Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solid mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Horizontal 1 K refrigerator with novel loading mechanism for polarized solid targets

We describe a helium evaporation refrigerator used to cool dynamically polarized proton and deuteron targets for electron-scattering experiments using the CEBAF Large Acceptance Spectrometer CLAS12 at Jefferson Lab. The geometry of the CLAS12 detector systems places severe design and construction constraints on the refrigerator and its ancillary equipment, resulting in a horizontal cryostat with a length of 4 m. The 16 cm 3 target samples, consisting of frozen ammonia (NH 3 or ND 3 ), are loaded at the upstream end of the cryostat and moved to the beam-interaction region using a novel transport mechanism. At this location they are cooled with superfluid helium and polarized via dynamic nuclear polarization at 1 K and 5 T. In this manner samples can be replaced and cooled to 1 K in about 30 minutes without disturbing any elements of the electron beam line or particle detection system. In conclusion, we estimate that this method saved 18 days of valuable beam time over the course of a recent, 88-day long experiment.

Evaporation refrigerator↗
DOE OSTI2021

Direct Observation of Interfacial Mechanical Failure in Thiophosphate Solid Electrolytes with Operando X-Ray Tomography

Herein, the mechanical behaviors of Li 10 GeP 2 S 12 (LGPS) solid electrolytes during electrochemical cycling using operando X-ray tomography are investigated. It is demonstrated that the bulk mechanical decomposition of LGPS when cycled against lithium is a direct result of electrochemical reduction of the solid electrolyte at the LGPS/Li 0 interface. The reductive decomposition of LGPS during lithium plating results in the formation of low-density domains at the electrode/electrolyte interface, which impose sufficient mechanical stress on the underlying LGPS to crack the SE pellet. The critical stress developed prior to pellet fracture is significantly lower than the bulk shear modulus of LGPS, suggesting that the electrochemical instability of LGPS dramatically worsens the mechanical stability of the material near the LGPS/Li 0 interface. It is also shown that the application of a highly concentrated liquid electrolyte to the LGPS surface suppresses the reductive decomposition of LGPS, improving both the electrochemical performance and mechanical stability of the bulk LGPS solid electrolyte.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermal, mechanical, and electrical properties of LSCo/mullite composite contact materials for solid oxide fuel cells

Lanthanum strontium cobaltite (LSCo) is considered as a good candidate cathode contact material for solid oxide fuel cells, due to high electrical conductivity. However, LSCo has a very large coefficient of thermal expansion (CTE) than the cells and metallic interconnects. As a result, poor mechanical stability is expected during thermal cycling. To minimize the CTE mismatch, we investigate a composite approach involving mixing LSCo with an inert material of low CTE, such as mullite at volume fractions from 0.1 to 0.4. Composite’s CTE shows a decreasing trend with increasing mullite volume fractions, and is consistent with model predictions. X-ray powder diffraction analysis of sintered LSCo/mullite composites exhibits no presence of other phases for samples aged for 500h at 800oC, indicating chemical compatibility. Electrical conductivity by a 4-pt method shows a decreasing trend with increasing mullite content. Contact strength of as-sintered and thermally cycled samples show that only the composite with 0.4 volume fraction has a measurable strength; the other composites have no strength. Overall, the composite approach is demonstrated in the LSCo/mullite system to lower the CTE and hence achieve thermal cycle stability. The addition of the inert phase to the LSCo matrix; however, also reduces the electrical conductivity.

Contact materials, LSCo, mullite, CTE, electrical ↗
DOE OSTI2025

Phase-field modeling of orientation-dependent crack growth in ductile single crystals with anisotropic elasticity

Crack growth in ductile single crystals (DuSCs) is orientation dependent due to the anisotropies of crystal plasticity and elastic tensor. This study develops a phase-field model incorporating both crystal plasticity and crack growth and proposes a general method to decompose the elastic energy into compressive and tensile parts to prevent crack growth under compression in the phase-field description. The phase-field model, in combination with three Euler angles, is employed to simulate orientation-dependent crack growth in DuSCs. The contributions from crystal plasticity and anisotropic elasticity are compared, and the former is found to dominate in the anisotropy of crack growth in copper single crystals. Furthermore, the simulation results demonstrate that crystal orientation strongly affects the heterogeneous distribution of plastic strain and the interaction between plastic strain and crack growth. High-throughput phase-field simulations are performed with exhaustive crystal orientations, and the results are explained based on the anisotropy of the Taylor factor.

Computational Solid Mechanics↗
DOE OSTI2020

Real-Time Observation of the Diffusion Mechanism Progression from Liquid to Solid State of Transition Metal Complexes

Copper complexes have recently shown remarkable performance upon conversion from liquid-based to solid-state hole transport materials (HTMs) in mesoscopic solar cells; however, the diffusion mechanism is not clear. Here, we apply an in situ solidification analysis of the charge diffusion and find that the dominant mechanism of [Cu(dmbpy) 2 ] 2+/+ (dmbpy = 6,6'-dimethyl-2,2'-bipyridine) changes from ionic to electronic diffusion. Through use of the modified Dahms–Luff equation, a fast self-exchange rate constant of hole-hopping in the HTM of 8.3 × 10 8 (±5 × 10 7 ) M –1 s –1 is calculated, which indicates a small reorganization energy of 0.47 eV. These findings present a new methodology to analyze the transport mechanism of solids, reveal the mechanism of charge transport in molecular-based HTMs, and offer insight into ways to control the flow of charge in optoelectronic systems

14 SOLAR ENERGY↗
DOE OSTI2021

Mechanical studies of the solid electrolyte interphase on anodes in lithium and lithium ion batteries

A stable solid electrolyte interphase (SEI) layer is key to high performing lithium ion batteries for metrics such as calendar and cycle life. The SEI must be mechanically robust to withstand large volumetric changes in anode materials such as lithium and silicon, so understanding the mechanical properties and behavior of the SEI is essential for the rational design of artificial SEI and anode form factors. The mechanical properties and mechanical failure of the SEI are challenging to study, because the SEI is thin at only ~ 10 – 200 nm thick and is air sensitive. Furthermore, the SEI changes as a function of electrode material, electrolyte and additives, temperature, potential, and formation protocols. A variety of in situ and ex situ techniques have been used to study the mechanics of the SEI on a variety of lithium ion battery anode candidates; however, there hasn't been a succinct review of the findings thus far. Because of the difficultly of isolating the true SEI and its mechanical properties, there have been a limited number of studies that can fully de-convolute the SEI from the anode it forms on. A review of past research will be helpful for culminating current knowledge and helping to inspire new innovations to better quantify and understand the mechanical behavior of the SEI. This review will summarize the different experimental and theoretical techniques used to study the mechanics of SEI on common lithium ion battery anodes and their strengths and weaknesses.

25 ENERGY STORAGE↗
DOE OSTI2021

Three-dimensional thermo-mechanical simulations of heterogeneous solid propellants

Here in this work, we present a numerical framework that describes thermo-mechanical deformations in a burning heterogeneous solid propellant. These deformations are quasi-static at time scales associated with combustion, and the resulting thermo-mechanical formulation is discretized on a Cartesian grid using a hypoelastic law. We use a weak form of Chorin-type projection method to deal with large difference in shear modulus of the constituent materials. Extending our previous two-dimensional work, grid convergence studies for a three-dimensional propellant configuration are presented for the stress, velocity, and reference map components. Finally, simulations are carried out for a random propellant pack that is coupled to a gas phase, and we present results for the pack undergoing combustion, with and without deformations.

simulations↗
DOE OSTI2022

EEL: A MOOSE-based Application for 3D Electro-Chemo-Thermo-Mechanical Modeling of Solid-State Batteries

This report describes a tool for three dimensional, high fidelity, coupled electro-chemo-thermo-mechanical modeling of solid-state batteries. A complete version of the tool is available as open source software at https://github.com/hugary1995/eel.git. The theoretical framework of the tool revolves around an inf-sup statement on a total potential, comprising the Helmholtz free energy, the electrical kinetic potential, the chemical potential, the Fourier potential, the chemical reaction potential, and the external power expenditure. The tool uses the finite element framework of Multiphysics Object-Oriented Simulation Environment (MOOSE) and a variational formulation to solve the boundary value problem for solid-state battery incorporating the full set of multiphysics couplings. The variational formulation also enables a modular software architecture for the tool so additional physics can be easily included by specifying the new contribution to the total potential. The report discusses several method of manufactured solutions that were used to verify the implementation of different physics and the Butler-Volmer reaction kinetics at the electrolyte-electrode interface. Finally, the report discusses results from complete charge/discharge simulations of a quasi-1D and a 3D solid-state battery.

25 ENERGY STORAGE↗
DOE OSTI2020

Eulerian thermo-mechanical simulations of heterogeneous solid propellants using an approximate projection method

We present a mathematical model that describes thermo-mechanical deformations and thermal gradients on the unsteady burning of a heterogeneous solid propellant. A scaling study shows that the deformations in solid at combustion timescales can be treated as quasi-static. The resulting thermo-mechanical formulation is formulated on a Cartesian grid and makes use of a weak form of Chorin-type projection method to deal with large difference in shear modulus of constituent materials. Further, a one-dimensional verification study is carried out by comparing numerical simulations with those of an analytical model. In addition, convergence studies for a two-dimensional propellant sandwich configuration are presented for the stress, velocity, and reference map components. Finally, simulations are carried out for a two-dimensional random propellant pack and the time-averaged burn rate and strains are reported.

42 ENGINEERING↗
DOE OSTI2025

Toward engineering lattice structures with the material point method (MPM)

This study examines the potential of two variants of the material point method—the generalized interpolation material point (GIMP) and dual domain material point (DDMP) methods—in developing a robust computational framework for engineering lattice structures under different loading conditions. The study begins with assessing the ability of the two methods in predicting elastic buckling phenomena using column geometries with and without initial geometric imperfections. The results indicate that both methods effectively capture buckling phenomena when initial geometric imperfections are introduced. After this verification step, we create several models of tetrahedral lattice structures with varying strut diameter and orientation and subject them to quasi-static loading. We then validate the numerical results using laboratory test results. The results show that, while both methods accurately predict load–displacement curves in the pre-buckling regime, their predictive capabilities diminish in the post-buckling regime. Through visual comparison between the numerical and experimental deformed shapes, it appears that the discrepancies between model and experimental results are attributed to initial geometric imperfections in the lattices that occurred during 3D printing. We then establish a second set of lattice models where different types of initial geometric imperfections are considered. The results from these models show that imperfections have a negligible influence in the pre-buckling regime but affect the behavior considerably in the post-buckling regime. As a final step in this work, we subject the lattice models to impact loading and employ hypothetical soft and stiff materials. These results show that the lattice stiffness, which depends on material stiffness, strut diameter, and orientation, significantly influences the ability of a lattice structure to resist impact. In particular, we find that a stiffer lattice (i.e., one made with a stiff material and thicker struts) is capable of absorbing more energy than a softer one during impact. Although material nonlinearities, inelasticity, and detailed contact formulations are not considered in this study, the findings obtained herein lay the groundwork for engineering lattice structures under extreme loading conditions through a simulation-driven framework based on particle-based methods.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Fundamental Investigations of Mechanical and Chemical Degradation Mechanisms in Lithium Ion Battery Materials (Final Technical Report)

The objective of our effort under the DOE EPSCoR Implementation grant is to establish a comprehensive and internationally recognized research program at Brown University and University of Rhode Island in understanding degradation mechanisms and to improve the cycle and calendar life of lithium ion battery (LIB) materials. A series of basic investigations are undertaken to characterize the mechanical and chemical degradation mechanisms, which can help enable new higher capacity and longer lasting electrode designs. Controlling mechanical and chemical degradation is the primary challenge in developing the next generation of higher energy density batteries. The development of failure resistant battery microstructures will require a fundamental understanding of the evolution of stress, deformation, damage, and electrochemistry in battery materials during cyclic charging and discharging. In addition, controlling the reactions at the electrode/electrolyte interface is critical for the formation of a stable SEI layer. We address these issues through a combination of controlled experiments on model battery materials and practical composite electrodes, together with multi-scale computations. Our effort is organized into three focus areas that encompass many critical challenges in Lithium Ion Battery Technologies: (i) Mechanical properties, fracture and damage in electrode materials; (ii) Chemistry and Mechanics of Solid Electrolyte Interphase (SEI); (iii) Mechanical and Chemical Integrity of Solid-Solid Interfaces in Practical Electrodes.

25 ENERGY STORAGE↗
DOE OSTI2023

A Three-Dimensional, Thermodynamically and Variationally Consistent, Fully Coupled, Electro-Chemo-Thermo-Mechanical Model of Solid-State Batteries

Here we present a theoretical framework for high fidelity modeling of three-dimensional electro-chemo-thermo-mechanical coupled systems such as solid-state batteries. The framework provides a useful means of utilizing molecular level information to predict the overall performance of the system at the continuum level. The central statement of the theoretical framework is a thermodynamically consistent inf-sup problem. The total potential of the coupled system consists of the Helmholtz free energy, the electrical kinetic potential, the chemical potential, the Fourier potential, the chemical reaction potential, and the external power expenditure. All governing equations derive from variational principles. We also show that the resulting initial-boundary-value problem (IBVP) is consistent with existing, widely adopted equations for modeling batteries. Moreover, the IBVP can be naturally discretized using the (variational) finite element method to simulate practical solid-state batteries with arbitrary geometries. Several examples illustrate multiphysics coupling between pairs of the physical field equations, culminating in a comprehensive three-dimensional model of charge-discharge in a solid state battery.

25 ENERGY STORAGE↗
DOE OSTI2022

Differences in the Interfacial Mechanical Properties of Thiophosphate and Argyrodite Solid Electrolytes and Their Composites

Interfacial mechanics are a significant contributor to the performance and degradation of solid-state batteries. Spatially resolved measurements of interfacial properties are extremely important to effectively model and understand the electrochemical behavior. Herein, we report the interfacial properties of thiophosphate (Li 3 PS 4 )- and argyrodite (Li 6 PS 5 Cl)-type solid electrolytes. Using atomic force microscopy, we showcase the differences in the surface morphology as well as adhesion of these materials. Additionally we investigate solvent-less processing of hybrid electrolytes using UV-assisted curing. Physical, chemical, and structural characterizations of the materials highlight the differences in the surface morphology, chemical makeup, and distribution of the inorganic phases between the argyrodite and thiophosphate solid electrolytes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural metamaterials with innate capacitive and resistive sensing

Interpenetrating lattices consist of two or more interwoven but physically separate sub-lattices with unique behaviors derived from their multi-body construction. If the sublattices are constructed or coated with an electrically conducting material, the close proximity and high surface area of the electrically isolated conductors allow the two lattices to interact electromagnetically either across the initial dielectric filled gap or through physical contact. Furthermore, changes in the size of the dielectric gap between the sub-lattices induced by deformation can be measured via capacitance or resistance, allowing a structurally competent lattice to operate as a force or deformation sensor. In addition to resistive and capacitive deformation sensing, this work explores capacitance as a fundamental metamaterial property and the environmental sensing behaviors of interpenetrating lattices.

Computational Solid Mechanics↗