Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHEAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Investigation of interfacial shear strength in a SiC fibre/Ti-24Al-11Nb composite by a fibre push-out technique

A fiber push-out technique applied at several sample thicknesses was used to determine both the debond shear stress and the frictional shear stress at the fiber-matrix interface at room temperautre for a unidirectional SiC fiber-reinforced T-24Al-11Nb (in at. pct) composite prepared by a powder cloth technique. The push-out technique measures the separate contributions of bond strength and friction to the mechanical shear strength at the fiber-matrix interface. It was found that the fiber-matrix bond shear strength of this material is significantly higher than the fiber-matrix frictional shear stress (119.2 and 47.8 MPa, respectively).

Eldridge, J. I.↗
NASA NTRS1990

Effects of organized turbulence structures on the phase distortion in a coherent optical beam propagating through a turbulent shear flow

Phase distortion in a coherent optical beam propagating through a turbulent shear flow is studied. The instantaneous distribution of the index refraction is represented by a passive-scalar field in a computed homogeneous shear flow. The flow contains organized vortical structures (hairpin eddies), which are characteristic of turbulent shear flows. The phase distortion induced by turbulent fluctuations is calculated from the optical path difference through the flow. A conceptual model is proposed for the distribution of scalar fluctuations produced by the hairpin vortices in the shear flow. It is shown that the phase distortion of an optical beam can be minimized by propagating the beam at an angle approximately normal to the organized vortical structures in a turbulent shear flow.

Truman, C. Randall↗
NASA NTRS1990

Shear-induced inflation of coronal magnetic fields

Using numerical models of force-free magnetic fields, the shearing of footprints in arcade geometries leading to an inflation of the coronal magnetic field was examined. For each of the shear profiles considered, all of the field lines become elevated compared with the potential field. This includes cases where the shear is concentrated well away from the arcade axis, such that B(sub z), the component of field parallel to the axis, increases outward to produce an inward B(sub z) squared/8 pi magnetic pressure gradient force. These results contrast with an earlier claim, shown to be incorrect, that field lines can sometimes become depressed as a result of shear. It is conjectured that an inflation of the entire field will always result from the shearing of simple arcade configurations. These results have implications for prominence formation, the interplanetary magnetic flux, and possibly also coronal holes.

Klimchuk, James A.↗
NASA NTRS1990

The effects of transverse shearing and anisotropy on vibration frequencies of laminated cylinders

The natural vibration frequencies of orthotropic and anisotropic, simply supported right circular cylinders are predicted using a theory which takes into account higher-order transverse shear deformation effects. A comparison between results based on first-order transverse shear deformation theory and the higher-order theory indicates that an additional allowance for transverse shear deformation has a negligible effect on the predicted natural vibration frequencies associated with long wavelengths, but significantly reduces the natural vibration frequencies associated with short wavelengths. Results of a parametric study of ply orientation for two classes of laminates indicates that while stacking sequence affects natural vibration frequencies, cylinder geometry and mode shape are more important in accurately predicting transverse shear deformation effects. Transverse shearing effects are less important in predicting natural vibration frequencies associated with long wavelength than in predicting axial compressive buckling loads.

Jegley, D. C.↗
NASA NTRS1990

Application of a Reynolds stress turbulence model to the compressible shear layer

Theoretically based turbulence models have had success in predicting many features of incompressible, free shear layers. However, attempts to extend these models to the high-speed, compressible shear layer have been less effective. In the present work, the compressible shear layer was studied with a second-order turbulence closure, which initially used only variable density extensions of incompressible models for the Reynolds stress transport equation and the dissipation rate transport equation. The quasi-incompressible closure was unsuccessful; the predicted effect of the convective Mach number on the shear layer growth rate was significantly smaller than that observed in experiments. Having thus confirmed that compressibility effects have to be explicitly considered, a new model for the compressible dissipation was introduced into the closure. This model is based on a low Mach number, asymptotic analysis of the Navier-Stokes equations, and on direct numerical simulation of compressible, isotropic turbulence. The use of the new model for the compressible dissipation led to good agreement of the computed growth rates with the experimental data. Both the computations and the experiments indicate a dramatic reduction in the growth rate when the convective Mach number is increased. Experimental data on the normalized maximum turbulence intensities and shear stress also show a reduction with increasing Mach number.

Sarkar, S.↗
NASA NTRS1990

Behaviour of plate elements based on the first-order shear deformation theory

A new analytical technique to assess the performance of shear deformable elements is presented, which makes it possible to determine a priori whether a given element will lock when used to model thin structures. The role that shear constraints play in determining the behavior of thin elements was established by comparing the results of key numerical tests with the predictions of element behavior made by studying the form of the shear constraints. Conclusions regarding locking behavior and the effects of reduced integration in thin shear deformable elements are presented, including the findings (1) that singularity of the shear stiffness matrix is not sufficient to avoid locking; (2) that the effect of mesh refinement on an element that contains spurious constraints is two-fold; and (3) that reduced integration does not remove spurious constraints but rather relaxes them. The results of the study are in agreement with previous studies of Mindlin plate elements in regarding Lagrangian elements as superior to serendipity elements when either full or reduced integration is employed.

Averill, R. C.↗
NASA NTRS1990

Structure of turbulence at high shear rate

The structure of homogeneous turbulence subject to high shear rate has been investigated by using three-dimensional, time-dependent numerical simulations of the Navier-Stokes equations. This study indicates that high shear rate alone is sufficient for generation of the streaky structures, and that the presence of a solid boundary is not necessary. Evolution of the statistical correlations is examined to determine the effect of high shear rate on the development of anisotropy in turbulence. It is shown that the streamwise fluctuating motions are enhanced so profoundly that a highly anisotropic turbulence state with a 'one-component' velocity field and 'two-component' vorticity field develops asymptotically as total shear increases. Because of high-shear rate, rapid distortion theory predicts remarkably well the anisotropic behavior of the structural quantities.

Lee, Moon Joo↗
NASA NTRS1990

Parametric analysis of swept-wing geometry with sheared wing tips

A computational parameter study is presented of potential reductions in induced drag and increases in lateral-directional stability due to sheared wing tips attached to an untwisted wing of moderate sweep and aspect ratio. Sheared tips are swept and tapered wing-tip devices mounted in the plane of the wing. The induced-drag results are obtained using an inviscid, incompressible surface-panel method that models the nonlinear effects due to the deflected and rolled-up wake behind the lifting surface. The induced-drag results with planar sheared tips are compared to straight-tapered tip extensions and nonplanar winglet geometries. The lateral-directional static-stability characteristics of the wing with sheared tips are estimated using a quasi-vortex-lattice method. For certain combinations of sheared-tip sweep and taper, both the induced efficiency of the wing and the relevant static-stability derivatives are predicted to increase compared to the wing with a straight-tapered tip modification.

Fremaux, C. M.↗
NASA NTRS1991

A novel method of testing the shear strength of thick honeycomb composites

Sandwich composites of aluminum and glass/phenolic honeycomb core were tested for shear strength before and after impact damage. The assessment of shear strength was performed in two ways; by four point bend testing of sandwich beams and by a novel double lap shear (DLS) test. This testing technique was developed so smaller specimens could be used, thus making the use of common lab scale fabrication and testing possible. The two techniques yielded similar data. The DLS test gave slightly lower shear strength values of the two methods but were closer to the supplier's values for shear strength.

Hodge, A. J.↗
NASA NTRS1991

The shear modulus of the neutron star crust and nonradial oscillations of neutron stars

Shear moduli are calculated for bcc crystalline and rapidly quenched Coulomb solids produced by the Monte Carlo simulation method. The shear moduli are calculated up to the transition temperature and include the effects of thermal fluctuations. An effective shear modulus appropriate to an approximate 'isotropic' body is introduced. It is found that the values of the 'average shear modulus' for the quenched solids remain about the same as those for the corresponding bcc crystals, although the individual shear moduli of the former, disordered solids deviate considerably from the cubic symmetry of the latter. These results are applied to analyses of neutron star oscillations. It is found that the periods of the two interfacial modes are increased by about 10 percent compared to previous results, and that s-mode periods are increased by about 30 percent. The periods of the f and p modes are hardly affected at all. The surface g-mode periods are not greatly affected, while the t-mode periods are increased by 20-25 percent.

Strohmayer, T.↗
NASA NTRS1991

Turbulization of shear flows in astrophysics

The problem of instability in shear flows is treated in a number of works which present a global analysis of irrotational (potential) modes in a 2-D compressible shear flow, implying that, in the presence of reflecting boundaries, those modes can increase and that the characteristic time of the increase is several orders as high as the dynamic time in the medium. Due to the slowness of the increase of irrotational modes and to the problematic character of the theory's applicability for thin accretion disks, an attempt was made to develop an alternative theory of turbulization shear flows. It is quite contrary to the above theory. Instead of the global analysis, a local one is made far from the flow boundaries. Instead of irrotational perturbations, vortical ones are examined. Lastly, the medium is considered to be incompressible. The flow in the accretion disk can be modeled by a plane Couette flow, without regard for boundary conditions: it can be modeled by a plane shear flow in infinite incompressible fluid. According to this scenario, there is a critical perturbation level in the free shear flow. If the level of initial perturbations exceeds the critical one, the flow is turbulized.

Chagelishvili, G. D.↗
NASA NTRS1991

A comparison of three popular test methods for determining the shear modulus of composite materials

Three popular shear tests (the 10 degree off-axis, the plus or minus 45 degree tensile, and the Iosipescu specimen tested in the modified Wyoming fixture) for shear modulus measurement are evaluated for a graphite-epoxy composite material system. A comparison of the shear stress-strain response for each test method is made using conventional strain gage instrumentation and moire interferometry. The uniformity and purity of the strain fields in the test sections of the specimens are discussed, and the shear responses obtained from each test technique are presented and compared. For accurate measurement of shear modulus, the 90 degree Iosipescu specimen is recommended.

Ho, Henjen↗
NASA NTRS1992

Real-time decision aiding - Aircraft guidance for wind shear avoidance

Modern control theory and artificial intelligence technology are applied to the Wind Shear Safety Advisor, a conceptual airborne advisory system to help flight crews avoid or survive encounter with hazardous low-altitude wind shear. Numerical and symbolic processes of the system fuse diverse, time-varying data from ground-based and airborne measurements. Simulated wind-shear-encounter scenarios illustrate the need to consider a variety of factors for optimal decision reliability. The wind-shear-encounter simulations show the Wind Shear Safety Advisor's potential for effectively integrating the available information, highlighting the benefits of the computational techniques employed.

Stratton, D. A.↗
NASA NTRS1991

A comparison of three shear test methods for composite materials

A graphite-epoxy composite material system is used to evaluate the performance of three popular shear tests - the 10-deg off-axis, the +/-45-deg tension, and the Iosipescu specimen tested in the modified Wyoming fixture. A comparison of the shear stress-strain response for each test method is made using a conventional strain gage instrument and moire interferometry. The uniformity and purity of the strain fields in the test sections of the specimens are discussed, and the shear responses obtained from each test are presented and compared. It is shown that the shear stress-strain responses obtained by instrumenting only one face of the 90-deg Iosipescu specimen could give erroneous results. The +/-45-deg tensile and 0-deg Iosipescu specimens were not affected by front-to-back face shear strain variations. Correction factors could be applied to bring all responses together, within the limits of the material uniformity, which was itself documented in the moire fringe patterns.

Ho, H.↗
NASA NTRS1991

An evaluation of the +/-45 deg tensile test for the determination of the in-plane shear strength of composite materials

The applicability of the +/-45 deg tensile test for the determination of the in-plane shear strength of advanced composite laminates is studied. The assumptions used for the development of the shear strength formulas were examined, and factors such as the specimen geometry and stacking sequence were assessed experimentally. It was found that the strength of symmetric and balanced +/-45 deg laminates depends primarily upon the specimen thickness rather than the specimen width. These findings have important implications for the +/-45 deg tensile test which is recommended by several organizations for the determination of the in-plane shear stress/strain response and the shear strength of continuous fiber reinforced composites. Modifications to the recommended practices for specimen selection and shear strength determination are suggested.

Kellas, S.↗
NASA NTRS1993

A comparison of three popular test methods for determining the shear modulus of composite materials

Three popular shear tests - the 10 deg off-axis, the +/- 45 deg tensile and the Iosipescu specimen tested in the modified Wyoming fixture - for shear modulus measurement are evaluated for a graphite-epoxy composite material system. A comparison of the shear stress-strain response for each test method is made using conventional strain gage instrumentation and moire interferometry. The uniformity and purity of the strain fields in the test sections of the specimens are discussed, and the shear responses obtained from each test technique are presented and compared. For accurate measurement of the shear modulus, the 90 deg Iosipescu specimen is recommended.

Ho, H.↗
NASA NTRS1992

Air/ground wind shear information integration: Flight test results

An element of the NASA/FAA wind shear program is the integration of ground-based microburst information on the flight deck, to support airborne wind shear alerting and microburst avoidance. NASA conducted a wind shear flight test program in the summer of 1991 during which airborne processing of Terminal Doppler Weather Radar (TDWR) data was used to derive microburst alerts. High level microburst products were extracted from TDWR, transmitted to a NASA Boeing 737 in flight via data link, and processed to estimate the wind shear hazard level (F-factor) that would be experienced by the aircraft in the core of each microburst. The microburst location and F-factor were used to derive a situation display and alerts. The situation display was successfully used to maneuver the aircraft for microburst penetrations, during which in situ 'truth' measurements were made. A total of 19 penetrations were made of TDWR-reported microburst locations, resulting in 18 airborne microburst alerts from the TDWR data and two microburst alerts from the airborne in situ measurements. The primary factors affecting alerting performance were spatial offset of the flight path from the region of strongest shear, differences in TDWR measurement altitude and airplane penetration altitude, and variations in microburst outflow profiles. Predicted and measured F-factors agreed well in penetrations near microburst cores. Although improvements in airborne and ground processing of the TDWR measurement would be required to support an airborne executive-level alerting protocol, the feasibility of airborne utilization of TDWR data link data has been demonstrated.

Hinton, David A.↗
NASA NTRS1992

Vibration of compressively loaded shear deformable flat panels exhibiting initial geometric imperfections

Numerical study results are presented which indicate that, in the prebuckling range, the natural frequency predicted by the shear-deformable plate theory is smaller than that associated with its transverse-shear rigid counterpart. The opposite behavior occurs in the postbuckling/postcritical range. With increasing transverse shear flexibility, greater differences between frequencies predicted by shear deformation and infinitely rigid transverse shear theories emerge. The character of in-plane boundary conditions is a determinant of both increasing/decreasing buckling loads and increasing/decreasing vibratory frequencies.

Librescu, L.↗