Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Saline Formations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Scaling dynamics in low-salt-rejection reverse osmosis for high-salinity produced water desalination: Mechanistic modeling and membrane autopsy

Membrane scaling remains a critical barrier to the reliable operation of desalination systems, particularly for hypersaline produced water (PW) treatment. This study fills the knowledge gap of autopsy-based model validation for PW desalination by elucidating scaling mechanisms in a Low-Salt-Rejection Reverse Osmosis (LSRRO) system through the integration of pilot-scale experimentation and complementary modeling approaches. A semi-empirical modeling framework was developed and applied to a multistage pilot LSRRO system equipped with nanofiltration and RO membranes treating high-salinity PW from the Permian Basin. Water quality analysis showed that total dissolved solids decreased from ~130,000 mg/L to ~1900 mg/L in the permeate, then further reduced to ~300 mg/L by a second-pass RO. Two different thermodynamic modeling approaches were evaluated: the first extends the LSRRO framework by incorporating system complexity and scaling phenomena, whereas the second method explicitly captures concentration polarization in localized supersaturation. Both methods illustrate the tendency for carbonate and sulfate scaling throughout the stages. Membrane autopsies revealed a silica-dominated deposit matrix, localized CaSO 4 at Stage 2, and minor barite/celestite despite their prominence in model predictions. Quantum-chemical calculations indicated silica scaling can be rationalized by favorable adsorption of H 4 SiO 4 on Fe-oxide surfaces (ΔG ≈ −44 kJ/mol), providing a kinetic pathway for interfacial inorganic polymerization even when bulk equilibrium predictions are conservative. Overall, the thermodynamic scaling modeling and membrane autopsy revealed heterogeneous, localized deposits with limited impact on LSRRO performance, while quantum analysis rationalized the thermodynamically unfavorable precipitation formation under bulk equilibrium, reconciling model–autopsy discrepancies. These insights support targeted pretreatment and silica-specific antiscalants to extend membrane lifetime and increase recovery, providing a transferable framework for hypersaline water desalination systems. The combined experimental–computational approach provides new mechanistic insight into scaling in hypersaline membrane systems and establishes a transferable framework for predicting and mitigating scaling in next-generation desalination technologies.

Low-salt-rejection reverse osmosis↗
DOE OSTI2021

CO 2 Storage Site Screening Platform Development and CO 2 Storage Resource Analysis in SECARB Offshore Reservoirs Using SAS Viya

A major goal of the SECARB Offshore Partnership (DE-FE0031557) is to screen deep saline aquifers and hydrocarbon reservoirs in the central Gulf of Mexico for CO 2 sequestration and CO 2 -enhanced oil and gas recovery (EOR/EGR) and estimate the corresponding CO 2 storage resources for select reservoirs. CO 2 storage potential associated with offshore CO 2 -EOR is considerable and likely represents “low hanging fruit” for near-term CO 2 storage given the in-place infrastructure in the region. It is for these reasons that this assessment focuses on oil and gas fields. To this end, three major objectives have been completed and include (1) managing geological data derived from different sources, (2) building a reservoir screening platform for CO 2 storage, and (3) ranking the reservoirs based on the estimated CO 2 storage resources. The SAS ® Viya platform was used for data management and analytics. The Viya platform is a cloud service platform that provides data integration, data management, quick analytics, data visualization, machine learning functions, and application programming interfaces (APIs) for multi-programming languages. Different sources of data containing geologic information, reservoir properties, and EOR/EGR information were collected, cleaned, formatted, and loaded into the SAS ® Viya platform for evaluation. The major geological characteristics of both shelf and deep-water areas of the central Gulf were examined and compared to define the appropriate reservoir screening criteria. Next, a CO 2 storage site screening system was built in the SAS ® Viya platform with the pre-defined criteria. Finally, the CO 2 storage resources of the screened reservoirs were calculated and reported at the BOEM field level to identify fields with the highest estimated CO 2 storage resource. The fields with the largest total estimated CO 2 storage resource are located in the Mississippi Canyon protraction area. Due to proximity to the Mississippi Delta (indicative of less infrastructure) and large estimated CO 2 storage resources, future development activities may wish to focus efforts in the Mississippi Canyon protraction area.

02 PETROLEUM↗
DOE OSTI2020

DOE Award No.: DE-FE0023919 Phase 3 Scientific/Technical Report

This is the Phase 3 Report for the ‘Deepwater Methane Hydrate Characterization and Scientific Assessment or Genesis of Methane Hydrates in the Gulf of Mexico (GOM2)’ research project (DOE Award No. DE-FE0023919). The report summarizes activities from January 16, 2018 to September 30, 2019. The project is led by the University of Texas at Austin (UT). The objective is to gain insight into the nature, formation, occurrence and physical properties of methane hydrate-bearing sediments for the purpose of methane hydrate resource appraisal through the planning and execution of drilling, coring, logging, testing and analytical activities that assess the geologic occurrence, regional context, and characteristics of marine methane hydrate deposits in the Gulf of Mexico outer continental shelf (OCS). We determined that it would not be possible to pursue the project with the International Ocean Discovery Program (IODP) and then developed a revised science and operations plan to maximize the science using a commercial vessel within the budget that is available. We improved the scientific capability of the UT pressure core center by adding the ability to X-ray pressure cores, and the ability to cut and store multiple core samples for experimental analysis. We transferred pressure cores to peer institutions, including the National Energy Technology Lab (NETL) the United States Geological Survey (USGS Woods Hole). We made advances in understanding the composition and source of gasses locked in the methane hydrate from Green Canyon 955 (GC-955). We developed approaches to determine the in-situ salinity of hydrate-bearing samples, revealing that the in situ salinity of the GC 955 reservoir is just above that of seawater. We determined that the GC-955 hydrate reservoir is composed of sandy silt with a high concentration of hydrate interbedded with clayey silt with no hydrate present. We determined that some or all of the intervals bounding the hydrate reservoir are composed of material similar to the reservoir (sandy silt with hydrate and clayey silt with no hydrate), but with a lower net to gross. We determined that the reservoir effective permeability at a hydrate saturation of ~80-90 % is ~0.1 mD (or 1.0×10-16 m2) to ~0.5 mD (or 5.0×10-16 m2) and the intrinsic permeability is ~12 mD (or 1.2×10-14 m2). The GC-955 reservoir in-situ porosity of sandy silt is 0.38 to 0.40 and is largely independent of effective stress, and that the porosity of clayey silt is 0.33 at an in situ effective stress of 3.8 MPa to ~0.37 at zero effective stress. We developed a systematic, repeatable approach to studying hydrate reservoir properties by reconstituting individual lithofacies from dissociated pressure cores. We determined index properties of GC-955 reservoir, including liquid limit and plasticity, porosity, capillary behavior, and particle size distribution. We developed a more robust pressure coring technology. We finalized and published the UT-GOM2-1 Expedition Volume and we finalized a dedicated volume on the UT-GOM2-1 expedition that will be published in the American Association of Petroleum Geologists Bulletin (AAPG) in spring 2020.

03 NATURAL GAS↗
DOE OSTI2023

Thin and transient meltwater layers and false bottoms in the Arctic sea ice pack—Recent insights on these historically overlooked features

The rapid melt of snow and sea ice during the Arctic summer provides a significant source of low-salinity meltwater to the surface ocean on the local scale. The accumulation of this meltwater on, under, and around sea ice floes can result in relatively thin meltwater layers in the upper ocean. Due to the small-scale nature of these upper-ocean features, typically on the order of 1 m thick or less, they are rarely detected by standard methods, but are nevertheless pervasive and critically important in Arctic summer. Observations during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition in summer 2020 focused on the evolution of such layers and made significant advancements in understanding their role in the coupled Arctic system. Here we provide a review of thin meltwater layers in the Arctic, with emphasis on the new findings from MOSAiC. Both prior and recent observational datasets indicate an intermittent yet long-lasting (weeks to months) meltwater layer in the upper ocean on the order of 0.1 m to 1.0 m in thickness, with a large spatial range. The presence of meltwater layers impacts the physical system by reducing bottom ice melt and allowing new ice formation via false bottom growth. Collectively, the meltwater layer and false bottoms reduce atmosphere-ocean exchanges of momentum, energy, and material. The impacts on the coupled Arctic system are far-reaching, including acting as a barrier for nutrient and gas exchange and impacting ecosystem diversity and productivity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The impact of capillary heterogeneity on CO 2 flow and trapping across scales

Capillary heterogeneity has been identified over the last decade as a key control on subsurface CO 2 flow behavior during geological CO 2 sequestration. These heterogeneities can be formed in all sedimentary rocks, ranging from slight variations in the sand grain sizes to extensive sequences of interbedded sands, shales, and limestones. Capillary heterogeneity has been largely, although not entirely, overlooked in subsurface flow modeling because it is assumed to only directly influence fluid redistribution over scales of centimeters to meters. However, even small-scale fluid movements can result in dramatic impacts on the mobility and trapping of the CO 2 over kilometers. Therefore, neglecting capillary heterogeneity at multiple scales could potentially lead to errors in modeling and predicting field-scale plume migration. In this review paper, we aim to provide a consistent overview to (1) establish that capillary heterogeneity can have a major impact on CO 2 plume migration, (2) establish the respective length scales at which capillary heterogeneity matters, and (3) provide guidance for numerical modeling. This review covers pertinent literature and extracts key observations from the core to the field scales. Experimental studies have shown that millimeter-decimeter scale capillary heterogeneity can cause the so-called capillary heterogeneity trapping in addition to pore-scale residual trapping. Even at such a small scale, capillary heterogeneity can already lead to complex upscaled constitutive relationships, such as flow-rate dependent and anisotropic relative permeability, which affects field-scale CO 2 migration even when field-scale heterogeneities are present. Under gravity-dominated flow regimes, centimeter-meter scale capillary heterogeneity can entrap a significant amount of CO 2 at field scale, not just after imbibition but also during drainage. In certain cases, the presence of capillary heterogeneity can even completely stop the vertical movement of the CO 2 plume, hence greatly reducing leakage risks. At meter-kilometer scale, the influence of capillary heterogeneity is more pronounced and can hinder or redirect CO 2 migration in both lateral and vertical directions. The impact of capillary heterogeneity across multiple spatial scales poses a great challenge in modeling CO 2 migration at field scale, because it is practically impossible to build a field-scale earth model with grid blocks at millimeter scale. We recommend a hierarchical modeling approach to address this challenge. At field scale, earth models are built to capture geological features and heterogeneities in high but still practical grid resolutions. For each facies or rock type of the field-scale model, high- resolution meter-scale “conceptual” models are built with millimeter-scale grid blocks to capture representative fine-scale bedding geometries and heterogeneities in various environments of deposition, bridging the gap from subcore scale to the size of a field-scale simulation grid block. Upscaling is then used to preserve the smaller-scale flow dynamics of various rock types in field-scale simulations. Here, future work is needed to (1) refine, improve, and validate the hierarchical modeling approach; (2) build libraries of fine-scale bedding models for facies in various environments of deposition; (3) quantify multiscale capillary heterogeneity effects under subsurface uncertainties; (4) gain learning from different storage formations; and (5) establish best practices that balance accuracy and computational speed.

Capillary heterogeneity↗
DOE OSTI2020

Osteoporosis Treatments Affect Bone Matrix Maturation in a Rat Model of Induced Cortical Remodeling

ABSTRACT To test how osteoporosis drugs affect bone matrix maturation during cortical bone remodeling, 72 pregnant rats were switched from a 0.4% to a 0.01% calcium diet at parturition for a 23‐day lactation period. At weaning, eight dams were sacrificed to establish baseline values, while the remaining dams were returned to 0.4% calcium and treated with vehicle (saline), sodium fluoride (NaF), zoledronic acid (ZA), or sclerostin antibody (Scl‐Ab) for either 7 or 28 days (eight animals per group per time point). Femora were examined by μCT, dynamic histomorphometry, Fourier transform infrared imaging, and three‐point bending of notched specimens. Cortical porosity decreased in all groups from baseline to day 28. Intracortical mineralizing surface (MS/BS) and mineral apposition rate (MAR), as well as the mineral‐to‐matrix ratio were unaffected by treatment, but intracortical crystallinity was increased in the ZA group at day 10 compared with vehicle. Cortical area increased in all groups over 28 days mainly because of an addition of bone at the endocortical surface. Endocortical MS/BS did not vary among the groups, but endocortical MAR was suppressed in the NaF group at day 2 and elevated in the Scl‐Ab group at day 4 compared with vehicle. Endocortical mineral‐to‐matrix ratio was increased at days 5 and 10 following NaF treatment and endocortical crystallinity was increased at day 5 following ZA treatment compared with vehicle. Fracture toughness did not differ among the groups. Thus, the treatments affected matrix maturation more strongly at the endocortical then intracortical envelope. In this model of induced remodeling, the bone formation phase is synchronized at multiple sites, facilitating study of the effects of drugs or other bone‐targeting agents on matrix maturation independent of their effects on the initiation of remodeling. © 2020 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Data for Zheng et al. (2025), "AquaMEND: Reconciling multiple impacts of salinization on soil carbon biogeochemistry"

Soil salinization, exacerbated by climate change, poses a global threat to coastal ecosystems and soil function. Salinity affects soil carbon cycling by directly impacting microbial activity and indirectly altering soil physicochemical properties, but current models inadequately represent these complexities. This dataset contains the observational and modeling data from Zheng et al. (2025), which described a process-based modeling framework that couples soil solution chemistry with microbial carbon cycling reactions to study the impacts of soil salinization. This conceptual model is implemented numerically into the open-source geochemical program PHREEQC 3.0 (Parkhurst and Appelo, 2013). This dataset consists of: - Figure2_AquaMEND_salinity_buffer: Contains model simulation outputs to assess the impact of three different cation exchange and surface complexation processes on salinity buffering (Fig. 2 from Zheng et al. 2025). - Figure3_Salinity_function: Contains salinity function fitting for literature data (Fig. 3 from Zheng et al. 2025). - Figure4_AquaMEND_microbial_mechanisms: Contains model simulation outputs for testing various microbial process-based hypotheses related to soil salinization, including microbial mortality, carbon use efficiency (CUE), extracellular enzyme activity, and other microbial mechanisms (Fig. 4 from Zheng et al. 2025). - Figure5_AquaMEND_Redox: Contains on model simulation outputs to evaluate shifts among key redox processes, such as aerobic respiration, sulfate reduction, and methanogenesis (Fig.5 from Zheng et al. 2025). - Figure6_AquaMEND_sorption: Contains on model simulation outputs for investigating the effects of salinity on dissolved organic matter (DOM) sorption and desorption processes (Fig. 6 from Zheng et al. 2025). - Figure7_AquaMEND_process_couple: Contains on model simulation outputs for exploring coupled biotic-abiotic processes and their interactions (Fig. 7 from Zheng et al. 2025). - data: Includes datasets used to develop salinity response functions and evaluate salinity buffering capacity. Datasets for MEND model calibration. - database: Contains the `.dat` file required by PHREEQC for model execution. - README.md: A Markdown plain text file describing the computational tools and directories. Files are a mixture of plain text CSV (comma-separated value) and plain text *.dat files written by the model; no special software is required to read them.

EARTH SCIENCE > AGRICULTURE > SOILS > SOIL SALINIT↗
DOE OSTI2025

Data for Kim et al., "Variations in the optical and molecular composition of dissolved organic matter exported from coastal wetlands"

Knowledge about sources and composition of marsh-derived dissolved organic matter (DOM) is critical for understanding the role of marshes in coastal biogeochemical cycling and the fate of marsh-derived DOM in the ocean. To investigate tidal variability in composition of marsh-derived DOM, Kim et al. examined the optical and molecular characteristics of hourly surface water samples at three tidal creeks in the Chesapeake Bay. Groundwater samples along the terrestrial landscape gradient as well as estuarine water from the adjacent estuary at each site were also collected to help resolve sources of surface water DOM. Samples were collected in summer 2024 at three sites – SWH: Sweet Hall Marsh, GCW: Kirkpatrick Marsh, and GWI: Goodwin Islands – which are part of synoptic sites in the Chesapeake Bay region of the COMPASS-FME (Coastal Observations, Mechanisms, and Predictions Across Systems and Scales - Field, Measurements, and Experiments) project. Surface water samples were collected hourly over a 48-hour period at each site. Groundwater and estuarine water samples were collected once. This dataset includes- Surface water depth and salinity- Dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) concentrations- Optical indices and relative composition of parallel factor analysis (PARAFAC) components- High resolution mass spectrometry data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Multispectral UAV imagery of experimental freshwater wetlands under 5 ppt saltwater intrusion, Louisiana, 2023 and 2024

Multispectral imagery was collected using an unmanned aerial vehicle (UAV) to evaluate how freshwater vegetation responds to short-term simulated saltwater intrusion events. The purpose of this data collection was to understand how plant health changes in response to acute salinity exposure, which is increasingly relevant in coastal wetland ecosystems facing sea level rise and storm surge events, such as in coastal Louisiana. Three experimental saltwater intrusions were conducted at a salinity of approximately 5 parts per thousand (ppt) for durations of 6-days, 10-days, and 17-days. UAV flights occurred both before and after each treatment. The resulting imagery was processed using Pix4DMapper software to georeference the images and generate orthomosaics. The multispectral sensor used in this study captures reflectance in five bands: blue, green, red, red-edge, and near-infrared. The uploaded data consist of georeferenced .tif orthomosaics for each spectral band, which are compatible with GIS software for vegetation analysis. This imagery can be utilized in investigations into vegetation stress, remote sensing of freshwater wetland ecosystems, and modeling of plant response to environmental changes.

EARTH SCIENCE > BIOSPHERE > ECOSYSTEMS↗
DOE OSTI2025

Data for Roebuck et al. (2025), "Differences in dissolved organic matter composition between rivers and estuaries is conserved across freshwater and saltwater coastal regions"

Dissolved organic matter (DOM) in coastal surface waters influences local water quality and is an important component of biogeochemical cycling in coastal systems, but the processes that alter DOM composition along lower reaches of rivers and estuarine waters are poorly understood. Roebuck et al. (2025) leveraged a spatially distributed community sampling effort in coastal ecosystems across two regions to identify broad spatial drivers of surface water DOM composition and identify transferable trends between saltwater and freshwater coastal systems. Samples were collected by community members from 47 locations within the mid-Atlantic and Great Lakes coastal regions.This dataset includes:* A selection of commonly reported absorbance and fluorescence peaks normalized to dissolved organic carbon concentrations* Parallel factor output from the EC1 fluorescence datasets* A selection of commonly reported absorbance and fluorescence peaks * Spectral indices output from matlab script for absorbance and fluorescence datasets* CO2sys calculations of pH changes under varying temperatures and a constant salinity, DIC, and alkalinity concentrationAll data files are plain-text CSV (comma separated value) and no special software is required to read them.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Impact of Rock Wettability and Mineralization on CO 2 Storage Efficiency in Basalt Reservoirs

Basalt formations have emerged as highly promising targets for geological CO 2 storage due to their abundance of reactive silicate minerals that can rapidly convert dissolved CO 2 into stable carbonate minerals. The efficiency of CO 2 trapping in basalts, however, depends not only on their geochemical reactivity but also on reservoir wettability, which governs how CO 2 partitions among structural, residual, solubility, and mineral trapping mechanisms. However, wettability and mineral kinetics have largely been examined separately, wettability for plume migration and kinetics in terms of mineralization, leaving their coupled impact unquantified. Here, we systematically integrate th ese processes in a reservoir-scale reactive transport model to quantify the impact of three distinct wettability conditions (water-wet, mixed-wet, and CO 2 -wet) on plume migration, mineral precipitation, pore-scale blockage, and long-term immobilization. Results show that under ideal conditions (no mineralization), water-wet systems exhibited plume aspect ratios up to 28% higher than CO 2 -wet systems and promoted at least 60% greater residual trapping. When mineralization was incorporated, mineral trapping accounted for 57%, 53%, and 46% of the total immobilized CO 2 in water-wet, mixed-wet, and CO 2 -wet systems, respectively. Dissolved CO 2 contributed 43-46%, while residual trapping remained below 5%, and mobile CO 2 was substantially reduced due to mineralization, demonstrating that as the system becomes more water-wet, CO 2 is more effectively converted into stable carbonate minerals, although extensive mineral precipitation may lead to pore clogging. A global Sobol-Morris sensitivity analysis further reveals that the kinetic parameters of reactive minerals are the most influential factor, followed by wettability, while salinity has only a minor influence. Furthermore, these findings highlight that wettability is not merely a flow property but a fundamental control on CO 2 mineralization in basalts, with direct implications for site selection for storage projects.

Basalts↗
DOE OSTI2020

Modeling Functional Organic Chemistry in Arctic Rivers: An Idealized Siberian System

Rivers of the Arctic will become ever more important for the global climate, since they carry a majority of continental dissolved organic carbon flux into the rapidly changing polar ocean. Aqueous organics comprise a wide array of functional groups, several of which are likely to impact coastal and open water biophysical properties. Light attenuation, interfacial films, aerosol formation, gas release and momentum exchange can all be cited. We performed Lagrangian kinetic modeling for the evolution of riverine organic chemistry as the molecules in question make their way from the highlands to Arctic outlets. Classes as diverse as the proteins, sugars, lipids, re-condensates, humics, bio-tracers and small volatiles are all included. Our reduced framework constitutes an idealized northward flow driving a major hydrological discharge rate and primarily representing the Russian Lena. Mountainous, high solute and tundra sources are all simulated, and they meet up at several points between soil and delta process reactors. Turnover rates are parameterized beginning with extrapolated coastal values imposed along a limited tributary network, with connections between different terrestrial sub-ecologies. Temporal variation of our total dissolved matter most closely resembles the observations when we focus on the restricted removal and low initial carbon loads, suggesting relatively slow transformation along the water course. Thus, channel combinations and mixing must play a dominant role. Nevertheless, microbial and photochemical losses help determine the final concentrations for most species. Chemical evolution is distinct for the various functionalities, with special contributions from pre- and post-reactivity in soil and delta waters. Several functions are combined linearly to represent the collective chromophoric dissolved matter, characterized here by its absorption. Tributaries carry the signature of lignin phenols to segregate tundra versus taiga sources, and special attention is paid to the early then marine behaviors of low molecular weight volatiles. Heteropolycondensates comprise the largest percentage of reactive carbon in our simulations due to recombination/accumulation, and they tend to be preeminent at the mouth. Outlet concentrations of individual structures such as amino acids and absorbers lie above threshold values for biophysical influence, on the monolayer and light attenuation. The extent of coastal spreading is examined through targeted regional box modeling, relying on salinity and color for calibration. In some cases, plumes reach the scale of peripheral arctic seas, and amplification is expected during upcoming decades. Conclusions are mapped from the Lena to other boreal discharges, and future research questions are outlined regarding the bonding type versus mass release as permafrost degrades. Dynamic aqueous organic coupling is recommended for polar system models, from headwaters to coastal diluent.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

TEMPEST3 surface runoff water chemistry and organic matter composition

Coastal flooding, driven by storm surges and sea level rise, can mobilize organic matter (OM) via runoff, while introducing compositionally distinct OM (e.g., estuarine OM) into the system. To understand event-scale OM dynamics, we monitored source waters and surface runoff during an ecosystem-scale field manipulation experiment, TEMPEST (Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments), in June 2024. The TEMPEST experiment is part of the COMPASS-FME (Coastal Observations, Mechanisms, and Predictions Across Systems and Scales – Field, Measurements, and Experiments) project and designed to investigate biogeochemical and ecological impacts of freshwater and seawater flooding on coastal terrestrial-aquatic interface ecosystems by simulating freshwater and seawater storm events in two 2000m2 coastal upland forest plots (freshwater and brackish seawater plots). The temporal coverage of this dataset is during the TEMPESTⅢ event (June 11-13, 2024). This dataset contains: - Surface runoff discharge measured by flumes - Sensor data (specific conductivity, salinity, dissolved oxygen, and temperature) - Particle size distribution - Total suspended sediment concentrations (TSS), particulate and dissolved organic carbon (POC, DOC) concentrations, total nitrogen and total dissolved nitrogen (TN, TDN) concentrations - Bulk particulate and dissolved OM compositions (stable C and N isotopes of particulates and optical measurements of chromophoric dissolved OM) - High resolution mass spectrometry analysis data - Water isotope data All data files are plain-text CSV (comma-separated value), and no special software is required to read them.

COMPASS-FME↗
DOE OSTI2022

Dataset for 'Ombadi, M. & Varadharajan, C. (2022). Urbanization and aridity mediate distinct salinity response to floods in rivers and streams across the Contiguous United States, Water Research'

This package contains data sets and code used to obtain the results in Ombadi, M., & Varadharajan, C. (2022). Urbanization and aridity mediate distinct salinity response to floods in rivers and streams across the Contiguous United States. Water Research, 118664. The folder "data" contains 259 .csv files, each of which has daily time series of concurrent streamflow (Q) and specific conductance (SC) for each of the sites used in this study originally downloaded from the USGS National Water Information System (NWIS; USGS, 2016). The number of data points in each of the files is at least 3650 (i.e. 10 years of daily measurements). The folder "RF_single_data" contains 259 .csv files, each of which include data used to train and test the Random Forest models at individual sites for predicting SC during days of floods. The folder "RF_regional_data" contains 3 .csv files, each of which include scaled data compiled from all sites within each climate zone (arid, temperate and wet). "metadata.csv" contains the physical properties of the 259 catchments corresponding to the sites used in this study; this data was extracted from GAGES-II dataset (Falcone et al., 2010). "RF_implementation.ipynb" is a Jupyter notebook with the code needed to implement the analysis using Random Forest models either for individual sites or for the regional models (for each climate zone). The code utilizes the data in the two folders: "RF_single_data" and "RF_regional_data" and the metadata.csv file.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Modeling Contact Angle vs. Temperature for the Quartz-Water-Decane System

Innovative approaches are needed to improve the efficiency of oil recovery technologies to meet the growing demands of fossil-fuel based energy consumption. Enhanced oil recovery (EOR) methods such as low-salinity waterflooding and chemically tuned waterflooding aim to optimize the reservoir’s wetting properties, detaching oil globules from rock surfaces and allowing easier oil flow through pore throats. This wetting behavior is commonly quantified by contact angle measurements of the rock-oil-brine interface, which have been thoroughly investigated and theorized for many systems at ambient temperatures and pressures. However, few studies exist for extending contact angle theories away from ambient conditions. In this paper, we model the contact angles of a quartz-water-decane system at elevated temperatures using the surface tension component (STC) approach. Temperature-dependent van der Waals [Lifshitz-van der Waals (LW)] interactions and hydrogen-bonding (acid-base) interactions were calculated and are incorporated into the model for the quartz-water-decane interface. Additionally, the Hough and White procedure was used to create temperature-dependent dielectric functions of quartz, water, and normal decane for calculations of Hamaker coefficients. Hamaker coefficients calculated this way are highly linear with temperature and agree well with Israelachvili’s approximation. The acid-base interactions likely contribute the most to system wettability changes. Resulting contact angles of the quartz-water-decane system shift from water-wet (16°) to slightly water-wet (57.4°) as temperature increases. The model was also successfully verified for the quartz-air-water system. Our results can be used in future studies to determine optimal injected water compositions for specific rock-oil-brine and other systems with consideration of reservoir temperature.

02 PETROLEUM↗
DOE OSTI2023

First Ever Field Pilot on Alaska's North Slope to Validate the Use of Polymer Floods for Heavy Oil EOR a.k.a Alaska North Slope Field Laboratory (ANSFL)

Alaska’s high viscosity oil resources that range between 20–30+ billion barrels represent about a third of known North Slope original oil in place (OOIP). These resources are primarily concentrated in the Schrader Bluff formation (also called West Sak on the Western North Slope) and Ugnu reservoirs and are categorized as “viscous oils” and “heavy oils” owing to their in-situ viscosities between 5–10,000 cP and up to a million+ cP respectively. The viscous oil deposits are relatively deeper (2,000 – 5,000 ft), whereas the heavy oils are somewhat shallower (2,000 – 4,000 ft). The typically shallow depths and the proximity to the continuous permafrost results in relatively lower formation temperatures and pressures, and consequently higher viscosities. The vertical depth vs. viscosity delineated in Paskvan et al. (2016) differentiates the viscous and heavy oils. As depicted in Paskvan et al. (2016), currently the main focus (referred to as “developing”) is on the viscous oils in the Schrader Bluff formation in the Milne Point Unit (MPU). Notwithstanding this Alaska North Slope (ANS) specific categorization, we use the industry adopted, all-inclusive term “heavy oil” for all high viscosity oils. Resource characterization and additional details can be found in topical publications of Paskvan et al. (2016) and Targac et al. (2005). Despite the vast resource base, the development pace, vis-à-vis the production of heavy oils has been very slow and limited due to multiple factors such as cost, logistics, challenging arctic environment, poor waterflood sweep efficiency due to mobility contrasts, and significantly high minimum miscibility pressures (MMP). Most importantly, typical or standard thermal methods that are commonplace elsewhere (Canada, California) are inapplicable due to the continuous permafrost. As a consequence, cumulative production of heavy and viscous oils is a little over 1% of OOIP slope wide and currently, there is hardly any production from Ugnu. However, on a broader level, these unfavorable factors are outweighed by the fact that (1) these resources, within the established infrastructure, are too large to ignore because of their strategic importance to the Nation and the State of Alaska and (2) Prudhoe Bay type diluent crude oil is still available for heavy oil transport through the Trans Alaska Pipeline System (TAPS). Similarly, from a reservoir standpoint, the following factors also are important offsets: (1) favorable rock characteristics of Schrader Bluff; (2) the promise demonstrated by the initial scoping studies (Seright 2010, 2011) suggesting significant increase of heavy oil recovery using polymer flooding; (3) successful field implementation in Canada, China and elsewhere in the world, and (4) availability of the existing pairs of horizontal injector-producer in Schrader Bluff The foregoing was recognized as the best readily available opportunity for significant investment by the US Department of Energy and the field operator Hilcorp Alaska LLC to conduct the first ever field scale experiment to test the polymer flooding technology to unlock the vast heavy oil resources on ANS. With this primary goal in mind, the research team embarked on a ~4.5 years long project that focused on the field polymer pilot complemented by supporting laboratory and simulation studies. As documented in this final report, over the course of the project, many lessons have been learned and valuable field and supporting laboratory data has been collected, which also is complemented by numerical reservoir simulations. We have been able to establish the injectivity of polymer solution, evidence of significant reduction in the water cut of previously waterflooded pattern, effective propagation of a hydrolyzed polyacrylamide (HPAM), benefits of low salinity water, provide practical guidance on handling of produced fluids containing breakthrough polymer, fit-for-purpose forecast-worthy history matched simulation model, polymer EOR benefit of 700-1000 bopd over waterflood, and most importantly a low polymer utilization factor of ~1.7 lb/stb. In summary this project is deemed as a scientific, technical and economic success, having met all objectives, fulfilled deliverables and within budget, providing impetus to apply polymer EOR throughout the Milne Point Field paving the way for even heavier viscosity oils in the Ugnu area, eventually extending the economic life of TAPS.

02 PETROLEUM↗
DOE OSTI2025

Data for Myers-Pigg et al. (2026), "Short-term coastal forest responses to a hurricane-scale freshwater and saltwater flooding experiment"

Coastal upland forests are exposed to intensifying precipitation regimes and sea level rise, increasing tree mortality and transforming these coastal forests into wetland ecosystems. Despite these well-known risks, the differing degrees to which hydrological, biogeochemical, and biological components of upland forests respond to novel salinity exposure is relatively unknown. The Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) experiment decouples two distinct disturbances associated with hydrological extremes: (1) flooding from heavy precipitation and (2) exposure to saline conditions from storm surge. This dataset includes data reported in Myers-Pigg et al. (2025), which analyzed data from the first TEMPEST flooding treatment in 2022. This includes: - Colored dissolved organic matter in porewaters - Soil temperature and oxygen - Groundwater temperature and chemistry - Dissolved organic carbon concentrations in porewaters - Soil-to-atmosphere CH4 and CO2 fluxes - Soil temperature, water content, and electrical conductivity - Root-influenced CH4 and CO2 flux - Tree sap flow velocity - The R analytical code and documentation about the computational environmental in which it was run (the "sessionInfo.txt" file) All data files are plain-text comma separated value (CSV) and no special software is required to read them.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Defining Infrastructure Feasibility for Hub-Scale Offshore Atlantic Carbon Storage in the Northeastern United States

In the Northeast U.S., deep rock formations along the Atlantic outer continental shelf may have the potential to sequester 150–1136 million metric tons of CO2. However, the design and infrastructure necessary to develop offshore carbon storage in this region is not well defined because there has been little oil and gas exploration and no commercial production. Consequently, an infrastructure feasibility design was completed for a hub-scale offshore CO2 storage system along the Northeast U.S. Atlantic. The design included development of a detailed, site-specific geological model for a location near the Great Stone Dome geological structure in the Baltimore Canyon Trough off the coast of Delaware, Maryland, and New Jersey. A field injection system topology design was completed to portray a design with eight wells in two clusters connected by central manifolds. Reservoir simulations were completed for the injection system that showed the hub may be able to inject 17 million metric tons (MMT) of CO2 per year for thirty years, but injection rates varied substantially across the eight wells. A CO2 pipeline design determined feasible routes from the east coast shoreline to the injection field. Finally, the CO2 injection system design included subsea injection trees, manifolds, and power umbilicals. This is the first study to define large-scale carbon storage design and infrastructure options for the offshore Atlantic, which can help to progress this region towards field characterization and early-mover deployment for future decarbonization in the region.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗