Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Detecting impacts of surface development near weather stations since 1895 in the San Joaquin Valley of California

Abstract Temperature readings observed at surface weather stations have been used for detecting changes in climate due to their long period of observations. The most common temperature metrics recorded are the daily maximum (TMax) and minimum (TMin) extremes. Unfortunately, influences besides background climate variations impact these measurements such as changes in (1) instruments, (2) location, (3) time of observation, and (4) the surrounding artifacts of human civilization (buildings, farms, streets, etc.) Quantifying (4) is difficult because the surrounding infrastructure, unique to each site, often changes slowly and variably and is thus resistant to general algorithms for adjustment. We explore a direct method of detecting this impact by comparing a single station that experienced significant development from 1895 to 2019, and especially since 1970, relative to several other stations with lesser degrees of such development (after adjustments for the (1) to (3) are applied). The target station is Fresno, California (metro population ~ 15,000 in 1900 and ~ 1 million in 2019) situated on the eastern side of the broad, flat San Joaquin Valley in which several other stations reside. A unique component of this study is the use of pentad (5-day averages) as the test metric. Results indicate that Fresno experienced + 0.4 °C decade −1 more nighttime warming (TMin) since 1970 than its neighbors—a time when population grew almost 300%. There was little difference seen in TMax trends between Fresno and non-Fresno stations since 1895 with TMax trends being near zero. A case is made for the use of TMax as the preferred climate metric relative to TMin for a variety of physical reasons. Additionally, temperatures measured at systematic times of the day (i.e., hourly) show promise as climate indicators as compared with TMax and especially TMin (and thus TAvg) due to several complicating factors involved with daily high and low measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Long-term uncertainty quantification in WRF-modeled offshore wind resource off the US Atlantic coast

Uncertainty quantification of long-term modeled wind speed is essential to ensure stakeholders can best leverage wind resource numerical data sets. Offshore, this need is even stronger given the limited availability of observations of wind speed at heights relevant for wind energy purposes and the resulting heavier relative weight of numerical data sets for wind energy planning and operational projects. In this analysis, we consider the National Renewable Energy Laboratory's 21-year updated numerical offshore data set for the US East Coast and provide a methodological framework to leverage both floating lidar and near-surface buoy observations in the region to quantify uncertainty in the modeled hub-height wind resource. We first show how using a numerical ensemble to quantify the uncertainty in modeled wind speed is insufficient to fully capture the model deviation from real-world observations. Next, we train and validate a random forest to vertically extrapolate near-surface wind speed to hub height using the available short-term lidar data sets in the region. We then apply this model to vertically extrapolate the long-term near-surface buoy wind speed observations to hub height so that they can be directly compared to the long-term numerical data set. We find that the mean 21-year uncertainty in 140 m hourly average wind speed is slightly lower than 3 m s -1 (roughly 30m% of the mean observed wind speed) across the considered region. Atmospheric stability is strictly connected to the modeled wind speed uncertainty, with stable conditions associated with an uncertainty which is, on average, about 20 % larger than the overall mean uncertainty.

17 WIND ENERGY↗
DOE OSTI2022

Connection between coherent phonons and electron-phonon coupling in Sb (111)

We report time- and angle-resolved photoemission spectroscopy (trARPES) measurements on the Sb(111) surface. We observe band- and momentum-dependent binding-energy oscillations in the bulk and surface bands driven by $A_{1g}$ and $E_{g}$ coherent phonons. While the bulk band shows simultaneous $A_{1g}$ and $E_{g}$ oscillations, the surface bands show either $A_{1g}$ or $E_{g}$ oscillations. The observed behavior is reproduced by frozen-phonon calculations based on density-functional theory. Furthermore, this evidences the connection between electron-phonon coupling and coherent binding energy dynamics tied to lattice vibration and confirms that band-, momentum-, and mode-dependent electron-phonon coupling can indeed be probed by trARPES in the low fluence limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Probing the angular and polarization reconstruction of the ARIANNA detector at the South Pole

The sources of ultra-high energy (UHE) cosmic rays, which can have energies up to 10 20 eV, remain a mystery. UHE neutrinos may provide important clues to understanding the nature of cosmic-ray sources. ARIANNA aims to detect UHE neutrinos via radio (Askaryan) emission from particle showers when a neutrino interacts with ice, which is an efficient method for neutrinos with energies between 10 16 eV and 10 20 eV. The ARIANNA radio detectors are located in Antarctic ice just beneath the surface. Neutrino observation requires that radio pulses propagate to the antennas at the surface with minimum distortion by the ice and firn medium. Using the residual hole from the South Pole Ice Core Project, radio pulses were emitted from a transmitter located up to 1.7 km below the snow surface. By measuring these signals with an ARIANNA surface station, the angular and polarization reconstruction abilities are quantified, which are required to measure the direction of the neutrino. After deconvolving the raw signals for the detector response and attenuation from propagation through the ice, the signal pulses show no significant distortion and agree with a reference measurement of the emitter made in an anechoic chamber. Furthermore, the signal pulses reveal no significant birefringence for our tested geometry of mostly vertical ice propagation. The origin of the transmitted radio pulse was measured with an angular resolution of 0.37° indicating that the neutrino direction can be determined with good precision if the polarization of the radio-pulse can be well determined. In this work, we obtained a resolution of the polarization vector of 2.7°. Neither measurement show a significant offset relative to expectation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Simulation of radon-222 with the GEOS-Chem global model: Emissions, seasonality, and convective transport

Radon-222 (222Rn) is a short-lived radioactive gas naturally emitted from land surface, and has long been used to assess convective transport in atmospheric models. In this study, we simulate 222Rn using the GEOS-Chem chemical transport model with aims to improve our understanding of 222Rn emissions and surface concentration seasonality, and to characterize convective transport associated with two Goddard Earth Observing System (GEOS) meteorological products, MERRA and GEOS-FP. We evaluate four available 222Rn emission scenarios by comparing model results with surface observations at 51 global surface sites. The default emission scenario in GEOS-Chem yields a moderate agreement with global surface observations (< 70% data within a factor of 2) and a large underestimate of wintertime surface 222Rn concentrations at Northern Hemisphere mid- and high-latitudes due to an oversimplified formulation of 222Rn emission fluxes (1 atom cm-2 s-1 over land with a reduction by a factor of 3 under freezing conditions). We compose a new global 222Rn emission scenario based on Zhang et al. (2011) and show its potential to improve simulated surface 222Rn concentrations and seasonality. The regional components of this emission scenario include spatially and temporally varying emission fluxes derived from previous measurements of soil radium content and soil exhalation models, which are key factors to 222Rn emission flux rates. However, large model underestimates of surface 222Rn concentrations still exist in Asia, suggesting unusually high regional 222Rn emissions. We propose a conservative up-scaling factor of 1.2 for 222Rn emission fluxes in China, as also constrained by the observed deposition fluxes of 210Pb (decay daughter of 222Rn). With this modification, the model shows better agreement with the observations in Europe and North America (>80% data within a factor of 2), and reasonable agreement in Asia (close to 70%). Further constraints on 222Rn emissions would require additional observations of surface 222Rn concentrations and emission fluxes in central U.S., Canada, Africa, and Asia. We also compare and assess convective transport in model simulations driven by MERRA and GEOS-FP using observed 222Rn vertical profiles during northern mid-latitude summertime and from two short-term airborne campaigns. While the simulations with both GEOS products are able to capture the observed vertical gradient of 222Rn concentrations in the lower troposphere (0-4 km), neither correctly represents the level of convective detrainment, resulting in biases in the middle and upper troposphere. Compared to GEOS-FP, MERRA leads to stronger convective transport of 222Rn, which is partially compensated by its weaker large-scale vertical advection, resulting in similar global vertical distributions of 222Rn concentrations between the two simulations.

Zhang, Bo↗
DOE OSTI2021

Formation of Gas-Phase Allyl Radicals from Glycerol on Rutile TiO2(110)

The reaction pathways of glycerol on partially reduced TiO2(110) have been studied by a combination of molecular beam dosing and temperature-programmed desorption (TPD). Glycerol is found to bind more strongly to TiO2(110) than glycols due to an additional hydroxyl group in the molecule. When the Ti surface sites are saturated by glycerol, the majority of glycerol molecules (~ 95%) undergo further reactions to yield carbon-free (water and hydrogen) and carbon-containing products that are desorbed during the TPD ramp. In contrast to glycols for which both water and hydrogen arise exclusively from the cleavage of glycol O-H bonds, we identify two distinct reaction channels resulting from the cleavage of O-H and C-H bonds, respectively, for both water and hydrogen evolution from glycerol on TiO2(110). Quantitative determination of the desorption yields of water and hydrogen reveals that the C-H bond scission channel which occurs at higher temperature than the O-H bond scission channel, is a minor reaction channel for water formation, while it is a major reaction channel responsible for hydrogen evolution. For the carbon-containing products, we exclude both carbon deposition and carbon oxides (CO and CO2) formation, and identify the allyl radical as the major carbon-containing product. The formation of the allyl radical is accompanied by the formation of various minor carbon-containing products including propylene, acrolein, allyl alcohol, acetone, formaldehyde and ethylene. The different surface chemistries observed between glycerol and simpler alcohols and glycols on TiO2(110), suggest that smaller oxygenates cannot serve as models for larger oxygenates in probing their reaction pathways on oxide surfaces. The new reaction channels observed for glycerol on TiO2(110) may open up a new way to convert bio-renewable glycerol directly to pure hydrogen and hydrocarbons on TiO2. This work was supported by the US Department of Energy, Office of Sciences, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences, and performed in EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for the DOE by Battelle.

Chen, Long↗
DOE OSTI2022

Controlling melt flow by nanoparticles to eliminate surface wave induced surface fluctuation

The high surface roughness is one of the major challenges encountered in laser metal additive manufacturing (AM) processes, which is closely related to the melt flow behavior. However, how to control the melt flow in laser metal AM processes to improve surface finish is unknown. Here we reveal the effects of nanoparticles on melt flow behavior at every location of melt pool during laser metal AM process for the first time using Al6061 + TiC nanoparticles system and achieve significant improvement of surface finish by using TiC nanoparticles to control the melt flow and damp the surface wave. Based on the in-situ x-ray imaging observation, the surface wave is fully damped after adding TiC nanoparticles, compared with only 56% damping without nanoparticles during LPBF of Al6061. Our in-depth in-situ x-ray imaging analysis and viscosity measurement enable us to identify that nanoparticle-induced increase of viscosity causes the fully damping of the surface wave by (1) increasing the internal fluid friction for more efficient wave amplitude reduction, (2) controlling the melt flow to increase the surface wave number, (3) controlling the melt flow to increase the wave damping time. Furthermore, we also quantified the relative contributions of increasing fluid friction, increasing wave number, and increasing damping time to wave damping, which account for 61%, 25%, and 14%, respectively. Furthermore, our research provides the mechanisms and potential method to address the surface finish challenge in laser metal AM processes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Operando APXPS for direct probing of Li ion battery LCO electrode/electrolyte interface chemistry during lithiation/delithiation

The real-time interface chemistry between the lithium cobalt oxide (LCO) working electrode and the LiClO 4 /propylene carbonate (PC) electrolyte is investigated during lithiation/delithiation using dip-and-pull ambient pressure photoelectron spectroscopy (APXPS). The APXPS results appear to exhibit the seldom discussed Co 2+ state in the LCO structure, where the operando measurements indicate electron transfer among Co 2+ , Co 3+ , and Co 4+ states. Specifically, the lithiation of LCO reduces the Co 4+ state to both Co 3+ and Co 2+ states, where, as a function of voltage, reduction to the Co 2+ state is initially more pronounced followed by Co 3+ formation. In addition, a delay in surface delithiation is observed during the reverse potential steps. This is discussed in terms of overpotential at the interface measurement position as a consequence of the dip-and-pull setup for this experiment. Finally, the shifts in the apparent binding energies of the spectral features corresponding to the electrolyte and LCO at their interface show that the electrochemical potentials at delithiation voltage steps are different from the lithiation steps at the same applied voltages. This further explains the non-responsive delithiation. The BE shift observed from the LCO surface is argued to be dominantly due to the semi-conductive nature of the sample. Overall, this article shows the importance of operando APXPS for probing non-equilibrium states in battery electrodes for understanding electron transfer in the reactions.

Liu, Qianhui [Uppsala Univ. (Sweden)] (ORCID:00000↗
DOE OSTI2024

Measurement of atomic oxygen densities using TALIF on a dielectric barrier discharge: insights into the volume above a micro cavity plasma array

Dielectric barrier discharges, particularly micro cavity plasma arrays, offer significant potential for plasma-catalytic research due to their ability to ignite plasma in direct contact with a catalytic surface, enabling the observation of plasma-surface interactions. A key factor in their application is the generation of reactive species, such as atomic oxygen, within the cavities. These species can interact with both the surface (e.g. for activation or cleaning) and the gas being treated (e.g. for oxidation). Given the central role of oxygen atoms in plasma catalysis and their use as a model for more complex species, this work investigates the transport of these atoms out of the cavities. Two-photon absorption laser-induced fluorescence spectroscopy with picosecond laser excitation is performed in the volume above the cavities. The results are compared with a basic diffusion model. The reactor operates with a He/O 2 mixture at a flow rate of 1 slm and atmospheric pressure. Densities of up to 10 16 cm -3 are measured near the surface. Time-dependent measurements show that, at a distance of 350 µm from the surface, a density equilibrium is reached within less than 3 ms of reactor operation. Decay times due to ozone formation after the reactor is turned off are on a similar scale. Spatially resolved measurements show that the oxygen density decreases exponentially from the surface but remains detectable up to approximately 1 mm above the surface, indicating significant application potential. Variations in the O 2 admixture show a density maximum at 0.4%, confirming previous helium state enhanced actinometry measurements within the cavities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Legacy surface change analyses of the 1993 Rock Valley earthquake sequence for direct comparison to planned NA-22 underground conventional high-explosive experiments (Source Physics Experiment 3 (SPE3) - RV/DC Task 1.3 FY22 Final Report)

Recent work under two previous phases of the NNSA NA-22 Source Physics Experiment (SPE) have shown that underground chemical high-explosive experiments can produce detectable surface changes that differ in spatial extent and vertical magnitude depending on the geologic media at the site (Schultz-Fellenz et al., 2018; 2020; Crawford et al., 2021). Neither of these two prior phases of SPE identified natural earthquake-related surface effects in the same region that occurred at a similar depth as the explosive experiments for direct comparison. While earthquakes can also produce surface changes that are detectable using remote sensing data analyses, it is expected that the pattern and spatial extent of surface changes would vary between earthquakes and explosions. However, no direct-observed surface-change signature comparison between earthquakes and explosions has ever been performed. The SPE Phase 3 Rock Valley/Direct Comparison (RV/DC) program presents a unique opportunity to investigate and characterize co-occurrence of both earthquakes and explosions. In this project, we worked to address five tasks in a workflow, as follows: 1. Identify and obtain existing high-resolution legacy satellite and aerial imagery as close in time before and after the 1993 Rock Valley earthquake sequence to temporally constrain the analyses. 2. Transform these pre-earthquake and post-earthquake datasets into digital elevation models (DEMs) using geospatial analysis software packages (e.g., ArcGIS, Agisoft Metashape, and Google Earth Engine). 3. Perform DEM differencing analyses to assess and quantify earthquake-related changes from the 1993 sequence, and develop map products that visualize these analyses. 4. Use the analyses from (3) to: (a) assess spatial distribution and magnitude of surface changes due to the 1993 Rock Valley earthquake sequence, and (b) determine parameters of forthcoming, planned explosion-related surface change data collection from sensors mounted on unmanned aerial vehicles (UAVs) (e.g., spatial extent of collection, design and density of survey control, sensors to deploy, forward speed and line spacing of UAV flight lines, flight altitude). 5. Develop a summary report on the analyses, including how the analyses define parameters and identify focus areas for any future surface change analytical field campaigns related to the explosive experiment. Analyzing these legacy data and identifying whether they can detect any surface changes related to the earthquake sequence facilitates opportunities for direct signature comparison of surface change from explosions at one location, which has never previously been performed. Comparing the surface change signatures from a co-located and depth-equivalent earthquake and an explosion could help to advance remote sensing event discrimination techniques. This report summarizes the work completed toward this ambitious goal.

42 ENGINEERING↗
DOE OSTI2020

High Heat Flux Testing of Castellated Graphite Plasma- Facing Components

As part of the recovery project of the National Spherical Tokamak Experiment–Upgrade (NSTX-U), the divertor plasma-facing components (PFCs) were redesigned to handle significantly higher heat fluxes and longer pulse lengths than NSTX. The design process resulted in a castellated, graphite PFC tile. To verify the thermal performance of this design, dedicated electron beam, high heat flux (HHF) testing was carried out on a de-optimized mock-up PFC target. These tests demonstrated that the tile design is itself robust to large, localized thermal gradients. No mechanical damage to the mock-up was observed during HHF testing, though the actual PFC tile mechanical tie-down was not tested. Rather, when the surface temperature exceeded the sublimation temperature of graphite, carbon blooms from the mock-up tile surface were observed. Finally, this resulted in 1 to 2 mm of surface material ablating from the mock-up after repeated, highly localized electron beam exposures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Rationalizing energy level alignment by characterizing Lewis acid/base and ionic interactions at printable semiconductor/ionic liquid interfaces

Charge transfer and energy conversion processes at semiconductor/electrolyte interfaces are controlled by local electric field distributions, which can be especially challenging to measure. Furthermore, we leverage the low vapor pressure and vacuum compatibility of ionic liquid electrolytes to undertake a layer-by-layer, ultra-high vacuum deposition of a prototypical ionic liquid EMIM + (1-ethyl-3-methylimidazolium) and TFSI – (bis(trifluoromethylsulfonyl)-imide) on the surfaces of different electronic materials. We consider a case-by-case study between a standard metal (Au) and four printed electronic materials, where interfaces are characterized by a combination of X-ray and ultraviolet photoemission spectroscopies (XPS/UPS). For template-stripped gold surfaces, we observe through XPS a preferential orientation of the TFSI anion at the gold surface, enabling large electric fields (~10 8 eV m –1 ) within the first two monolayers detected by a large surface vacuum level shift (0.7 eV) in UPS.

14 SOLAR ENERGY↗
DOE OSTI2024

Influence of Spatter on Porosity, Microstructure, and Corrosion of Additively Manufactured Stainless Steel Printed Using Different Island Size

Specimens of 316 L stainless steel were printed using laser powder bed fusion (LPBF), a popular metal additive manufacturing (AM) technique, with varying island sizes. Not many researchers have considered the impact of spatter while optimizing LPBF printing parameters. In this research, the influence of spatter was considered while also investigating the effect of varied island size on the microstructure, surface roughness, microhardness, and corrosion resistance of LPBF-316 L. No correlation was observed between surface roughness or microhardness and minor variations in island size. However, a correlation was drawn between varied island sizes and porosity in LPBF-316 L. The specimens associated with larger island sizes showed significantly enhanced corrosion resistance due to fewer manufacturing defects and reduced porosity, attributed to the minimal influence of the spatter. Based on analysis, the LPBF parameters were revised, which lead to superior corrosion resistance of LPBF-316 L, attributed to high density and reduced porosity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

What drives daily precipitation over the central Amazon? Differences observed between wet and dry seasons

This study offers an alternative presentation regarding how diurnal precipitation is modulated by convective events that developed over the central Amazon during the preceding nighttime period. We use data collected during the Observations and Modelling of the Green Ocean Amazon (GoAmazon 2014/2015) field campaign that took place from 1 January 2014 to 30 November 2015 in the central Amazon. Local surface-based observations of cloud occurrence, soil temperature, surface fluxes, and planetary boundary layer characteristics are coupled with satellite data to identify the physical mechanisms that control the diurnal rainfall in central Amazon during the wet and dry seasons. This is accomplished through evaluation of the atmospheric properties during the nocturnal periods preceding raining and non-raining events. Comparisons between these non-raining and raining transitions are presented for the wet (January to April) and dry (June to September) seasons. The results suggest that wet-season diurnal precipitation is modulated by nighttime cloud coverage and local influences such as heating induced turbulence, whereas the dry-season rain events are controlled by large-scale circulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Assessing the cloud radiative bias at Macquarie Island in the ACCESS-AM2 model

Abstract. As a long-standing problem in climate models, large positive shortwave radiation biases exist at the surface over the Southern Ocean, impacting the accurate simulation of sea surface temperature, atmospheric circulation, and precipitation. Underestimations of low-level cloud fraction and liquid water content are suggested to predominantly contribute to these radiation biases. Most model evaluations for radiation focus on summer and rely on satellite products, which have their own limitations. In this work, we use surface-based observations at Macquarie Island to provide the first long-term, seasonal evaluation of both downwelling surface shortwave and longwave radiation in the Australian Community Climate and Earth System Simulator Atmosphere-only Model version 2 (ACCESS-AM2) over the Southern Ocean. The capacity of the Clouds and the Earth’s Radiant Energy System (CERES) product to simulate radiation is also investigated. We utilize the novel lidar simulator, the Automatic Lidar and Ceilometer Framework (ALCF), and all-sky cloud camera observations of cloud fraction to investigate how radiation biases are influenced by cloud properties. Overall, we find an overestimation of +9.5±33.5 W m−2 for downwelling surface shortwave radiation fluxes and an underestimation of -2.3±13.5 W m−2 for downwelling surface longwave radiation in ACCESS-AM2 in all-sky conditions, with more pronounced shortwave biases of +25.0±48.0 W m−2 occurring in summer. CERES presents an overestimation of +8.0±18.0 W m−2 for the shortwave and an underestimation of -12.1±12.2 W m−2 for the longwave in all-sky conditions. For the cloud radiative effect (CRE) biases, there is an overestimation of +4.8±28.0 W m−2 in ACCESS-AM2 and an underestimation of -7.9±20.9 W m−2 in CERES. An overestimation of downwelling surface shortwave radiation is associated with an underestimated cloud fraction and low-level cloud occurrence. We suggest that modeled cloud phase is also having an impact on the radiation biases. Our results show that the ACCESS-AM2 model and CERES product require further development to reduce these radiation biases not just in shortwave and in all-sky conditions, but also in longwave and in clear-sky conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A self-adjusting platinum surface for acetone hydrogenation

We show that platinum displays a self-adjusting surface that is active for the hydrogenation of acetone over a wide range of reaction conditions. Reaction kinetics measurements under steady-state and transient conditions at temperatures near 350 K, electronic structure calculations employing density-functional theory, and microkinetic modeling were employed to study this behavior over supported platinum catalysts. The importance of surface coverage effects was highlighted by evaluating the transient response of isopropanol formation following either removal of the reactant ketone from the feed, or its substitution with a similarly structured species. The extent to which adsorbed intermediates that lead to the formation of isopropanol were removed from the catalytic surface was observed to be higher following ketone substitution in comparison to its removal, indicating that surface species leading to isopropanol become more strongly adsorbed on the surface as the coverage decreases during the desorption experiment. This phenomenon occurs as a result of adsorbate–adsorbate repulsive interactions on the catalyst surface which adjust with respect to the reaction conditions. Reaction kinetics parameters obtained experimentally were in agreement with those predicted by microkinetic modeling when the binding energies, activation energies, and entropies of adsorbed species and transition states were expressed as a function of surface coverage of the most abundant surface intermediate (MASI, C 3 H 6 OH*). It is important that these effects of surface coverage be incorporated dynamically in the microkinetic model (e.g., using the Bragg–Williams approximation) to describe the experimental data over a wide range of acetone partial pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Determining flow directions in river channel networks using planform morphology and topology

Abstract. The abundance of global, remotely sensed surface water observations has accelerated efforts toward characterizing and modeling how water moves across the Earth's surface through complex channel networks. In particular, deltas and braided river channel networks may contain thousands of links that route water, sediment, and nutrients across landscapes. In order to model flows through channel networks and characterize network structure, the direction of flow for each link within the network must be known. In this work, we propose a rapid, automatic, and objective method to identify flow directions for all links of a channel network using only remotely sensed imagery and knowledge of the network's inlet and outlet locations. We designed a suite of direction-predicting algorithms (DPAs), each of which exploits a particular morphologic characteristic of the channel network to provide a prediction of a link's flow direction. DPAs were chained together to create “recipes”, or algorithms that set all the flow directions of a channel network. Separate recipes were built for deltas and braided rivers and applied to seven delta and two braided river channel networks. Across all nine channel networks, the recipe-predicted flow directions agreed with expert judgement for 97 % of all tested links, and most disagreements were attributed to unusual channel network topologies that can easily be accounted for by pre-seeding critical links with known flow directions. Our results highlight the (non)universality of process–form relationships across deltas and braided rivers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

New Insights into the Bulk and Surface Defect Structures of Ceria Nanocrystals from Neutron Scattering Study

Neutron diffraction and pair distribution function studies coupled with Raman spectroscopy have successfully unraveled the detailed oxygen defect structures of ceria nanocubes and nanorods. Two types of defect sites are revealed for the ceria nanocrystals: surface and bulk defects. It is proposed that the surface oxygen defects in both types of CeO 2 nanocrystals are predominantly the partially reduced Ce 3 O 5+x , with the bulk defect structures dominated by interstitial Frenkel-type oxygen vacancies. Ceria nanorods possess much higher concentration of surface oxygen defects relative to the nanocubes, albeit with only slightly higher concentration of bulk Frenkel-type oxygen vacancies. Upon annealing the nanorod sample at 600 °C under vacuum (~10 –4 to 10 –5 mbar), a partially reduced ceria phase with long-range oxygen vacancy ordering (Ce 3 O 5+x ) has been observed experimentally for the first time. This intriguing observation that surface defect phases can take on ordered defect sublattices under certain conditions is of great value in understanding the temperature-dependent catalytic performance of ceria nanocrystals. Furthermore, a drastic decrease of the surface vacancies in the ceria nanocrystals is observed upon exposure to SO 2 , especially for the nanorods, a likely origin for the sulfur poisoning effect on ceria-based materials. This study suggests that tailoring surface morphology is a promising strategy to control defect properties of ceria nanomaterials. It also provides fundamental insights to stabilize surface oxygen defects in CeO 2 nanocrystals to achieve high redox performance under corrosive environments such as under SO 2 /SO x exposure.

36 MATERIALS SCIENCE↗