SEARCH · Engineering Papers

Results for “Stokes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Turbine Vane External Heat Transfer. Volume 2. Numerical Solutions of the Navier-stokes Equations for Two- and Three-dimensional Turbine Cascades with Heat Transfer

The application of the time-dependent ensemble-averaged Navier-Stokes equations to transonic turbine cascade flow fields was examined. In particular, efforts focused on an assessment of the procedure in conjunction with a suitable turbulence model to calculate steady turbine flow fields using an O-type coordinate system. Three cascade configurations were considered. Comparisons were made between the predicted and measured surface pressures and heat transfer distributions wherever available. In general, the pressure predictions were in good agreement with the data. Heat transfer calculations also showed good agreement when an empirical transition model was used. However, further work in the development of laminar-turbulent transitional models is indicated. The calculations showed most of the known features associated with turbine cascade flow fields. These results indicate the ability of the Navier-Stokes analysis to predict, in reasonable amounts of computation time, the surface pressure distribution, heat transfer rates, and viscous flow development for turbine cascades operating at realistic conditions.

Yang, R. J.↗

NASA NTRS1986

A verification of unsteady Navier-Stokes solutions around oscillating airfoils

A finite difference solution code for the two dimensional Navier-Stokes equations was combined with a moving-grid system. The thin layer Navier-Stokes equations with a turbulence model are solved in a time-accurate manner in order to study the unsteady aerodynamics around airfoils undergoing small amplitude pitching or heaving motions in the transonic regime. The accuracy of the solutions obtained by the use of the present moving-grid technqiue is investigated. The effects of the minimum grid size and the integrating time-step size on the solutions are also checked. Some of the solutions obtained by the present method are compared with experimental results. It is demonstrated that the unsteady aerodynamics around oscillating airfoils can be predicted fairly well by the present code for cases in which the dynamic angle of attack or displacement is small.

Nakamichi, J.↗

NASA NTRS1986

Generalized INF-SUP condition for Chebyshev approximation of the Navier-Stokes equations

An abstract mixed problem and its approximation are studied; both are well-posed if and only if several inf-sup conditions are satisfied. These results are applied to a spectral Galerkin method for the Stokes problem in a square, when it is formulated in Chebyshev weighted Sobolev spaces. Finally, a collocation method for the Navier-Stokes equations at Chebyshev nodes is analyzed.

Bernardi, Christine↗

NASA NTRS1986

Transonic Navier-Stokes wing solution using a zonal approach. Part 1: Solution methodology and code validation

A fast diagonalized Beam-Warming algorithm is coupled with a zonal approach to solve the three dimensional Euler/Navier-Stokes equations. The computer code, called Transonic Navier-Stokes (TNS), uses a total of four zones for wing configurations (or can be extended to complete aircraft configurations by adding zones). In the inner blocks near the wing surface, the thin-layer Navier-Stokes equations are solved, while in the outer two blocks the Euler equations are solved. The diagonal algorithm yields a speedup of as much as a factor of 40 over the original algorithm/zonal method code. The TNS code, in addition, has the capability to model wind tunnel walls. Transonic viscous solutions are obtained on a 150,000-point mesh for a NACA 0012 wing. A three-order-of-magnitude drop in the L2-norm of the residual requires approximately 500 iterations, which takes about 45 min of CPU time on a Cray-XMP processor. Simulations are also conducted for a different geometrical wing called WING C. All cases show good agreement with experimental data.

Flores, J.↗

NASA NTRS1986

Transonic Navier-Stokes wing solutions using a zonal approach. Part 2: High angle-of-attack simulation

A computer code is under development whereby the thin-layer Reynolds-averaged Navier-Stokes equations are to be applied to realistic fighter aircraft configurations. This transonic Navier-Stokes code (TNS) utilizes a zonal approach in order to treat complex geometries and satisfy in-core computer memory constraints. The zonal approach was applied to isolated wing geometries in order to facilitate code development. The TNS finite difference algorithm, zonal methodology, and code validation with experimental data is addressed. Also addressed are some numerical issues such as code robustness, efficiency, and accuracy at high angles of attack. Special free-stream-preserving metrics proved an effective way to treat H-mesh singularities over a large range of severe flow conditions, including strong leading edge flow gradients, massive shock induced separation, and stall. Furthermore, lift and drag coefficients were computed for a wing up through CLmax. Numerical oil flow patterns and particle trajectories are presented both for subcritical and transonic flow. These flow simulations are rich with complex separated flow physics and demonstrate the efficiency and robustness of the zonal approach.

Chaderjian, Neal M.↗

NASA NTRS1987

Algorithm implementation on the Navier-Stokes computer

The Navier-Stokes Computer is a multi-purpose parallel-processing supercomputer which is currently under development at Princeton University. It consists of multiple local memory parallel processors, called Nodes, which are interconnected in a hypercube network. Details of the procedures involved in implementing an algorithm on the Navier-Stokes computer are presented. The particular finite difference algorithm considered in this analysis was developed for simulation of laminar-turbulent transition in wall bounded shear flows. Projected timing results for implementing this algorithm indicate that operation rates in excess of 42 GFLOPS are feasible on a 128 Node machine.

Krist, Steven E.↗

NASA NTRS1987

Evaluation of Navier-Stokes and Euler solutions for leading-edge separation vortices

Extensive study on the numerical simulation of the vortical flow over a double delta wing is carried out using the thin layer Navier-Stokes and Euler equations. Two important flow characteristics, vortex interaction and vortex breakdown, are successfully simulated. Grid resolution is one of the most important factors associated with the vortex problem. Computations were performed on a series of grids with various levels of refinement, coarse, medium, and fine. Computations using either the coarse or medium grids fail to capture the proper physical phenomena. The computed result using a fine grid shows flow unsteadiness once the vortex breakdown takes place. The C sub L - alpha characteristics are well predicted up to the breakdown angle of attack for all the grid distributions. The Euler solutions show fairly good agreement with the experiment on the C sub L - alpha characteristics. However, other aspects of the solution at each angle of attack, such as the locus of the leading edge separation vortex, are not consistent with the experiment. Even for the fine grid Navier-Stokes computations, further grid resolution is required to obtain good quantitative agreement with the experiment.

Fujii, K.↗

NASA NTRS1987

Navier Stokes solution of the flowfield over ice accretion shapes

The numerical simulation of flow about ice accretion shapes has been accomplished by solving the Navier-Stokes equations using MacCormack's explicit finite difference scheme. The computations were performed on a CRAY-XMP computer. The influence of turbulence is taken into account by means of an algebraic eddy-viscosity model. In order to optimize the grid spacing and to achieve near orthogonality at the surface of the complex ice shapes, a hyperbolic grid generation scheme is utilized. Particular attention is given to the heat transfer process for which good agreement between the numerical and experimental results is achieved. In addition, liquid water droplet trajectories are coupled within the flowfield along with the resulting collection efficiencies using a parabolized Navier-Stokes formulation.

Scott, J. N.↗

NASA NTRS1987

Application of an upwind Navier-Stokes code to two-dimensional transonic airfoil flow

An upwind-biased implicit approximate factorization Navier-Stokes algorithm is applied to a variety of steady transonic airfoil cases, using the NACA 0012, RAE 2822, and Jones supercritical airfoils. The thin-layer form of the compressible Navier-Stokes equations is used. Both the CYBER 205 and CRAY 2 supercomputers are utilized, with average computational speeds of about 18 and 16 microsec/gridpoint/iteration, respectively. Lift curves, drag polars, and variations in drag coefficient with Mach number are determined for the NACA 0012 and Jones supercritical airfoils. Also, several cases are computed for comparison with experiment. The effect of grid density and grid extent on a typical turbulent airfoil solution is shown. An algebraic eddy-viscosity turbulence model is used for all of the computations.

Rumsey, Christopher L.↗

NASA NTRS1987

Further comparisons of interactive boundary-layer and thin-layer Navier-Stokes procedures

Calculations of the flows over NACA 4412 and GA(W)-2 airfoils with low-speed flow and over NACA 0012 and RAE 2822 airfoils with transonic flow are reported. They were obtained by solving potential flow and boundary-layer equations, and by solving thin-layer Navier-Stokes equations. The results cover a range of angles of attack up to and including stall and allow the evaluation of the numerical and physical features of the two solution methods. The agreement with measurements is acceptable except between the results of the thin Navier-Stokes equations and measurements in subsonic flow at high angles of attack. The interactive boundary-layer method is considerably more efficient requiring considerably less computer time and storage.

Chang, K. C.↗

NASA NTRS1986

The calculation of supersonic viscous flows using the parabolized Navier-Stokes equations

Solution of the parabolic Navier-Stokes (PNS) equations for supersonic flows is discussed, and compatibility of the PNS method with the triple-deck theory of Stewartson (1974) is demonstrated. Characteristic and stability analyses show that use of an appropriate filter on the pressure term in the x-momentum equation can suppress the departure solutions, giving the usual desired weak interaction solution. An Alternating Direction Explicit procedure, with minimal computer storage requirements compared to the full Navier-Stokes solvers, is proposed to calculate strongly interacting flows using a global iteration procedure for the PNS equations. The PNS equations are used to solve the hypersonic viscous interaction problem, and good agreement is found with experimental results.

Davis, R. T.↗

NASA NTRS1987

Solution of the two-dimensional Navier-Stokes equations using sparse matrix solvers

The use of direct sparse matrix solvers in the solution of the Navier-Stokes equations is investigated. The Yale Sparse Matrix Package and its implementation in the solution algorithm is described. The streamfunction-vorticity form of the Navier-Stokes equations are discretized and linearized and the resulting system of equations are solved using this package. Several viscous flow problems are investigated, including flow in a cavity and flow around a NACA0012 airfoil. Massively separated flow around a sine wave airfoil is investigated and high Reynolds number solutions are obtained. A solution of the unsteady flow around a Joukowski airfoil at high angle of attack is presented.

Bender, Erich E.↗

NASA NTRS1987

Steady flow past sudden expansions at large Reynolds number. II - Navier-Stokes solutions for the cascade expansion

The equations of motion in the steady laminar flow past a sudden expansion at large Reynolds number, R, reduce to the boundary layer equations as R tends to the freestream valve, when the longitudinal length scale of the separated eddy increases linearly and indefinitely with R. A global Newton method is presently used to obtain finite difference solutions to the steady Navier-Stokes equations up to R of 1000 for a uniform inflow past a cascade of sudden expansions. For large expansion ratio values, the eddy length increases linearly with R; for smaller values, however, where boundary layer equation solutions could not be found, the steady solutions to the Navier-Stokes equations approach the limit of an inviscid eddy in length with increasing R.

Milos, Frank S.↗

NASA NTRS1987

A comparison of numerical flux formulas for the Euler and Navier-Stokes equations

Numerical flux formulas for the convection terms in the Euler or Navier-Stokes equations are analyzed with regard to their accuracy in representing steady nonlinear and linear waves (shocks and entropy/shear waves, respectively). Numerical results are obtained for a one-dimensional conical Navier-Stokes flow including both a shock and a boundary layer. Analysis and experiments indicate that for an accurate representation of both layers the flux formula must include information about all different waves by which neighboring cells interact, as in Roe's flux-difference splitting. In comparison, Van Leer's flux-vector splitting, which ignores the linear waves, badly diffuses the boundary layer. The results of MacCormack's scheme, if properly tuned, are significantly better. The use of a sufficiently detailed flux formula appears to reduce the number of cells required to resolve a boundary layer by a factor 1/2 to 1/4 and thus pays off.

Van Leer, Bram↗

NASA NTRS1987

Simulations of transition and turbulence on the Navier-Stokes computer

The Navier-Stokes Computer (NSC) consists of multiple local memory parallel processors interconnected in a hypercube network. Efficient implementation of algorithms on the NSC thus requires the effective utilization of both the coarse and fine grain paralelism inherent in the architectural design. The basic approach to implementing an algorithm on the NSC is presented herein. The particular finite-difference algorithm considered was developed for performing transition and turbulence simulations by direct solution of the time-dependent incompressible Navier-Stokes equations. The suitability of this algorithm for performing simulations of the isotropic turbulence problem is verified from computations performed on a Cray 2. Projected timing results for the algorithm on the NSC itself are presented for both the isotropic turbulence and laminar turbulent transition problems.

Krist, S. E.↗

NASA NTRS1987

A new algorithm for the Navier-Stokes equations applied to transonic flows over wings

A new algorithm has been developed for the Navier-Stokes equations. For the convective terms, this algorithm employs flux vector splitting together with a locally rotated coordinate system that is aligned with the streamwise direction. The algorithm has been implemented into a Navier-Stokes code, the NASA Ames Research Center's TNS code, and several cases of steady flow have been calculated. The results show improvements over the original method in the code. First, in a case of separated flow, there is better agreement with the experimental results and also there is an absence of numerical oscillations that occur with the original method. Second, in a case with a strong supersonic to subsonic shock wave, comparisons show an improvement in the resolution of the shock wave and the reexpansion singularity.

Goorjian, Peter M.↗

NASA NTRS1987

Navier-Stokes analysis of two- and three-dimensional flow field in solid rocket motors with segment joints

A multidimensional implicit Navier-Stokes analysis which uses numerical solution of ensemble-averaged Navier-Stokes equations in a nonorthogonal bodyfitted cylindrical-polar coordinate system has been applied to simulation of the internal flow field in solid-propellant rocket motor chambers with segment joints. The calculation procedure incorporates a two-equation (k-epsilon) turbulence model and utilizes a consistently split, linearized block-implicit algorithm for numerical solution of the governing equations. Computations performed to simulate the axisymmetric flow field in the vicinity of the aft field joint in the Space Shuttle SRB using 14,725 grid points show the presence of a region of reversed axial flow near the downstream edge of the slot. Calculations were also performed for two cases involving asymmetric three-dimensional flow in the vicinity of the aft field joint in the SRB using 721,525 grid points to estimate circumferential velocities and pressure gradients at the joint.

Sabnis, J. S.↗

NASA NTRS1987

Navier-Stokes cascade analysis with a stiff Kappa-Epsilon turbulence solver

The two dimensional, compressible, thin layer Navier-Stokes equations with the Baldwin-Lomax turbulence model and the kinetic energy-energy dissipation (k-epsilon) model are solved numerically to simulate the flow through a cascade. The governing equations are solved for the entire flow domain, without the boundary layer assumptions. The stiffness of the k-epsilon equations is discussed. A semi-implicit, Runge-Kutta, time-marching scheme is developed to solve the k-epsilon equations. The impact of the k-epsilon solver on the explicit Runge-Kutta Navier-Stokes solver is discussed. Numerical solutions are presented for two dimensional turbulent flow over a flat plate and a double circular arc cascade and compared with experimental data.

Liu, Jong-Shang↗