Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation Fidelity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

A variance deconvolution estimator for efficient uncertainty quantification in Monte Carlo radiation transport applications

Monte Carlo simulations are at the heart of many high-fidelity simulations and analyses for radiation transport systems. As is the case with any complex computational model, it is important to propagate sources of input uncertainty and characterize how they affect model output. Unfortunately, uncertainty quantification (UQ) is made difficult by the stochastic variability that Monte Carlo transport solvers introduce. The standard method to avoid corrupting the UQ statistics with the transport solver noise is to increase the number of particle histories, resulting in very high computational costs. In this contribution, we propose and analyze a sampling estimator based on the law of total variance to compute UQ variance even in the presence of residual noise from Monte Carlo transport calculations. Here, we rigorously derive the statistical properties of the new variance estimator, compare its performance to that of the standard method, and demonstrate its use on neutral particle transport model problems involving both attenuation and scattering physics. We illustrate, both analytically and numerically, the estimator’s statistical performance as a function of available computational budget and the distribution of that budget between UQ samples and particle histories. We show analytically and corroborate numerically that the new estimator is unbiased, unlike the standard approach, and is more accurate and precise than the standard estimator for the same computational budget.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cost-constrained adaptive simulations of transient spray combustion in a gas turbine combustor

Predictive high-fidelity simulations of turbulent spray combustion must capture the combined effects of complex chemistry, multiphase evaporating flow and spray-flame interactions to achieve physical accuracy. Finite-rate chemistry (FRC) combined with a realistic chemical mechanism is a combustion model well-suited for this purpose, but has a high computational cost due to the large number and stiffness of transported chemical species. In contrast, flamelet-based models achieve lower cost by transporting a small number of quantities of reduced stiffness, but assumptions regarding local flame topology, boundary conditions and inter-phase coupling limit their physical accuracy. Recently, the Pareto-efficient combustion (PEC) framework was developed to dynamically assign combustion models based on local cost and accuracy metrics in gas-phase reacting flows. In this work, we extend this PEC framework to spray combustion through the rigorous analysis of the multiphase coupling terms in the governing equations. The derivation shows that spray evaporation causes errors in the prediction of species mass fractions for flamelet-based models due to the sensitivity of the local thermo-chemical state to changes in composition caused by fuel vaporization across combustion regimes present in practical spray combustion devices. Sub-model assignment is formulated as a multiple-choice knapsack problem, where computational cost is directly controlled through the fraction of the domain assigned to the FRC sub-model. The extended PEC formulation is applied to the simulation of a realistic rich-quench-lean gas turbine combustor at steady-state conditions, as well as transient operation resulting in lean blow-out (LBO). Analysis of transient simulations during LBO demonstrates the extended PEC formulation’s capacity to dynamically adapt to changing conditions within the combustor. Transient combustor dynamics are shown to approach convergence with limited increases in computational cost, while retaining substantial computational cost reduction compared to monolithic FRC simulations. Through PEC simulations with increasing fractions of the domain assigned to FRC, monolithic flamelet simulations are shown to over-predict flame stability during LBO. Finally, the extended PEC formulation is thus shown to overcome deficiencies of monolithic models by controlling modeling error for multiphase combustion modeling.

33 ADVANCED PROPULSION SYSTEMS↗

Large Eddy Simulation of Random Pebble Bed Using the Spectral Element Method

The high-fidelity simulations are performed with Nek5000/NekRS to show the importance of various phenomena associated with fluid flow and heat transfer through pebble beds. As a result of this work, Kairos Power and NEAMS have a better understanding of the behavior of pebble bed geometries. Kairos Power will leverage the data generated and conclusions reached as part of this investigation to help accelerate the deployment of their reactor design.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

High Fidelity BWR Fuel Simulations

This report describes the Consortium for Advanced Simulation of Light Water Reactors (CASL) work conducted for completion of the Thermal Hydraulics Methods (THM) Level 3 milestone THM.CFD.P13.03: High Fidelity BWR Fuel Simulation. High fidelity computational fluid dynamics (CFD) simulation for Boiling Water Reactor (BWR) was conducted to investigate the applicability and robustness performance of BWR closures. As a preliminary study, a CFD model with simplified Ferrule spacer grid geometry of NUPEC BWR Full-size Fine-mesh Bundle Test (BFBT) benchmark has been implemented. Performance of multiphase segregated solver with baseline boiling closures has been evaluated. Although the mean values of void fraction and exit quality of CFD result for BFBT case 4101-61 agreed with experimental data, the local void distribution was not predicted accurately. The mesh quality was one of the critical factors to obtain converged result. The stability and robustness of the simulation was mainly affected by the mesh quality, combination of BWR closure models. In addition, the CFD modeling of fully-detailed spacer grid geometry with mixing vane is necessary for improving the accuracy of CFD simulation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High-fidelity forced convection simulations of the University of Wisconsin–Madison air-cooled reactor cavity cooling system

Among the various types of advanced nuclear technologies that exist, high-temperature gas-cooled reactors (HTGRs) stand out for their co-generation capabilities and exceptional passive safety systems. HTGRs rely on a reactor cavity cooling system (RCCS) to remove decay heat from the reactor pressure vessel (RPV) during the course of long-term transients. Several studies have focused on experimental and numerical modeling of the RCCS; however, the literature reveals a notable gap when it comes to high-fidelity simulations such as direct numerical simulations (DNS) or large eddy simulation (LES) models of the RCCS. An LES model was developed for forced convection inside the RCCS so as to obtain a high-fidelity representation of the RCCS at a scale never before attempted. Furthermore, the LES model was compared against three different Reynolds-averaged Navier–Stokes (RANS) models (Realizable k − ϵ, k − ω SST, and Reynolds stress model [RSM]). This comparison verified the robustness and accuracy of the turbulence modeling approach of the RANS models for the RCCS. Finally, based on the comparison between the LES and the RANS models, the k − ω SST RANS model of the experimental facility was developed and compared against the available experimental data.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Towards improved speed and accuracy of laser powder bed fusion simulations via multiscale spatial representations

Due to the growing popularity of laser powder bed fusion (LPBF) as a metal additive manufacturing technique, there is a strong need to be able to accurately predict build outcomes. Full fidelity simulations of this process are not feasible due to the vast range of length and time scales inherent to it. While part-scale codes for simulating residual stress and distortion have shown reasonable predictive capability, they often neglect many aspects of the process occurring over smaller length/time scales, and thus are unable to capture effects of process parameter adjustments or the behavior of fine features. One way of capturing aspects at more refined length scales is through the use of adaptive mesh refinement (AMR). AMR allows for the process to be simulated at scales approaching the physical spatial dimensions without drastically increasing the total degrees of freedom in the simulation. This manuscript describes the implementation of an AMR algorithm within a multiphysics, parallelized finite element code, and its application to the LPBF problem. In this work, part-scale examples are provided where the use of AMR has allowed for higher fidelity thermal and thermomechanical simulations, as compared to experimental measurements. Results from these higher resolution simulations show that while AMR is a necessary component for increased accuracy in a computationally efficient manner, other improvements are also necessary, including handling of the multiple time scales inherent to the problem and the need for improved AM-specific material models.

42 ENGINEERING↗

Evaluation of WRF simulation of deep convection in the US Southern Great Plains

The Southern Great Plains (SGP) exhibits a relatively high frequency of periods with extremely high rainfall rates (RR) and hail. Here, seven months of 2017 are simulated using the Weather Research and Forecasting (WRF) model applied at convection permitting resolution with the Mibrandt-Yau microphysics scheme. Simulation fidelity is evaluated, particularly during intense convective events, using data from ASOS stations, dual-polarization RADAR, gridded data sets and observations at the DoE Atmospheric Radiation Measurement site. The spatial gradients and temporal variability of precipitation and the cumulative density functions for both RR and wind speeds exhibit fidelity. Odds ratios >1 indicate WRF is also skillful in simulating high composite reflectivity (cREF, used as a measure of widespread convection) and RR > 5 mmhr –1 over the domain. Detailed analyses of the ten days with highest spatial coverage of cREF >30 dBZ show spatially similar reflectivity fields and high RR in both RADAR data and WRF simulations. However, during periods of high reflectivity, WRF exhibits a positive bias in terms of very high RR (> 25 mmhr –1 ) and hail occurrence, and during the summer and transition months, maximum hail size is underestimated. For some renewable energy applications fidelity is required with respect to the joint probabilities of wind speed and RR and/or hail. While partial fidelity is achieved for the marginal probabilities, performance during events of critical importance to these energy applications is currently not sufficient. Further research into optimal WRF configurations in support of potential damage quantification for these applications is warranted.

54 ENVIRONMENTAL SCIENCES↗

Campaign 2 Level 2 Milestone Review 2009: Milestone # 3131 Grain Scale Simulation of Pore Collapse

The milestone reviewed on Sept. 16, 2009 was 'High-fidelity simulation of shock initiation of high explosives at the grain scale using coupled hydrodynamics, thermal transport and chemistry'. It is the opinion of the committee that the team has satisfied the milestone. A detailed description of how the goals were met is provided. The milestone leveraged capabilities from ASC Physics and Engineering Materials program combined with experimental input from Campaign 2. A combined experimental-multiscale simulation approach was used to create and validate the various TATB model components. At the lowest length scale, quantum chemical calculations were used to determine equations of state, thermal transport properties and reaction rates for TATB as it is decomposing. High-pressure experiments conducted in diamond anvil cells, gas guns and the Z machine were used to validate the EOS, thermal conductivity, specific heat and predictions of water formation. The predicted reaction networks and chemical kinetic equations were implemented in Cheetah and validated against the lower length scale data. Cheetah was then used within the ASC code ALE3D for high-resolution, thermo-mechanically coupled simulations of pore collapse at the micron size scale to predict conditions for detonation initiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Secondary-Source Core Reload Modeling with VERA

The CASL reactor simulation package VERA has been adapted to provide high-fidelity simulation capabilities for modeling source range detector response during subcritical reactor configurations. New features include the activation and shuffling of secondary-source assemblies, use of burned fuel neutron emission data from the ORIGEN depletion solver to the MPACT deterministic neutron transport solver, allowance of user-defined sources in MPACT based on material composition, ability to solve the subcritical source-driven system with neutron multiplication using the MPACT diffusion solver, and transfer of the calculated fission source from MPACT to the continuous-energy Monte Carlo solver Shift for final detector response evaluation using the CADIS methodology for variance reduction. These new capabilities were benchmarked against Watts Bar Unit 1 plant operating data for the first few fuel loading steps and were found to demonstrate excellent agreement with the measured data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Source Range Detector Response Modeling using VERA

The CASL reactor simulation package VERA has been adapted to provide high-fidelity simulation capabilities for modeling source range detector response during subcritical reactor configurations. New features include the activation and shuffling of secondary source assemblies, transfer of burned fuel neutron emission data from the ORIGEN depletion solver to the MPACT deterministic neutron transport solver, allowance of user-defined sources in MPACT based on material composition, ability to solve the subcritical source-driven system with neutron multiplication using the MPACT diffusion solver, and transfer of the calculated fission source from MPACT to the continuous energy Monte Carlo solver Shift for final detector response evaluation. These new capabilities were benchmarked against Watts Bar Unit 1 plant operating data and found to be in very good agreement.

Gentry, Cole↗

Assessing pellet-clad interaction with VERA: WBN1, cycles 6-7

The Consortium for Advanced Simulation of Light Water Reactors (CASL) aims to provide high fidelity simulations of nuclear reactors through the development of the Virtual Environment for Reactor Applications (VERA). One of the primary goals of CASL is to estimate local cladding failure through pellet-clad interaction (PCI). While this capability is being pursued through several different approaches, the procedure presented here focuses on running independent fuel performance calculations with the BISON fuel performance code being developed by Idaho National Laboratory using the multicycle output data from coupled neutron transport/thermal-hydraulics simulations generated by MPACT, CTF, and MAMBA. This type of approach is consistent with traditional fuel performance analysis methods, where the fuel performance analyses are typically separate from core simulation analyses. Recent work simulating 12 cycles of Watts Bar Unit 1 (WBN1) with VERA are capitalized upon, and stand-alone quarter-core BISON results can be obtained for several cycles, assessing parameters of interest to PCI (e.g., maximum centerline fuel temperature, maximum clad hoop stress, minimum gap thickness, and cumulative damage index). This is accomplished by using the coupled neutronics/thermal-hydraulics output power and temperature distributions as inputs for each BISON fuel rod case. Building on previous work which demonstrated this capability for Cycles 1 through 3, this paper presents the results for Cycles 6 and 7. Cycle 7 is of particular interest because significant CRUD-induced power shift was observed. While the current results do not immediately indicate that any rods are at an extreme risk of failure, further analysis on rods highlighted by this work may shed additional light on the likelihood of failure. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multifidelity Neural Network Formulations for Prediction of Reactive Molecular Potential Energy Surfaces

Here, this paper focuses on the development of multifidelity modeling approaches using neural network surrogates, where training data arising from multiple model forms and resolutions are integrated to predict high-fidelity response quantities of interest at lower cost. We focus on the context of quantum chemistry and the integration of information from multiple levels of theory. Important foundations include the use of symmetry function-based atomic energy vector constructions as feature vectors for representing structures across families of molecules and single-fidelity neural network training capabilities that learn the relationships needed to map feature vectors to potential energy predictions. These foundations are embedded within several multifidelity topologies that decompose the high-fidelity mapping into model-based components, including sequential formulations that admit a general nonlinear mapping across fidelities and discrepancy-based formulations that presume an additive decomposition. Methodologies are first explored and demonstrated on a pair of simple analytical test problems and then deployed for potential energy prediction for C 5 H 5 using B2PLYP-D3/6-311++G(d,p) for high-fidelity simulation data and Hartree–Fock 6-31G for low-fidelity data. For the common case of limited access to high-fidelity data, our computational results demonstrate that multifidelity neural network potential energy surface constructions achieve roughly an order of magnitude improvement, either in terms of test error reduction for equivalent total simulation cost or reduction in total cost for equivalent error.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Fast and Accurate Reduced-Order Model for High-Intensity Transferred Arc Discharges

Arc discharges are widely used in welding, plasma smelting, and other industrial processes, where variations in operating conditions strongly affect arc stability, temperature distribution, and energy transfer. Accurate modeling of these phenomena typically requires computationally expensive high-fidelity simulations. This study presents a hierarchy of three arc discharge models with progressively reduced physical fidelity. The high-fidelity model provides a fully physics-resolved reference, the reduced-order model reproduces the dominant thermal and flow characteristics of the arc with reasonable accuracy, and the Elenbaas-Heller model captures key trends in a simplified, rapid formulation. This hierarchy demonstrates that reduced-order model can effectively balance predictive fidelity and computational efficiency, providing practical tools for arc simulation and parametric studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

One-Dimensional Multi-Velocity Capabilities for Arbitrary Lagrangian-Eulerian Normal Contact Mechanics

Lagrangian and Arbitrary Lagrangian Eulerian (ALE) hydrodynamics codes such as FLAG form the backbone of many mission-critical multi physics simulations at Los Alamos National Laboratory. Critical to pre forming high fidelity simulations with these codes are Lagrangian and ALE contact algorithms, which allow materials to collide, slide, and sep arate throughout a simulation.

97 MATHEMATICS AND COMPUTING↗

Frequency Domain Reflectometry (FDR) Simulation Techniques for Digital Twin Representation of an Electrical Cable

Simulation of cable system response to frequency domain reflectometry (FDR) tests can be instrumental to understanding these tests and the nature and influence of various cable anomalies on test signatures. Reflectometry simulations are based upon a finite element representation of cable conductors and insulation to produce an S-parameter at each evaluated frequency. The aggregate collection of cable model S-parameters can simulate the influence on a test signal injected into a physical cable. Such an approach was undertaken in this work to produce a digital twin simulation of a low-voltage electrical cable. The electrical cable digital twin examined the influence of test simulation parameters and the relative influence of cable anomalies, including thermal aging, water or moisture exposure, water or moisture ingress, and other anomalies. The digital twin in this work included modeling of the conductors, insulation, jacket, and surrounding environment (air, water, etc.). The digital twin could be expanded to include cable bends, junctions and splices, branch or T systems, and termination impedances of motors or instruments. Observations and conclusions of this work include: 1. Fully 3D digital twin simulation of an electrical cable using an FDR approach is possible. However, there are tradeoffs between simulation fidelity and solution time, which must be balanced to ensure the simulation solves in an adequate amount of time (e.g., less than 20 minutes). Simulation parameters to balance include frequency bandwidth, number of frequencies, mesh density, connection impedance, and permittivity tolerance. 2. The digital twin simulation can explain FDR sensitivity to various cable anomalies, including entry and exit from an oven or water bath. 3. The digital twin simulation FDR response attenuates with distance along the cable and is further affected by the frequency bandwidth, which is similar to that observed with physical measurements. 4. The resolution of the digital twin FDR peaks increased with increasing bandwidth and with increasing number of frequencies, again similar to physical measurements. 5. The presence of multiple anomalies in the digital twin does not substantially attenuate the FDR response to anomalies located beyond the first encountered anomaly and impedance mismatch. 6. Spectral variation of the permittivity did not have a significant effect on the FDR response compared to a fixed nominal value. 7. Extension of the digital twin to 1000 ft still allowed for detection of distal anomalies near the far end of the electrical cable from the instrument connection point. 8. The ARENA test bed facilitates efficient NDE evaluations of well understood cable anomalies with various NDE methods without risking actual plant damage.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MOSCATO Solver Development and Integration Plan

During FY21, we conducted ongoing development work for the MOSCATO (Molten Salt Chemistry and Transport) solver. The code development work primarily consisted of transitioning capabilities from the original version of the solver, which was written in OpenFOAM, into Nek5000. In doing so, a fast, highly parallelizable solver was created that is capable of complex chemistry and corrosion simulations for engineering-scale molten salt systems. The Nek5000 version of MOSCATO is now fully featured and capable of higher-fidelity simulations than were previously possible. Demonstration cases including a thermal convection loop have been simulated to test these new capabilities. Although capable of large-scale simulations, MOSCATO is not well-suited to parametric studies of complete reactor geometries. These types of simulations are instead better handled by reduced-order modeling codes such as ORNL’s Mole code. Reduced-order simulation tools like Mole, however, are dependent on high fidelity correlations to account for complex, coupled three-dimensional phenomena that they do not directly simulate. Tools such as MOSCATO must therefore be used to create these correlations, as suitable empirical relationships are not available for most molten salt systems. Toward that end, we used the Nek-derived version of MOSCATO to create new mass transfer correlations for three relevant cases including tubular, tube bank, and subchannel geometries. These new correlations are more accurate than any existing ones and can be readily integrated into any reduced-order modeling tools that are targeting full-scale MSR simulations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Chapter 6: Modeling and Simulation of Wind-Farm Flows

The subject of this chapter is the modeling and simulation of the flow through full wind farms, also known as wind plants, which are collections of many wind turbines within a region working together to supply power to the grid like any other type of power plant. This topic is interesting and exciting because of the increasing variety of and uses for wind plant flow modeling and simulation. For example, Figure 6.1 shows the computed flow field from a high-fidelity simulation of the Lillgrund offshore wind farm using computational fluid dynamics (CFD) with large-eddy simulation (LES) turbulence modeling and actuator line rotor aerodynamics models. There are many ways to model this type of flow, ranging from very simple models of wind turbine wakes and their interactions that can run in a matter of seconds on a laptop to high-fidelity, turbulence -resolving LES of the atmospheric flow and wakes that require days of use of thousands of cores on a high-performance computing cluster. The uses of wind plant flow simulations are equally varied. Wind plant layout designers run hundreds or thousands of simulations over all possible wind directions and speeds using simple models to predict a future wind plant's annual energy production. Researchers use LESs of the wind plant to study phenomena such as wind turbine wake interactions with each other and with the atmospheric boundary layer (ABL). As computational resources become more readily available, it is even becoming common for turbine manufacturers to use CFD of some form to model wind plants in complex terrain to help in the wind turbine siting and selection process. We are beginning to see the expensive, high-fidelity tools being used to create data and knowledge that improves or enables the creation of new cheaper, lower fidelity tools. We are also beginning to see the low- and high-fidelity tools used together to perform uncertainty quantification of energy estimates and optimization of wind plant layouts. As new computing technologies mature, such as graphics processing unit (GPU)-based computing, the future of full wind plant flow modeling is exciting.

17 WIND ENERGY↗

OC6 Phase Ia: CFD Simulations of the Free-Decay Motion of the DeepCwind Semisubmersible

Currently, the design of floating offshore wind systems is primarily based on mid-fidelity models with empirical drag forces. The tuning of the model coefficients requires data from either experiments or high-fidelity simulations. As part of the OC6 (Offshore Code Comparison Collaboration, Continued, with Correlation, and unCertainty (OC6) is a project under the International Energy Agency Wind Task 30 framework) project, the present investigation explores the latter option. A verification and validation study of computational fluid dynamics (CFD) models of the DeepCwind semisubmersible undergoing free-decay motion is performed. Several institutions provided CFD results for validation against the OC6 experimental campaign. The objective is to evaluate whether the CFD setups of the participants can provide valid estimates of the hydrodynamic damping coefficients needed by mid-fidelity models. The linear and quadratic damping coefficients and the equivalent damping ratio are chosen as metrics for validation. Large numerical uncertainties are estimated for the linear and quadratic damping coefficients; however, the equivalent damping ratios are more consistently predicted with lower uncertainty. Some difference is observed between the experimental and CFD surge-decay motion, which is caused by mechanical damping not considered in the simulations that likely originated from the mooring setup, including a Coulomb-friction-type force. Overall, the simulations and the experiment show reasonable agreement, thus demonstrating the feasibility of using CFD simulations to tune mid-fidelity models.

17 WIND ENERGY↗