Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Re”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Re-Engineering the Mission Operations System (MOS) for the Prime and Extended Mission

One of the most challenging tasks in a space science mission is designing the Mission Operations System (MOS). Whereas the focus of the project is getting the spacecraft built and tested for launch, the mission operations engineers must build a system to carry out the science objectives. The completed MOS design is then formally assessed in the many reviews. Once a mission has completed the reviews, the Mission Operation System (MOS) design has been validated to the Functional Requirements and is ready for operations. The design was built based on heritage processes, new technology, and lessons learned from past experience. Furthermore, our operational concepts must be properly mapped to the mission design and science objectives. However, during the course of implementing the science objective in the operations phase after launch, the MOS experiences an evolutional change to adapt for actual performance characteristics. This drives the re-engineering of the MOS, because the MOS includes the flight and ground segments. Using the Spitzer mission as an example we demonstrate how the MOS design evolved for both the prime and extended mission to enhance the overall efficiency for science return. In our re-engineering process, we ensured that no requirements were violated or mission objectives compromised. In most cases, optimized performance across the MOS, including gains in science return as well as savings in the budget profile was achieved. Finally, we suggest a need to better categorize the Operations Phase (Phase E) in the NASA Life-Cycle Phases of Formulation and Implementation

Extended Mission↗
NASA NTRSDate not supplied

Development of a Low-Cost, Highly Flexible Re-Entry Platform

With a growing interest in atmospheric entry, descent, and landing research as well as the necessity to empirically test increasingly complicated entry systems, a growing need for a quick and cost-effective method of experimentation is needed. The Hypersonic Configurable Unit Ballistic Experiment is a test and evaluation platform allowing for in-situ research and rapid testing of novel technologies in a re-entry environment. HyCUBE takes the form of a small satellite-sized re-entry vehicle and, with the additional space on board the vehicle, can act as a platform for testing novel guidance and control methodologies.

Aero-Thermodynamics↗
DOE OSTI2021

Azo–hydrazone tautomerism in organometallic complexes triggered by a -Re(CO) 3 (L) core: A spectroscopic and theoretical study

The spectroscopic properties and tautomeric behavior of five novel Rhenium (I) tricarbonyl complexes bearing an azo ligand are presented. The organic ligand is stable in solution as the hydrazone tautomer. It remains as hydrazone in different medium conditions (solvent, concentration, pH, etc.) without the formation of detectable amounts of the azo tautomer. However, the complexation of this ligand to the strong electron-withdrawing fragment -Re(CO) 3 X (X = Cl – , Br – ) causes tautomerism to appear in the organic moiety. Two well-defined regions in the electronic spectra for both tautomers were observed, allowing the azo/enol-keto/hydrazone equilibrium to be followed. TD-DFT calculations indicate that for the keto/hydrazone form, the main absorption band is attributed to an IL transition. In contrast, the azo/enol species shows a major contribution of the 1 MLCT (dπ(Re) → dπ*(NN)) transition. The tautomeric equilibrium is easily shifted using solvents with different dielectric constant and hydrogen bond donor/acceptor (HBD/HBA) abilities. Also, the tautomerization process is deeply influenced by the electronic properties of the axial ligand. Therefore, this behavior represents a different strategy for the design of novel materials with optical properties. Furthermore, tautomerism is affected by the concentration of complexes and the presence of water in solvents. Finally, the acid-base behavior of these compounds in a 50% v/v ethanol-buffer system showed that the azo/enol tautomer is stabilized in acidic media. At the same time, an increase of pH promotes tautomerization toward the keto/hydrazone, followed by forming the anionic form at pH > 8.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigation of MO x (M = Cr, Mn, Re, and Mo) coated stainless-steel electrodes for oxygen evolution reaction in natural seawater electrolysis

Seawater electrolysis is considered a potential strategy for large-scale of affordable H 2 production. However, poor durability of the anode for oxygen evolution reaction (OER) in natural seawater is a remaining concern due to chloride-induced reaction. Herein, the effect of various MO x (M = Mn, Cr, Re, and Mo) coated stainless steel (SS) electrodes on OER in direct natural seawater electrolysis was comprehensively studied. It is found that the Mo-coated SS electrode is superior to all others in terms of durability, followed by Re-coated SS, while the Cr and Mn-coated SS electrodes show the poorest durability. Additionally, the durability and activity of the Mo/SS electrode can be boosted remarkably in 1 M KOH/seawater compared to the natural seawater, resulting in an overpotential at 10 mA cm −2 decrease from 830 to 399 mV. Meanwhile, no degradation is observed at 1000 mA cm −2 for 100 h in 1 M KOH seawater, which is among the best stability, based on the literature review. Moreover, the improved durability and activity with Mo coating were extended to the Inconel 718 substrate, and around 40 % improvement in durability and 25 mV overpotential decrease at 10 mA cm −2 are observed, which indicates that Mo coating can be considered as a universal approach to improve the anode durability and activity. The improved performance with Mo coating may be attributed to the continuous Mo oxide layer formation or in situ generated MoO 4 2− in the OER process. In conclusion, this work provides a holistic strategy to enhance the anode durability and activity under harsh conditions, offering valuable insights for designing corrosion-resistant electrodes in direct seawater electrolysis.

Direct seawater electrolysis↗
DOE OSTI2022

Experimental investigations of Critical Heat Flux re-occurrence on post-CHF surfaces

Under the extreme environments of light water reactors, the cladding materials demonstrate evolutionary transformations in terms of material compositions, surface morphologies, and thermal-physical properties. This study investigates how the temperature overshooting of Critical Heat Flux (CHF) affects the re-occurrence of CHF on the post-CHF surfaces. Experimental results reveal that the CHF difference between as-received and post-CHF surfaces can be significant, which depends on materials. CHF is enhanced on post-CHF Stainless Steel (SS 316) specimens while it deteriorates on post-CHF Inconel-600 specimens. In comparison with the as-received surfaces, the post-CHF surface of SS 316 is more hydrophobic, while Inconel 600 is more hydrophilic. The scanning electron microscope micrographs of post-CHF surfaces show that surface morphologies that are structured by oxide crystals are formed on SS 316 samples but not on Inconel 600 samples. The physical rationale behind the CHF difference could be boiling heat transfer conjugated with thermal-physical proprieties of investigated surface materials and surface morphologies features. In conclusion, the results imply that it is indispensable to bookkeep the evolutionary changes of cladding surface materials, especially for cladding candidates of Accident Tolerant Fuel since operation histories can leave footprints on cladding surfaces, thus resulting in CHF re-occurrence differences.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Energy Migration Processes in Re(I) MLCT Complexes Featuring a Chromophoric Ancillary Ligand

We present herein the synthesis, structural characterization, electronic structure calculations, and ultrafast and supra-nanosecond photophysical properties of a series of five Re(I) bichromophores exhibiting metal to ligand charge transfer (MLCT) excited states based on the general formula fac -[Re(N ^ N)(CO) 3 (PNI-py)]PF 6, where PNI-py is 4-piperidinyl-1,8-naphthalimidepyridine and N ^ N is a diimine ligand ( Re1 – 5 ), along with their corresponding model chromophores where 4-ethylpyridine was substituted for PNI-py ( Mod1 – 5 ). The diimine ligands used include 1,10-phenanthroline (phen, 1 ), 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (bcp, 2 ), 4,4'-di- tert -butyl-2,2'-bipyridine (dtbb, 3 ), 4,4'-diethyl ester-2,2'-bipyridine (deeb, 4 ), and 2,2'-biquinoline (biq, 5 ). In these metal–organic bichromophores, structural modification of the diimine ligand resulted in substantial changes to the observed energy transfer efficiencies between the two chromophores as a result of the variation in 3 MLCT excited-state energies. The photophysical properties and energetic pathways of the model chromophores were explored in parallel to accurately track the changes that arose from introduction of the organic chromophore pendant on the ancillary ligand. All relevant photophysical and energy transfer processes were probed and characterized using time-resolved photoluminescence spectroscopy, ultrafast and nanosecond transient absorption spectroscopy, and time-dependent density functional theory calculations. Of the five bichromophores in this study, four ( Re1 – 4 ) exhibited a thermal equilibrium between the 3 PNI-py and the 3 MLCT excited state, drastically extending the lifetimes of the parent model chromophores.

14 SOLAR ENERGY↗
DOE OSTI2023

A Dicationic fac -Re(bpy)(CO) 3 Cl for CO 2 Electroreduction at a Reduced Overpotential

Here, a dicationic Re bipyridine-type complex, fac-Re(6,6'-(2-((trimethylammonio)-methyl)phenyl)-2,2'-bipyridine)(CO) 3 Cl hexafluorophosphate (1 2+ ), has been synthesized and its electrochemical behavior under Ar and CO 2 has been investigated. The presence of pendent tetra-alkylammonium cations induces an anodic shift in the electrocatalytic potential for CO 2 reduction relative to structurally similar model complexes. The electrochemical mechanisms in anhydrous CH 3 CN and in the presence of weak acids (water or trifluoroethanol) have been analyzed using cyclic voltammetry assisted by infrared spectroelectrochemistry and theoretical calculations. The dication enables catalysis at a diminished potential through coulombic stabilization of the doubly reduced pentacoordinate species, its CO 2 adduct, the hydroxide anion, and the conjugate base formed during acid-assisted C-OH bond cleavage of the metallocarboxylic acid to the metallocarbonyl and H 2 O. The major reduction product is CO, but in the presence of trifluoroethanol, formate is also produced with 14% Faradaic efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Gelation and Re-entrance in Mixtures of Soft Colloids and Linear Polymers of Equal Size

Liquid mixtures composed of colloidal particles and much smaller non-adsorbing linear homopolymers can undergo a gelation transition due to polymer-mediated depletion forces. We now show that the addition of linear polymers to suspensions of soft colloids having the same hydrodynamic size yields a liquid-togel-to-re-entrant liquid transition. In particular, the dynamic state diagram of 1,4-polybutadiene star-linear polymer mixtures was determined with the help of linear viscoelastic and small-angle Xray scattering experiments. While keeping the star polymers below their nominal overlap concentration, a gel was formed upon increasing the linear polymer content. Further addition of linear chains yielded a re-entrant liquid. This unexpected behavior was rationalized by the interplay of three possible phenomena: (i) depletion interactions, driven by the size disparity between the stars and the polymer length scale which is the mesh size of its entanglement network; (ii) colloidal deswelling due to the increased osmotic pressure exerted onto the stars; and (iii) a concomitant progressive suppression of the depletion efficiency on increasing the polymer concentration due to reduced mesh size, hence a smaller range of attraction. Our results unveil an exciting new way to tailor the flow of soft colloids and highlight a largely unexplored path to engineer soft colloidal mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Selective Reduction of Carbon Dioxide in Water Using [M(bpy2+)(CO)3(I)]2+ (M = Mn, Re) Electrocatalysts with Pendent Cations

Manganese(I) carbonyl complexes are promising electrocatalysts for CO2 reduction, yet their application in homogeneous aqueous media remains limited by poor solubility and selectivity. Here, we report water-soluble Mn(I) and Re(I) complexes fac-[M(bpy2+)(CO)3X]2+ (X = I or Cl), featuring bipyridine ligands functionalized with -Ph-CH2-(NMe3)+ cationic ammonium groups that integrate water solubility with secondary-sphere stabilization. In bicarbonate buffer at pH 6.8, the Mn catalyst is completely selective for CO production at a low overpotential (η = 0.3 V), operating by a protonation-first mechanism with observed rates of ~10 s−1. Pulse radiolysis reveals that the one-electron reduced Mn species undergoes dimerization in the absence of CO2 but uniquely reacts competitively with CO2 through an initial pre-equilibrium followed by fast formation of a dinuclear CO2-bridged species (ΔGo = −12.4 kcal mol−1). At a higher 0.6 V over-potential, a faster reduction-first pathway (~100 s−1) is available upon reduction of the metallo-carboxylic acid intermediate, Mn-CO2H2+; however, this regime is functionally limited by the formation of a resistive, noncatalytic film on the electrode surface. Comparison to the analo-gous water-soluble Re catalyst (kobs = 440 s−1, η = 0.6 V) highlights the distinct mechanistic ad-vantages of earth-abundant Mn in low-potential catalysis. These results demonstrate how cati-onic second-sphere design enables selective, homogeneous CO2 reduction in water while reveal-ing competing radical and electrode-mediated processes that govern catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrical de-poling and re-poling of relaxor-PbTiO 3 piezoelectric single crystals without heat treatment

Re-poling of unexpected partially depoled piezoelectric materials conventionally needs to be first fully depoled through annealing above their Curie temperature to revive piezoelectric performances. Here, we investigated de-poling and re-poling of Pb(In 1/2 Nb 1/2 )O 3 -Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 single crystals under electric fields at room temperature. We found that alternating current electric fields with amplitudes near the coercive field at low frequencies (<10 Hz) can be employed to successfully depolarize poled crystals at room temperature. We also demonstrated a reversible polarization switching process with a relaxor-PbTiO 3 single crystal ultrasound transducer without device performance degradations. This experimental observation is supported by phase-field simulation, showing that alternating current electric fields can readily induce de-poling at room temperature, while direct current electric fields induce a transient depoled state only within an uncontrollable short period of time. The findings suggest new strategies for unprecedented in-device tailoring of the polarization states of ferroelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Photochemistry and in vitro anticancer activity of Pt(IV)Re(I) conjugates

The photophysical and photochemical properties of two Pt(IV)Re(I) conjugates were studied via both experimental and computational methods. Additionally, both conjugates exhibit modest photocytotoxicity against ovarian cancer cells. X-ray fluorescence microscopy showed that Pt and Re colocalize in cells whether they had been irradiated or not. This work demonstrates the potential of photoactivated multilimetallic agents for combating cancer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Quantum Circuit Partitioning for Scalable Noise-Aware Quantum Circuit Re-Synthesis

Re-synthesis techniques are utilized to optimize the quantum circuit. To enable scalable re-synthesis a divide-and-conquer approach is adopted that partitions the circuit into smaller blocks, which are optimized independently. Several algorithms have been proposed to minimize the block number while maximizing the gate count of each block. However, they vary in their performance and may not yield the highest output fidelity. We propose a reinforcement learning-based quantum circuit partitioning framework that incorporates the physical properties of the quantum hardware to maximize the output fidelity post-quantum circuit optimization. To accelerate the training, we also propose a noise injection method that enables on-the-fly optimization in the reinforcement learning environment, independent of the adopted optimization/re-synthesis method at the block level. We evaluate our approach compared to different partitioning techniques using various quantum benchmarks executed on IBM Q Hanoi quantum computer.

Charrwi, Mohammad Walid↗
DOE OSTI2023

Building Re-tuning Simulator

The Building Re-tuning Simulator (BRS) is a Re-tuning focused modeling and building automation system simulation environment.

Fernandez, Nick↗
DOE OSTI2025

Ipopt Interface to Re::Solve Linear Solver

The software provides Ipopt optimization package an interface to the Re::Solve linear solver library. Re::Solve features GPU-resident direct and iterative linear solvers that could be used to accelerate optimization computations.

Alam, Maksudul [Oak Ridge National Laboratory (ORN↗
DOE OSTI2026

Seismic Recovery of Acoustic Source Height During the OSIRIS-REx Sample Return Capsule Re-Entry

Controlled hypersonic reentries with well‐constrained trajectories are exceedingly rare, yet they provide valuable reference cases for validating geophysical source characterization methods applicable to bolides and space debris. The 24 September 2023 re‐entry of the OSIRIS‐REx Sample Return Capsule, the first interplanetary capsule to return over the contiguous United States in nearly two decades, presented such an opportunity. Here, we present seismic observations of this event recorded at 16 stations across three sites at ground distances of 7–20 km from the trajectory. Using eigenray tracing through ground‐to‐space atmospheric specifications, we invert picked acoustic‐to‐seismic travel times for effective shock‐generated acoustic source altitudes along the known trajectory. The method recovers source heights of 57.9–59.5 km with travel‐time residuals <1 s across all stations. The seismic‐derived source heights, when compared at their along‐track positions, fall within the range of previously published infrasound‐derived heights for the corresponding trajectory segment, with intermethod differences comparable with the timing‐based uncertainty. These results suggest that air‐to‐ground coupling does not introduce a resolvable systematic timing bias in the picked near‐field seismic arrivals, supporting seismic observations as a complementary tool for altitude estimation of bolides, re‐entry vehicles, and other hypersonic atmospheric sources.

Silber, Elizabeth Allaryce [Sandia National Labora↗
DOE OSTI2020

Re-Release of the ENDF/B VIII.0 S(α,β) Data Processed by NJOY2016

“ENDF/B-VIII.0 provides a major update to the ENDF thermal scattering library. Indeed, it is nearly a completely new sub-library. Only the legacy evaluations for Al, Fe, liquid and solid methane, ortho- and para- hydrogen and deuterium and benzene and the ENDF/B-VII.1 evaluations for SiO2 are unchanged.” Thirty-four (34) materials are provided in ENDF/B-VIII.0 with a total of two hundred and fifty-three (253) evaluations. LEAPR input files are also included for each of the materials as well as “readme” files for most of the materials. All of these 34 thermal scattering files have been re-processed with NJOY2016 (version 53) to produce 253 ACE files suitable for use in MCNP or other similar codes. Table 1 lists the 34 materials which are included in the ENDF/B-VIII.0 thermal scattering library and also notes where major changes have occurred in the re-release.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Doing Pandemic R&D as if There’s No Mañana: Charting a course to zig and zag our way out of the pandemonium we’re in

Since the beginnings of Sandia National Laboratories, Sandians have made the unthinkable not only thinkable, but also plannable and doable. Over time, we’ve tempered ourselves, studying and devising ways to deter, defend against, and blunt threats of mass death, destruction, and disruption. Now we, and all within our social circles, are living one of the nightmares that only a small fraction of our fellow Sandians have pondered, tackled, and anticipated––a virus that bypasses militaries, zips through borders, hitches to domestic travelers and commuters, makes its hosts unknowing dangers to others, overwhelms hospitals and clinics, hobbles governments, and takes away the lives and livelihoods of compromised and marginalized people everywhere. Taken by surprise, Sandians have dispersed and re-congregated into three interconnected camps. Those who determinedly and defiantly carry on with the work they’ve been doing since before the pandemic hit. Those who are doggedly mustering and redirecting their abilities, experience, education, and energies to get us to the other side of this crisis (without ending up on the Other Side in the process). And those who are in fight-or-flight mode because this virus is pushing them to their personal limits, directly threatening them and/or the lives, jobs, and businesses that matter to them. From these three camps (which some of us migrate between on a daily, hourly, or even minute-by-minute basis), we make our individual and collective attempts to hold it together, do our work, and live another day. While there is much about this that is beyond our control, we are anything but helpless. Each of us has specialized powers and influence that can be brought to bear on the big and small parts of this gnarly problem. It all starts with a personal and collective understanding of the situation we’re in.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Soliton formation and topology manipulation of coupled spins via ultrafast re-magnetization

The major goal of the project was to explore the properties of magnetic order driven far out of equilibrium by optical excitations. These include fundamental questions related to the interplay of magnetic, structural and electronic degrees of freedom in materials that are optically excited. These problems break down in short term quenching of the magnetization as a results of the energy of the optical pulse studying how the energy of the optical pulse and the angular momentum of the magnetization flow between the different degrees of freedom. This is followed by the longer time re-emergence of the magnetism as the system cools. Within this goal we explored the formation of solitons, both with and without non-trivial topology, via rapid re-magnetization processes after optical-driven ultrafast demagnetization. Guided by theory, we predict that turbulence and modulational instabilities will drive the formation of solitons, including dispersive shock waves, magnon droplets, and skyrmions. In the case of topological defect formation, i.e. skyrmion generation, related processes have long been predicted based on general principles of symmetry-breaking phase transitions; the density of topological defects in a long-range-ordered phase can be controlled by varying the quench rate through the second-order phase transition, i.e. the Kibble-Zurek (KZ) mechanism. We, more broadly, had the goal to study a range of other emergent magnetic behaviors after optical excitation. While great attention has been given to ultrafast demagnetization, less is known of the subsequent spin dynamics and coupling to the lattice. What is increasingly appreciated is that ultrafast demagnetization leads to spin currents that can carry angular momentum from the rapidly demagnetized sample. These spin currents appear in many ways but fundamentally controls demagnetization, drives interactions between regions of the material, and control the spin resulting structure. They can be probed many ways including THz emission which, in turn, gives insight into the demagnetization processes. Simultaneously if there is magneto-elastic coupling ultrafast demagnetization can drive structural excitations that are not expected from thermal energy added to the lattice. We explored a range of complex phenomena that arise from photo-excitation of magnetic systems with the coupling of electronic, magnetic and structural degrees of freedom. We have made a number of fundamental discoveries that are reflected in our publications list with additional work still being prepared for publication. Highlights of this work include (i) ultra-efficient, nonlinear THz surface acoustics (ii) spin-current-mediated rapid magnon localization and coalescence, (iii) spin-wave soliton formation in ferromagnetic FePt nanoparticles, (iv) dynamic phonon coupling in elemental antiferromagnetic Cr, (v) THz emission from Co/Pt bilayers and FeRh/Pt bilayers, (vi) theoretical investigation of spin hydrodynamics, solitons and shock waves, and (vii) ultrafast perturbation of magnetic domains by optical pumping.

36 MATERIALS SCIENCE↗