Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TAILINGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Kinematics of the ion tail of comet P/Swift-Tuttle

We have obtained long-slit high resolution spectra of the H2O(+) 6199 A complex in the near tail of comet P/Swift-Tuttle. The observations were made using the Hamilton echelle spectrometer fed by the Lick Observatory 0.6 m coude auxiliary telescope. For most of our observations, the spectral slit was aligned along the Sun-tail axis and the cometary nucleus was placed at one end of the slit, giving us spectra having the spatial and spectral resolution needed to measure the radial velocity and velocity dispersion continuously down the cometary tail out to a distance of 4X10(exp 5) km. The radial velocities confirm the earlier more restricted observations by Rauer & Jockers (1993) and by Wyckoff & Lindholm (1994) showing that the tail motions are indeed bulk flows in the antisolar direction. Out to 3X10(exp 5) km in the tail typical bulk flows are at a speed of approximately 30 km/s. The velocity dispersion, (sigma(sub r)), of the H2O(+) lines follows a pattern that is quite systematic; sigma(sub r) is smallest near the cometary nucleus, and steadily increases down the tail. The highest velocity dispersions are found ahead of the nucleus and off the tail axis. These velocity dispersions are equivalent to ion temperatures ranging from 10(exp 5) to 10(exp 6) K. We note a clear anticorrelation between the H2O(+) line intensities (related to the ion density) and the bulk flow and dispersion velocities; direct mass loading of the solar wind by the observed water ions may be responsible. We discuss several approximate equipartition methods used to infer local magnetic fields induced by the interaction of the cometary ions with the solar wind particle/field stream. Typical fields derived are near 50 nT. The measured tailward accelerations are consistent with this order of magnitude B field.

Spinrad, Hyron↗

Wind-Tunnel Investigation of Some Effects of Wing Sweep and Horizontal-Tail Height on the Static Stability of an Airplane Model at Transonic Speeds

A research model of an airplane with a configuration suitable for supersonic flight was tested at transonic speeds in order to establish the effects on longitudinal and lateral stability of certain changes in both wing sweep and height of the horizontal tail. Two wings of aspect ratio 3 and taper ratio 0.15, one having the quarter-chord line swept back 30 deg and the other 45 deg, were each tested with the horizontal tail of the model in a low and in a high position. One configuration was also tested with fuselage strakes. The tests were made at Mach numbers from 0.60 to 1.17 and Reynolds numbers from 1.9 x 10(exp 6) to 2.6 x 10(exp 6). The results indicated that a low horizontal-tail position (below the wing-chord plane) gave positive longitudinal stability for the model for all angles of attack used (angles of attack up to 24 deg); whereas, a higher tail position (above the wing-chord plane) resulted in a large reduction in stability at moderate angles of attack. With the higher horizontal tail, the 30 deg-swept-wing model had somewhat more stability than the 45 deg-swept-wing model at subsonic Mach numbers. With the lower tail, the 45 deg-swept-wing model had slightly more stability at all Mach numbers. The model with the 30 deg swept wing had greater directional stability with the tail in the higher rather than the lower position, but the opposite was true for the 45 deg-swept-wing model. The directional stability decreased sharply at high angles of attack; this characteristic was alleviated by the use of fuselage strakes which, however, proved to be detrimental to the longitudinal stability of the model tested.

Fisher, Lewis R.↗

Full-Scale Wind Tunnel Studies of F/A-18 Tail Buffet

Tail buffet studies were conducted on a full-scale, production, F/A-18, fighter aircraft in the 80- by 120-Foot Wind Tunnel of the National Full-Scale Aerodynamic Complex at NASA Ames Research Center in Moffett Field, California. The F/A-18 was tested over an angle-of-attack range of 18deg to 50deg, a side-slip range of -15deg to 15deg, and at wind speeds of up to 100 knots. The maximum speed corresponds to a Reynolds number of 12.3 x 10(exp 6) based on mean aerodynamic chord and a Mach number of 0.15. The port, vertical tail fin was instrumented with thirty-two surface pressure transducers, arranged in four by four arrays on both sides on the fin. The aircraft was also equipped with a removable Leading Edge eXtension (LEX) fence that is used on F/A-18 aircraft to reduce tail buffet loads. Time-averaged, power-spectral analysis results are presented for the tail fin bending moment derived from the integrated pressure field. The results are only for the zero side-slip condition, both with and without the LEX fence. The LEX fence significantly reduces the magnitude of the root-mean-square pressures and bending moments. Scaling issues are addressed by comparing full-scale results for pressures at the 60%-span and 45%-chord location with published results of small-scale, F/A-18 tail-buffet tests. The comparison shows that the tail buffet frequency scales very well with length and velocity. Root-mean-square pressures and power spectra do not scale as well. The LEX fence is shown to reduce tail buffet loads at all model scales.

Meyn, Larry A.↗

Tail Lobe Revisited: Magnetic Field Modeling Based on Plasma Data

Plasma data from the ISEE-1 and -2 spacecraft during 1977-1980 have been used to determine the distribution of data points in the magnetotail in the range of distances -20 < XGSM < --15, i.e. which of the records that were located in the current sheet, in the tail lobe, in the magnetosheath and in the boundary layers respectively. The ISEE-1 and -2 magnetic field data for the records in the tail lobe were then used to model the tail lobe magnetic field dependence on the solar wind dynamic pressure, on the Interplanetary Magnetic Field (IMF) and on the Dst index. The tail lobe magnetic field was assumed to be dependent on the square root of the dynamic pressure based on the balance between the total magnetic pressure in the tail lobes and the dynamic pressure of the solar wind. The IMF dependent terms, added to the pressure term, were sought in many different forms while the Dst dependence of the tail lobe magnetic field was assumed to be linear. The field shows a strong dependence on the square root of the dynamic pressure and the different IMF dependent terms all constitute a significant contribution to the total field. However, the dependence on the Dst index turned out to be very weak at those down-tail distances. The results of this study are intended to be used for parameterizing future versions of the data-based models of the global magnetospheric magnetic field.

Karlsson, S. B. P.↗

Wind-Tunnel Investigation at Subsonic and Supersonic Speeds of a Fighter Model Employing a Low-Aspect-Ratio Unswept Wing and a Horizontal Tail Mounted Well Above the Wing Plane - Longitudinal Stability and Control

Experimental results showing the static longitudinal-stability and control characteristics of a model of a fighter airplane employing a low-aspect-ratio unswept wing and an all-movable horizontal tail are presented. The investigation was made over a Mach number range from 0.60 to 0.90 and from 1.35 to 1.90 at a constant Reynolds number of 2.40 million, based on the wing mean aerodynamic chord. Because of the location of the horizontal tail at the tip of the vertical tail, interference was noted between the vertical tail and the horizontal tail and between the wing and the horizontal tail. This interference produced a positive pitching-moment coefficient at zero lift throughout the Mach number range of the tests, reduced the change in stability with increasing lift coefficient of the wing at moderate lift coefficients in the subsonic speed range, and reduced the stability at low lift coefficients at high supersonic speeds. The lift and pitching-moment effectiveness of the all movable tail was unaffected by the interference effects and was constant throughout the lift-coefficient range of the tests at each Mach number except 1.90.

Smith, Williard G.↗

Maven Observations of Tail Current Sheet Flapping at Mars

The Martian magnetotail is a complex regime through which atmospheric particles are lost to space. Our current understanding of Mars' tail continues to develop with the comprehensive particle and field data collected by Mars Atmosphere and Volatile EvolutioN (MAVEN). In this work, we identify periods when MAVEN encounters multiple current sheet crossings through a single tail traversal in order to understand tail dynamics. We apply an analysis technique that has been developed and validated by using multipoint measurements in order to separate the spatial and temporal properties associated with current sheet flapping. Events are classified into periods of steady flapping, due to a global motion of the current sheet, and kink-like flapping, resulting from localized wave propagation along the tail current sheet. Out of 106 periods during which multiple current sheet crossings were observed, 20 were due to steady flapping and 10 from kink-like flapping. A majority of the kink-like events resulted from waves propagating in the opposite direction of the solar wind convection electric field, regardless of their location in the tail, unlike at Earth and Venus. This finding suggests that possible magnetosphere energy sources, whereby plasma is accelerated and removed from the Martian environment, are not located in the central magnetotail; rather, these waves may be driven by a source located at the tail flank based on the direction of the solar wind electric field. Therefore, by identifying potential sources of impulsive energy release in the tail, we may better understand mechanisms that drive atmospheric loss at Mars.

Atmospheric Particles↗

MAVEN observations of tail current sheet flapping at Mars

The Martian magnetotail is a complex regime through which atmospheric particles are lost to space. Our current understanding of Mars' tail continues to develop with the comprehensive particle and field data collected by Mars Atmosphere and Volatile EvolutioN (MAVEN). In this work, we identify periods when MAVEN encounters multiple current sheet crossings through a single tail traversal in order to understand tail dynamics. We apply an analysis technique that has been developed and validated by using multipoint measurements in order to separate the spatial and temporal properties associated with current sheet flapping. Events are classified into periods of steady flapping, due to a global motion of the current sheet, and kink‐like flapping, resulting from localized wave propagation along the tail current sheet. Out of 106 periods during which multiple current sheet crossings were observed, 20 were due to steady flapping and 10 from kink‐like flapping. A majority of the kink‐like events resulted from waves propagating in the opposite direction of the solar wind convection electric field, regardless of their location in the tail, unlike at Earth and Venus. This finding suggests that possible magnetosphere energy sources, whereby plasma is accelerated and removed from the Martian environment, are not located in the central magnetotail; rather, these waves may be driven by a source located at the tail flank based on the direction of the solar wind electric field. Therefore, by identifying potential sources of impulsive energy release in the tail, we may better understand mechanisms that drive atmospheric loss at Mars.

Gina A. DiBraccio↗

“Tailing” Phenomenon During Polymer Propagation at The Milne Point Polymer Flood

Chemical flooding simulators traditionally assume that polymer retention follows the Langmuir isotherm, while fractional-flow calculations assume concentration-independent retention. Both models predict a delay in propagation of the polymer front (in proportion to the retention value), followed by a rapid rise in produced polymer concentration to the injected level. In contrast, laboratory retention studies for the Milne Point polymer flood (North Slope of Alaska) consistently show virtually no delay in polymer propagation, a rapid rise in produced polymer to 70-90% of the injected concentration, followed by produced concentration gradually approaching the injected value over many pore volumes. From a practical viewpoint, this behavior means that retention causes no significant delay in propagation of the polymer bank (and therefore the oil bank), but the effective viscosity and displacement efficiency are less than originally planned. This paper explores why this polymer “tailing” phenomenon occurs. During core floods, effluent was analyzed for brine-tracer concentration, viscosity, total organic carbon, and total nitrogen. The latter three items allowed three independent measures of polymer concentration and polymer retention. Experiments were performed with Milne Point core material, oil, brine, and conditions. Mechanistic experiments were also performed with packs of glass beads with controlled levels of various minerals. In Milne Point cores, the presence of the tailing phenomenon was not sensitive to flow rate, polymer concentration, core heterogeneity, or whether the core was preserved, cleaned of oil, or cleaned and resaturated with oil, or cleaned, re-saturated and aged with oil. The three independent measures of polymer concentration confirmed that the tailing phenomenon was not an artifact associated with polymer degradation or detection interferences. Tailing was also observed during mechanistic floods using glassbead packs when sufficient levels of illite or kaolinite were present. This observation was consistent with high levels of illite noted in Milne Point cores. The tailing was not noted during mechanistic floods that contained beads with montmorillonite, chlorite, calcium carbonate, dolomite, siderite, pyrite, or calcium sulfate. A model is proposed to account for the tailing phenomenon. This work suggests that mineralogy analysis (especially for illite and kaolinite) may reveal whether tailing should be accounted for during simulations of polymer propagation/retention in a given field application.

Seright, Randy↗

Wind-Tunnel Investigation of Effects of Unsymmetrical Horizontal-Tail Arrangements on Power-on Static Longitudinal Stability of a Single-Engine Airplane Model

A wind-tunnel investigation has been made to determine the effects of unsymmetrical horizontal-tail arrangements on the power-on static longitudinal stability of a single-engine single-rotation airplane model. Although the tests and analyses showed that extreme asymmetry in the horizontal tail indicated a reduction in power effects on longitudinal stability for single-engine single-rotation airplanes, the particular "practical" arrangement tested did not show marked improvement. Differences in average downwash between the normal tail arrangement and various other tail arrangements estimated from computed values of propeller-slipstream rotation agreed with values estimated from pitching-moment test data for the flaps-up condition (low thrust and torque) and disagreed for the flaps-down condition (high thrust and torque). This disagreement indicated the necessity for continued research to determine the characteristics of the slip-stream behind various propeller-fuselage-wing combinations. Out-of-trim lateral forces and moments of the unsymmetrical tail arrangements that were best from consideration of longitudinal stability were no greater than those of the normal tail arrangement.

AIRFOILS - NACA 65(216-012(MOD ) - CHAR & MOMENTS ↗

Changes in Zinc Speciation with Mine Tailings Acidification in a Semiarid Weathering Environment

High concentrations of residual metal contaminants in mine tailings can be transported easily by wind and water, particularly when tailings remain unvegetated for decades following mining cessation, as is the case in semiarid landscapes. Understanding the speciation and mobility of contaminant metal(loid)s, particularly in surficial tailings, is essential to controlling their phytotoxicities and to revegetating impacted sites. In prior work, we showed that surficial tailings samples from the Klondyke State Superfund Site (AZ, USA), ranging in pH from 5.4 to 2.6, represent a weathering series, with acidification resulting from sulfide mineral oxidation, long-term Fe hydrolysis, and a concurrent decrease in total (6000 to 450 mg kg{sup -1}) and plant-available (590 to 75 mg kg{sup -1}) Zn due to leaching losses and changes in Zn speciation. Here, we used bulk and microfocused Zn K-edge X-ray absorption spectroscopy (XAS) data and a six-step sequential extraction procedure to determine tailings solid phase Zn speciation. Bulk sample spectra were fit by linear combination using three references: Zn-rich phyllosilicate (Zn{sub 0.8}talc), Zn sorbed to ferrihydrite (Zn{sub adsFeOx}), and zinc sulfate (ZnSO{sub 4} {center_dot} 7H{sub 2}O). Analyses indicate that Zn sorbed in tetrahedral coordination to poorly crystalline Fe and Mn (oxyhydr)oxides decreases with acidification in the weathering sequence, whereas octahedral zinc in sulfate minerals and crystalline Fe oxides undergoes a relative accumulation. Microscale analyses identified hetaerolite (ZnMn{sub 2}O{sub 4}), hemimorphite (Zn{sub 4}Si{sub 2}O{sub 7}(OH){sub 2} {center_dot} H{sub 2}O) and sphalerite (ZnS) as minor phases. Bulk and microfocused spectroscopy complement the chemical extraction results and highlight the importance of using a multimethod approach to interrogate complex tailings systems.

54 ENVIRONMENTAL SCIENCES↗

Hot-tail electrons’ impact on assimilation and injection penetration of D2 shattered pellet injections

The assimilation and the penetration of injected materials play significant roles in the mitigation efficiency of shattered pellet injection (SPI) as a disruption mitigation system (DMS), hence an accurate description of the fragment ablation rate is desirable. Current mainstream 3D MHD codes modelling SPIs mostly assume instantaneous thermalization between the previously hot ambient electrons and the newly released cold electrons. This could result in underestimation of the ablation rate if the hot electron thermalization time is comparable or even longer than the fragment flying time across flux tubes, putting the validity of these 3D SPI simulations into question. To resolve this doubt, we, in this study, investigate the thermalization dynamics and the overall hot-electron impact. The finite-time collisional thermalization of hot-tail electrons in a rapidly cooling plasma, as well as the so-called ‘self-limiting’ effect are considered. The former effect tends to deplete the colder population within a hot-tail species, while the latter is found to preferentially deplete the higher energy population. The combined result is found to cause an almost self-similar decay of the hot electron distribution function, while its shape does not deviate much from that of Maxwellian distribution and the mean energy does not change much during the thermalization process. Based on this observation, axisymmetric JOREK D2 SPI simulations were carried out with additional hot-tail contribution to evaluate their overall impact onto the injection assimilation and penetration. It is found that the hot-tail effect indeed causes enhanced assimilation and shallower penetration, although the overall effect depends on the exact injection configuration, with the slow injection showing negligible hot-tail effect while the fast single non-shattered pellet case shows drastic hot-tail ablation enhancement. For ITER-like SPI parameters, there is no significant deviation in the total assimilation, but some deviation in the injection penetration is observed for the fast injection velocity cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transmission of Raccoon-Passaged Chronic Wasting Disease Agent to White-Tailed Deer

The transmission characteristics of prion diseases are influenced by host prion protein sequence and, therefore, the host species. Chronic wasting disease (CWD), a prion disease of cervids, has widespread geographical distribution throughout North America and occurs in both wild and farmed populations. CWD prions contaminate the environment through scattered excrement and decomposing carcasses. Fresh carcasses with CWD prions are accessible by free-ranging mesopredators such as raccoons and may provide a route of exposure. Previous studies demonstrated the susceptibility of raccoons to CWD from white-tailed deer. In this study, we demonstrate that white-tailed deer replicate raccoon-passaged CWD prions which results in clinical disease similar to intraspecies CWD transmission. Six white-tailed deer were oronasally inoculated with brain homogenate from a raccoon with CWD. All six deer developed clinical disease, had widespread lymphoid distribution of misfolded CWD prions (PrP Sc ), and had neuropathologic lesions with PrP Sc accumulation in the brain. The presence of PrP Sc was confirmed by immunohistochemistry, enzyme-linked immunoassay, and western blot. The western blot migration pattern of raccoon-passaged CWD was different from white-tailed deer CWD. Transmission of raccoon CWD back to white-tailed deer resulted in an interposed molecular phenotype that was measurably different from white-tailed deer CWD.

59 BASIC BIOLOGICAL SCIENCES↗

Variations in the Width, Density, and Direction of the Palomar 5 Tidal Tails

Stars that escape globular clusters form tidal tails that are predominantly shaped by the global distribution of mass in the Galaxy, but also preserve a historical record of small-scale perturbations. Using deep grz photometry from DECaLS, we present highly probable members of the tidal tails associated with the evaporating globular cluster Palomar 5. These data yield the cleanest view of a stellar stream beyond ≈20 kpc and reveal: (1) a wide, low surface-brightness extension of the leading tail; (2) significant density variations along the stream; and (3) sharp changes in the direction of both the leading and the trailing tail. In the fiducial Milky Way model, a rotating bar perturbs the Palomar 5 tails and can produce streams with similar width and density profiles to those observed. However, the deviations of the stream track in this simple model do not match those observed in the Palomar 5 trailing tail, indicating the need for an additional source of perturbation. These discoveries open up the possibility of measuring the population of perturbers in the Milky Way, including dark-matter subhalos, with an ensemble of stellar streams and deep photometry alone.

79 ASTRONOMY AND ASTROPHYSICS↗

Aerodynamic Loads on Tails at High Angles of Attack and Sideslip

Results are presented for the loads and moments acting on the individual tail surfaces of a body-tail combination over a wide range of angles of attack and sideslip. The effects of forebody length and panel-panel interference on the characteristics are included. It is shown that large nonlinear variations in these loads and moments, which occur at some combinations of angle of attack and sideslip, cannot be predicted by low-angle theory. A relatively simple, but general, theoretical method for calculating these load and moment characteristics is described, and the results from this method are found to be in good agreement with experiment provided the initial positions of the forebody vortices are known. It is shown that a simple application of slender-body theory can be used to predict the side loads due to sideslip that are contributed by a vertical tail on a wide variety of wing-body-tail combinations at low angles of attack. For several configurations, changes are indicated which reduced the vertical-tail loads per unit yawing moment of each complete configuration at large angles of attack. Some results are presented on the effect of high angle of attack on the induced-flow field and tail loads due to a wing at supersonic speed.

SLENDER BODY↗

Arsenic attenuation in tailings at a former Cu-W-As mine, SW Finland

Nearly half a century after mine closure, release of As from the Ylöjärvi Cu–W–As mine tailings in groundwater and surface water run-off was observed. Investigations by scanning electron microscopy (SEM), electron microprobe analysis (EMPA), synchrotron-based micro-X-ray diffraction (μ-XRD), micro-X-ray absorption near edge structure (μ-XANES) and micro-extended X-ray absorption fine structure (μ-EXAFS) spectroscopy, and a sequential extraction procedure were performed to assess As attenuation mechanisms in the vadose zone of this tailings deposit. Results of SEM, EMPA, and sequential extractions indicated that the precipitation of As bearing Fe(III) (oxy)hydroxides (up to 18.4 wt.% As 2 O 5 ) and Fe(III) arsenates were important secondary controls on As mobility. The μ-XRD, μ-XANES and μ-EXAFS analyses suggested that these phases correspond to poorly crystalline and disordered As-bearing precipitates, including arsenical ferrihydrite, scorodite, kankite, and hydrous ferric arsenate (HFA). The pH within 200 cm of the tailings surface averaged 5.7, conditions which favor the precipitation of ferrihydrite. Poorly crystalline Fe(III) arsenates are potentially unstable over time, and their transformation to ferrihydrite, which contributes to As uptake, has potential to increase the As adsorption capacity of the tailings. Arsenic mobility in tailings pore water at the Ylöjärvi mine will depend on continued arsenopyrite oxidation, dissolution or transformation of secondary Fe(III) arsenates, and the As adsorption capacity of Fe(III) (oxy)hydroxides within this tailings deposit

Parviainen, Annika↗

Peptides derived from human galectin-3 N-terminal tail interact with its carbohydrate recognition domain in a phosphorylation-dependent manner

Highlights: •Galectin-3 is composed of a carbohydrate recognition domain and an N-terminal tail. •Synthetic peptides derived from the tail are shown to interact with the CRD. •This interaction is modulated by Ser- and Tyr-phosphorylation of the peptides. -- Abstract: Galectin-3 (Gal-3) is a multi-functional effector protein that functions in the cytoplasm and the nucleus, as well as extracellularly following non-classical secretion. Structurally, Gal-3 is unique among galectins with its carbohydrate recognition domain (CRD) attached to a rather long N-terminal tail composed mostly of collagen-like repeats (nine in the human protein) and terminating in a short non-collagenous terminal peptide sequence unique in this lectin family and not yet fully explored. Although several Ser and Tyr sites within the N-terminal tail can be phosphorylated, the physiological significance of this post-translational modification remains unclear. Here, we used a series of synthetic (phospho)peptides derived from the tail to assess phosphorylation-mediated interactions with {sup 15}N-labeled Gal-3 CRD. HSQC-derived chemical shift perturbations revealed selective interactions at the backface of the CRD that were attenuated by phosphorylation of Tyr 107 and Tyr 118, while phosphorylation of Ser 6 and Ser 12 was essential. Controls with sequence scrambling underscored inherent specificity. Our studies shed light on how phosphorylation of the N-terminal tail may impact on Gal-3 function and prompt further studies using phosphorylated full-length protein.

60 APPLIED LIFE SCIENCES↗

The tail sheath structure of bacteriophage T4: a molecular machine for infecting bacteria

The contractile tail of bacteriophage T4 is a molecular machine that facilitates very high viral infection efficiency. Its major component is a tail sheath, which contracts during infection to less than half of its initial length. The sheath consists of 138 copies of the tail sheath protein, gene product (gp) 18, which surrounds the central non-contractile tail tube. The contraction of the sheath drives the tail tube through the outer membrane, creating a channel for the viral genome delivery. A crystal structure of about three quarters of gp18 has been determined and was fitted into cryo-electron microscopy reconstructions of the tail sheath before and after contraction. It was shown that during contraction, gp18 subunits slide over each other with no apparent change in their structure.

36 MATERIALS SCIENCE↗

Crystal and cryoEM structural studies of a cell wall degrading enzyme in the bacteriophage [psi]29 tail

The small bacteriophage {phi}29 must penetrate the {approx}250-{angstrom} thick external peptidoglycan cell wall and cell membrane of the Gram-positive Bacillus subtilis, before ejecting its dsDNA genome through its tail into the bacterial cytoplasm. The tail of bacteriophage {phi}29 is noncontractile and {approx}380 {angstrom} long. A 1.8-{angstrom} resolution crystal structure of gene product 13 (gp13) shows that this tail protein has spatially well separated N- and C-terminal domains, whose structures resemble lysozyme-like enzymes and metallo-endopeptidases, respectively. CryoEM reconstructions of the WT bacteriophage and mutant bacteriophages missing some or most of gp13 shows that this enzyme is located at the distal end of the {phi}29 tail knob. This finding suggests that gp13 functions as a tail-associated, peptidoglycan-degrading enzyme able to cleave both the polysaccharide backbone and peptide cross-links of the peptidoglycan cell wall. Comparisons of the gp13{sup -} mutants with the {phi}29 mature and emptied phage structures suggest the sequence of events that occur during the penetration of the tail through the peptidoglycan layer.

59 BASIC BIOLOGICAL SCIENCES↗