Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPACE NAVIGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Space shuttle navigation filter development

Problems encountered in developing a high speed trajectory data processor for the shuttle ascent and entry phases are described. The development of a 19 state acceleration filter for the processor is reported.

Lear, W. M.↗

GPS-aided Space Shuttle navigation

In the present paper, specific GPS (Global Positioning System) aided Shuttle navigation are presented as examples of the navigation performance prediction process. The process described is a statistical covariance error analysis. To facilitate detailing, the process is broken down into four portions with sharply limited interfaces. Considerations of mission scenarios form one distinct package of computer routines. Simulation of the onboard navigation filter is another facet of the process, as are the larger system covariance program and the GPS segment covariance simulation. The combination of these computer tools permits proper evaluation of the multitude of correlated error sources affecting GPS-aided Shuttle navigation.

Matchett, G.↗

Space shuttle navigation analysis. Volume 2: Baseline system navigation

Studies related to the baseline navigation system for the orbiter are presented. The baseline navigation system studies include a covariance analysis of the Inertial Measurement Unit calibration and alignment procedures, postflight IMU error recovery for the approach and landing phases, on-orbit calibration of IMU instrument biases, and a covariance analysis of entry and prelaunch navigation system performance.

Jones, H. L.↗

Radiometric orbit determination activities in support of navigating Deep Space 1 to Comet Borrelly

After several months of planning, development and testing, new software was uploaded that allowed Deep Space 1 to restore celestial inertia reference and begin thrusting towards an encounter with comet Borrelly. The new mission plan would have to work within the constraints of the new software as well as minimize use of the dwindling supply of hydrazine, the fuel needed to maintain the spacecraft attitude.

DS1↗

Orbit Determination Processes for the Navigation of the Cassini-Huygens Mission

Deep space navigation, particularly the Orbit Determination (OD) operations of Cassini at Saturn, cannot easily be automated due to the complex dynamical environment in which the spacecraft flies; however several sub-processes are automated. The Cassini OD operations are often faced with unique challenges that require more than routine procedures. The OD Team is staffed appropriately to meet the demanding schedules and allow some level of flexibility. This paper will discuss how the OD processes are developed and the seven-member OD team is scheduled to support efficient and accurate Cassini navigation operations. Also discussed will be the requirements of the radio-metric Doppler and range tracking data acquired via the Deep Space Network and the optical navigation images of the satellites to support the daily OD operations. Furthermore, the reliability of the OD solutions, which is ensured within the framework of the OD processes, will be explained.

Antreasian, P.G.↗

An Automomous Optical Navigation and Control System for Interplanetary Exploration Missions

The first fully autonomous deep-space navigation system ever implemented is planned to guide the New Millenium Deep Space-1 mission to an asteroid and comet beginning in mid-1998. This system is based to a large extent on Optical Navigation (OPNAV) technology developed for the NASA/JPL interplanetary exploration probes Voyager and Galileo. This paper describes the structure and algorithmic content of the Autonomous OPNAV system. The system has several major autonomous functions: picture planning, image analysis, orbit determination, manuever design and general interaction with other onboard autonomous systems.

optical navigation↗

Navigation for the new millennium: Autonomous navigation for Deep Space 1

The autonomous optical navigation system technology for the Deep Space 1 (DS1) mission is reported on. The DS1 navigation system will be the first to use autonomous navigation in deep space. The systems tasks are to: perform interplanetary cruise orbit determination using images of distant asteroids; control and maintain the orbit of the spacecraft with an ion propulsion system and conventional thrusters, and perform late knowledge updates of target position during close flybys in order to facilitate high quality data return from asteroid MaAuliffe and comet West-Kohoutek-Ikemura. To accomplish these tasks, the following functions are required: picture planning; image processing; dynamical modeling and integration; planetary ephemeris and star catalog handling; orbit determination; data filtering and estimation; maneuver estimation, and spacecraft ephemeris updating. These systems and functions are described and preliminary performance data are presented.

Reidel, J. E.↗

Adaptive Coding and Modulation Experiment With NASA's Space Communication and Navigation Testbed

National Aeronautics and Space Administration (NASA)'s Space Communication and Navigation Testbed is an advanced integrated communication payload on the International Space Station. This paper presents results from an adaptive coding and modulation (ACM) experiment over S-band using a direct-to-earth link between the SCaN Testbed and the Glenn Research Center. The testing leverages the established Digital Video Broadcasting Second Generation (DVB-S2) standard to provide various modulation and coding options, and uses the Space Data Link Protocol (Consultative Committee for Space Data Systems (CCSDS) standard) for the uplink and downlink data framing. The experiment was con- ducted in a challenging environment due to the multipath and shadowing caused by the International Space Station structure. Several approaches for improving the ACM system are presented, including predictive and learning techniques to accommodate signal fades. Performance of the system is evaluated as a function of end-to-end system latency (round- trip delay), and compared to the capacity of the link. Finally, improvements over standard NASA waveforms are presented.

waveforms↗

Adaptive Coding and Modulation Experiment With NASA's Space Communication and Navigation Testbed

National Aeronautics and Space Administration (NASA)'s Space Communication and Navigation Testbed is an advanced integrated communication payload on the International Space Station. This paper presents results from an adaptive coding and modulation (ACM) experiment over S-band using a direct-to-earth link between the SCaN Testbed and the Glenn Research Center. The testing leverages the established Digital Video Broadcasting Second Generation (DVB-S2) standard to provide various modulation and coding options, and uses the Space Data Link Protocol (Consultative Committee for Space Data Systems (CCSDS) standard) for the uplink and downlink data framing. The experiment was conducted in a challenging environment due to the multipath and shadowing caused by the International Space Station structure. Several approaches for improving the ACM system are presented, including predictive and learning techniques to accommodate signal fades. Performance of the system is evaluated as a function of end-to-end system latency (round-trip delay), and compared to the capacity of the link. Finally, improvements over standard NASA waveforms are presented.

waveforms↗

Space Shuttle Orbiter entry through landing navigation

The Space Shuttle Orbiter navigation system must be capable of determining its position and velocity throughout a variety of operational regimes. The design and operation of the entry through landing navigation system is described as it operates during a nominal end of mission from the orbital coasting phase throughout atmospheric flight and landing. Design and operation of the Kalman filter is described. Stabilization of the altitude channel prior to acquisition of external measurement data is described. Utilization of the Tactical Air Navigation (TACAN), barometric altimeter, and Microwave Scan Beam Landing System external measurement data is described. A comparison is made between predicted performance and the navigation accuracy observed during flight.

Ewell, J. J., Jr.↗

ARTSN: An Automated Real-Time Spacecraft Navigation System

As part of the Deep Space Network (DSN) advanced technology program an effort is underway to design a filter to automate the deep space navigation process.The automated real-time spacecraft navigation (ARTSN) filter task is based on a prototype consisting of a FORTRAN77 package operating on an HP-9000/700 workstation running HP-UX 9.05. This will be converted to C, and maintained as the operational version. The processing tasks required are: (1) read a measurement, (2) integrate the spacecraft state to the current measurement time, (3) compute the observable based on the integrated state, and (4) incorporate the measurement information into the state using an extended Kalman filter. This filter processes radiometric data collected by the DSN. The dynamic (force) models currently include point mass gravitational terms for all planets, the Sun and Moon, solar radiation pressure, finite maneuvers, and attitude maintenance activity modeled quadratically. In addition, observable errors due to troposphere are included. Further data types, force and observable models will be ncluded to enhance the accuracy of the models and the capability of the package. The heart of the ARSTSN is a currently available continuous-discrete extended Kalman filter. Simulated data used to test the implementation at various stages of development and the results from processing actual mission data are presented.

Burkhart, P. Daniel↗

Problems and concepts of space station guidance, navigation, and control

The Space Station System is defined as a network of space and ground assets which work together to support a variety of missions including commercial missions, science and applications missions, and technology development missions. The elements of the Space Station System include a Space Station Base, Space Platforms, Free Flyers, a Teleoperator Manuevering System (TMS), Orbital Transfer Vehicles (OTV), Orbiter Berthing Equipment, and Ground Support Equipment and Facilities. Guidance, navigation, and control (GNC) subsystem requirements are considered along with configuration trades.

Guha, A. K.↗

Shuttle navigation overview

Space Shuttle onboard navigation system tasks are related to position and velocity determination, attitude determination, sensor management, sensor Redundancy Management (RM), and navigation-related functions such as transformations, timing system utilization, and user processing for displays, guidance, and flight control. It is pointed out that Shuttle navigation is different in at least two areas from previous manned space flight navigation. The differences are related to the use of multiple units to provide protection from increased risk of failure of off-the-shelf-type equipment used for more than one flight, and the need to land at a runway. Attention is given to the navigation sensor system, the Shuttle Inertial Measurement Units, the Shuttle Star Tracker, the Crew Optical Alinement Sight, the Shuttle Tacan, the Air Data Subsystem, and aspects of navigation system mechanization.

Savely, R. T.↗