Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Soot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Experimental and theoretical study of the soot-forming tendencies of furans as potential biofuels

Sustainably-produced biofuels, including furans derived from lignocellulosic biomass, are being studied as potential next-generation fuels. Biofuels have unique structures that are absent in conventional fuels and they potentially emit fewer particulates than conventional fuels because of the presence of oxygen atoms. In this work, we focus on quantification and measurement of sooting tendency. A set of furans was selected and their sooting tendencies were characterized by Yield Sooting Index (YSI), which was obtained by measuring the line-of-sight spectral radiance (LSSR) of a coflow laminar diffusion flame doped with 1000 ppm of each test fuel. The measured YSIs are lower than traditional gasoline fuels and benzenoid aromatics (e.g., YSIbenzene = 100). We also performed numerical simulations with a detailed chemical kinetic mechanism to analyze the flame chemistry of 2-methylfuran (2MF). 4→5 H-atom migration in the furan ring causes 31.0% of the total decomposition and is the dominant fuel consumption pathway leading to soot. DFT calculations via the G4 composite method were carried out to obtain activation energies (Ea) and bond dissociation energies (BDE). The results showed that the 4→5 H-atom migration in the furan ring has the second lowest Ea and subsequently forms a 1,2-diene-substituted ketone derivative as a stable species. The ring-opening products of the 4→5 H-atom migration are propyne + a linear ketene for 2-n-alkylfurans, and 1-butyne + a methyl-substituted ketene for 2-t-butylfuran. These results can explain the trends of the measured YSIs of 2-alkylfurans.

09 BIOMASS FUELS↗
NASA NTRS2022

Global Food Insecurity and Famine From Reduced Crop, Marine Fishery and Livestock Production Due to Climate Disruption From Nuclear War Soot Injection

Atmospheric soot loadings from nuclear weapon detonation would cause disruptions to the Earth’s climate, limiting terrestrial and aquatic food production. Here, we use climate, crop and fishery models to estimate the impacts arising from six scenarios of stratospheric soot injection, predicting the total food calories available in each nation post-war after stored food is consumed. In quantifying impacts away from target areas, we demonstrate that soot injections larger than 5 Tg would lead to mass food shortages, and livestock and aquatic food production would be unable to compensate for reduced crop output, in almost all countries. Adaptation measures such as food waste reduction would have limited impact on increasing available calories. We estimate more than 2 billion people could die from nuclear war between India and Pakistan, and more than 5 billion could die from a war between the United States and Russia—underlining the importance of global cooperation in preventing nuclear war.

Atmospheric soot↗
DOE OSTI2022

Soot-particle core-shell and fractal structures from small-angle X-ray scattering measurements in a flame

We have characterized soot particles measured in situ in a laminar co-flow ethylene-air diffusion flame using small-angle X-ray scattering (SAXS). The analysis includes temperature measurements made with coherent anti-Stokes Raman spectroscopy (CARS) and complements soot volume-fraction and maturity measurements made with laser-induced incandescence (LII). We compared the results of fits to the SAXS measurements using a unified model and a fractal core-shell model. Power-law parameters yielded by the unified model indicate that aggregates of primary particles are in the mass-fractal regime, whereas the primary particles are in the surface-fractal regime in the middle of the flame. Higher and lower in the flame, the primary-particle power-law parameter approaches 4, suggesting smooth primary particles. Furthermore, these trends are consistent with fits using the fractal core-shell model, which indicate that particles have an established core-shell structure in the middle of the flame and are internally homogeneous at higher and lower heights in the flame. Primary-particle size distributions derived using the fractal core-shell model demonstrate excellent agreement with distributions inferred from transmission electron microscopy (TEM) images in the middle of the flame. Higher in the flame, a second small mode appears in the size distributions, suggesting particle fragmentation during oxidation. Surface oxidation would explain (1) aggregate fragmentation and (2) loss of core-shell structure leading to smoother primary-particle surfaces by removal of carbon overlayers. SAXS measurements are much more sensitive to incipient and young soot particles than LII and demonstrate significant volume fraction from particles low in the flame where the LII signal is negligible.

42 ENGINEERING↗
DOE OSTI2021

Influence of O 2 / N 2 oxidizer blends on soot formation and radiative heat flux in PMMA-air 2D slab burner for understanding hybrid rocket combustion

The focus of this study is to establish a correlation between the flame to fuel incident radiative heat flux (RHF) in 1D steady-state diffusion flames to non-intrusively measured RHF in 2D slab burner experiments for a range of O 2 /N 2 oxidizer blends. Slab burner experiments are conducted for a range of increasing O 2 concentrations from 17% to 100% in the oxidizer stream. Non-intrusive two-color pyrometry is used to determine flame temperature, soot volume fraction, and flame to fuel surface RHF. Measurements and modeling confirm soot volume fraction attains a local maximum for an O 2 concentration of 45%. Low-strain diffusion flame modeling shows the reason for the local maximum is the relative location of the soot formation/nucleation fronts relative to oxidation which decreases with increasing O 2 concentration. Overall good agreement between modeling and measurements of radiative heat flux to the fuel is observed for the fuel and range of O 2 concentrations considered. Furthermore, these results demonstrate the viability of using flamelet modeling approaches for describing hybrid rocket motors.

2D slab burner↗
DOE OSTI2022

Temperature measurements in heavily-sooting ethylene/air flames using synchrotron x-ray fluorescence of krypton

High-fidelity temperature field measurements have been made for several heavily-sooting ethylene/air flames that have historically been challenging environments for conventional optical diagnostics. These challenges have largely been overcome here, in this study, by conducting x-ray fluorescence (XRF) measurements of a Kr fluorescent agent in the hard x-ray regime (15 keV). The current methodology presents a more economical diagnostic than a previously reported implementation of the Kr-XRF method, by limiting seeding of the expensive fluorescent agent to only the fuel stream flows. Detailed reacting flow simulations have been used to interpret experimental signals by tracking the mole fraction of the fluorescent agent in the flow field. Simulated Kr densities are in excellent agreement with measurements throughout the flow field. Temperature measurements of the flow field also agree well with simulations and recent literature studies. However, uncertainties in the measurements become increasingly large downstream of the burner surface as the krypton fraction drops due to mixing of the fuel and co-flow streams. Additionally, we demonstrate that soot particles in the heavily sooting flames studied do not impede the Kr-XRF measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Aerosol-Cloud Interactions From Aviation Soot Emissions

Current models estimate global aviation contributes approximately 5% to the total anthropogenic climate forcing, with aerosol-cloud interactions having the greatest effect. However, radiative forcing estimates from aviation aerosol-cloud interactions remain undetermined. There is an expected significant increase in aircraft emissions with aviation demand expected to rise by over 4% per year. Soot may play an important role in the ice nucleation of aircraft-induced cirrus formation due to a high emission rate, but the ice nucleating properties are poorly constrained. Understanding the microphysical processes leading to atmospheric ice crystal formation is crucial for the reliable parameterization of aerosol-cloud interactions in climate models due to their impact on precipitation and cloud radiative properties. Ice nucleation of aircraft-emitted soot is potentially affected by particle morphology with condensation of supercooled water occurring in pores followed by ice nucleation. However, soot has heterogeneous properties and undergoes atmospheric aging and oxidation that could change surface properties and contribute to complex ice nucleation processes. Further, this review synthesizes current knowledge of ice nucleation catalyzed by aviation in the cirrus regime and its effects on global radiative forcing. Further research is required to determine the ice nucleation and microphysical processes of cirrus cloud formation from aviation emissions in both controlled laboratory and field investigations to inform models for more accurate climate predictions and to provide efficient mitigation strategies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Modeling soot growth in Comp-B using a detonation history

A chemical kinetics procedure for soot formation calculation is summarized. By importing Lagrangian hydrodynamic calculations, species history is consistently accounted for. Detonation product composition is assumed in region with the burnt high explosive (HE). Soot formation is calculated using the density and energy obtained in the hydrodynamics calculation of HE detonation. Ideal gas equation-of-state (EOS) with temperature-dependent specific heat is used in the HE product region. Sample calculations show reasonably-expected temperature and soot formation.

42 ENGINEERING↗
NASA NTRS2016

Optics of Water Microdroplets with Soot Inclusions: Exact Versus Approximate Results

We use the recently generalized version of the multi-sphere superposition T-matrix method (STMM) to compute the scattering and absorption properties of microscopic water droplets contaminated by black carbon. The soot material is assumed to be randomly distributed throughout the droplet interior in the form of numerous small spherical inclusions. Our numerically-exact STMM results are compared with approximate ones obtained using the Maxwell-Garnett effective-medium approximation (MGA) and the Monte Carlo ray-tracing approximation (MCRTA). We show that the popular MGA can be used to calculate the droplet optical cross sections, single-scattering albedo, and asymmetry parameter provided that the soot inclusions are quasi-uniformly distributed throughout the droplet interior, but can fail in computations of the elements of the scattering matrix depending on the volume fraction of soot inclusions. The integral radiative characteristics computed with the MCRTA can deviate more significantly from their exact STMM counterparts, while accurate MCRTA computations of the phase function require droplet size parameters substantially exceeding 60.

cloud droplets↗
DOE OSTI2020

Elucidating the Chemical Pathways Responsible for the Sooting Tendency of 1 and 2-phenylethanol

Yield Sooting Index (YSI) measurements have shown that oxygenated aromatic compounds (OACs) tend to have lower YSI than aromatic hydrocarbon (AHC) compounds. For example, typical AHCs such as toluene and ethyl benzene have a YSI of 170 and 216, respectively, in contrast, OACs such as phenol and anisole have a YSI of 81 and 111, respectively. However, this trend is not always true as was observed for the structural isomers 1-phenylethanol (1PE, YSI=142) and 2-phenylethanol (2PE, YSI=207), where 2PE contains a YSI more representative of AHCs than OACs. We applied flow reactor experiments and density functional theory (DFT) calculations to examine how oxygen functionality present in 1PE and 2PE alters the reaction pathways leading to the observed difference in soot formation. It was determined that the proximity of the oxygen functional group to the aromatic ring determines whether the oxygen remains attached to the primary reacting species (for 1PE) or is eliminated early in the combustion sequence (for 2PE). For these alcohols, preservation of the oxygen in the molecule leads to further OACs, while loss of the oxygen leads to AHCs and benzyl radical. The direct pathways to AHCs and benzyl radical result in the higher YSI observed for 2PE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Extinction Imaging Diagnostics for In Situ Quantification of Soot within Explosively Generated Fireballs

Fireballs produced from the detonation of high explosives often contain particulates primarily composed of various phases of carbon soot. The transport and concentration of these particulates is of interest for model validation and emission characterization. Here, this work proposes ultra-high-speed imaging techniques to observe a fireball's structure and optical depth. An extinction-based diagnostic applied at two wavelengths indicates that extinction scales inversely with wavelength, consistent with particles in the Rayleigh limit and dimensionless extinction coefficients which are independent of wavelength. Within current confidence bounds, the extinction-derived soot mass concentrations agree with expectations based upon literature reported soot yields. Results also identify areas of high uncertainty where additional work is recommended.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Single-particle chemical analysis reveals organic-rich detonation soot products

The detonation of high explosives produces a wide variety of particulate matter (PM) with distinct properties, not all of which are traditionally studied for chemical composition, formation processes, and forensic applications. We report particle-resolved measurements of Composition B detonation soot using soot particle aerosol mass spectrometry (SP-AMS), identifying carbonaceous species and metals not previously characterized on a single-particle basis. Results are combined with scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) to enhance source-dependent signatures. Black carbon, including graphitic carbon and detonation nanodiamonds, contributed 50.5-71.4% of PM 2.5 mass, while 22.5-43.4% was non-refractory organic carbon, a previously overlooked component that exhibited a complex and varying composition. Detonations were performed with and without PMMA confinement and under steady and overdriven conditions. Distinct particles enriched with polycyclic aromatic hydrocarbons (PAHs) were observed in experiments utilizing confinement, with quantities dependent on manufacturing method. SEM-EDS validated SP-AMS findings of metals internally mixed with carbonaceous species and extended the particle size range to 100 µm. This work makes detecting non-refractory organics using single-particle techniques more feasible for detonation forensics and understanding high-energy soot formation. While this analysis uses offline sample collection, SP-AMS could be deployed for in-situ measurements of detonation PM 2.5 transported in the atmosphere.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development and Optimization of a Multi-Functional SCR-DPF Aftertreatment System for Heavy-Duty NOX and Soot Emission Reduction

The objective of this project is to develop a strategy for the integration of catalytic NOX emission control and particulate matter emission control into a single device for the successful application to heavy-duty on-road diesel engine exhaust aftertreatment. The critical attributes of such a device, for successful application to PACCAR fleet, are as follows: 1. Must have sufficient filtration efficiency and successfully demonstrate soot management strategies (i.e., oxidation) to be economically attractive and regulatory compliant for particulate matter abatement. 2. In particular, the integrated device must retain sufficiently high soot oxidation capacity with NO2 (i.e., passive soot oxidation) across an applicable engine test cycle to be economically attractive. 3. Must exhibit sufficient catalytic NOX reduction activity in an economically-attractive fashion that is regulatory compliant.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

SAF Combustion & Soot Processes [Slides]

The atomization, mixing, combustion and emissions characteristics of aviation fuels were measured using a novel approach based on a non-continuous injection scheme called the single-hole atomizer (SHA). High-speed microscopy revealed differences between fuels in terms of evaporation and mixing regimes over conditions relevant to modern and next generation aero-engine combustors. Measurements of liquid and vapor penetration, mixing fields, combustion and emissions metrics (ignition delay, lift-off length, PAH formation, soot mass) highlighted the effects of fuels and combustor conditions. The experimental results are being leveraged to adjust and validate chemical and CFD models. Detailed analysis of sampled soot showed subtle differences in soot morphology between fuels. The results revealed the presence of contaminants potentially affecting surface chemistry and the nucleation propensity of water droplets on particles. Chemical mechanisms for NJFCP A-2, C-1 and C-4 showed good performance over a large parameter space. Spray breakup at relight conditions is vastly different from the atomization observed at high pressure. CFD simulations of the SHA target conditions confirmed the good behavior of the C-1 kinetic mechanism. The simulations support the strong relationship between low and high temperature reactions. New altitude chamber facility to enable detailed characterization of the heterogeneous nucleation process of water on aerosol particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

In situ Characterization of Soot Aggregates Produced by Burning Contaminated Liquid Fuels with Nuclear Waste Surrogate

The motivation of this work was to complement other studies intended to enhance and update DOE-HDBK-3010-94 for hazard scenarios like nuclear waste fires. In this work, a uniquely designed combustion chamber was successfully integrated with a light scattering technique to characterize soot aggregates. The chamber design allowed for soot investigation within the flame as well as after soot left the incandescent flame region.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Quantification of carbon phases in detonation soot

Soot is a powdery substance composed of solid residues that results from the incomplete combustion of hydrocarbons. Soot holds valuable information because its chemical makeup can provide answers for condensed carbon kinetics in HE detonations by quantitively identifying what carbon species remain. For carbon-rich explosives, this is particularly important because carbon kinetics is a major pathway for energy release. Current efforts have been able to qualitatively identify the carbons and confirm their presence, but we haven’t been able to successfully quantify them. For example, small angle x-ray diffraction has been fielded to qualitatively identify carbon phases as a function of time during a detonation (work by Trevor Willey and Mike Nielson). Other work (ice experiments) has focused on measuring the “effective” static cold curve equation of state (EOS) of the recovered carbon soots.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1971

Shock-tube measurements of carbon to oxygen atom ratios for incipient soot formation with C2H2, C2H4 and C2H6 fuels

The critical atomic carbon to oxygen ratios, Phi sub C, for incipient soot formation in shock heated acetylene, ethylene, ethane/oxygen/ argon mixtures was measured over the temperature range 2000 K to 2500 K for reactant partial pressures between 0.1 and 0.4 atoms. Absorption of light from a He-Ne laser at 6328A was was used to detect soot. It was observed that the values of Phi sub C for all three fuels increased uniformly with temperature such that at the highest temperatures Phi sub C was considerably greater than unity, i.e. greater than the value of about unity at which solid carbon should have been precipitated on a thermochemical equilibrium basis. Observations were made over periods extending up to about one millisecond, which was well in excess of the time required for the major heat release of the combustion reactions. The relevance of these experimental findings to the problem of soot formation in gas turbine combustion chambers is discussed.

Radcliffe, S. W.↗
NASA NTRS1971

Soot oxidation rates in gas turbine engines

A basis is proposed for extrapolating soot oxidation rate measurements obtained in laboratory flames to the more extreme operating conditions of gas turbine combustion chambers. The proposal is based on the observation that, within probable experimental uncertainty, the limited soot oxidation measurements correlate with the more extensive measurements of the surface oxidation rates of macroscopic samples of pyrographite. The soot oxidation rates thus determined for the conditions of a typical gas turbine combustion chamber are considerably lower than estimates which were based on simple extrapolations of the flame data.

Radcliffe, S. W.↗