Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stochastic modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Influence of surface roughness and waviness on film thickness and pressure distribution in elastohydrodynamic contacts

The Christensen theory of a stochastic model for hydrodynamic lubrication of rough surfaces was extended to elastohydrodynamic lubrication between two rollers. Solutions for the reduced pressure at the entrance as a function of the ratio of the average nominal film thickness to the rms surface roughness, were obtained numerically. Results were obtained for purely transverse as well as purely longitudinal surface roughness for cases with or without slip. The reduced pressure was shown to decrease slightly by considering longitudinal surface roughness. The same approach was used to study the effect of surface roughness on lubrication between rigid rollers and lubrication of an infinitely wide slider bearing. Using the flow balance concept, the perturbed Reynolds equation, was derived and solved for the perturbed pressure distribution. In addition, Cheng's numerical scheme was modified to incorporate a single two-dimensional elastic asperity on the stationary surface. The perturbed pressures obtained by these three different models were compared.

Chow, L. S. H.↗
NASA NTRS1975

Stochastic simulation of vertically nonhomogeneous gusts

The small-scale horizontal gust structure of detailed wind profiles along the vertical in the first 20 km of the atmosphere is a vertically nonhomogeneous process. A linear stochastic model was developed based on the process covariance function. This model was formulated through the use of a scaling hypothesis which transforms the nonhomogeneous gust process into a nondimensional gust process which is homogeneous in a nondimensional gust height coordinate. The velocity scaling parameter for the gust process is the gust standard deviation, and the length scale used to nondimensionalize the altitude is the vertical space lag associated with the first zero of the gust covariance function. State space theory was used to derive a digital filter from the model, which can be readily used to simulate gusts for space vehicle design applications.

Fichtl, G. H.↗
NASA NTRS1976

The effect of surface roughness on the average film thickness between lubricated rollers

The Christensen theory of stochastic models for hydrodynamic lubrication of rough surfaces is extended to elastohydrodynamic lubrication between two rollers. The Grubin-type equation including asperity effects in the inlet region is derived. Solutions for the reduced pressure at the entrance as a function of the ratio of the average nominal film thickness to the rms surface roughness (in terms of standard deviation), have been obtained numerically. Results were obtained for purely transverse and purely longitudinal surface roughness for cases with or without slip. The reduced pressure is shown to decrease slightly by considering longitudinal surface roughness. Transverse surface roughness has a slight beneficial effect on the average film thickness at the inlet. The same approach was used to study the effect of surface roughness on lubrication between rigid rollers and lubrication of an infinitely-wide slider bearing. The effects of surface roughness are shown to be similar to those found in elastohydrodynamic contacts.

Chow, L. S. H.↗
NASA NTRS1976

Stochastic simulation of vertically nonhomogeneous gusts

The small-scale horizontal gust structure of detailed wind profiles along the vertical in the first 20 km of the atmosphere is a vertically nonhomogeneous process. A linear stochastic model is developed for the process based on the process covariance function. This model is formulated through the use of a scaling hypothesis that transforms the nonhomogeneous gust process into a nondimensional gust process which is homogeneous in a nondimensional height coordinate. The velocity scaling parameter for the gust process is the gust standard deviation, and the length scale used to nondimensionalize the altitude is the vertical space lag associated with the first zero of the gust covariance function. State space theory is used to derive a digital filter from the model, which can be readily used to simulate gusts for space vehicle design applications.

Fichtl, G. H.↗
NASA NTRS1979

Optimization and simulation of flight control laws under parameter uncertainty and external disturbances

Several tasks pertinent to flight control in parameter uncertainty and wind-gust loading were successfully completed. Identification algorithms for extracting stability and control derivatives from flight data taking gust loading into account were developed. They were verified by simulation and evaluated throughly on actual flight data taken on a Lockheed Jet Star flying in turbulence. In particular the need for automatically generated dither-like inputs was studied. Criteria for performance evaluation using stochastic models were developed for gust alleviation as well as handling quantities. Algorithms for assessing degradation in performance due to parameter uncertainty were developed and evaluated using flight test data.

Source record↗
NASA NTRS1980

Propagation in a shearing plasma. II - Turbulence and the frequency range of pulsar microstructure

Numerical calculations are presented which explore the propagation of radio waves and pulses through a turbulent shearing plasma. A stochastic model is used to describe the turbulent velocity field, in which random fluctuations are superposed on a mean profile. Both Gaussian wave packets and shot-noise pulses polarized in the plane of shearing acquire quasi-periodic intensity modulations above the rest-frame plasma frequency. The frequency range over which these modulations appear is shown to depend on the spatial correlation length of the turbulent fluctuations and on their standard deviation from the mean velocity. The period of the modulations is variable from one realization of the random process to the next, and the average period is frequency dependent. The results of these calculations lend further support to a model for pulsar microstructure in which periodic micropulses are pure temporal modulations of the emitted radiation due to propagation effects in magnetospheric shearing regions. It is shown that turbulence on a scale of approximately 10 cm can produce these quasi-periodic modulations over a frequency range comparable to that of observed microstructure.

Harding, A. K.↗
NASA NTRS1980

Viking Orbiter 75 in-flight pointing calibration of the high-gain antenna

An in-flight pointing calibration technique developed for the Viking Orbiter high-gain antenna has been validated through actual flight usage. The desired telecommunications performance dictated that the high-gain antenna pointing error be held at 0.7 deg, which would have been exceeded without calibration. The in-flight calibration methodology required the development of a stochastic model of the spacecraft rotational biases and earth-received signal strength measurements. The signal strength measurements, which were performed at X-band frequency, were used as observations to estimate the rotational biases and their corresponding uncertainties. Reducing the uncertainties of these parameters resulted in increased antenna pointing accuracy. The initial pointing offset was estimated to be in excess of 1 deg, and after in-flight calibration it was reduced to about 0.66 deg. About 50% of the original offset could not be calibrated, thus the improvement on the remaining offset is better than 50%.

Assefi, T.↗
NASA NTRS1982

The relationship of sensor parameters to applications data analysis

A stochastic model for the data acquisition system in a multispectral scanner system, like the one utilized by the LANDSAT satellites, is presented. A list of noise sources which are known or presumed to have a significant effect in the information extraction process was constructed. Since the shot noise introduced by the photodetectors in the sensor system is signal level dependent, an atmospheric model was adopted which could adequately describe the amount of radiation that gets into the sensors based on the atmospheric transmittance. An analysis was carried out to find the output spectral statistics in terms of the input signal statistics and the system parameters. This was integrated into a set of FORTRAN programs that when supplied with, the class statistics, the noise levels introduced by the sensor system, the atmospheric transmittance, and the atmospheric path radiance, can be used to estimate the classification performance. In order to show the beneficts of this model a series of runs were performed in which the Thematic Mapper multispectral scanner was the system under consideration.

Landgrebe, D. A.↗
NASA NTRS1983

Fixed-order dynamic compensation through optimal projection

This paper reviews a formulation for the design of fixed-order dynamic compensation for flexible mechanical systems which is based upon explicit optimality conditions derived under the minimum data/maximum entropy stochastic modelling approach. The optimality conditions give rise to the novel concept of "optimal projection' which provides significant insight with regard to the compensator structure and permits earlier, more restricted and/or ad hoc design schemes to be seen as special cases of the present formulation.

Hyland, D. C.↗
NASA NTRS1983

Multiple origins of life

There is some indication that life may have originated readily under primitive earth conditions. If there were multiple origins of life, the result could have been a polyphyletic biota today. Using simple stochastic models for diversification and extinction, we conclude: (1) the probability of survival of life is low unless there are multiple origins, and (2) given survival of life and given as many as 10 independent origins of life, the odds are that all but one would have gone extinct, yielding the monophyletic biota we have now. The fact of the survival of our particular form of life does not imply that it was unique or superior.

Raup, D. M.↗
NASA NTRS1984

Far Infrared Emission from Galaxies

The relationship between far infrared sources and star formation is discussed. It is argued that the relationship of star formation to compact nuclear sources and the relative importance of these fundamentally different types of activity in the most luminous galaxies is still unclear. Although there is evidence for a general correlation between far infrared emission and the amount of interstellar matter present, there are also indications of significant deviations from a simple stochastic model.

Harper, D. A.↗
NASA NTRS1985

Application of the Maximum Entropy/optimal Projection Control Design Approach for Large Space Structures

The underlying philosophy and motivation of the optimal projection/maximum entropy (OP/ME) stochastic modelling and reduced order control design method for high order systems with parameter uncertainties are discussed. The OP/ME design equations for reduced-order dynamic compensation including the effect of parameter uncertainties are reviewed and the application of the methodology to several large space structure (LSS) problems of representative complexity is illustrated.

Hyland, D. C.↗
NASA NTRS1984

A user's view of CARE III

The present computerized reliability predictor for digital fault-tolerant systems whose sizes are of the order of one million Markovian equivalent states, employs advanced stochastic modeling techniques and implements a mixed Markov model that enables it to drastically reduce the state size of hitherto computationally unobtainable models. Attention is given to the concepts of failure, fault, and error, in the context of the novel system's fault/error-handling models. Examples are drawn from the system's user-friendly interface dialog.

Bavuso, S. J.↗
NASA NTRS1986

Noise in remote-sensing systems - The effect on classification error

Several types of noise in remote-sensing systems are treated. The purpose is to provide enhanced understanding of the relationship of noise sources to both analysis results and sensor design. The context of optical sensors and spectral pattern recognition analysis methods is used to enable tractability for quantitative results. First, the concept of multispectral classification is reviewed. Next, stochastic models are discussed for both signals and noise, including thermal, shot and quantization noise along with atmospheric effects. A model enabling the study of the combined effect of these sources is presented, and a system performance index is defined. Theoretical results showing the interrelated effects of the noise sources on system performance are given. Results of simulations using the system model are presented for several values of system parameters, using some noise parameters of the Thematic Mapper scanner as an illustration. Results show the relative importance of each of the noise sources on system performance, including how sensor noise interacts with atmospheric effects to degrade accuracy.

Landgrebe, D. A.↗
NASA NTRS1986

The near and far acoustic fields of broadband shock associated noise

A stochastic model theory is presented which suggests that the broadband shock associated noise of supersonic jets is generated by the weak interaction between downstream propagating large turbulence structures and the quasiperiodic shock cells in the jet plume. The large turbulence structures are modelled by a superposition of the intrinsic instability waves of the mean flow of the jet, and the quasiperiodic shock cells are broken down into time-independent waveguide modes of the jet flow using multiple scales expansion. The observed broadband shock associated noise consists of a superposition of the spectra generated by the different waveguide modes. Starting from the equations of motion of a compressible fluid, formulas for calculating the far field and near field noise are developed. Good general agreement is found with previous results.

Tam, C. K. W.↗
NASA NTRS1987

CARE 3 user-friendly interface user's guide

CARE 3 predicts the unreliability of highly reliable reconfigurable fault-tolerant systems that include redundant computers or computer systems. CARE3MENU is a user-friendly interface used to create an input for the CARE 3 program. The CARE3MENU interface has been designed to minimize user input errors. Although a CARE3MENU session may be successfully completed and all parameters may be within specified limits or ranges, the CARE 3 program is not guaranteed to produce meaningful results if the user incorrectly interprets the CARE 3 stochastic model. The CARE3MENU User Guide provides complete information on how to create a CARE 3 model with the interface. The CARE3MENU interface runs under the VAX/VMS operating system.

Martensen, A. L.↗
NASA NTRS1987

Maximum Entropy/Optimal Projection (MEOP) control design synthesis: Optimal quantification of the major design tradeoffs

The underlying philosophy and motivation of the optimal projection/maximum entropy (OP/ME) stochastic modeling and reduced control design methodology for high order systems with parameter uncertainties are discussed. The OP/ME design equations for reduced-order dynamic compensation including the effect of parameter uncertainties are reviewed. The application of the methodology to several Large Space Structures (LSS) problems of representative complexity is illustrated.

Hyland, D. C.↗