Results for “TECHNOLOGY ASSESSMENT” — Page 11

NASA NTRSDate not supplied

Technology Assessment for Producing Propellant From Lunar Water

Introduction: The presence of water ice in permanently shadowed regions (PSRs) on the lunar surface may enable a sustained human presence on the Moon with minimal need for consumables. One of the most valuable uses of lunar water is to produce rocket propellant. A sustained human presence on the Moon will re-quire frequent launches from the lunar surface, and each launch will require tons of propellant. However, many other volatiles are likely to be present in the areas where lunar water is stable1. Producing propellant from lunar water in-situ will require the separation and purification of water before it can be electrolyzed into oxygen and hydrogen gas. The Resource Exploration and Science of OUR Cosmic Environment (RESOURCE) project, funded by the Solar System Exploration Research Virtual Institute (SSERVI) program, includes a task to demonstrate the end-to-end process of water extraction, capture, purification and electrolysis to produce pure/dry oxygen gas sourced from an icy regolith mixture. Water Purification: The requirements for water purity are driven by the type of water electrolyzer used. For example, the water electrolyzer currently used on the International Space Station is based on proton ex-change membrane (PEM) technology. PEM-based electrolyzers require water to be ultrapure and deionized (>10 MegaOhm-cm) so that electrical conductivity is limited to the membranes themselves, where electrical current is used to convert H2O into H2 and O2.. A practical first step toward purifying water that is sourced from a lunar PSR is to use freeze distillation to separate water from other volatiles2. A sub-micronic filter can also be used to ensure that a minimal amount of dust is present in any lunar water that is captured. The combination of freeze distillation and sub-micronic filtration will result in relatively pure water but would require a deionization step if being fed into a PEM electrolyzer. Water Electrolysis: An alternative to PEM electrolysis is to use a Solid Oxide Electrolyzer (SOE). This technology operates at a much higher operating temperature (~800oC) and has a limited pressure range but does not require water to be ultrapure and deionized. Another advantage of SOE technology is that it produces pure dry oxygen gas without the need of an additional drying step. PEM electrolyzers produce humid oxygen gas and the humidity must be removed prior to liquefaction. Assessment: In order to compare PEM and SOE technologies side-by-side, they must be compared at a system level that includes water purification and gas drying steps. Engineers at the Johnson Space Center up-dated and utilized a detailed In-Situ Resource Utilization (ISRU) system model to compare and select the best option for the RESOURCE project which will conclude with a laboratory demonstration of the process of producing pure/dry oxygen from an icy regolith mixture in 2025.

A.J. Paz↗

NASA NTRSDate not supplied

Technology Assessment for Producing Propellant From Lunar Water

Introduction: The presence of water ice in permanently shadowed regions (PSRs) on the lunar surface may enable a sustained human presence on the Moon with minimal need for consumables. One of the most valuable uses of lunar water is to produce rocket propellant. A sustained human presence on the Moon will re-quire frequent launches from the lunar surface, and each launch will require tons of propellant. However, many other volatiles are likely to be present in the areas where lunar water is stable1. Producing propellant from lunar water in-situ will require the separation and purification of water before it can be electrolyzed into oxygen and hydrogen gas. The Resource Exploration and Science of OUR Cosmic Environment (RESOURCE) project, funded by the Solar System Exploration Research Virtual Institute (SSERVI) program, includes a task to demonstrate the end-to-end process of water extraction, capture, purification and electrolysis to produce pure/dry oxygen gas sourced from an icy regolith mixture. Water Purification: The requirements for water purity are driven by the type of water electrolyzer used. For example, the water electrolyzer currently used on the International Space Station is based on proton ex-change membrane (PEM) technology. PEM-based electrolyzers require water to be ultrapure and deionized (>10 MegaOhm-cm) so that electrical conductivity is limited to the membranes themselves, where electrical current is used to convert H2O into H2 and O2.. A practical first step toward purifying water that is sourced from a lunar PSR is to use freeze distillation to separate water from other volatiles2. A sub-micronic filter can also be used to ensure that a minimal amount of dust is present in any lunar water that is captured. The combination of freeze distillation and sub-micronic filtration will result in relatively pure water but would require a deionization step if being fed into a PEM electrolyzer. Water Electrolysis: An alternative to PEM electrolysis is to use a Solid Oxide Electrolyzer (SOE). This technology operates at a much higher operating temperature (~800oC) and has a limited pressure range but does not require water to be ultrapure and deionized. Another advantage of SOE technology is that it produces pure dry oxygen gas without the need of an additional drying step. PEM electrolyzers produce humid oxygen gas and the humidity must be removed prior to liquefaction. Assessment: In order to compare PEM and SOE technologies side-by-side, they must be compared at a system level that includes water purification and gas drying steps. Engineers at the Johnson Space Center up-dated and utilized a detailed In-Situ Resource Utilization (ISRU) system model to compare and select the best option for the RESOURCE project which will conclude with a laboratory demonstration of the process of producing pure/dry oxygen from an icy regolith mixture in 2025.

ISRU↗

NASA NTRS1976

Technology assessment of future intercity passenger transporation systems. Volume 2: Identification of issues affecting intercity transportation

Papers on major issues and trends that affect the future of intercity transportation are presented. Specific areas covered include: political, social, technological, institutional, and economic mechanisms, the workings of which determine how future intercity transporation technologies will evolve and be put into service; the major issues of intercity transportation from the point of view of reform, including candidate transporation technologies; and technical analysis of trends affecting the evolution of intercity transportation technologies.

Source record↗

NASA NTRS1975

Generating social impact scenarios: A key step in making technology assessment studies

The MITRE methodological studies were conducted to define relevant questions in relation to the concept of total impact analysis and to provide a procedure for integrating diverse checklists of questions which trace the initial and secondary impacts of any major technological application or of society's attempts to respond to or redirect that application. Some of the results of that study are presented in tabular form.

Jones, M. V.↗

NASA NTRS1983

Advanced 3-V semiconductor technology assessment

Against a background of an extensive survey of the present state of the art in the field of III-V semiconductors for operation at microwave frequencies (or gigabit rate speeds), likely requirements of future space communications systems are identified, competing technologies and physical device limitations are discussed, and difficulties in implementing emerging technologies are projected. On the basis of these analyses, specific research and development programs required for the development of future systems components are recommended.

Nowogrodzki, M.↗

DOE OSTI2021

Technology Assessment on Low-Temperature Waste Heat Recovery in Industry

The purpose of this report is to discuss the magnitude of low-temperature waste heat available in the US manufacturing sector and to identify current and emerging low-temperature heat recovery technologies and equipment. The primary focus of the study is on the industries that produce the lowest-temperature waste heat: the chemical, primary metal, petroleum, nonmetallic mineral, fabricated metal, food, paper, and wood industries. In addition to identifying the waste streams, their characteristics, and currently available heat recovery technologies, the study also explored future research opportunities and economic barriers for recovery technology implementation. Special attention was given to applicable heat to power conversion technologies such as the organic Rankine cycle, thermoelectric conversion, and the supercritical CO 2 cycle. The study included investigations in research and new developments, including turbine and heat exchanger cost for waste heat to power systems, size, efficiency, and intermittency of waste heat streams.

30 DIRECT ENERGY CONVERSION↗

NASA NTRS1976

Technology assessment of future intercity passenger transportation systems. Volume 4: Scenarios

Four background scenarios that relate to alternative states of society in the next 25 to 50 years are described. The scenarios were developed for use in analyzing and evaluating alternative future intercity transportation technologies. The scenarios are based, in part, on discussions contained in the issue papers and, in part, on separate analysis of social and economic trends considered relevant for the evolution of intercity transportation.

Source record↗

DOE OSTI2018

Limited-view 3D Imaging Technology or “LV 3D Imaging” Technology Assessment

Limited View 3D or “LV 3D” imaging is important because it addresses a tech nology gap that has life, time, radiation dose and monetary-saving impacts. It provides something that currently does not exist and its potential products open a variety of technology domains in which SRNL could become competitive in. It can become a low cost, safer and alternative approach to conducting what is commonly referred to as computer tomographic imaging. This project develops a bucket list of technologies that will be needed to develop a portable system for conducting LV 3D imaging.

47 OTHER INSTRUMENTATION↗

DOE OSTI2013

Technology Assessment: Strategic Energy Analysis Center (SEAC) 2012 Highlights (Fact Sheet)

This fact sheet lists key analysis products produced by NREL in 2012. Like all NREL analysis products, these aim to increase the understanding of the current and future interactions and roles of energy policies, markets, resources, technologies, environmental impacts, and infrastructure. NREL analysis, data, and tools inform decisions as energy-efficient and renewable energy technologies advance from concept to commercial application.

1603↗

DOE OSTI2023

Hydrogen Shot Technology Assessment: Thermal Conversion Approaches

In July 2021 the United States (U.S.) Department of Energy (DOE) launched the first of a series of Department-wide Energy Earthshot™ goals designed to accelerate breakthroughs of more abundant, affordable, and reliable clean energy solutions within the decade. The Hydrogen Shot goal seeks to reduce the cost of clean hydrogen to $\$$1 per 1 kilogram in 1 decade ("1 1 1"). Today, thermal conversion of fossil fuels represents the predominant, lowest cost method of hydrogen production. In 2020 approximately 75 percent of global, dedicated hydrogen production was produced via fossil fuels using thermal conversion approaches such as steam reforming and gasification. However, carbon management techniques such as CO 2 capture and sequestration (CCS) and pyrolysis are not widely represented in the current fossil-based hydrogen production fleet. Lowering the cost of clean hydrogen production from commercial and advanced thermal conversion-based technologies is critical for successfully achieving the Hydrogen Shot goal. This report presents the findings from an initial screening analysis of several scenarios that explore cost drivers related to clean hydrogen production. The screening encompasses commercially available and developing thermal conversion technology alternatives as well as factors exogenous to the plant such as feedstock/byproduct pricing, CO 2 pipeline and storage infrastructure costs, and scale to assess potential pathways towards meeting the Hydrogen Shot goal. Additionally, this report presents initial Research and Development (R&D) strategies to advance thermal conversion technology towards meeting the Hydrogen Shot™ goal.

08 HYDROGEN↗

NASA NTRS1983

Advanced 3-V semiconductor technology assessment

Components required for extensions of currently planned space communications systems are discussed for large antennas, crosslink systems, single sideband systems, Aerostat systems, and digital signal processing. Systems using advanced modulation concepts and new concepts in communications satellites are included. The current status and trends in materials technology are examined with emphasis on bulk growth of semi-insulating GaAs and InP, epitaxial growth, and ion implantation. Microwave solid state discrete active devices, multigigabit rate GaAs digital integrated circuits, microwave integrated circuits, and the exploratory development of GaInAs devices, heterojunction devices, and quasi-ballistic devices is considered. Competing technologies such as RF power generation, filter structures, and microwave circuit fabrication are discussed. The fundamental limits of semiconductor devices and problems in implementation are explored.

Nowogrodzki, M.↗

NASA NTRS1976

Forty and 80 GHz technology assessment and forecast including executive summary

The results of a survey to determine current demand and to forecast growth in demand for use of the 40 and 80 GHz bands during the 1980-2000 time period are given. The current state-of-the-art is presented, as well as the technology requirements of current and projected services. Potential developments were identified, and a forecast is made. The impacts of atmospheric attenuation in the 40 and 80 GHz bands were estimated for both with and without diversity. Three services for the 1980-2000 time period -- interactive television, high quality three stereo pair audio, and 30 MB data -- are given with system requirements and up and down-link calculations.

Mazur, D. G.↗

NASA NTRS2008

Leak Detection and Location Technology Assessment for Aerospace Applications

Micro Meteoroid and Orbital Debris (MMOD) and other impacts can cause leaks in the International Space Station and other aerospace vehicles. The early detection and location of leaks is paramount to astronaut safety. Therefore this document surveys the state of the art in leak detection and location technology for aerospace vehicles.

Wilson, William C.↗

NASA NTRS2020

A Simulation Framework for Precision Landing and Hazard Avoidance Technology Assessments

To meet NASA’s challenge to return humans to the Moon in 2024 and establish a sustainable presence in 2028 requires advances in autonomous spacecraft navigation. The Safe and Precise Landing Integrated Capabilities Evolution (SPLICE) project, which leverages previous work at NASA to develop multi-mission precision landing and hazard avoidance technologies, is using a multi-faceted approach to achieve the advanced landing requirements. In addition to increasing the technology readiness level of key sensors and developing high performance space computing, SPLICE uses simulations to determine navigation requirements and evaluate sensor performance. The effort evaluates various precision landing concepts of operations, not only for the lunar human and robotic missions, but also for potential missions to other solar system destinations. This paper summarizes the six degree-of-freedom high fidelity simulation framework, trajectory design methodology, and sensor models being considered for a variety of precision lander missions. Initial results of the navigation sensor performance for a human Mars mission are presented. Finally, trade and sensitivity studies are outlined for future work to fully characterize sensor performance assumptions and modifications required to achieve precision landing and hazard avoidance.

Alicia Dwyer Cianciolo↗

DOE OSTI2020

Progress and Technology Assessment of Melt-Cast Ceramic Waste Forms

The Savannah River National Laboratory (SRNL) conducted research from FY2011 – FY2020 to develop ceramic waste forms to treat High-Level Waste (HLW) resulting from reprocessing of commercial Used Nuclear Fuel (UNF) as part of the Department of Energy (DOE) office of Nuclear Energy (NE) Fuel Cycle Technologies (FCT) research program. The objective of the research was to develop a reference ceramic waste form and process technology needed to immobilize the combined HLW raffinate stream, including undissolved solids and soluble technetium, and potentially the TRU waste stream resulting from reprocessing processes. This report compiles the relevant literature produced under, and pertinent to, the program objectives and provides a perspective on the technology development as well as prospects for future.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS1978

Materials technology assessment for Stirling engines

The objectives are to assess the current state-of-the-art of metals and ceramics that are potential candidate materials for hot components in the improved or advanced Stirling engines; identify materials research, development, and testing required to support the development of automotive Stirling engines; and recommend materials technology program plans to assure material readiness in time with the engine system development programs.

Stephens, J. R.↗

NASA NTRS2001

Technology Assessment of Laser-Assisted Materials Processing in Space

Lasers are useful for performing operations such as joining, machining, built-up freeform fabrication, shock processing, and surface treatments. These attributes are attractive for the supportability of longer-term missions in space due to the multi-functionality of a single tool and the variety of materials that can be processed. However, current laser technology also has drawbacks for space-based applications, specifically size, power efficiency, lack of robustness, and problems processing highly reflective materials. A review of recent laser developments will be used to show how these issues may be reduced and indicate where further improvement is necessary to realize a laser-based materials processing capability in space. The broad utility of laser beams in synthesizing various classes of engineering materials will be illustrated using state-of-the art processing maps for select lightweight alloys typically found on spacecraft. With the advent of recent breakthroughs in diode-pumped solid-state lasers and fiber optic technologies, the potential to perform multiple processing techniques is increasing significantly. Lasers with suitable wavelengths and beam properties have tremendous potential for supporting future space missions to the moon, Mars and beyond.

Nagarathnam, Karthik↗

NASA NTRS2001

Technology Assessment of Laser-Assisted Materials Processing in Space

Lasers are useful for performing operations such as joining, machining, built-up freeform fabrication, shock processing, and surface treatments. These attributes are attractive for the supportability of longer-term missions in space due to the multi-functionality of a single tool and the variety of materials that can be processed. However, current laser technology also has drawbacks for space-based applications, specifically size, power efficiency, lack of robustness, and problems processing highly reflective materials. A review of recent laser developments will be used to show how these issues may be reduced and indicate where further improvement is necessary to realize a laser-based materials processing capability in space. The broad utility of laser beams in synthesizing various classes of engineering materials will be illustrated using state-of-the art processing maps for select lightweight alloys typically found on spacecraft. With the advent of recent breakthroughs in diode-pumped solid-state lasers and fiber optic technologies, the potential to perform multiple processing techniques is increasing significantly. Lasers with suitable wavelengths and beam properties have tremendous potential for supporting future space missions to the moon, Mars and beyond.

Nagarathnam, Karthik↗