Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCANDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

General active space commutator-based coupled cluster theory of general excitation rank for electronically excited states: Implementation and application to ScH

We present a new implementation of general excitation rank coupled cluster theory for electronically excited states based on the single-reference multi-reference formalism. The method may include active-space selected and/or general higher excitations by means of the general active space concept. It may employ molecular integrals over the four-component Lévy-Leblond Hamiltonian or the relativistic spin-orbit-free four-component Hamiltonian of Dyall. In an initial application to ground- and excited states of the scandium monohydride molecule we report spectroscopic constants using basis sets of up to quadruple-zeta quality and up to full iterative triple excitations in the cluster operators. Effects due to spin-orbit interaction are evaluated using two-component multi-reference configuration interaction for assessing the accuracy of the coupled cluster results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical phonon modes in Al{sub 1−x}Sc{sub x}N

Optical phonons are measured to probe the origins of the reported anomalously high piezoelectric response in aluminum scandium nitride (Al{sub 1−x}Sc{sub x}N). Epitaxial layers with 0 ≤ x ≤ 0.16 deposited on sapphire(0001) exhibit a refractive index below the band gap, which increases from 2.03 for x = 0 to 2.16 for x = 0.16, corresponding to a dielectric constant ε{sub ∞} = 4.15 + 3.2x. Raman scattering shows that zone-center E{sub 2}(H) and A{sub 1}(TO) phonon modes shift to lower frequencies with increasing x, following linear relationships: ω(E{sub 2}(H)) = 658–233x (cm{sup −1}) and ω(A{sub 1}(TO)) = 612–159x (cm{sup −1}). Similarly, zone-center E{sub 1}(TO) and A{sub 1}(LO) phonon mode frequencies obtained from specular polarized infrared reflectance measurements red-shift to ω(E{sub 1}(TO)) = 681–209x (cm{sup −1}) and ω(A{sub 1}(LO)) = 868–306x (cm{sup −1}). The measured bond angle decreases linearly from 108.2° to 106.0°, while the length of the two metal-nitrogen bonds increase by 3.2% and 2.6%, as x increases from 0 to 0.16. This is associated with a 3%–8% increase in the Born effective charge and a simultaneous 6% decrease in the covalent metal-N bond strength, as determined from the measured vibrational frequencies described with a Valence-Coulomb-Force-Field model. The overall results indicate that bonding in Al-rich Al{sub 1−x}Sc{sub x}N qualitatively follows the trends expected from mixing wurtzite AlN with metastable hexagonal ScN. However, extrapolation suggests non-linear composition dependencies in bond angle, length, and character for x ≥ 0.2, leading to a structural instability that may be responsible for the reported steep increase in the piezoelectric response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The impact of argon admixture on the c-axis oriented growth of direct current magnetron sputtered Sc{sub x}Al{sub 1−x}N thin films

The piezoelectric properties of wurtzite aluminium nitride (w-AlN) are enhanced by alloying with scandium (Sc), thus offering superior properties for applications in micro electro-mechanical systems devices. Sc{sub x}Al{sub 1−x}N thin films have been prepared by DC reactive magnetron sputtering on Si (100) substrates from a single target. When targeting a concentration range from x = 0 up to x = 0.15, the preparation conditions have been optimized by varying the Ar/N{sub 2} ratio in the sputtering gas. To incorporate an increasing Sc concentration, a higher Ar/N{sub 2} ratio has to be applied during the deposition process. Hence, the argon concentration in the sputtering gas becomes a crucial parameter for microstructure-related parameters. To determine phase purity, degree of c-axis orientation, lattice parameter, and grain size, the Sc{sub x}Al{sub 1−x}N thin films were investigated by techniques, such as scanning electron microscopy, transmission electron microscopy, and X-ray diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and vibrational properties of single crystals of Scandia, Sc{sub 2}O{sub 3} under high pressure

We report the results of single-crystal X-ray diffraction and Raman spectroscopy studies of scandium oxide, Sc{sub 2}O{sub 3}, at ambient temperature under high pressure up to 55 and 28 GPa, respectively. Both X-ray diffraction and Raman studies indicated a phase transition from the cubic bixbyite phase (so-called C-Res phase) to a monoclinic C2/m phase (so-called B-Res phase) at pressures around 25–28 GPa. The transition was accompanied by a significant volumetric drop by ∼6.7%. In addition, the Raman spectroscopy detected a minor crossover around 10–12 GPa, which manifested in the appearance of new and disappearance of some Raman modes, as well as in softening of one Raman mode. We found the bulk modulus values of the both C-Res and B-Res phases as B{sub 0} = 198.2(3) and 171.2(1) GPa (for fixed B′ = 4), respectively. Thus, the denser high-pressure lattice of Sc{sub 2}O{sub 3} is much softer than the original lattice. We discuss possible mechanisms that might be responsible for the pronounced elastic softening in the monoclinic high-pressure phase in this “simple” oxide with an ultra-wide band gap.

36 MATERIALS SCIENCE↗

Features and regularities in behavior of thermoelectric properties of rare-earth, transition, and other metals under high pressure up to 20 GPa

We report results of systematic investigations of the thermoelectric properties of a number of rare-earth metals, transition metals, and other metals under high pressure up to 20 GPa at room temperature. We studied an effect of applied pressure on the Seebeck effect of scandium (Sc), yttrium (Y), lanthanum (La), europium (Eu), ytterbium (Yb), iron (Fe), manganese (Mn), chromium (Cr), gold (Au), tin (Sn), and CeNi alloy. We found that the high-pressure behavior of the thermopower of three rare-earth metals, namely, Sc, Y, and La, follows a general trend that has been established earlier in lanthanides, and addressed to a s → d electron transfer. Europium and ytterbium, on the contrary, showed a peculiar high-pressure behavior of the thermopower with peaks at near 0.7–1 GPa for Eu and 1.7–2.5 GPa for Yb. Chromium, manganese, and tin demonstrated a gradual and pronounced lowering of the absolute value of the thermopower with pressure. Above 9–11 GPa, the Seebeck coefficients of Mn and Sn were inverted, from n- to p-type for Mn and from p- to n-type for Sn. The Seebeck effect in iron was rather high as ∼16 μV/K and weakly varied with pressure up to ∼11 GPa. Above ∼11 GPa, it started to drop dramatically with pressure to highest pressure achieved 18 GPa. Upon decompression cycle the thermopower of iron returned to the original high values but demonstrated a wide hysteresis loop. We related this behavior in iron to the known bcc (α-Fe) → hcp (ε-Fe) phase transition, and proposed that the thermoelectricity of the α-Fe phase is mainly contributed by the spin Seebeck effect, likewise, the thermoelectricity of the ε-Fe phase—by the conventional diffusion thermopower. We compare the pressure dependencies of the thermopower for different groups of metals and figure out some general trends in the thermoelectricity of metals under applied stress.

36 MATERIALS SCIENCE↗

Size effects on negative thermal expansion in cubic ScF{sub 3}

Scandium trifluoride (ScF{sub 3}), adopting a cubic ReO{sub 3}-type structure at ambient pressure, undergoes a pronounced negative thermal expansion (NTE) over a wide range of temperatures (10 K–1100 K). Here, we report the size effects on the NTE properties of ScF{sub 3}. The magnitude of NTE is reduced with diminishing the crystal size. As revealed by the specific heat measurement, the low-energy phonon vibrations which account for the NTE behavior are stiffened as the crystal size decreases. With decreasing the crystal size, the peaks in high-energy X-ray pair distribution function (PDF) become broad, which cannot be illuminated by local symmetry breaking. Instead, the broadened PDF peaks are strongly indicative of enhanced atomic displacements which are suggested to be responsible for the stiffening of NTE-related lattice vibrations. The present study suggests that the NTE properties of ReO{sub 3}-type and other open-framework materials can be effectively adjusted by controlling the crystal size.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electric-field-induced crossover of polarization reversal mechanisms in Al 1–x Sc x N ferroelectrics

Scandium-doped aluminum nitride, Al 1–x Sc x N, represents a new class of displacive ferroelectric materials with high polarization and sharp hysteresis along with high-temperature resilience, facile synthesizability and compatibility with standard CMOS fabrication techniques. The fundamental physics behind the transformation of unswitchable piezoelectric AlN into switchable Al–Sc–N ferroelectrics depends upon important atomic properties such as local structure, dopant distributions and the presence of competing mechanism of polarization switching in the presence of an applied electric-field that have not been understood. We computationally synthesize Al 1–x Sc x N to quantify the inhomogeneity of Sc distribution and phase segregation, and characterize its crystal and electronic structure as a function of Sc-doping. Nudged elastic band calculations of the potential energy surface and quantum molecular dynamics simulations of direct electric-field-driven ferroelectric switching reveal a crossover between two polarization reversal mechanisms—inhomogeneous nucleation-and-growth mechanism originating near Sc-rich regions in the limit of low applied fields and nucleation-limited-switching in the high-field regime. Finally, understanding polarization reversal pathways for these two mechanisms as well as the role of local Sc concentration on activation barriers provides design rules to identify other combinations of dopant elements, such as Zr, Mg etc. to synthesize superior AlN-based ferroelectric materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ab initio study of H and He migrations in β-phase Sc, Y, and Er hydrides

Ab initio calculations based on the density functional theory have been performed to investigate the migrations of hydrogen (H) and helium (He) atoms in {beta}-phase scandium (Sc), yttrium (Y), and erbium (Er) hydrides with three different ratios of H to metal. The results show that the migration mechanisms of H and He atoms mainly depend on the crystal structures of hydrides, but their energy barriers are affected by the host-lattice in metal hydrides. The formation energies of octahedral-occupancy H (H{sub oct}) and tetrahedral vacancy (V{sub tet}) pairs are almost the same (about 1.2 eV). It is of interest to note that the migration barriers of H increase with increasing host-lattice atomic number. In addition, the results show that the favorable migration mechanism of He depends slightly on the V{sub tet} in the Sc hydride, but strongly on that in the Y and Er hydrides, which may account for different behaviours of initial He release from ScT{sub 2} and ErT{sub 2}.

08 HYDROGEN↗

METALS IN THE EXOSPHERE OF THE HIGHLY IRRADIATED PLANET WASP-12b

We present near-UV transmission spectroscopy of the highly irradiated transiting exoplanet WASP-12b, obtained with the Cosmic Origins Spectrograph on the Hubble Space Telescope. The spectra cover three distinct wavelength ranges: NUVA (2539-2580 A), NUVB (2655-2696 A), and NUVC (2770-2811 A). Three independent methods all reveal enhanced transit depths attributable to absorption by resonance lines of metals in the exosphere of WASP-12b. Light curves of total counts in the NUVA and NUVC wavelength ranges show a detection at a 2.5{sigma} level. We detect extra absorption in the Mg II {lambda}{lambda}2800 resonance line cores at the 2.8{sigma} level. The NUVA, NUVB, and NUVC light curves imply effective radii of 2.69 {+-} 0.24 R {sub J}, 2.18 {+-} 0.18 R {sub J}, and 2.66 {+-} 0.22 R {sub J} respectively, suggesting the planet is surrounded by an absorbing cloud which overfills the Roche lobe. We detect enhanced transit depths at the wavelengths of resonance lines of neutral sodium, tin, and manganese, and at singly ionized ytterbium, scandium, manganese, aluminum, vanadium, and magnesium. We also find the statistically expected number of anomalous transit depths at wavelengths not associated with any known resonance line. Our data are limited by photon noise, but taken as a whole the results are strong evidence for an extended absorbing exosphere surrounding the planet. The NUVA data exhibit an early ingress, contrary to model expectations; we speculate this could be due to the presence of a disk of previously stripped material.

79 ASTRONOMY AND ASTROPHYSICS↗

New framework hydrous silicate K{sub 3}Sc[Si{sub 3}O{sub 9}] {center_dot} H{sub 2}O related to the high-temperature anhydrous silicate K{sub 3}Ho[Si{sub 3}O{sub 9}] and symmetry analysis of a phase transition with prediction of structures

Crystals of a new framework silicate K{sub 3}Sc[Si{sub 3}O{sub 9}] {center_dot} H{sub 2}O, space group Pm2{sub 1}n (nonstandard setting of space group Pmn2{sub 1} = C{sub 2v}{sup 7}), are obtained under hydrothermal conditions. The structure is determined without preliminary knowledge of the chemical formula. The absolute configuration is determined. The structure is close to that of the high-temperature K{sub 3}Ho[Si{sub 3}O{sub 9}] phase, which was obtained upon the heating of K{sub 3}HoSi{sub 3}O{sub 8}(OH){sub 2}. This structural similarity is due to the specific conditions of synthesis and an analogous formula, where holmium is replaced by scandium. A symmetry analysis shows that the high local symmetry of a block (rod) is responsible for the first-order phase transition of both the order-disorder (OD) and displacement type. The number of structures in which the simplest and high-symmetry layers are multiplied by different symmetry elements are predicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polymorphism of ScBO{sub 3} at the Solid Phase Synthesis from Amorphous Precursors

Detailed X-ray studies of changes in the structure of the scandium orthoborate ScBO{sub 3} in the process of serial isothermal annealing of the initial charge in the form of amorphous precursor were carried out. It was shown that upon successive annealing of the amorphous precursor, the crystalline phase first forms at an annealing temperature of 710°C, the positions of the reflections of which do not coincide with the positions that of the known calcite structure. This phase exists in a very narrow temperature range (≈30°C) and, when the annealing temperature is increased to 750°C, it completely transfers to the known rhombohedral phase of calcite. Using the ENDEAVOR software, the cell parameters, atom positions in the cell, and the spatial symmetry group of the new phase were determined. It turned out that the new phase corresponds to the hexagonal structure of the faterite (S.G. P63/mmc), known for other orthoborates of rare-earth elements (REE).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tri-material multilayer coatings with high reflectivity and wide bandwidth for 25 to 50 nm extreme ultraviolet light

Magnesium/silicon carbide (Mg/SiC) multilayers have been fabricated with normal incidence reflectivity in the vicinity of 40% to 50% for wavelengths in the 25 to 50 nm wavelength range. However many applications, for example solar telescopes and ultrafast studies using high harmonic generation sources, desire larger bandwidths than provided by high reflectivity Mg/SiC multilayers. We investigate introducing a third material, Scandium, to create a tri-material Mg/Sc/SiC multilayer allowing an increase the bandwidth while maintaining high reflectivity.

36 MATERIALS SCIENCE↗

High Yield, Economical and Environmentally Benign Production of Rare Earth Elements from Coal Ash [Abstract]

Fly ash stored in landfills and ponds across the United States is an attractive, abundant domestic resource for the cost-effective recovery of rare earth elements (REE) and other critical minerals (CM). Physical Sciences Inc. (PSI) and its team members, Winner Water Services (WWS) and University of Kentucky/Center for Applied Energy Research (UK/CAER) successfully executed a multiphase program that developed and demonstrated pilot plant operations for cost-effective and environmentally-friendly production of rare earth element oxide (REO) concentrates, and the critical minerals scandium and aluminum (in the forms of salts or oxide products). We constructed and operated a sub-scale (0.5 kg/day) micropilot facility to demonstrate the key physical and chemical processing operations, predict yields, and troubleshoot process bottlenecks. The project team then designed, constructed and operated two decoupled pilot plant operations: (1) an operational pilot plant for physical separation processes with a capacity of 0.4 metric tons per day (tpd) where we optimized processes to produce selected ash fractions as the feedstock for chemical processing as well as valuable byproducts such as cement substitute, cenospheres, magnetic ash and secondary fuel carbon, and (2) an operational pilot plant for chemical processing with a capacity of 0.5 tpd that developed optimized processes for the production of: (a) REO concentrates, (b) critical minerals recovery (Sc, Al), and (c) beneficiated ash as valuable byproduct suitable for cement applications.

01 COAL, LIGNITE, AND PEAT↗

Issues associated with the metalorganic chemical vapor deposition of ScGaN and YGaN alloys.

The most energy efficient solid state white light source will likely be a combination of individually efficient red, green, and blue LED. For any multi-color approach to be successful the efficiency of deep green LEDs must be significantly improved. While traditional approaches to improve InGaN materials have yielded incremental success, we proposed a novel approach using group IIIA and IIIB nitride semiconductors to produce efficient green and high wavelength LEDs. To obtain longer wavelength LEDs in the nitrides, we attempted to combine scandium (Sc) and yttrium (Y) with gallium (Ga) to produce ScGaN and YGaN for the quantum well (QW) active regions. Based on linear extrapolation of the proposed bandgaps of ScN (2.15 eV), YN (0.8 eV) and GaN (3.4 eV), we expected that LEDs could be fabricated from the UV (410 nm) to the IR (1600 nm), and therefore cover all visible wavelengths. The growth of these novel alloys potentially provided several advantages over the more traditional InGaN QW regions including: higher growth temperatures more compatible with GaN growth, closer lattice matching to GaN, and reduced phase separation than is commonly observed in InGaN growth. One drawback to using ScGaN and YGaN films as the active regions in LEDs is that little research has been conducted on their growth, specifically, are there metalorganic precursors that are suitable for growth, are the bandgaps direct or indirect, can the materials be grown directly on GaN with a minimal defect formation, as well as other issues related to growth. The major impediment to the growth of ScGaN and YGaN alloys was the low volatility of metalorganic precursors. Despite this impediment some progress was made in incorporation of Sc and Y into GaN which is detailed in this report. Primarily, we were able to incorporate up to 5 x 10{sup 18} cm{sup -3} Y atoms into a GaN film, which are far below the alloy concentrations needed to evaluate the YGaN optical properties. After a no-cost extension was granted on this program, an additional more 'liquid-like' Sc precursor was evaluated and the nitridation of Sc metals on GaN were investigated. Using the Sc precursor, dopant level quantities of Sc were incorporated into GaN, thereby concluding the growth of ScGaN and YGaN films. Our remaining time during the no-cost extension was focused on pulsed laser deposition of Sc metal films on GaN, followed by nitridation in the MOCVD reactor to form ScN. Finally, GaN films were deposited on the ScN thin films in order to study possible GaN dislocation reduction.

36 MATERIALS SCIENCE↗

Iron-group abundances in the metal-poor main-sequence turnoff star HD 84937

We have derived new, very accurate abundances of the Fe-group elements Sc through Zn (Z = 21−30) in the bright main-sequence turnoff star HD 84937 based on high-resolution spectra covering the visible and ultraviolet spectral regions. New or recent laboratory transition data for 14 species of seven elements have been used. Abundances from more than 600 lines of non-Fe species have been combined with about 550 Fe lines in HD 84937 to yield abundance ratios of high precision. The abundances have been determined from both neutral and ionized transitions, which generally are in agreement with each other. We find no substantial departures from the standard LTE Saha ionization balance in this [Fe/H] = −2.32 star. Noteworthy among the abundances are [Co/Fe] = +0.14 and [Cu/Fe] = −0.83, in agreement with past studies of abundance trends in this and other low-metallicity stars, and 〈[Sc,Ti,V/Fe]〉 = +0.31, which has not been noted previously. A detailed examination of scandium, titanium, and vanadium abundances in large-sample spectroscopic surveys reveals that they are positively correlated in stars with [Fe/H] < −2; HD 84937 lies at the high end of this correlation. These trends constrain the synthesis mechanisms of Fe-group elements. We also examine the Galactic chemical evolution abundance trends of the Fe-group elements, including a new nucleosynthesis model with jet-like explosion effects.

79 ASTRONOMY AND ASTROPHYSICS↗