Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

ON THE 10 mum SILICATE FEATURE IN ACTIVE GALACTIC NUCLEI

The 10 mum silicate feature observed with Spitzer in active galactic nuclei (AGNs) reveals some puzzling behavior. It (1) has been detected in emission in type 2 sources, (2) shows broad, flat-topped emission peaks shifted toward long wavelengths in several type 1 sources, and (3) is not seen in deep absorption in any source observed so far. We solve all three puzzles with our clumpy dust radiative transfer formalism. Addressing (1), we present the spectral energy distribution (SED) of SST1721+6012, the first type 2 quasar observed to show a clear 10 mum silicate feature in emission. Such emission arises in models of the AGN torus easily when its clumpy nature is taken into account. We constructed a large database of clumpy torus models and performed extensive fitting of the observed SED. We find that the cloud radial distribution varies as r {sup -1.5} and the torus contains 2-4 clouds along radial equatorial rays, each with optical depth at visual approx60-80. The source bolometric luminosity is approx3 x 10{sup 12} L{sub sun}. Our modeling suggests that approx<35% of objects with tori sharing these characteristics and geometry would have their central engines obscured. This relatively low obscuration probability can explain the clear appearance of the 10 mum emission feature in SST1721+6012 together with its rarity among other QSO2. Investigating (2), we also fitted the SED of PG1211+143, one of the first type 1 QSOs with a 10 mum silicate feature detected in emission. Together with other similar sources, this QSO appears to display an unusually broadened feature whose peak is shifted toward longer wavelengths. Although this led to suggestions of non-standard dust chemistry in these sources, our analysis fits such SEDs with standard galactic dust; the apparent peak shifts arise from simple radiative transfer effects. Regarding (3), we find additionally that the distribution of silicate feature strengths among clumpy torus models closely resembles the observed distribution, and the feature never occurs deeply absorbed. Comparing such distributions in several AGN samples we also show that the silicate emission feature becomes stronger in the transition from Seyfert to quasar luminosities.

79 ASTRONOMY AND ASTROPHYSICS↗

ANOMALOUS SILICATE DUST EMISSION IN THE TYPE 1 LINER NUCLEUS OF M81

We report the detection and successful modeling of the unusual 9.7 {mu}m Si-O stretching silicate emission feature in the type 1 (i.e., face-on) LINER nucleus of M81. Using the Infrared Spectrograph (IRS) instrument on Spitzer, we determine the feature in the central 230 pc of M81 to be in strong emission, with a peak at {approx}10.5 {mu}m. This feature is strikingly different in character from the absorption feature of the galactic interstellar medium, and from the silicate absorption or weak emission features typical of galaxies with active star formation. We successfully model the high signal-to-noise ratio IRS spectra with porous silicate dust using laboratory-acquired mineral spectra. We find that the most probable fit uses micron-sized, porous grains of amorphous silicate and amorphous carbon. In addition to silicate dust, there is weak polycyclic aromatic hydrocarbon (PAH) emission present (particularly at 11.3 {mu}m, arising from the C-H out-of-plane bending vibration of relatively large PAHs of {approx}500-1000 C atoms) whose character reflects the low-excitation active galactic nucleus environment, with some evidence that small PAHs of {approx}100-200 C atoms (responsible for the 7.7 {mu}m C-C stretching band) in the immediate vicinity of the nucleus have been preferentially destroyed. Analysis of the infrared fine structure lines confirms the LINER character of the M81 nucleus. Four of the infrared H{sub 2} rotational lines are detected and fit to an excitation temperature of T {approx} 800 K. Spectral maps of the central 230 pc in the [Ne II] 12.8 {mu}m line, the H{sub 2} 17 {mu}m line, and the 11.3 {mu}m PAH C-H bending feature reveal arc- or spiral-like structures extending from the core. We also report on epochal photometric and spectroscopic observations of M81, whose nuclear intensity varies in time across the spectrum due to what is thought to be inefficient, sub-Eddington accretion onto its central black hole. We find that, contrary to the implications of earlier photometry, the nucleus has not varied over a period of two years at these infrared wavelengths to a precision of about 1%.

79 ASTRONOMY AND ASTROPHYSICS↗

Interstellar silicate dust in the z = 0.685 absorber toward TXS 0218+357

We report the detection of interstellar silicate dust in the z {sub abs} = 0.685 absorber along the sightline toward the gravitationally lensed blazar TXS 0218+357. Using Spitzer Space Telescope Infrared Spectrograph data, we detect the 10 μm silicate absorption feature with a detection significance of 10.7σ. We fit laboratory-derived silicate dust profile templates obtained from the literature to the observed 10 μm absorption feature and find that the best single-mineral fit is obtained using an amorphous olivine template with a measured peak optical depth of τ{sub 10} = 0.49 ± 0.02, which rises to τ{sub 10} ∼ 0.67 ± 0.04 if the covering factor is taken into account. We also detected the 18 μm silicate absorption feature in our data with a >3σ significance. Due to the proximity of the 18 μm absorption feature to the edge of our covered spectral range, and associated uncertainty about the shape of the quasar continuum normalization near 18 μm, we do not independently fit this feature. We find, however, that the shape and depth of the 18 μm silicate absorption are well matched to the amorphous olivine template prediction, given the optical depth inferred for the 10 μm feature. The measured 10 μm peak optical depth in this absorber is significantly higher than those found in previously studied quasar absorption systems. However, the reddening, 21 cm absorption, and velocity spread of Mg II are not outliers relative to other studied absorption systems. This high optical depth may be evidence for variations in dust grain properties in the interstellar medium between this and the previously studied high redshift galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Better alternatives to “astronomical silicate”: Laboratory-based optical functions of chondritic/solar abundance glass with application to HD 161796

“Astronomical” or “circumstellar” silicate optical functions (real and imaginary indices of refraction n(λ) and k(λ)) have previously been derived from compositionally and structurally disparate samples; past values were compiled from different sources in the literature, and are essentially kluges of observational, laboratory, and extrapolated or interpolated values. These synthetic optical functions were created because astronomers lack the quantitative data on amorphous silicates at all wavelengths needed for radiative transfer modeling. This paper provides optical functions that (1) are created with a consistent methodology, (2) use the same sample across all wavelengths, and (3) minimize interpolation and extrapolation wherever possible. We present electronic data tables of optical functions derived from mid-ultraviolet to far-infrared (FIR) laboratory transmission spectra for two materials: iron-free glass with chondritic/solar atmospheric abundances, and metallic iron. We compare these optical functions to other popular n, k data used to model amorphous silicates (e.g., “astronomical” or “circumstellar” silicate), both directly and in application to a simple system: the dust shell of the post-AGB star HD 161796. Using the new optical functions, we find that the FIR profile of model spectral energy distributions are significantly affected by the ratio of glass to iron. Our case study on HD 161796 shows that in modeling with our new optical functions, the mineralogy is markedly different from that derived using synthetic optical functions and suggests a new scenario of crystalline silicate formation.

79 ASTRONOMY AND ASTROPHYSICS↗

COHESION OF AMORPHOUS SILICA SPHERES: TOWARD A BETTER UNDERSTANDING OF THE COAGULATION GROWTH OF SILICATE DUST AGGREGATES

Adhesion forces between submicrometer-sized silicate grains play a crucial role in the formation of silicate dust agglomerates, rocky planetesimals, and terrestrial planets. The surface energy of silicate dust particles is the key to their adhesion and rolling forces in a theoretical model based on contact mechanics. Here we revisit the cohesion of amorphous silica spheres by compiling available data on the surface energy for hydrophilic amorphous silica in various circumstances. It turned out that the surface energy for hydrophilic amorphous silica in a vacuum is a factor of 10 higher than previously assumed. Therefore, the previous theoretical models underestimated the critical velocity for the sticking of amorphous silica spheres, as well as the rolling friction forces between them. With the most plausible value of the surface energy for amorphous silica spheres, theoretical models based on the contact mechanics are in harmony with laboratory experiments. Consequently, we conclude that silicate grains with a radius of 0.1 μm could grow to planetesimals via coagulation in a protoplanetary disk. We argue that the coagulation growth of silicate grains in a molecular cloud is advanced either by organic mantles rather than icy mantles or, if there are no mantles, by nanometer-sized grain radius.

79 ASTRONOMY AND ASTROPHYSICS↗

SOFT X-RAY IRRADIATION OF SILICATES: IMPLICATIONS FOR DUST EVOLUTION IN PROTOPLANETARY DISKS

The processing of energetic photons on bare silicate grains was simulated experimentally on silicate films submitted to soft X-rays of energies up to 1.25 keV. The silicate material was prepared by means of a microwave assisted sol–gel technique. Its chemical composition reflects the Mg{sub 2}SiO{sub 4} stoichiometry with residual impurities due to the synthesis method. The experiments were performed using the spherical grating monochromator beamline at the National Synchrotron Radiation Research Center in Taiwan. We found that soft X-ray irradiation induces structural changes that can be interpreted as an amorphization of the processed silicate material. The present results may have relevant implications in the evolution of silicate materials in X-ray-irradiated protoplanetary disks.

79 ASTRONOMY AND ASTROPHYSICS↗

Silicate dust in active galactic nuclei

The unification theory of active galactic nuclei (AGNs) hypothesizes that all AGNs are surrounded by an anisotropic dust torus and are essentially the same objects but viewed from different angles. However, little is known about the dust that plays a central role in the unification theory. There are suggestions that the AGN dust extinction law appreciably differs from that of the Galaxy. Also, the silicate emission features observed in type 1 AGNs appear anomalous (i.e., their peak wavelengths and widths differ considerably from that of the Galaxy). In this work, we explore the dust properties of 147 AGNs of various types at redshifts z≲0.5, with special attention paid to 93 AGNs that exhibit the 9.7 and 18 μm silicate emission features. We model their silicate emission spectra obtained with the Infrared Spectrograph aboard the Spitzer Space Telescope. We find that 60/93 of the observed spectra can be well explained with “astronomical silicate,” while the remaining sources favor amorphous olivine or pyroxene. Most notably, all sources require the dust to be micron-sized (with a typical size of ∼1.5 ± 0.1 μm), much larger than submicron-sized Galactic interstellar grains, implying a flat or “gray” extinction law for AGNs. We also find that, while the 9.7 μm emission feature arises predominantly from warm silicate dust of temperature T ∼ 270 K, the ∼5–8 μm continuum emission is mostly from carbon dust of T ∼ 640 K. Finally, the correlations between the dust properties (e.g., mass, temperature) and the AGN properties (e.g., luminosity, black hole mass) have also been investigated.

79 ASTRONOMY AND ASTROPHYSICS↗

Constraints on core formation from systematic study of metal-silicate partitioning on a great number of siderophile elements

The abundances of siderophile elements in the Earth's mantle are the result of core formation in the early Earth. Many variables are involved in the prediction of metal/silicate siderophile partition coefficients during core segregation: pressure, temperature, oxygen fugacity, silicate and metal compositions. Despite publications of numerous results of metal-silicate experiments, the experimental database and predictive expressions for elements partitioning are hampered by a lack of systematic study to separate and evaluate the effects of each variable. Only a relatively complete experimental database that describes Ni and Co partitioning now exists but is not sufficient to unambiguously decide between the most popular model for core formation with a single stage core-mantle equilibration at the bottom of a deep magma ocean (e.g. Li and Agee, 2001) and more recent alternative models (e.g. Wade and Wood, 2005; Rubie et al., 2007). In this experimental work, systematic study of metal silicate partitioning is presented for elements normally regarded as moderately siderophile (Mo, As, Ge, W, P, Ni, Co), slightly siderophile (Zn, Ga, Mn, V, Cr) and refractory lithophile (Nb, Ta). Using a new piston-cylinder design assembly allows us to present a suite of isobaric partitioning experiments at 3 GPa within a temperature range from 1600 to 2600 C and over a range of relative oxygen fugacity from IW-1.5 to IW-3.5. Silicate melts range from basaltic to peridotite in composition. The individual effect of pressure is also investigated through a combination of piston cylinder and multi anvil isothermal experiments from 0.5 to 18 GPa at 1900 C. Absolute measurements of partitioning coefficients combining EMP and LA-ICPMS analytical methods are provided. New results are obtained for elements whose partitioning behavior is usually poorly constrained and not integrated into any accretion or core formation models. We find notably that Ge, As, Mo become less siderophile with increasing temperature. In contrast Zn, Nb and Ta become more siderophile while Ga, W and P show negligible dependence with increasing temperature. Moreover, As, Mo, W, Ga and Nb become less siderophile with increasing pressure while a small influence of pressure is observed for Ta, Ge and Zn. At 3 GPa, regressions of the partitioning data show a 5+ valence state for As, Mo, W and Ta, 3+ for Ga, and 2+ for Ge and Zn. Finally regressions show that highly charged cations (Nb, P, W, Mo and As) are, as expected, the most sensitive to variations in silicate melt composition with the exception of Ta that shows a surprisingly small dependence. Generally, models of partitioning behaviors during core segregation are obtained for each element and seem to exclude the possibility of a single stage equilibrium scenario for the earth's core formation.

58 GEOSCIENCES↗

Alteration of Granite Surface with the Formation of Calcium-Silicate-Hydrate by Alkaline Groundwater - 19165

Under the hyper alkaline Ca-rich condition caused by cementitious materials used for the geological disposal system, host rocks containing various silicate minerals will alter with the dissolution of the minerals, and the expansion of flow paths may accelerate the migration of radionuclides. On the other hand, the formation of secondary minerals under such condition will contribute to the confinement for radionuclides. As a typical secondary mineral, we focused on calcium-silicate-hydrate (C-S-H). In particular, this study examined the C-S-H formation on the granite surface under the hyper-alkaline Ca-rich condition by the immersion tests and the estimation based on the film theory. In the immersion tests, granite chips immersed in a Ca(OH)2 or a NaOH solution adjusted pH to 12.3 over 60 days. From the results, the Si concentration in the Ca(OH)2 solution was much lower than that in the NaOH solution, and the Ca concentration decreased in the case of Ca(OH)2 solution. These indicates the C-S-H formation around the granite surface. Furthermore, assuming that the C-S-H layer was formed on the granite surface, the depth point of the C-S-H layer, where C-S-H was formed by reacting Ca ions with silicic acid leached from granite, was estimated by the film theory. The estimation result showed the C-S-H layer would grow with the C-S-H formation at the surface contacting granite and C-S-H. These results in this study suggest that micro flow-paths in the host rocks will be clogged by the continuous growth of the C-S-H layer on the surface of silicate minerals. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effects of Composition and Oxidation States on the Structures of Chromium-Containing Sodium Silicate Glasses: Molecular Dynamics Simulations using Machine Learning Interatomic Potentials

Chromium represents a significant challenge for the vitrification of high-level nuclear waste into silicate and borosilicate glasses due to its low solubility and variable oxidation states, which can limit the waste loading due to promotion of crystallization or phase separation during processing. In this study, we modeled chromium containing silicate glasses using molecular dynamics simulations with three machine learning interatomic potentials (MLIPs), MACE, CHGNet, and PFP were employed, to gain insights on glass composition and oxidation states on the structures of these glasses. One of the goals is to evaluate their ability of these MLIPs to accurately represent the general structure of silicate glasses and chromium local environments as a function of chromium oxidation states. Density Functional Theory (DFT) based calculations and experimental data such as neutron structure factors were used to validate the structural models. It was found that the foundation models of all three MLIPs are able to reproduce general structural features of the sodium silicate glass structure consistent with experimental and DFT data, but only CHGNet and PFP can accurately capture the oxidation states and local environment of chromium: tetrahedral for Cr6+ and octahedral for Cr3+. Furthermore, we studied the effect of varying Cr3+/ Cr6+ (Cr3+/Crtotal) ratio and total chromium content using PFP. Our results show that Cr6+ enhances network polymerization by reducing non-bridging oxygens through Na? charge compensation required due to the formation of chromate (CrO42-) species, while Cr³? acts as a network modifier that disrupts connectivity. System size effects on the structural characteristics and chromium environments were also tested using the PFP potential. This work highlights the importance of careful validation on the precision, transferability, and potential of MLIPs for modeling glasses containing transition metal elements that can exist in multiple oxidation states. It is also encouraging to see the foundational models are all three MLFFs are able to reproduce the basic sodium silicate glass structures, while suggesting additional training or refining is needed to improve the description of more complex systems containing transition metals.

Puga, Christina L.↗

Reversible Formation of Silanol Groups in Two-Dimensional Siliceous Nanomaterials under Mild Hydrothermal Conditions

Monitoring the effects of mild hydrothermal conditions, in situ, on siliceous materials remains challenging using surface science techniques, which often require electrically conductive substrates. The emergence of two-dimensional (2-D) siliceous nanomaterials deposited on metal single crystals overcomes this limitation. Here, we use infrared reflection absorption spectroscopy (IRRAS) to study the effects of mild hydrothermal conditions, in situ, on 2-D model systems, namely, all-Si MFI nanosheets supported on Au(111) and a polymorphous bilayer silicate supported on Ru(0001). We find that the formation of silanol groups (SiOH) occurs at 473 and 573 K under a H 2 O pressure of 3 mbar in the MFI nanosheets, but not in the polymorphous bilayer silicate. The effects of mild hydrothermal conditions are reversible in the MFI nanosheets and do not result in framework degradation. Implications shown here provide a fundamental understanding of the impact of mild hydrothermal conditions on the 2-D siliceous nanomaterials and serve as a starting point when considering these effects on three-dimensional (3-D) ones.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nonlinear dynamics and instability of aqueous dissolution of silicate glasses and minerals

Aqueous dissolution of silicate glasses and minerals plays a critical role in global biogeochemical cycles and climate evolution. The reactivity of these materials is also important to numerous engineering applications including nuclear waste disposal. The dissolution process has long been considered to be controlled by a leached surface layer in which cations in the silicate framework are gradually leached out and replaced by protons from the solution. This view has recently been challenged by observations of extremely sharp corrosion fronts and oscillatory zonings in altered rims of the materials, suggesting that corrosion of these materials may proceed directly through congruent dissolution followed by secondary mineral precipitation. Here we show that complex silicate material dissolution behaviors can emerge from a simple positive feedback between dissolution-induced cation release and cation-enhanced dissolution kinetics. This self-accelerating mechanism enables a systematic prediction of the occurrence of sharp dissolution fronts (vs. leached surface layers), oscillatory dissolution behaviors and multiple stages of glass dissolution (in particular the alteration resumption at a late stage of a corrosion process). In conclusion, our work provides a new perspective for predicting long-term silicate weathering rates in actual geochemical systems and developing durable silicate materials for various engineering applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resolving the stellar sources of isotopically rare presolar silicate grains through Mg and Fe isotopic analyses

We conducted multi-element isotopic analyses of 11 presolar silicate grains from the Acfer 094 meteorite having unusual O isotopic compositions. Eight grains are {sup 18}O-rich, one is {sup 16}O-rich, and two are extremely {sup 17}O-rich. We constrained the grains' stellar sources by measuring their Si and Mg isotopic ratios, and also the {sup 54}Fe/{sup 56}Fe and {sup 57}Fe/{sup 56}Fe ratios for five grains. The Mg and Fe isotopic measurements were conducted after surrounding matrix grains were removed for more accurate ratios. Most of the {sup 18}O-rich silicates had anomalous Mg isotopic ratios, and their combined isotopic constraints are consistent with origins in low-mass Type II supernovae (SNe II) rather than high-metallicity stars. The isotopic ratios of the {sup 16}O-rich silicate are also consistent with an SN origin. Mixing small amounts of interior stellar material with the stellar envelope replicated all measured isotopic ratios except for {sup 29}Si/{sup 28}Si and {sup 54}Fe/{sup 56}Fe in some grains. The {sup 29}Si/{sup 28}Si ratios of all SN-derived grains are matched by doubling the {sup 29}Si yield in the Ne- and Si-burning zones. The {sup 54}Fe/{sup 56}Fe ratios of the grains imply elemental fractionation in the Si/S zone, or introduction of isotopically solar Fe by secondary processing. The two highly {sup 17}O-rich silicates exhibited significant {sup 25}Mg and/or {sup 26}Mg enrichments and their isotopic ratios are best explained by strong dilution of 1.15 M {sub ☉} CO nova matter. We estimate that ∼12% and 1% of presolar silicates have SN and nova origins, respectively, similar to presolar SiC and oxides. This implies that asymptotic giant branch stars are the dominant dust producers in the galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

Hydration and reaction mechanisms on sodium silicate glass surfaces from molecular dynamics simulations with reactive force fields

Recent development of reactive force fields have enabled molecular dynamics simulations of interactions between silicate glasses and water at the atomistic scale. While multicomponent silicate glasses encompass a wide variety of compositions and properties, one common structural feature in these glasses is the combination of the network structure that is made up of silica tetrahedra linked through corner sharing interspersed with network modifiers like alkali and alkaline-earth ions that break up the Si–O–Si linkages by forming nonbridging oxygen. In reactions with water, ion exchange between alkali ions in the glass and proton or hydronium in the solution, as well as hydrolysis reaction of the Si–O–Si linkages and subsequent silanol formation, is observed and well documented. Furthermore, we have used a set of recently developed reactive force field to investigate the reactions between water and the surfaces of silica and sodium silicate glasses of different compositions for reactions up to 8 nanoseconds. Our results indicate sodium leaching into water and diffusion of water molecules up to 25 Å into the glass surface. We examined the structural and compositional changes inside the glass and around the diffused ions and use these to explain the rates of silanol formation at the surface. We also observed proton transport in the glass which has an indirect influence on the silanol formation rates. While the surface of the glass was rough to start with, it undergoes further modification into a hydrated gel-like structure in the glass for up to 5 Å in the higher alkali containing glasses. It was found that the leached sodium ions remain close to the interface and that fragments of silicate network from the surface is capable of dislodging from the bulk glass and enter the aqueous solution. These simulations thus provide insights into the formation and structure of an alteration layers commonly observed in multicomponent silicate glasses corroded in aqueous solutions.

36 MATERIALS SCIENCE↗

LionGlass™: A low‐melting, carbonate‐free alternative to soda lime silicate glass

LionGlass™ is Penn State University's patent-pending alumino-silicophosphate glass compositional family that offers, for the first time, a viable low-melting, carbonate-free alternative to soda lime silicate glass by (a) lowering the melting temperature by up to 400°C compared to soda lime silicate glass and (b) eliminating the use of carbonate batch materials. The viscosity curve of LionGlass is shifted downward in temperature compared to soda lime silicate glass, enabling melting at much lower temperatures. LionGlass also has significantly improved resistance to crack initiation compared to soda lime silicate glass. Other properties, such as thermal expansion coefficient and optical dispersion curve, are comparable to those of traditional soda lime silicate glass.

Lion-Glass↗

Debye-Scherrer investigations of experimentally shocked silicates.

Small ballistic ranges were used to perform controlled laboratory shock experiments on 12 selected silicates. Debye-Scherrer investigations of shocked materials revealed a gradual lattice breakdown of crystalline matter under shock. Individual mineral species behave selectively. Sheet silicates break down very easily, followed by tecto-silicates. Chain-, ino- and ortho-silicates are of considerably higher shock resistance. Depending on the mineral species, the first sign of shock damage is evidenced in the long range order at 20-70 kb. At intermediate pressures (100-200 kb) the long range order is essentially destroyed with the short range order heavily disturbed. At pressures exceeding 300 kb tecto-silicates are completely collapsed.

Hoerz, F.↗

Experimental investigation of the partitioning of phosphorus between metal and silicate phases - Implications for the earth, moon and eucrite parent body

An experimental study is reported of the partitioning of Phosphorus between solid metal and basaltic silicate liquid as a function of temperature and oxygen fugacity and of the implications for the earth, moon and eucrite parent body (EPB). The relationship established between the partition coefficient and the fugacity is given at 1190 C by log D(P) = -1.12 log fO2 - 15.95 and by log D(P) = -1.53 log fO2 17.73 at 1300 C. The partition coefficient D(P) was determined, and it is found to be consistent with a valence state of 5 for P in the molten silicate. Using the determined coefficient the low P/La ratios of the earth, moon, and eucrites relative to C1 chondrites can be explained. The lowering of the P/La ratio in the eucrites relative to Cl chondrite by a factor of 40 can be explained by partitioning P into 20-25 wt% sulfur-bearing metallic liquid corresponding to 5-25% of the total metal plus silicate system. The low P/La and W/La ratios in the moon may be explained by the partitioning of P and W into metal during formation of a small core by separation of liquid metal from silicate at low degrees of partial melting of the silicates. These observations are consistent with independent formation of the moon and the earth.

Newsom, H. E.↗

The identification of crystalline olivine in cometary silicates

An intermediate-resolution spectrum of the 8-13 micron region in comet Halley is obtained which shows a prominent silicate emission feature with structure not observed before in other comets or in interstellar silicates. The presence of a strong 11.3 micron peak reported by Bregman and coworkers is confirmed, and evidence is found for additional structure in the band. By comparison with spectra of interplanetary dust particles and laboratory silicates, it is concluded that small crystalline olivine particles are a major component of the silicates in this comet; other silicates (e.g., amorphous or hydrated) must also be present. The identification of crystalline olivine in this part of the spectrum is supported by the observation of four peaks in 20-50 micron airborne spectra of this comet which have also been attributed to olivine.

Campins, Humberto↗