Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar Futures Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Silicon-sheet and thin-film cell and module technology potential: Issue study

The development of high-efficiency low-cost crystalline silicon ribbon and thih-film solar cells for the energy national photovoltaics program was examined. The findings of an issue study conducted are presented. The collected data identified the status of the technology, future research needs, and problems experienced. The potentials of present research activities to meet the Federal/industry long-term technical goal of achieving 15 cents per kilowatt-hour levelized PV energy cost are assessed. Recommendations for future research needs related to crystalline silicon ribbon and thin-film technologies for flat-plate collectors are also included.

Shimada, K.↗

Development and Design of Zero-g Liquid Quantity Gauge for Solar Thermal Vehicle

The development and design of a cryogenic liquid quantity gauge for zero-gravity (zero-g) applications are described. The gauge, named the compression mass gauge (CMG), operates on the principle of slightly changing the volume of the tank by an oscillating bellows. The resulting pressure change is measured and used to predict the volume of vapor in the tank, from which the volume of liquid is computed. For each gauging instance, pressures are measured for several different bellows frequencies to enable minor real-gas effects to be quantified and thereby to obtain a gauging accuracy of 11 percent of tank volume. The CMG has been selected by NASA's Future-X program for a flight demonstration on the United States Air Force-Boeing Solar Orbit Transfer Vehicle Space Experiment (SOTVSE). This report reviews the design trade studies needed for the CMG to satisfy the SOTVSE limitations on its power, volume, and mass and also describes the mechanical design of the CMG.

Dodge, Franklin T.↗

Apollo 16 preliminary science report

Ever since Galileo's telescope made the rugged lunar surface more clearly visible (in 1610), men have strived to learn more about the origin and history of the Earth's big natural satellite, and never has so much progress been made as in the last few years. The fifth manned lunar landing was in a highlands area, quite different from the sites visited previously, and the discoveries there now seem certain to result in significant improvements in the hypotheses of lunar scientists. Much of the Moon's surface is similar to the Descartes Highlands that the Apollo 16 astronauts examined. From this highly productive mission, more photographs were obtained than on any previous Apollo flight, a greater amount of time was spent outside the lunar module, a greater weight of scientific equipment landed on the Moon, and a record weight of scientific samples was brought back to laboratories on Earth. The network of automatic scientific stations at work on the Moon was extended into a new area and has since detected a moonquake caused by the largest meteoroid impact that has yet been recorded. Additional experiments on the surface and in flight also were successfully performed on this mission for the enlightenment of students of natural phenomena. The Apollo 16 astronauts observed, and scientists studying material they collected have subsequently deduced, that this landing site differed surprisingly from earlier expectations. Future generations consequently may benefit from better concepts of the operation of the solar system and events throughout the physical universe than have hitherto been possible. This volume is but one of a series of NASA Special Publications being issued promptly to document potentially significant discoveries in the course of the Apollo Program, thereby possibly increasing their usefulness to scientists grappling with problems that have long perplexed mankind.

NASA Editorial Review Board↗

Space-based solar power conversion and delivery systems study

Even at reduced rates of growth, the demand for electric power is expected to more than triple between now and 1995, and to triple again over the period 1995-2020. Without the development of new power sources and advanced transmission technologies, it may not be possible to supply electric energy at prices that are conductive to generalized economic welfare. Solar power is renewable and its conversion and transmission from space may be advantageous. The goal of this study is to assess the economic merit of space-based photovoltaic systems for power generation and a power relay satellite for power transmission. In this study, satellite solar power generation and transmission systems, as represented by current configurations of the Satellite Solar Station (SSPS) and the Power Relay Satellite (PRS), are compared with current and future terrestrial power generation and transmission systems to determine their technical and economic suitability for meeting power demands in the period of 1990 and beyond while meeting ever-increasing environmental and social constraints.

Source record↗

Earth-based studies

Theoretical understanding of geologic processes of all planets and satellites is the ultimate goal of comparative geologic studies, simply because it is not possible to sample and study all bodies in the solar system in situ. Theories must make verifiable predictions, be able to test the aptness of terrestrial analogs, and ultimately should provide direction for future planetary research.

Dwornik, S.↗

Spacelab to Space Station; Proceedings of the International Symposium on Spacelab 1 - Results, Implications and Perspectives, Naples and Capri, Italy, June 11-16, 1984

Consideration is given to the scientific objectives of the Spacelab program, a review of data obtained during the STS-9/Spacelab 1 mission on board the Shuttle, and the coordination of future Spacelab research among participating European nations. Among the specific fields of study covered by Spacelab 1 were space plasma physics, materials and fluid sciences and technology, astronomy and solar physics, and atmospheric physics and earth observations. Consideration is also given to the legal aspects of space manufacturing activities, the role of private industry in space-based manufacturing ventures, plant production and breeding in space, and the development of remote sensing systems for use in a microgravity environment.

Napolitano, L. G.↗

Traces of Catastrophe: A Handbook of Shock-Metamorphic Effects in Terrestrial Meteorite Impact Structures

This handbook of Shock-Metamorphic Effects in Terrestrial Meteorite Impact Structures emphasizes terrestrial impact structures, field geology, and particularly the recognition and petrographic study of shock-metamorphic effects in terrestrial rocks. Individual chapters include: 1) Landscapes with Craters: Meteorite Impacts, Earth, and the Solar System; 2) Target Earth: Present, Past and Future; 3) Formation of Impact Craters; 4) Shock-Metamorphic Effects in Rocks and Minerals; 5) Shock-Metamorphosed Rocks (Impactities) in Impact Structures; 6) Impact Melts; 7) How to Find Impact Structures; and 8) What Next? Current Problems and Future Investigations.

French, Bevan M.↗

Science and technology results from the OSS-1 payload on the Space Shuttle

The OSS-1 Payload of nine experiments was carried on the STS-3 Space Shuttle flight in March of 1982. The OSS-1 Payload contained four instruments that evaluated specific aspects of the Orbiter's environment, including the levels of particulate, gaseous and electromagnetic emissions given off by the Orbiter, and the interactions between the Orbiter and the surrounding plasma. In addition to these environmental observations, these instruments performed scientific investigations in astronomy and in space plasma physics, including active experiments in electron beam propagation. Other experiments were in the areas of solar physics, plant growth, micrometeorite studies and the technology of actively controlled heat pipes. We present the initial results from these experiments, with some implications of these results for future operation of space experiments from the Shuttle payload bay. One major result was the unexpected discovery of a faint surface-induced optical glow created near the Shuttle surfaces by impacts of ambient atmospheric atoms and molecules.

short duration↗

The Peculiar Volatile Composition of CO-Dominated Comet C/2016 R2 (PanSTARRS)

Comet C/2016 R2 (PanSTARRS) has a peculiar volatile composition, with CO being the dominant volatile, as opposed to H2O, and one of the largest N2/CO ratios ever observed in a comet. Using observations obtained with the Spitzer Space Telescope, NASA’s Infrared Telescope Facility, the 3.5 m Astrophysical Research Consortium telescope at Apache Point Observatory, the Discovery Channel Telescope at Lowell Observatory, and the Arizona Radio Observatory 10 m Submillimeter Telescope, we quantified the abundances of 12 different species in the coma of R2 PanSTARRS: CO, CO2, H2O, CH4, C2H6, HCN, CH3OH, H2CO, OCS, C2H2, NH3, and N2. We confirm the high abundances of CO and N2 and heavy depletions of H2O, HCN, CH3OH, and H2CO compared to CO reported by previous studies. We provide the first measurements (or most sensitive measurements/constraints) on H2O, CO2, CH4, C2H6, OCS, C2H2, and NH3, all of which are depleted relative to CO by at least 1–2 orders of magnitude compared to values commonly observed in comets. The observed species also show strong enhancements relative to H2O, and, even when compared to other species like CH4 or CH3OH, most species show deviations from typical comets by at least a factor of 2–3. The only mixing ratios found to be close to typical are CH3OH/CO2 and CH3OH/CH4. The CO2/CO ratio is within a factor of 2 of those observed for C/1995 O1 (Hale- Bopp) and C/2006 W3 (Christensen) at a similar heliocentric distance, though it is at least an order of magnitude lower than many other comets observed with AKARI. While R2 PanSTARRS was located at a heliocentric distance of 2.8 au at the time of our observations in 2018 January/February, we argue, using sublimation models and comparison to other comets observed at similar heliocentric distance, that this alone cannot account for the peculiar observed composition of this comet and therefore must reflect its intrinsic composition. We discuss possible implications for this clear outlier in compositional studies of comets obtained to date and encourage future dynamical and chemical modeling in order to better understand what the composition of R2 PanSTARRS tells us about the early solar system.

McKay, Adam J.↗

Lunar Lander project: A study on future manned missions to the Moon

This project is based on designing a small lunar probe which will conduct research relating to future manned missions to the moon. The basic design calls for two experiments to be run. The first of these experiments is an enclosed environment section which will be exposed to solar radiation while on the moon. The purpose of this experiment is to determine the effect of radiation on an enclosed environment and how different shielding materials can be used to moderate this effect. The eight compartments will have the following covering materials: glass, polarized glass, plexiglass, polyurethane, and boron impregnated versions of the polyurethane and plexiglass. The enclosed atmosphere will be sampled by a mass spectrometer to determine elemental breakdown of its primary constituents. This is needed so that an accurate atmospheric processing system can be designed for a manned mission. The second experiment is a seismic study of the moon. A small penetrating probe will be shot into the lunar surface and data will be collected onboard the lander by an electronic seismograph which will store the data in the data storage unit for retrieval and transmission once every twenty-three hours. The project is designed to last ten years with possible extended life for an additional nine years at which point power requirements prevent proper functioning of the various systems.

Source record↗

Development of a Space Irradiance Simulator for Advanced Studies and Materials Research

A lab-scale experimental apparatus that mimics the solar-thermal environment of space has recently been developed and tested at NASA Kennedy Space Center in support of novel materials research for future space science and exploration applications. The Space Irradiance Simulator (SIRS) apparatus exposes specimens up to roughly 61 mm in diameter to a similar thermal environment that exists at distances as close as 0.4 AU from the Sun. This includes a high vacuum environment, access to a deep cryogenic background temperature with optical properties that closely imitate a blackbody, and irradiance from a broadband solar “point” source at fluxes as high as 9300 W/m2. Cooling is provided by a Gifford-McMahon cryocooler capable of 25 W of cooling power at 20 K, with a base temperature of 14 K. A commercially available Xeon lamp acts as the solar source, creating broadband electromagnetic radiation with a spectrum similar to that of the Sun. Light is beamed through the vacuum chamber and onto a sample suspended within the cold-mass via a flexible quartz fiber bundle in conjunction with a custom vacuum feedthrough. The system design, fabrication, and operation are discussed; and results from the initial checkout testing of the system are presented.

A. M. Swanger↗

In Situ Biological Contamination Studies of the Moon: Implications for Planetary Protection and Life Detection Missions

NASA and ESA have outlined visions for solar system exploration that will include a series of lunar robotic precursor missions to prepare for, and support a human return to the Moan, and future human exploration of Mars and other destinations, including possibly asteroids. One of the guiding principles for exploration is to pursue compelling scientific questions about the origin and evolution of life. The search for life on objects such as Mars will require careful operations, and that all systems be sufficiently cleaned and sterilized prior to launch to ensure that the scientific integrity of extraterrestrial samples is not jeopardized by terrestrial organic contamination. Under the Committee on Space Research's (COSPAR's) current planetary protection policy for the Moon, no sterilization procedures are required for outbound lunar spacecraft, nor is there a different planetary protection category for human missions, although preliminary C SPAR policy guidelines for human missions to Mars have been developed. Future in situ investigations of a variety of locations on the Moon by highly sensitive instruments designed to search for biologically derived organic compounds would help assess the contamination of the Moon by lunar spacecraft. These studies could also provide valuable "ground truth" data for Mars sample return missions and help define planetary protection requirements for future Mars bound spacecraft carrying life detection experiments. In addition, studies of the impact of terrestrial contamination of the lunar surface by the Apollo astronauts could provide valuable data to help refine future: Mars surface exploration plans for a human mission to Mars.

Glavin, Daniel P.↗

Systematic Independent Validation of Inner Heliospheric Models

This presentation is the first in a series which will provide independent validation of community models of the outer corona and inner heliosphere. In this work we establish a set of measures to be used in validating this group of models. We use these procedures to generate a comprehensive set of results from the Wang- Sheeley-Arge (WSA) model which will be used as a baseline, or reference, against which to compare all other models. We also run a test of the validation procedures by applying them to a small set of results produced by the ENLIL Magnetohydrodynamic (MHD) model. In future presentations we will validate other models currently hosted by the Community Coordinated Modeling Center(CCMC), including a comprehensive validation of the ENLIL model. The Wang-Sheeley-Arge (WSA) model is widely used to model the Solar wind, and is used by a number of agencies to predict Solar wind conditions at Earth as much as four days into the future. Because it is so important to both the research and space weather forecasting communities, it is essential that its performance be measured systematically, and independently. In this paper we offer just such an independent and systematic validation. We report skill scores for the model's predictions of wind speed and IMF polarity for a large set of Carrington rotations. The model was run in all its routinely used configurations. It ingests line of sight magnetograms. For this study we generated model results for monthly magnetograms from the National Solar Observatory (SOLIS), Mount Wilson Observatory and the GONG network, spanning the Carrington rotation range from 1650 to 2068. We compare the influence of the different magnetogram sources, performance at quiet and active times, and estimate the effect of different empirical wind speed tunings. We also consider the ability of the WSA model to identify sharp transitions in wind speed from slow to fast wind. These results will serve as a baseline against which to compare future versions of the model

MacNeice, P. J.↗

Solar White Thermal Coating for Cryogenic Propulsion Systems

NASA is currently conducting research into the potential of storing cryogenic fluid in low Earth orbit (LEO). Having cryogenic propellant readily available for high-performance propulsion systems can be very beneficial for deep space missions in the near future. One of the key challenges to storing cryogenic fluid in LEO is minimizing boil-off. To address the challenge, NASA is evaluating new concepts in thermal insulation. One recent experimental study evaluated the feasibility of using Yttrium Oxide (Y2O3), formed into tiles or spray coating that can potentially be used as a thermal coating for cryogenic propellant storage applications in deep space. Due to its temperature and wavelength dependent optical properties, this “solar white” material can reflect a vast majority of the Sun’s radiative energy while having a very high infrared emissivity for rejecting heat to deep space. As a part of the material development and proof of concept testing, multiple tests have been run at KSC and GRC to demonstrate the performance of the material. At GRC, the tests were run using the Deep Space Solar Simulator (DS3) which contains a thermal vacuum chamber in which the solar white sample was exposed to a deep space environment (< 10 K, optically dense walls) while under full illumination via solar lamp. In order to improve the use of the test results and apply them to spacecraft, there is a need to be able to model the material properties within NASA’s standard thermal modeling tools. As such, it was set out to verify a thermal model of one of the experiments using Thermal Desktop with Sinda. The thermal model of the DS3 test setup includes the solar white sample along with a solar lamp simulator capable of outputting heat at varying wavelengths. The model was developed in order to validate the test results and also to help predict results that will be obtained in future tests. This paper will review the modeling methods and thermal analysis results for various test cases that were run within the DS3 facility.

Cryogenic↗

The Goddard program of gamma ray transient astronomy

Gamma ray burst studies are reviewed. The past results, present status and future expectations are outlined regarding endeavors using experiments on balloons, IMP-6 and -7, OGO-3, ISEE-1 and -3, Helios-2, Solar Maximum Mission, the Einstein Observatory, Solar Polar and the Gamma Ray Observatory, and with the interplanetary gamma ray burst networks, to which some of these spacecraft sensors contribute. Additional emphasis is given to the recent discovery of a new type of gamma ray transient, detected on 1979 March 5.

Cline, T. L.↗

Development of an Ultraflex-Based Thin Film Solar Array for Space Applications

As flexible thin film photovoltaic (FTFPV) cell technology is developed for space applications, integration into a viable solar array structure that optimizes the attributes of this cell technology is critical. An advanced version of ABLE'sS UltraFlex solar array platform represents a near-term, low-risk approach to demonstrating outstanding array performance with the implementation of FTFPV technology. Recent studies indicate that an advanced UltraFlex solar array populated with 15% efficient thin film cells can achieve over 200 W/kg EOL. An overview on the status of hardware development and the future potential of this technology is presented.

White, Steve↗

Future NASA plans for exobiology and solar system exploration

The prominence of exobiology as a part of the NASA program in solar system exploration reached its peak during the Viking missions of the mid-1970's. Even before those missions were finished, the Exobiology Program had been transferred out of the Division responsible for solar system exploration, and many of the direct ties to future missions became more difficult to make, providing a bureaucratic impediment to the conduct of exobiology research in space. Early in 1993, the Exobiology Program was brought back in to the Solar System Exploration Division, as an integral part of NASA's program to study this and other solar systems. As such, the Program stands to gain from an overall broad investment in missions that will study Mars, small bodies such as asteroids and comets, and outer planetary bodies such as Saturn, Titan, and even Pluto. Additional opportunities may be forthcoming on the Moon and elsewhere in Earth-orbit. Ground-based studies will continue to be an important foundation for work in space, while additional effects will be continue to use ground-based astronomical instruments to study other planetary systems, and to search for life on planets around other stars. This paper provides a current planning and budgetary prospectus on the future of Exobiology in NASA.

Rummel, John D.↗

Unifying the Validation of Ambient Solar Wind Models

Progress in space weather research and awareness needs community-wide strategies and procedures to evaluate our modeling assets. Here we present the activities of the Ambient Solar Wind Validation Team embedded in the COSPAR ISWAT initiative. We aim to bridge the gap between model developers and end-users to provide the community with an assessment of the state-of-the-art in solar wind forecasting. To this end, we develop an open online platform for validating solar wind models by comparing their solutions with in situ spacecraft measurements. The online platform will allow the space weather community to test the quality of state-of-the-art solar wind models with unified metrics providing an unbiased assessment of progress over time. In this study, we propose a metadata architecture and recommend community-wide forecasting goals and validation metrics. We conclude with a status update of the online platform and outline future perspectives.

Space weather↗