Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reactive intermediates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Functionalized Hydroperoxide Formation from the Reaction of Methacrolein-Oxide, an Isoprene-Derived Criegee Intermediate, with Formic Acid: Experiment and Theory

Methacrolein oxide (MACR-oxide) is a four-carbon, resonance-stabilized Criegee intermediate produced from isoprene ozonolysis, yet its reactivity is not well understood. This study identifies the functionalized hydroperoxide species, 1-hydroperoxy-2-methylallyl formate (HPMAF), generated from the reaction of MACR-oxide with formic acid using multiplexed photoionization mass spectrometry (MPIMS, 298 K = 25 °C, 10 torr = 13.3 hPa). Electronic structure calculations indicate the reaction proceeds via an energetically favorable 1,4-addition mechanism. The formation of HPMAF is observed by the rapid appearance of a fragment ion at m/z 99, consistent with the proposed mechanism and characteristic loss of HO2 upon photoionization of functional hydroperoxides. The identification of HPMAF is confirmed by comparison of the appearance energy of the fragment ion with theoretical predictions of its photoionization threshold. The results are compared to analogous studies on the reaction of formic acid with methyl vinyl ketone oxide (MVK-oxide), the other four-carbon Criegee intermediate in isoprene ozonolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Isolation and Structural Elucidation of 15–Nuclear Copper Dihydride Clusters: An Intermediate in the Formation of a Two–Electron Copper Superatom

Highly reactive copper-dihydride clusters, [Cu 15 (H) 2 (S 2 CNR 2 ) 6 (C 2 Ph) 6 ](PF 6 ) {R = n Bu (1 H ), n Pr (2 H ), i Bu (3 H )}, are isolated during the reaction of [Cu 28 H 15 {S 2 CN n Bu 2 } 12 ](PF 6 ) with ten equivalents of phenylacetylene. They are found to be intermediates in the formation of the earlier reported two-electron superatom [Cu 13 (S 2 CNR 2 ) 6 (C 2 Ph) 4 ] + . Better yields are obtained by reacting dithiocarbamate sodium salts, [Cu(CH 3 CN) 4 ](PF 6 ), BH 4 – and phenylacetylene. The presence of two hydrides in the isolated clusters is confirmed by the synthesis and characterization of its deuteride analogue [Cu 15 (D) 2 (S 2 CNR 2 ) 6 (C 2 Ph) 6 ] + , and a single-crystal neutron structure of 2 H . Structural characterization of 1 H reveals a new bicapped icosahedral copper(I) cage encapsulating a linear copper dihydride (CuH 2 ) – unit. In conclusion, reaction of 3 H with Au(I) salts yields a highly luminescent [AuCu 12 (S 2 CNiBu 2 ) 6 (C 2 Ph) 4 ] + cluster.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Isomeric effects on the reactivity of branched alkenes: An experimental and kinetic modeling study of methylbutenes

Here, a detailed experimental study of the low-to-intermediate temperature combustion of methylbutene isomers, i.e., branched C 5 alkenes, has been undertaken with multiple experimental facilities. Ignition delay times were measured at equivalence ratios 0.5–2.0, 685–1020 K and up to 45 bar condition from two rapid compression machines and showed slight deviation from an Arrhenius behavior for all three isomers, while their reactivity order differs as temperature changes. Sampled intermediates formed during the oxidation process of mixtures at 900–1150 K and 0.82 bar from a flow reactor and at 730 K and 20 bar from a rapid compression machine were analyzed using gas chromatography techniques. Trends in the formation and consumption of sampled intermediates were modeled using a kinetic model developed in this work for all three isomers. Rate of production and sensitivity analyses emphasize the role of double bond-specific reactions governing the global reactivity of these fuels. Additional studies of the addition reactions of HO 2 radicals to the double bond and to allylic radicals may improve the model performance.

2-Methyl-1-butene↗
DOE OSTI2020

Stabilization of Photocatalytically Active Uranyl Species in a Uranyl–Organic Framework for Heterogeneous Alkane Fluorination Driven by Visible Light

When photoactivated, the uranyl ion is a robust oxidant capable of abstracting hydrogen atoms from nonactivated C–H bonds. Yet, the highly reactive singly reduced [U V O 2 ] + intermediate is unstable with respect to disproportionation to the uranyl dication and insoluble tetravalent uranium phases, which limits the usage of uranyl ions as robust photocatalysts. Herein, we demonstrate that photoactivated uranyl ions can be stabilized by immobilizing and separating them spatially in a uranyl–organic framework heterogeneous catalyst, NU-1301. The visible-light-photoactivated uranyl ions in NU-1301 demonstrated longer-lived U(V) and radicals than those in homogeneous counterparts, as evidenced by X-ray photoelectron spectroscopy and time-dependent electron paramagnetic resonance, leading to higher turnovers and enhanced stability for the fluorination of nonactivated alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Silica accelerates the selective hydrogenation of CO 2 to methanol on cobalt catalysts

The reaction pathways on supported catalysts can be tuned by optimizing the catalyst structures, which helps the development of efficient catalysts. Such design is particularly desired for CO 2 hydrogenation, which is characterized by complex pathways and multiple products. Here, we report an investigation of supported cobalt, which is known for its hydrocarbon production and ability to turn into a selective catalyst for methanol synthesis in CO 2 hydrogenation which exhibits good activity and stability. The crucial technique is to use the silica, acting as a support and ligand, to modify the cobalt species via Co-O-SiOn linkages, which favor the reactivity of spectroscopically identified *CH 3 O intermediates, that more readily undergo hydrogenation to methanol than the C-O dissociation associated with hydrocarbon formation. Cobalt catalysts in this class offer appealing opportunities for optimizing selectivity in CO 2 hydrogenation and producing high-grade methanol. By identifying this function of silica, we provide support for rationally controlling these reaction pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The role of transition metal formyl intermediates in the reduction of CO and CO 2

Transition-metal formyl (metalloformyl) complexes occupy a central position in the activation of small molecules, particularly in the reduction of carbon monoxide (CO) and carbon dioxide (CO 2 ). This review examines five decades of progress in the synthesis of metalloformyl complexes and investigations into their structure and reactivity. The bonding in the M–CHO unit is best described as a resonance hybrid between a classical σ-bound formyl ligand and an oxycarbene-like electronic structure, which governs their distinctive spectroscopic signatures and versatile reactivity. Established synthetic routes are summarized, including pathways involving hydride addition and CO insertion, alongside a discussion of the thermodynamic and kinetic factors that control formyl stability. Decomposition pathways and Lewis-acid stabilization strategies are analyzed as key design principles for extending metalloformyl lifetimes under catalytic conditions. Particular attention is given to hydride transfer processes and the role of metalloformyl intermediates as both reactive substrates and hydride sources in reduction chemistry. Lastly, emerging catalytic strategies that exploit metalloformyl intermediates in CO 2 and CO reduction are evaluated, highlighting how control of hydricity, redox potential, and secondary-sphere interactions enables selective C—H bond formation under comparatively mild conditions. Collectively, these studies establish metalloformyl complexes as mechanistically informative and functionally relevant intermediates that bridge fundamental organometallic chemistry with modern approaches to small-molecule activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modeling the Conformer-Dependent Electronic Absorption Spectra and Photolysis Rates of Methyl Vinyl Ketone Oxide and Methacrolein Oxide

Criegee intermediates are important atmospheric oxidants, formed via the reaction of ozone with volatile alkenes emitted into the troposphere. Small Criegee intermediates (e.g., CH 2 OO and CH 3 CHOO) are highly reactive, and their removal via unimolecular decay or bimolecular chemistry dominates their atmospheric lifetimes. As the molecular complexity of Criegee intermediates increases, their electronic absorption spectra show a bathochromic shift within the solar spectrum relevant to the troposphere. In such cases, solar photolysis may become a competitive contributor to their atmospheric removal. In this article, we report the conformer-dependent simulated electronic absorption spectra of two four-carbon-centered Criegee intermediates, methyl vinyl ketone oxide (MVK-oxide) and methacrolein oxide (MACR-oxide). Both MVK-oxide and MACR-oxide contain four low-energy conformers, which are convoluted in the experimentally measured spectra. Here, we deconvolute each conformer and estimate contributions from each of the four conformers to the experimentally measured spectra. We also estimate the photolysis rates and predict that solar photolysis should be a more competitive removal process for MVK-oxide and MACR-oxide (cf. CH 2 OO and CH 3 CHOO).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Computational Investigations of the Reactivity of Metalloporphyrins for Ammonia Oxidation

Density functional theory and molecular dynamics simulations were used to assess the ability of tetraphenylporphyrin (TPP)M complexes (where M = Cr, Mn, Fe, Co, Ni, Mo, Ru, W, and Os) to coordinate and weaken the N-H bonds of ammonia, as well as their reactivity towards N-N bond formation for N 2 generation. Compared to other metalloporphyrins, bis-ammonia complexes (TPP)Mo(NH 3 ) 2 and (TPP)W(NH 3 ) 2 exhibit low and level N-H BDFEs due to a stabilized (TPP)M(NH 3 )(NH) intermediate by multiple metal-ligand bonding. These results resemble those previously obtained for polypyridyl metal complexes, suggesting that broad trends in reactivity towards N-H bond cleavage are more metal-dependent rather than ligand-dependent for a metal in a nitrogen pseudo-octahedral environment. We investigated N-N bond formation via NH 3 nucleophilic attack on M-NH and M-N intermediates, compared to bimolecular coupling of M-NH x intermediates. We evaluated the reactivity of (TPP)Fe(NH 3 ) 2 towards N-N bond formation via a hydrazine pathway, and found amide-amide coupling to form a bridged hydrazido complex to be the most favorable pathway for N-N bond formation. Further investigation of possible N-N bond formation pathways by reaction with NH 3 led us to identify a possible Fe III -•NH species with significant aminyl character that bypasses the nucleophilic attack of NH 3 and that promotes homolytic N-H bond cleavage of ammonia. This reaction forms a Fe-NH 2 moiety and a transient •NH 2 radical that subsequently forms an N-N bond with the Fe-NH 2 moiety to form a (TPP)Fe(NH 3 )(N 2 H 4 ) species. Furthermore, these results indicate the need to evaluate the radical character of imido species and their reactivity towards N-H bond cleavage of ammonia.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Low-Temperature Pyrolysis of Aliphatic Polymers Using a Fluorinated Amorphous Silica–Alumina: Cooperative Reactivity between a Redox-Active Radical and an Aluminum Lewis Site

Fluorinated amorphous silica–alumina (F-ASA) prepared by the thermolysis of Krossing’s Al(OC(CF 3 ) 3 ) 3 (PhF) Lewis superacid supported on silica is a very reactive catalyst that promotes the pyrolysis (cracking) of aliphatic polymer melts to produce low molecular weight hyperbranched oils. Initial spectroscopic studies reported previously (Gao, J.; Perras, F. A.; Conley, M. P. J. Am. Chem. Soc . 2025 , 147, 18145–18154) showed that this material contains a distribution of four-, five-, and six-coordinate aluminum sites and a small amount of Brønsted acid sites, similar to typical amorphous silica–alumina materials that are far less reactive in the pyrolysis of aliphatic polymer melts. The objective of this study was to determine whether other active sites present in F-ASA could facilitate pyrolysis reactions. This study provides evidence for the presence of a redox-active silicon oxycarbide persistent radical ((≡Si) 3 C•) in F-ASA. Mims ENDOR EPR experiments show that (≡Si) 3 C• is located close to aluminum. Contacting F-ASA with thianthrene (Th) results in oxidation to form the [Th •+ ][F–ASA] ion-pair, while reactions with 1-hydroxy-2,2,6,6-tetramethylpiperidine (TEMPOH) result in H atom transfer to form TEMPO radical and F-ASA-H containing a mildly acidic (≡Si) 3 C–H. Poisoning studies show that both Lewis acidity and (≡Si) 3 C• are required for polymer pyrolysis reactivity. Finally, we propose that F-ASA promotes the formation of alkyl radicals in polymer melts, which are key intermediates in the thermal pyrolysis reactions of aliphatic polymers, involving the cooperative reactivity of both the Lewis acid and (≡Si) 3 C•.

aluminum↗
DOE OSTI2020

Computational and Experimental Mechanistic Insights into the Ethanol-to-Butanol Upgrading Reaction over MgO

The mechanism of ethanol upgrading to higher products is still under debate, especially regarding intermediate species and hydrogenation and dehydrogenation steps. In this work, we conducted a combined theoretical and experimental approach to contribute to this discussion. For such, detailed electronic structure density functional theory calculations (aiming at probing density of states, infrared spectra, geometric parameters, charge densities, and reaction energetics) and diffuse reflectance infrared Fourier transform spectroscopy experiments were carried out revealing the relevance of an appropriate combination of reactive surface sites to support the formation of several intermediates that are formed in the C-C coupling over MgO. The roles of Mg and O sites were also studied under an electronic perspective and different geometrical arrangements. We found that a kink configuration was the most adequate for ethanol to 1-butanol upgrading. Our calculations also gave us arguments to propose distinct reaction routes, whose mutual predominance would depend upon reaction temperature. At temperatures up to 573 K, the so-called β-route, which goes through scission of a Cβ-H bond and formation of an oxametallacycle-like intermediate, would dominate the coupling, whereas at higher temperatures, up to 673 K, a more usual Guerbet mechanism, via an aldol coupling step and then consecutive hydrogenations, would be expected. Here, the theoretical conclusions were followed by a careful experimental strategy using sequential experimental planning techniques in order to estimate accurate parameters with the lowest possible experimental load. Information from these different sources were coupled to develop a mathematical model for the rate of the ethanol upgrading reaction, using a Langmuir-Hinshelwood-Hougen-Watson approach. The developed and statistically validated model adequately described the experimental data at 673 K and 1.1 bar total pressure for ethanol partial pressures in the range from 0 to 20 kPa.

09 BIOMASS FUELS↗
DOE OSTI2020

Modulating Electrostatic Interactions in Ion Pair Intermediates To Alter Site Selectivity in the C−O Deoxygenation of Sugars

Abstract Controlling which products one can access from the predefined biomass‐derived sugars is challenging. Changing from CH 2 Cl 2 to the greener alternative toluene alters which C−O bonds in a sugar are cleaved by the tris(pentafluorophenyl)borane/HSiR 3 catalyst system. This increases the diversity of high‐value products that can be obtained through one‐step, high‐yielding, catalytic transformations of the mono‐, di‐, and oligosaccharides. Computational methods helped identify this non‐intuitive outcome in low dielectric solvents to non‐isotropic electrostatic enhancements in the key ion pair intermediates, which influence the reaction coordinate in the reactivity‐/selectivity‐determining step. Molecular‐level models for these effects have far‐reaching consequences in stereoselective ion pair catalysis.

Lowe, Jared M.↗
DOE OSTI2022

Ring-opening of a thorium cyclopropenyl complex generates a transient thorium-bound carbene

The reaction of [Cp 3 ThCl] with in situ generated 1-lithium-3,3-diphenylcyclopropene results in the formation of [Cp 3 Th(3,3-diphenylcyclopropenyl)] (1), in good yields. Thermolysis of 1 results in isomerization to the ring-opened product, [Cp 3 Th(3-phenyl-1H-inden-1-yl)] (3) via a hypothesized carbene intermediate. This transformation represents a new mode of reactivity of 3,3-diphenylcyclopropene with the actinides, improving our ability to use this reagent as a carbene source. Here, a combined DFT and 13 C{ 1 H} NMR analysis of 1 shows a spin–orbit induced downfield shift at C α due to participation of the 5f orbitals in the Th–C bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dynamics and activity of an ammonia-oxidizing archaea bloom in South San Francisco Bay

Abstract Transient or recurring blooms of ammonia-oxidizing archaea (AOA) have been reported in several estuarine and coastal environments, including recent observations of AOA blooms in South San Francisco Bay. Here, we measured nitrification rates, quantified AOA abundance, and analyzed both metagenomic and metatranscriptomic data to examine the dynamics and activity of nitrifying microorganisms over the course of an AOA bloom in South San Francisco Bay during the autumn of 2018 and seasonally throughout 2019. Nitrification rates were correlated with AOA abundance in quantitative polymerase chain reaction (PCR) data, and both increased several orders of magnitude between the autumn AOA bloom and spring and summer seasons. From bloom samples, we recovered an extremely abundant, high-quality Candidatus Nitrosomarinus catalina-like AOA metagenome-assembled genome that had high transcript abundance during the bloom and expressed >80% of genes in its genome. We also recovered a putative nitrite-oxidizing bacteria metagenome-assembled genome from within the Nitrospinaceae that was of much lower abundance and had lower transcript abundance than AOA. During the AOA bloom, we observed increased transcript abundance for nitrogen uptake and oxidative stress genes in non-nitrifier metagenome-assembled genomes. This study confirms AOA are not only abundant but also highly active during blooms oxidizing large amounts of ammonia to nitrite—a key intermediate in the microbial nitrogen cycle—and producing reactive compounds that may impact other members of the microbial community.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Combining Reactive Quantum-Mechanical Molecular-Dynamics Simulations with Mutagenesis, Crystallography, and Enzyme Kinetics to Reveal Plausible Steps of Isocyanide Hydratase Catalysis

A complete understanding of enzyme mechanisms requires atomistic details of chemical reactions. Quantum-based molecular dynamics simulations (QMD) are a potential source of this information, but trade-offs between accuracy and computational cost have limited their use. We previously developed extended Lagrangian Born–Oppenheimer molecular dynamics (XL-BOMD) methods that leverage a negligible compromise in accuracy to substantially decrease the cost of QMD simulations. Here, we develop a reactive QMD approach using the latest XL-BOMD formulation, which enables efficient simulations of highly reactive systems, and use it to investigate mechanisms of intermediate formation in isocyanide hydratase (ICH) catalysis. In QMD simulations, molecular analogs of ICH active site residues reacted with para-nitrophenyl isocyanide, forming a thioimidate. Analysis of simulated atomic configurational and charge dynamics revealed a pathway where protonation of the isocyanide carbon occurs prior to thioimidate formation and suggested a possible role of Asp17 as a proton donor in the early phase of ICH catalysis. To test whether the pathway seen using the reactive QMD approach might be relevant to ICH catalysis, we performed X-ray crystallography and pre-steady-state enzyme kinetics studies of wild-type and D17N mutant ICH. Both the structure and kinetics are sensitive to the D17N mutation in a manner that is consistent with the order of the reaction steps seen in the simulations. Mobile protons play essential roles in many enzymes, yet they are difficult to observe experimentally, making the ordering of proton-dependent steps ambiguous in many enzyme mechanisms. The ability to directly simulate model reactions for the design of experiments that provide information about enzyme mechanisms involving mobile protons demonstrates the significance of our reactive QMD approach and motivates further biological applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Coupled geomechanical investigation of depletion-induced fault reactivation

Fault reactivation during subsurface fluid production pose significant challenges to safe and sustainable resource extraction. Here, this study presents a three-dimensional coupled geomechanical framework to investigate the processes driving fault reactivation, capturing the interactions between reservoir dynamics and geomechanical responses. Verification against theoretical estimations based on linear poroelasticity confirms the model's capacity in representing reservoir background stress responses. However, the study reveals that relying solely on background stress states can underestimate or overestimate fault reactivation potential, emphasizing the importance of including localized stress perturbations such as differential compaction and stress redistribution. Applied to a fault (M1) inspired by the geological characteristics of the Groningen field, the model shows slip initiation at 2965 m depth with 16.0 MPa depletion, aligning with field observations where seismicity occurred at approximately 3 km depth after 15.8 MPa depletion. Parametric studies reveal: (1) inelastic reservoir compaction delays fault reactivation and mitigates fault slip by reducing stress concentration, (2) higher intermediate in-situ stress magnitudes decrease the Coulomb Failure Stress (CFS) increase rate and reduce fault slip, (3) larger fault offsets amplify shear stress near the offset zone, promoting earlier reactivation and longer rupture propagation, and (4) fault permeability significantly influences pressure diffusion, with low-permeability faults leading to sharper stress changes and earlier fault destabilization. These insights highlight the critical role of geological and mechanical parameters in fault reactivation and provide a predictive framework for mitigating induced seismicity risks.

Coupled geomechanical modeling↗
DOE OSTI2026

Networks of electrochemical oxidation of common lithium-ion Battery solvents revealed by NMR spectroscopy

Raising the upper cutoff voltage of lithium-ion batteries (LIBs) to increase energy density often exceeds the electrolyte’s anodic stability limit, accelerating degradation and creating a major durability tradeoff. Designing electrolytes that can sustain long-term high-voltage cycling requires a clearer understanding of the fundamental mechanisms occurring when commercial carbonate solvents oxidize. Here, to this end, simplified single-salt, single-solvent formulations of LiClO 4 and LiPF 6 in dimethyl carbonate (DMC), ethylene carbonate (EC), or ethyl methyl carbonate (EMC) were anodically electrolyzed on inert electrodes and monitored for extended periods of time using 1 H, 13 C, 19 F, and 35 Cl nuclear magnetic resonance (NMR) spectroscopy. The controlled environment of the experiments, coupled to the unique sensitivity of NMR, unveiled novel metastable intermediates and the formation of branching networks of products with temporal evolution. Oxidation of the pristine solvent primarily proceeds through a radical pathway that also produces highly reactive protons but faces competition from a second pathway involving a radical carbocation intermediate. In all cases, the intermediates follow a variety of downstream pathways that can intersect with each other. The concomitant network of reactions represents a significant increase in complexity compared to common descriptions in the literature, yet, critically, it helps explain the wide range of products typically identified in electrolyte oxidation in complete cells. The results highlight the need for refocusing fundamental research on anodic stability to analysis of the hierarchy of reaction networks to better inform efforts to mitigate the detrimental effects on battery performance, including prevention and harvesting of proton and radical products.

Electrolytes↗
DOE OSTI2020

Developing Scaling Relationships for Molecular Electrocatalysis through Studies of Fe-Porphyrin-Catalyzed O 2 Reduction

The oxygen reduction reaction (ORR) is a multiproton/multielectron transformation in which dioxygen (O 2 ) is reduced to water or hydrogen peroxide and serves as the cathode reaction in most fuel cells. The ORR (O 2 + 4e – + 4H + → 2H 2 O) involves up to nine substrates and thus requires navigating a complicated reaction landscape, typically with several high-energy intermediates. Many catalysts can perform this reaction, though few operate with fast rates and at low overpotentials (close to the thermodynamic potential). Attempts to optimize these parameters, both in homogeneous and heterogeneous electrocatalytic systems, have focused on modifying catalyst design and understanding kinetic/thermodynamic relationships between catalytic intermediates. One such method for analyzing and predicting catalyst reactivity and efficiency has been the development of “molecular scaling relationships”. In this work, we share our experience deriving and utilizing molecular scaling relationships for soluble, iron-porphyrin-catalyzed O 2 reduction in organic solvents. These relationships correlate turnover frequencies (TOF max ) and effective overpotentials (η eff ), properties uniquely defined for homogeneous catalysts. Following a general introduction of scaling relationships for both homogeneous and heterogeneous electrocatalysis, we describe the components of such scaling relationships: (i) the overall thermochemistry of the reaction and (ii) the rate and rate law of the catalyzed reaction. We then show how connecting these thermodynamic and kinetic parameters reveals multiple molecular scaling relationships for iron-porphyrin-catalyzed O 2 reduction. For example, the log(TOF max ) responds steeply to changes in ηeff that result from different catalyst reduction potentials (18.5 decades in TOF max /V in η eff ) but much less dramatically to changes in η eff that arise from varying the pKa of the acid buffer (5.1 decades in TOF max /V in η eff ). Thus, a single scaling relationship is not always sufficient for describing molecular electrocatalysis. This is particularly evident when the catalyst identity and reaction conditions are coupled. Using these multiple scaling relationships, we demonstrate that the metrics of turnover frequency and effective overpotential can be predictably tuned to achieve faster rates at lowered overpotentials. This Account uses a collection of related stories describing our research on soluble iron-porphyrin-catalyzed ORR to show how molecular scaling relationships can be derived and used for any electrocatalytic reaction. Such scaling relationships are powerful tools that connect the thermochemistry, mechanism, and rate law for a catalytic system. We hope that this collection shows the utility and simplicity of the molecular scaling approach for understanding catalysis, for enabling direct comparisons between catalyst systems, and for optimizing catalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗