated with these reactors the reactor container corrosion product can have a high influence on the molten salt system, and they are considered as a part of the fuel salt system. It is essential to have a comprehensive understanding of the chemical reactions that are occurring in the molten salt in the presence of contaminants such as nickel, manganese, chromium chlorides and oxides. Because they can change the local structure of these salts and the local structures of these salts govern the thermophysical properties of the molten salts, which would determine the safety and operational parameters of the reactor. This study is focused on identifying f-element materials speciation resulting from reaction with corrosion/degradation products in a molten salt environment to understand the flow of MSR. In this work, f-element chlorides are mixed with alkali and alkali earth metals and corrosion products such as transition metal chlorides are introduced systematically, inside a glovebox. Then these are heated to around 700 ? and slowly cooled to room temperature. Afterwards, these are analyzed using different characterization techniques such as powder X-ray diffraction, UV-vis and Raman spectroscopy and solid-state NMR. The initial work was conducted with lanthanide chlorides as a surrogate for actinides and the acquired data strongly indicates that in the presence of corrosion products new phase formation/ change in coordination environments occurs. This work has been presented at multiple conference presentations. The proposed work would allow to extend this work to actinides (depleted uranium and thorium) and this would assist to identify the speciation of actinide chloride in the presence of corrosion products. Also, this work would open an opportunity to compare the coordination behavior of lanthanides with the actinides.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗

Atomistically-informed modeling of point defect clustering and evolution in irradiated ThO 2

A cluster dynamics (CD) model has been developed to investigate the nucleation and growth of point defect clusters, i.e., interstitial prismatic loops and nanoscale and sub-nanoscale voids, in ThO 2 during irradiation by energetic particles. The model considers cluster off-stoichiometry due to the asymmetry of point defect generation on the O and Th sublattices under irradiation, as well as the point defect diffusivities and the defect binding energies to clusters. The energies were established using detailed molecular dynamics simulations considering the statistical variability of cluster configuration. A high-order adaptive time-integration has been used to solve the model. The predicted loop density and their average size is in good agreement with reported experimental observations for proton irradiated ThO 2 at 600°C. In conclusion, the model did not predict void evolution due to the sluggish kinetics of cation vacancies, explaining the absence of voids in proton irradiated ThO 2 (and other oxides) at relatively low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Developments that are making the Versa-Pac Indeed More Versatile (and More Useful to Industry) - 16267

Daher-TLI acquired the assets and employees of Century Industries, a radioactive material packaging manufacturing facility, in 2013. Included in that acquisition was the Versa-Pac Shipping Package. The Versa-Pac is an NRC licensed Type AF packaging (Certificate of Compliance no. USA/9342/AF-96) and was originally designed as a replacement for standard 7A drum-type transportation packaging. It can be used directly or in conjunction with pails, drums or inserts that can be manufactured to accommodate a variety of smaller containers and vessels. The Versa-Pac comes in two sizes, the VP-55 (i.e., 55-gallon drum version) and VP-110 (i.e., 110-gallon drum version). It features a patented design concept in combination with the drum exterior to provide enhanced structural protection to payloads under Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC), per 10CFR71.71 and 10CFR71.73 respectively. Since its introduction in 2010, the Versa-Pac has been utilized mainly as a one-time use package for disposing of radioactive waste. The package is also designed as a reusable package for transporting front-end materials. Discussions with current and prospective clients have resulted in numerous improvements, accomplished and planned, to the package's payload capability through additional engineering analyses and actual design modifications. Revision 10 to the NRC Certificate of Compliance, dated August 6, 2015, introduces an enrichment-loading table that allows shipping larger quantities of U-235 for enrichments less than 100 wt.%. It also authorizes shipment of natural thorium. Other planned and proposed improvements include provisions to transport UF{sub 6} in 1S, 2S, and 5B cylinders, design changes that further increases the amount of U-235 at enrichments less than 100 wt.%, increasing the capacity of the VP-110, developing a lighter 30-gallon version, the VP-30, and introducing content limits specific to uranium-oxides in multiple forms. This paper traces the engineering and design efforts involved in expanding the Versa-Pac's versatility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Comparison of Ce( iv )/Th( iv )-alkynyl complexes and observation of a trans -influence ligand series for Ce( iv )

Organometallic cerium(iv) complexes have been challenging to isolate and characterize due to the strongly oxidizing nature of the cerium(iv) cation. Herein, we report two cerium(iv) alkynyl complexes, [Ce(TriNOx)(C[triple bond, length as m-dash]C-SiMe3)] (1-CeTMS) and [Ce(TriNOx)(C[triple bond, length as m-dash]C-Ph)] (1-CePh) (TriNOx3- = tris(2-tert-butylhydroxylaminato)benzylamine), that include terminal alkyne moieties. The isostructural thorium analogue [Th(TriNOx)(C[triple bond, length as m-dash]C-SiMe3)] (1-ThTMS) was also synthesized and compared with 1-CeTMS in bond distance, 13C-NMR spectra, vibrational spectra and electronic structure. The Ce-C bond distances were 2.501(3) Å for 1-CePh and 2.513(5) Å for 1-CeTMS on the shorter end of the few reported CeIV-C single bonds (2.478(3)-2.705(2) Å), possibly indicating significant Ce 5d- and 4f-orbital involvement. 13C-NMR spectroscopy was also consistent with Ce-C covalency, with significantly deshielded resonances ranging from 185-213 ppm. Such 13C-NMR shifts demonstrate a strong influence from spin-orbit coupling (SOC) effects, corroborated by computational studies. Raman analysis showed ν C[triple bond, length as m-dash]C stretching frequencies of 2000 cm-1 (1-CeTMS) and 2052 cm-1 (1-CePh), indicating the cerium(iv)-alkynyl interaction, compared to the parent HC[triple bond, length as m-dash]CPh (IR = 2105 cm-1 and Raman = 2104 cm-1). L3-edge X-ray absorption measurements revealed a predominant Ce(iv) electronic configuration, and magnetic measurements revealed temperature-independent paramagnetism. Electrochemical studies similarly revealed the electron donating ability of the alkynyl ligands, stronger than either fluoride or imido ligands for the Ce(iv)(TriNOx)-framework, with a cerium(iv/iii) reduction potential of E pc = -1.58 to -1.66 V vs. Fc/Fc+. Evidence for a trans-influence has been observed by evaluating a series including previously reported [CeIV(TriNOx)X]+/0 complexes with axial ligands X = THF, I-, Br-, Cl-, F-, -C[triple bond, length as m-dash]C-Ph, -C[triple bond, length as m-dash]C-SiMe3, -NH(3,5-(CF3)2-Ar), -OSiPh3, -N(M(L))(3,5-(CF3)2-Ar) [M(L) = Li(TMEDA), K(DME)2 or Cs(2,2,2-crypt)]. These data stand in contrast with previous reports of an inverse trans-influence at cerium(iv) and point to differences in involvement of cerium 4f- versus 5d-orbitals in the electronic structures of the complexes.

Yang, Qiaomu↗

Phase stability of some actinides with brannerite structure at high pressures

Structure behavior of actinide brannerites ThTi{sub 2}O{sub 6}, Y{sub 0.5}U{sub 0.5}Ti{sub 1.5}Nb{sub 0.5}O{sub 6} and their analog oxide CeTi{sub 2}O{sub 6} was studied at high pressure by using in situ x-ray diffraction, Raman scattering and infra-red absorption techniques, respectively. Brannerite structure was found to be not stable and started to become amorphous at pressures above 20 GPa. Some minor crystalline phase(s) due to phase decomposition was observed in all the three samples during pressurization. In addition, the observed bulk modulus indicated that the actinide-bearing brannerites are more compressible than their analog compound CeTi{sub 2}O{sub 6}, which may be related to the asymmetric 5f electron orbits of actinide elements. - Graphical abstract: Actinide-bearing compounds with brannerite structure and their analog CeTi{sub 2}O{sub 6} are not stable at high pressure. They were amorphized after {approx}20 GPa and a minor pressure-induced phase transition or decomposition process was always observed before amorphization. Highlights: > Phase stability of three brannerites CeTi{sub 2}O{sub 6}, ThTi{sub 2}O{sub 6}, and (U,Y)(Ti,Nb){sub 2}O{sub 6} at high pressures. > Brannerite structure was not stable and became amorphous after {approx}20 GPa. > Actinide-bearing brannerites are easier compressed than their analog compound CeTi{sub 2}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dislocation loop evolution in Kr-irradiated ThO 2

Here, the early stage of microstructural evolution of ThO 2 , under krypton irradiation at 600, 800, and 1000°C, was investigated using in situ transmission electron microscopy (TEM). Dislocation loops grew faster, whereas their number density decreased with increasing irradiation temperature. Loop density was found to decrease with ion dose. Interstitial dislocation loops, including Frank loops with Burgers vector of $\textit{a}/3\langle111\rangle$ and perfect loops with Burgers vector of $\textit{a}/2\langle110\rangle$, were determined by traditional TEM and atomic resolution–scanning TEM techniques. Atomistic and mesoscale level modeling are performed to interpret experimental observations. The migration energy barriers of defects in ThO 2 were calculated using density-functional theory. The energetics of different dislocation loop types were studied using molecular dynamics simulations. Loop density and diameter were analyzed using a kinetic rate theory model that considers stoichiometric loop evolution. This analysis reveals that loop growth is governed by the mobility of cation interstitials, whereas loop nucleation is determined by the mobility of anion defects. Lastly, a rate theory model was used to extract the diffusion coefficients of thorium interstitials, oxygen interstitials, and vacancies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pilot Test Remediation of a Fractured Bedrock Aquifer at the Maywood Superfund Site, Maywood, New Jersey - 19217

The U.S. Army Corps of Engineers (USACE) and Cabrera Services are conducting a Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) Pilot Test treatment of a fractured bedrock aquifer at the Formerly Utilized Sites Remedial Action Program (FUSRAP) Maywood Superfund Site (FMSS) located in Maywood, New Jersey (NJ), USA. The Maywood Chemical Company Superfund Site in Bergen County, NJ is listed on the United States Environmental Protection Agency (USEPA) Superfund National Priorities List (NPL). The National Superfund Comprehensive Environmental Response, Compensation, and Liability Information System (CERCLIS) identification number is NJD980529762. The Maywood Chemical Company Superfund Site (hereafter referred to as the FMSS) consists of 92 designated properties in the communities of Maywood, Lodi and Rochelle Park, NJ. These are collectively known as FMSS 'Vicinity Properties' and include property owned by the federal government (the Maywood Interim Storage Site, or MISS); the Stepan Company (former location of the Maywood Chemical Works, or MCW); 62 residential properties; three properties owned by the state or federal government; four municipal properties; and 21 commercial properties. The Stepan Company property includes contaminated buildings and three remediated U.S. Nuclear Regulatory Commission (NRC) licensed burial pits; the MISS also includes a contaminated building. Contamination on the FMSS is being addressed under three separate actions coordinated by the lead regulator USEPA Region 2. The USACE is addressing thorium (Th) and other wastes at the site defined as 'FUSRAP waste' in the Soils and Buildings and Groundwater Records of Decision (ROD) for the FMSS. Stepan Company is addressing other chemical wastes (non-FUSRAP waste) at the FMSS. The Groundwater ROD [1] was signed into agreement by USACE Division Commander in June 2012 and USEPA Region 2 Administrator in July 2012 and presents the selected remedial actions for Operable Unit (OU) 2 groundwater at the MISS and adjacent properties. The selected remedial action is removal of non-radiologically contaminated soils on the MISS containing arsenic, lithium, and benzene with concentrations above cleanup levels, and monitored natural attenuation (MNA) of arsenic, lithium, and benzene in groundwater. In situ treatment of arsenic in the overburden aquifer using oxidation reduction (redox) alteration will also be performed if needed to meet the groundwater cleanup levels after the source soil is removed. The need for in situ treatment will be determined during the Groundwater ROD review at least three to four years after the contaminated source soil removal is completed. The third action addressing non-FUSRAP chemical wastes will be the responsibility of the Stepan Company as a primary responsible party in this action. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Pilot Test Remediation of a Fractured Bedrock Aquifer at the Maywood Superfund Site, Maywood, New Jersey - 20073

The U.S. Army Corps of Engineers (USACE) and Cabrera Services are conducting a Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) Pilot Test treatment of a fractured bedrock aquifer at the Formerly Utilized Sites Remedial Action Program (FUSRAP) Maywood Superfund Site (FMSS) located in Maywood, New Jersey (NJ), USA. The Maywood Chemical Company Superfund Site in Bergen County, NJ is listed on the United States Environmental Protection Agency (USEPA) Superfund National Priorities List (NPL). The National Superfund Comprehensive Environmental Response, Compensation, and Liability Information System (CERCLIS) identification number is NJD980529762. The Maywood Chemical Company Superfund Site (hereafter referred to as the FMSS) consists of 92 designated properties in the communities of Maywood, Lodi and Rochelle Park, NJ. These are collectively known as FMSS 'Vicinity Properties' and include property owned by the federal government (the Maywood Interim Storage Site, or MISS); the Stepan Company (former location of the Maywood Chemical Works, or MCW); 62 residential properties; three properties owned by the state or federal government; four municipal properties; and 21 commercial properties. The Stepan Company property includes contaminated buildings and three remediated U.S. Nuclear Regulatory Commission (NRC) licensed burial pits; the MISS also includes a contaminated building. Contamination on the FMSS is being addressed under three separate actions coordinated by the lead regulator USEPA Region 2. The USACE is addressing thorium (Th) and other wastes at the site defined as 'FUSRAP waste' in the Soils and Buildings and Groundwater Records of Decision (ROD) for the FMSS. Stepan Company is addressing other chemical wastes (non-FUSRAP waste) at the FMSS. The Groundwater ROD [1] was signed into agreement by USACE Division Commander in June 2012 and USEPA Region 2 Administrator in July 2012 and presents the selected remedial actions for Operable Unit (OU) 2 groundwater at the MISS and adjacent properties. The selected remedial action is removal of non-radiologically contaminated soils on the MISS containing arsenic, lithium, and benzene with concentrations above cleanup levels, and monitored natural attenuation (MNA) of arsenic, lithium, and benzene in groundwater. In situ treatment of arsenic in the overburden aquifer using oxidation reduction (redox) alteration will also be performed if needed to meet the groundwater cleanup levels after the source soil is removed. The need for in situ treatment will be determined during the Groundwater ROD review at least three to four years after the contaminated source soil removal is completed. The third action addressing non-FUSRAP chemical wastes will be the responsibility of the Stepan Company as a primary responsible party in this action. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Exploring Actinide Nanocrystal Growth towards Defining 5f Surface Chemistry (Final Technical Report)

When particles are very small, down to the nanometer length scale, they display unusual properties not typical of larger materials. Most of the atoms in these structures are at the surface of the particles, which give them different electronic properties. While these unusual properties have been studied in most of the periodic table, little is known about how the electronic properties of the actinides, such as neptunium and plutonium, behave when they become so small. This planned research will study growth pathways of actinide nanoscale particles. Interestingly, the shapes of the particles change depending on the specific actinide species, spanning from thorium through americium, despite having otherwise identical arrangements of atoms. This project will use differences in the shapes and growth pathways of different actinide particles to learn about trends in electronic properties at surfaces across the actinide row. Growth pathways will be determined using a combination of synthesis and the use of advanced X-ray characterization tools. These X-ray characterization tools can provide information about electronic properties and also local bonding characteristics. This project will also inform how to make unprecedented actinide oxide nanoparticles using very small quantities of material. This will enable safe working with radioactive materials and the study of materials that never before have been made into nanoparticles. Meanwhile, students will be trained in working with these exotic materials.

36 MATERIALS SCIENCE↗

Thermodynamics of CeSiO 4 : Implications for Actinide Orthosilicates

Zircon (ZrSiO 4 : I4 1 /amd) can accommodate actinides, such as thorium, uranium, and plutonium. The zircon structure has been determined for several of the end member compositions of other actinides, such as plutonium and neptunium. However, the thermodynamic properties of these actinide zircon structure-types are largely unknown due to the difficulties in synthesizing these materials and handling transuranium actinides. Thus, we have completed a thermodynamic study of cerium orthosilicate, stetindite (CeSiO 4 ), a surrogate of PuSiO 4 . For the first time, the standard enthalpy of formation of CeSiO 4 was obtained by high temperature oxide melt solution calorimetry to be -1971.9 ± 3.6 kJ/mol. Stetindite is energetically metastable with respect to CeO 2 and SiO 2 by 27.5 ± 3.1 kJ/mol. The metastability explains the rarity of the natural occurrence of stetindite and the difficulty of its synthesis. Applying the obtained enthalpy of formation of CeSiO 4 from this work, along with those previously reported for USiO 4 and ThSiO 4 , we developed an empirical energetic relation for actinide orthosilicates. Here, the predicted enthalpies of formation of AnSiO 4 are then made with a discussion of future strategies to efficiently immobilize Pu or minor actinides in the zircon structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The electronic structure of thorium monoxide: Ligand field assignment of states in the range 0–5 eV

Configuration interaction ligand field theory (CI LFT) calculations of the electronic energy levels of ThO were performed by treating the molecular electronic states as Th 2+ free-ion levels perturbed by the ligand field of O 2- . Twenty nine experimentally characterized ThO v = 0 energy levels, together with the energy difference between the v = 0 levels of the Y and W states were fitted using a CI LFT model that included Th 2+ 7s 2 , 6d7s, 6d 2 , 7s7p, 6d7p, 5f7s, and 7p 2 configurations. Predictions from these calculations were used to provide tentative assignments for 171 out of 250 ThO band heads listed by Gatterer et al. [“Molecular Spectra of Metallic Oxides”, Specola Vaticana (1957)]. Term energies for 30 electronic states have been determined based on these assignments. Subsequently, the CI LFT model was refined by fitting to a set of 59 electronic term energies. The inclusion of CI effects together with integer valence, atomic-in-molecule, ionic bonding ideas reveals atomic energy level patterns that are multiply replicated in the molecular energy level patterns of six Th 2+ O 2- atomic ion configurations (6d7s, 6d 2 , 7s7p, 6d7p, 5f7s, and 7p 2 ) revealing the underlying atomic ion structure that gives rise to the complex and seemingly erratic unassigned bands reported in the Vatican Atlas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RADIOACTIVE WASTE STREAMS FROM VARIOUS POTENTIAL NUCLEAR FUEL CYCLE OPTIONS

Five fuel cycle options, about which little is known compared to more commonly known options, have been studied in the past year for the United States Department of Energy. These fuel cycle options, and their features relative to uranium-fueled light water reactor (LWR)-based fuel cycles, include: • Advanced once-through reactor concepts (Advanced Once-Through, or AOT) – intended for high uranium utilization and long reactor operating life, use depleted uranium in some cases, and avoid or minimize used fuel reprocessing • Fission-fusion hybrid (FFH) reactor concepts – potential variations are intended for high uranium or thorium utilization, produce fissile material for use in power generating reactors, or transmute transuranic (TRU) and some radioactive fission product (FP) isotopes • High temperature gas reactor (HTGR) concepts - intended for high uranium utilization, high reactor thermal efficiencies; they have unique fuel designs • Molten salt reactor (MSR) concepts – can breed fissile U-233 from Th fuel and avoid or minimize U fuel enrichment, use on-line reprocessing of the used fuel, produce lesser amounts of long-lived, highly radiotoxic TRU elements, and avoid fuel assembly fabrication • Thorium/U-233 fueled LWR (Th/U-233) concepts – can breed fissile U-233 from Th fuel and avoid or minimize U fuel enrichment, and produce lesser amounts of long-lived, highly radiotoxic TRU elements. These fuel cycle options could result in widely different types and amounts of used or spent fuels, spent reactor core materials, and waste streams from used fuel reprocessing, such as: • Highly radioactive, high-burnup used metal, oxide, or inert matrix U and/or Th fuels, clad in Zr, steel, or composite non-metal cladding or coatings • Spent radioactive-contaminated graphite, SiC, carbon-carbon-composite, metal, and Be reactor core materials • Li-Be-F salts containing U, TRU, Th, and fission products • Ranges of separated or un-separated activation products, fission products, and actinides. Waste forms now used or studied for used LWR fuels can be used for some of these waste streams – but some waste forms may need to be developed for unique waste streams.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗