Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Superconducting properties of Pb-Sn-In alloys directionally solidified aboard Skylab

Superconducting alloys of Pb-Sn-In were directionally solidified in the absence of gravity-induced convection and segregation by processing in a near weightless condition aboard Skylab. Lead-rich and tin-rich lamellar structures were obtained with both high and low G/R (temperature gradient/solidification rate) samples processed at 0-g and at 1-g in a ground-based laboratory. Thinner, higher density lamellae were found with the 0-g specimens. Magnetization curves at 4.2 K showed hysteresis effects with large areas under the curves indicating magnetic flux pinning by the normal state tin-rich phase.

Anderson, W. T., Jr.↗
NASA NTRS1977

Laser operation by dissociation of metal complexes. II - New transitions in Cd, Fe, Ni, Se, Sn, Te, V, and Zn

The reported investigation is a continuation of a study conducted by Chou and Cool (1976). The experimental results discussed are partly related to laser transitions in Cd(I), Cd(II), and Zn(II). Laser transitions in Fe(I), Ni(I), Sn(I), Te(I), and V(I) are also considered along with the observation of a laser pulse with two peaks in connection with the study of laser transitions in Se(I). Experiments related to prospective visible laser operation in thallium at 6550 and 6714 are also discussed, giving attention to spontaneous emission measurements at 6550 and 5350 A, the effects of additive molecules, and laser cavity experiments at 6550 and 6714 A.

Chou, M. S.↗
NASA NTRS1977

Compositional variations in the undercooled Pb-Sn eutectic solidified at various acceleration levels

Ingots of Pb-61.9 Sn were undercooled and solidified under increasing gravity levels in order to investigate the effects of segregation. The onset of convective flow subsequent to the nucleation of lead is demonstrated. It is shown that when material system in the molten state contains constituents of varying densities, the combination of gravitational forces on the nucleating species and the amount of undercooling of the melt will determine the resultant segregation.

Johnston, M. H.↗
NASA NTRS1977

The influence of composition, annealing treatment, and texture on the fracture toughness of Ti-5Al-2.5Sn plate at cryogenic temperatures

The plane strain fracture toughness K sub Ic and conventional tensile properties of two commercially produced one-inch thick Ti-5Al-2.5Sn plates were determined at cryogenic temperatures. One plate was extra-low interstitial (ELI) grade, the other normal interstitial. Portions of each plate were mill annealed at 1088 K (1500 F) followed by either air cooling or furnace cooling. The tensile properties, flow curves, and K sub Ic of these plates were determined at 295 K (room temperature), 77 K (liquid nitrogen temperature), and 20 K (liquid hydrogen temperature).

Vanstone, R. H.↗
NASA NTRS1978

Optical emission from a fast shock wave - The remnants of Tycho's supernova and SN 1006

The faint optical filaments in Tycho's supernova remnant appear to be emission from a shock front moving at 5600 km/s. The intensity of the hydrogen lines, the absence of forbidden lines of heavy elements in the spectrum, and the width of the filaments are explained by a model in which a collisionless shock wave is moving into partially neutral gas. The presence of the neutral gas can be used to set an upper limit of approximately 5 x 10 to the 47th power ergs to the energy in ionizing radiation emitted by a Type I supernova. The patchy neutral gas is probably part of the warm neutral component of the interstellar medium. The existing information on the remnant of SN 1006 indicates that its emission is similar in nature to that from Tycho's remnant.

Chevalier, R. A.↗
NASA NTRS1979

Soft X-ray emission from the Lupus Loop and Sn 1006 supernova remnants

X-ray maps of the Lupus region have been obtained in a raster scan observation from SAS 3. These show the Lupus Loop to be a faint extended source of soft X-rays with a temperature about 2.5 million K. The most prominent feature of the region is the A.D. 1006 supernova remnant, which is unexpectedly bright at 0.2-1.0 keV. One speculative interpretation of the low-energy flux from SN 1006 is as blackbody radiation from a hot neutron star.

Winkler, P. F., Jr.↗
NASA NTRS1981

An X-ray map of SN 1006 from the Einstein Observatory

An X-ray map of the SN 1006 supernova remnant acquired by the imaging proportional counter of the Einstein Observatory in the energy range 0.1-4 keV is presented. The image obtained from the imaging proportional counter shows a limb-brightened nebula, almost circular in outline with enhanced emission in two quadrants. The hardness ratio map reveals a large range of temperatures over the object, with the highest values near the limbs of the enhanced emission regions. Consideration of a three-dimensional model of the object indicates the presence of a shell of electron temperature varying between 10 to the 6th and 10 to the 7th K and density varying between 0.3 and 6/cu cm surrounding a fairly uniform interior, of electron temperature 1.5 x 10 to the 6th K and density 1.0/cu cm. The optical filaments are observed to lie parallel with the faintest edge of the X-ray shell, about 1 arcmin from the peak of X-ray emission. Mass visible in the X-ray image of 5-15 solar masses suggests that the supernova may have been of type II. No evidence is obtained for a hot stellar remnant.

Pye, J. P.↗
NASA NTRS1982

The effects of weld-repair and hot isostatic pressing on the fracture properties of Ti-5Al-2.5Sn ELI castings

The Ti-5Al-2.5Sn extremely low interstitial alloy employed in the large castings which form the critical attachment fittings of the Space Shuttle External Tank was selected because of its high fracture resistance at cryogenic temperatures. Casting was selected over alternative fabrication methods because of its lower cost and adaptability to design changes, although it was found necessary to weld-repair surface and subsurface casting defects in order to reduce the scrap rate and maintain the inherent cost advantage of the castings. Hot Isostatic Pressing was experimentally found to heal the surface and internal defects of the castings, but did not improve tensile or fracture properties and was therefore rejected as a production technique. Production castings are instead weld-repaired, without any mechanical property degradation.

Misra, M. S.↗
NASA NTRS1983

The probable association of SN 1957d in NGC 5236 (M83) with an unresolved radio source

Astrometric measurements of the position of SN 1957d in the spiral galaxy NGC 5236 using archival plates indicate that it is within 2 arcsec of the position of a point radio source of approximately Cas A strength on a VLA map made by Cowan and Branch (1982). This coincidence strongly suggests that the radio source originated from the supernova. If further investigation shows this point source to indeed be a supernova remnant, then this would be the first reported detection of an intermediate-age supernova remnant.

Pennington, R. L.↗
NASA NTRS1984

An X-ray study of the remnant of SN 185 A.D.

High-resolution X-ray maps obtained with the Einstein Observatory of the supernova remnant RCW 86 are presented. Analysis of the spatial and spectral properties of the remnant yield a total X-ray emitting mass of not greater than about 5 solar masses and a surrounding mean interstellar density of about 0.3/cu cm. A revision of the generally accepted distance of 2.5 kpc downward to not greater than about 1 kpc is strongly suggested by the data. The diameter (about 13 pc) and X-ray plasma temperature (about 1 keV) are consistent with the identification of the remnant with the supernova of 185 A.D. The observed apparent magnitude of SN 185 coupled with the new distance, the implied explosion energy and ejected mass derived from a Sedov analysis, and the lack of any compact remnant are all characteristic of a Type I event.

Pisarski, R. L.↗
NASA NTRS1983

Optimization studies for the growth of Pb(1-x)Sn(x)Te in space

A study of the effects of convection on the quality of crystals grown by the Bridgman technique has been initiated. This study is to provide a basis for the utilization of the low-gravity environment furnished by the Space Shuttle in the development of crystals with a better quality than obtainable under terrestrial conditions. A series of ground-based studies has been started with the objective to optimize the results of Shuttle experiments. A description is presented of preliminary results of some of these studies. Attention is given to a thermo-solutal convection analysis, the development of a technique for interface demarcation, the growth of Pb(1-x)Sn(x)Te crystals, thermophysical property measurements, and solutal diffusion coefficients.

Crouch, R. K.↗
NASA NTRS1983

Development of ion-implantation confined, shallow mesa stripe (Pn,Sn)Te/Pb(Te,Se) DH laser diodes

Preliminary results of a program to develop ion implantation confined, shallow mesa stripe (Pb,Sn)Te laser diodes are presented. The practicality of using a shallow mesa stripe to produce single mode laser output and to increase the single mode tuning range are demonstrated. The first results of p-type ion implantation in the lead-tin salts are also reported. It is shown that sodium and lithium both can be used to convert n-type Pb(Te,Se) to p-type. The implant and anneal procedures are described, and electrical characteristics of Li-implanted layers are presented.

Fonstad, C. G.↗
NASA NTRS1983

Cosmic-ray abundances of the even charge elements from Sn-50 to Ce-58 measured on HEAO-3

Elements with even atomic number (Z) in the interval Z = 50-58 have been resolved in the cosmic radiation using the Heavy Nuclei Experiment on the HEAO-3 satellite. The observation that Sn-50 and Ba-56 are more abundant than Te-52 and Xe-54 indicates a substantial s-process contribution to the cosmic ray source. A significant abundance of Ce-58 provides further support for this finding.

Stone, E. C.↗
NASA NTRS1985

Moessbauer studies on LaNi(4.7)Sn(0.3) and its hydride

Moessbauer measurements were made on LaNi(4.7)Sn(0.3) at room and liquid nitrogen temperatures. Experimental data yielded a singlet at room temperature and a doublet at liquid-nitrogen temperature. Spectra of the hydrided sample yielded a doublet at liquid-nitrogen temperature with an increase in the quadrupole splitting compared to the unhydrided spectra, but no change in the isomer shift. These data indicate that there is no significant interaction between the tin and the hydrogen. The magnetic character remained the same down to liquid-nitrogen temperature as evidenced by the Moessbauer data. X-ray diffraction measurements on the hydride showed an expanded lattice with the same structure as found for the unhydrided sample. A decrease in particle size was observed upon hydriding.

Oliver, F. W.↗
NASA NTRS1985

Effect of low temperature on fatigue and fracture properties of Ti-5Al-2.5Sn(ELI) for use in engine components

Experiments were conducted to evaluate the characteristics of the Ti-5Al-2.5Sn (ELI) alloy used in a fuel pump impeller at cryogenic temperatures. Tension, fracture toughness, and fatigue crack propagation data were collected determining the effect of frequency and load ratio on crack propagation. The results revealed that tensile strength increased significantly at 20 K compared to room temperature and fracture toughness was reduced at cryogenic temperatures. The fatigue crack growth rate was not sensitive to experimental conditions and there were only minimal crack orientation effects. Different frequencies produced no effect. At various temperatures and frequencies a load ratio increase resulted in higher crack growth rates. At low stress intensity levels the fatigue rate for both temperatures was the same; however, at high stress intensity levels the crack growth rate at 20 K increased because of the decrease in fracture toughness. The results correlated well with previous data.

Ryder, J. T.↗
NASA NTRS1986

SN 1985f - Death of a Wolf-Rayet star

The optical spectrum of SN 1985f has been analyzed, and the supernova ejecta is shown to contain approximately 5 or more solar masses of oxygen and very little hydrogen. It is suggested that the explosion resulted from the pair instability supernova of a WO Wolf-Rayet star of about 50 solar masses, and that the optical luminosity of the supernova is powered by the radioactive decay of Co-56 synthesized in the explosion. As calculated from the rate of the optical emission decay, the explosion occurred about 350 days before its discovery in February, 1985. It is believed that some of the oxygen-rich supernova remnants may also have been produced by explosions of WO stars.

Begelman, M. C.↗
NASA NTRS1986

Electrical properties of Al-In-Sn alloys directionally solidified in high and low gravitational fields

The Al-In-Sn alloys were directionally solidified in the NASA KC-135 aircraft which flies a series of parabolas to generate high (high-g) and low (low-g) gravity forces parallel to the longitudinal growth axis. Thus, for a given sample, successive sections can be identified which were solidified in high-g and low-g. Measurements of the electronic properties of the samples reveal that: the resistivity of the low-g sections is larger (about a factor of 10) than that of the high-g sections; the low-g sections behave conductively like a semi-metal, while the high-g sections are essentially metallic; and both high-g and low-g sections are superconducting but the superconducting transition temperature of the low-g sections is 1 K higher than that of the high-g sections.

Curreri, P. A.↗
NASA NTRS1986

Gravitational macrosegregation in binary Pb-Sn alloy ingots

A space shuttle experiment employing the General Purpose (Rocket) Furnace (GPF) in its isothermal mode of operation is manifested on MSL-3, circa 1989. The central aim of this experiment is to investigate the effect of reduced gravity levels on the segregation behavior in a slowly, and isothermally, cooled sample of a binary Pb-15 wt% Sn alloy. This experiment should be able to simulate, in a small laboratory sample, some aspects of the segragation phenomena occurring in large industrial ingots. Ground-based experiments conducted in the single-cavity simulator of the GPF, in support of the microgravity experiment are described in detail. The results of the MSFC experiments are compared with other related experiments conducted at Case Western Reserve University (CWRS), wherein the isothermal constraints were relaxed. The isothermally processed samples indicate a small and gradual increase in fraction eutectic, and a corresponding increase in tin content, from the bottom to the top of the ingot. The radial variations are minimal near the ingot bottom, but there are large radial variations in the top half. In the CWRU experiments, more severe segregations, including segregation defects known as freckles. Follow up experiments employing the GPF without the isothermal constraints, or other suitably modified space shuttle hardware are suggested.

Laxmanan, V.↗