Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RODS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

On the use of LES-based turbulent thermal-stress models for rod bundle simulations

An alternative methodology is proposed here to overcome the excessive cost of large eddy simulations (LES) of full-length heated rod bundle calculations, while improving the inaccurate results typically obtained with Reynolds-averaged Navier-Stokes equations (RANS). While the cost of the full-length LES is generally too high, LES of a small section of a single rod is usually affordable. The idea presented here consists of using the information granted by the small LES calculation to determine the appropriate turbulence viscosity or turbulent thermal diffusivity that can be used to solve only for the temperature field in a pseudo-RANS approach. The study has been performed with single-rod simulations with a P/D of 1.12 and 1.24, considering rod lengths that are representative of reactor applications, for the cases of uniform heat flux and a more realistic cosine-like axial heat distribution. Here, the spectral element code Nek5000 has been used for all LES, RANS, and pseudo-RANS simulations. The recently proposed Nek5000 steady-state solver has been used for solving the temperature field in the pseudo-RANS approach and has proved significantly faster than transient schemes. Prediction of thermal quantities is compared with classical linear and nonlinear RANS models. LES for the full-length rods has also been performed and is used as a reference. Results of the proposed method show significant improvements with respect to those obtained with RANS.

42 ENGINEERING↗

Two-step synthesis of Bi{sub 2}Te{sub 3}-Te nanoarrays with sheet-rod multiple heterostructure

Bi{sub 2}Te{sub 3}-Te arrays with sheet-rod multiple heterostructure were obtained in large scale, using Te nanorod arrays as the in-situ templates under solvothermal process. The array is formed by the ordered Bi{sub 2}Te{sub 3}-Te rods where Bi{sub 2}Te{sub 3} sheets distribute from the top face to the bottom face along the Te rod vertically. The microstructure of the heterostructure was studied through X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The electrical conductivity and Seebeck coefficient of the arrays were also studied. The course of reaction was monitored so as to propose a possible growth mechanism of such novel heterostructure. The key for the preparation of such heterostructure is to balance the velocity between the dissolution of Te rods and the formation of Bi{sub 2}Te{sub 3} sheets. This synthetic approach could be promising to prepare self-assembled low-dimensional nanoarrays of metals and semiconductors with high yield. - Graphical abstract: Bi{sub 2}Te{sub 3}-Te arrays with sheet-rod multiple heterostructure were obtained in a large scale using Te nanorod arrays as the in-situ templates under the solvothermal process. Display Omitted

36 MATERIALS SCIENCE↗

Template-free synthesis of CoMoO{sub 4} rods and their characterization

Graphical abstract: - Highlights: • Template-free synthesis of rods of CoMoO{sub 4} was achieved under hydrothermal conditions. • The width of the rods is about 100 nm and the length varies from 1 to 5 μm. • Low temperature and pressure of synthesis favour the formation of longer rods. - Abstract: The effect of pressure and temperature on the synthesis of cobalt-molybdenum oxides and their characterisation is herein reported. The synthesis was performed under hydrothermal conditions without any template. It was found that the experimental conditions affect the physical properties of the CoMoO{sub 4}. SEM images demonstrate that the synthesised powder is comprised of rods, and the width of the structures is about 100 nm but the length varies from about 5 μm to less than 1 μm. Low temperature and pressure favour the formation of longer rods.

36 MATERIALS SCIENCE↗

Failure kinetics in borosilicate glass during rod impact

Failure front (FF) and penetration velocity have been measured for long gold rods impacting and penetrating borosilicate (BS) glass. Data are obtained by visualizing simultaneously FF propagation with a high speed camera and rod penetration with flash X-rays. Results for BS glass are qualitatively similar to those of DEDF (PbO) glass. FF velocity rapidly decreases from an initial value to a lower, approximately constant value. FF velocity increases with impact velocity, v{sub p}. The FF velocity remains significantly lower than the shear velocity, even at the highest impact velocity tested, about 2.5 km/s. The ratio of the FF velocity to the rod penetration velocity, v{sub F}/u, decreases with increasing v{sub p} and appears to be approaching v{sub F}/u = 1 asymptotically, as observed previously for DEDF glass. The separation of the FF and the tip of the rod decreases with increasing impact velocity. Importantly, since v{sub F}/u{>=}1, the gold rod is always penetrating glass behind the FF.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Control rod calibration and reactivity effects at the IPEN/MB-01 reactor

Researches that aim to improve the performance of neutron transport codes and quality of nuclear cross section databases are very important to increase the accuracy of simulations and the quality of the analysis and prediction of phenomena in the nuclear field. In this context, relevant experimental data such as reactivity worth measurements are needed. Control rods may be made of several neutron absorbing materials that are used to adjust the reactivity of the core. For the reactor operation, these experimental data are also extremely important: with them it is possible to estimate the reactivity worth by the movement of the control rod, understand the reactor response at each rod position and to operate the reactor safely. This work presents a temperature correction approach for the control rod calibration problem. It is shown the control rod calibration data of the IPEN/MB-01 reactor, the integral and differential reactivity curves and a theoretical analysis, performed by the MCNP-5 reactor physics code, developed and maintained by Los Alamos National Laboratory, using the ENDF/B-VII.0 nuclear data library.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Investigation of Backscatter X-ray imaging techniques for Uranium Dioxide Fuel Rods

Radiography by Selective Detection (RSD), was investigated for its ability to determine the presence and types of defects in a UO{sub 2} fuel rod surrounded by zirconium cladding. Images created using a Monte Carlo model compared favorably with actual X-ray backscatter images from mock fuel rods. A fuel rod was modeled as a rectangular parallelepiped with zirconium cladding, and pencil beam X-ray sources of 160 kVp (79 keV avg) and 480 kVp (218 keV avg) were generated using the Monte Carlo N-Particle Transport Code to attempt to image void and palladium (Pd) defects in the interior and on the surface of the fuel pellet. It was found that the 160 kVp spectrum was unable to detect the presence of interior defects, whereas the 480 kVp spectrum detected them with both the standard and the RSD backscatter methods, though the RSD method was very inefficient. It was also found that both energy spectra were able to detect void and Pd defects on the surface using both imaging methods. Additionally, two mock fuel rods were imaged using a backscatter X-ray imaging system, one consisting of hafnium pellets in a Zircaloy-4 cladding and the other consisting of steel pellets in a Zircalloy-4 cladding which was then encased in a steel cladding (a double encapsulation configuration employed in irradiation and experiments). It was found that the system was capable of detecting individual HfO{sub 2} pellets in a Zircaloy-4 cladding and may be capable of detecting individual steel pellets in the double-encapsulated sample. It is expected that the system would also be capable of detecting individual UO{sub 2} pellets in a Zircaloy-4 cladding, though no UO{sub 2} fuel rod was available for imaging.

36 MATERIALS SCIENCE↗

Multiphysics Pebble-Bed Reactor Control Rod Withdrawal Study

This work studied the responses of both a generic gas- and a fluoride-cooled PBR concept---the gPBR-200 and gFHR, respectively---during reactivity insertion accidents. Both models rely on 2-D axisymmetric simulations to solve the neutron flux distribution, nuclide concentrations, and temperature across the core---in addition to numerous representative pebble and TRISO particle simulations for determining fuel and moderator temperatures. This not only allows for computing maximum temperatures in the core---thus enabling estimation of how near the fuel is to peak operational and safety limits---as prescribed by specified acceptable fuel design limits, which are determined in such a way that fuel is not damaged during operational or anticipated abnormal occurrences---but also predicting how much of the core exceeds a given temperature limit, as well as determining the local energy deposition rate. These models consider both control rod withdrawal and ejection events. The former introduces a great deal more reactivity, as all the control rods are withdrawn (as opposed to a single one in the latter case), though at a much slower pace. In addition, for the gPBR-200, two limiting cases were considered: one with the core starting under hot full-power conditions and one with it starting under cold zero-power conditions. While the amount of reactivity added in the latter case is much higher (due to the far lower temperatures and the lack of neutron poisons such as Xe-135), the margin to temperature limits is also much more significant. Overall, for the design considered, none of the accidents resulted in the maximum fuel temperature reaching values close to the TRISO limit. However, the methodology presented herein could be very relevant if some designs consider reduced margins (e.g., higher temperatures) to achieve enhanced economics. Further model improvement is needed to better capture control rod worth, both in terms of cusping effects (as the rods are slowly withdrawn) and differential worth, especially as the tips of the rods near the upper cavity.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Molybdenum Sleeve Experiments in Fully-Reflected Water-Moderated Triangular-Pitched U(6.90)O 2 Fuel Rod Lattices (1.55 cm Pitch)

The US Department of Energy (DOE) Nuclear Energy Research Initiative funded the design and construction of the Seven Percent Critical Experiment (7uPCX) at Sandia National Laboratories. The start-up of the experiment facility and the execution of the experiments described here were funded by the DOE Nuclear Criticality Safety Program. The 7uPCX is designed to investigate critical systems with fuel for light water reactors in the enrichment range above 5 % 235 U. The 7uPCX assembly is a water-moderated and -reflected array of aluminum-clad U(6.90 %)O 2 fuel rods. Other critical experiments performed in the 7uPCX assembly are documented in LEU-COMP-THERM-078, LEU-COMP-THERM-080, LEU-COMP-THERM-096, LEUCOMP-THERM-097, LEU-COMP-THERM-101, and LEU-COMP-THERM-102. The purpose of these experiments was to measure the effects of molybdenum in nearly-critical systems. The molybdenum was introduced into the fuel arrays as tubular sleeves that surrounded some of the fuel rods in the fuel arrays measured. Four hundred molybdenum tubes nominally 12.7 mm outside diameter, 498 mm long, with 0.762 mm wall thickness were provided for the experiments by the Institut de Radioprotection et de Sûreté Nucléaire (IRSN). Small polyethylene adapters at each end of the tubes were used to center each tube on a fuel rod in the assembly. The critical experiments were done using a set of triangular-pitched grid plates fabricated for these experiments. The grid plate set accommodated a fuel array of a total of 1261 fuel rod positions on a pitch of 0.610 in (1.5494 cm) in a series of 20 hexagonal rings surrounding the central fuel rod. The fuel used in these experiments was fabricated using unirradiated 6.90 % enriched UO 2 fuel pellets from fuel elements designed to be used in the internal nuclear superheater section of the Pathfinder boiling water reactor operated in South Dakota by the Northern States Power Company in the 1960s. The fuel elements were obtained from The Pennsylvania State University where they had been stored for many years. The fuel pellets in those fuel elements were removed from the original Incoloy cladding and reclad in 3003 aluminum tubes and end caps for use in the experiments reported here. The five critical experiments in this series were performed in August through December 2022, in the Sandia Critical Experiments (SCX) at the Sandia Pulsed Reactor Facility. Case 1 had no molybdenum sleeves, Case 2 had 208 molybdenum sleeves clustered at the center of the array, Case 3 had 397 molybdenum sleeves clustered at the center of the array, Case 4 had 175 molybdenum sleeves in the central position and in five alternating hexagonal rings, and Case 5 had 331 molybdenum sleeves in the central position and in seven alternating hexagonal rings. All five critical experiments are judged to be acceptable as benchmark experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Remote Gamma Scanning System for Characterization of BWR and PWR Fuel Rod Sections

Sometimes challenges with the design and deployment of automated equipment in remote environments deals more with the constraints imposed by the remote environment than it does with the details of the automation. This paper discusses the development of a scanning system used to provide gamma radiation profiles of irradiated fuel rod segments. The system needed the capability to provide axial scans of cut segments of BWR and PWR fuel rods. The scanning location is A-Cell at the Radiochemical Processing Laboratory (RPL) at the Hanford site in Washington State. The criteria for the scanning equipment included axial scanning increments of a tenth of an inch or less, ability to scan fuel rods with diameters ranging from 3/8 inch to 5/8 inch in diameter, and fuel rod segments up to seven feet in length. Constraints imposed by the environment included having the gamma detector and operator controls on the outside of the hot cell and the scanning hardware on the inside of the hot cell. This entailed getting a narrow, collimated beam of radiation from the fuel rod to the detector on the outside of the hot cell while minimizing the radiation exposure caused by openings for the wires and cables traversing the hot cell walls. Setup and operation of all of the in-cell hardware needed to accommodate limited access ports and use of hot cell manipulators. The radiation levels inside the cell also imposed constraints on the materials used.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of Control Rod Designs for the Versatile Test Reactor

Different fractions of boron carbide were investigated for the control rod assemblies of the Versatile Test Reactor (VTR). Reducing the number of rods per assembly increases the overall volume fraction of B4C, thus increasing reactivity worth. Doing so also reduces the melting margin inside the pellets and the reactivity worth loss by EOL. As a result the control rod layouts with the most (CR61) and least (CR7) number of rods were deemed less favorable for each of those two reasons. Overall, CR19 was found to have sufficient safety margins with the second best reactivity worth. The design only required a 44% 10B enrichment to reach the conservative margins put forward. The arrangement is recommended for both the control and safety rods of the VTR.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Prediction of number of breached rods following a LBLOCA of Candu plants using a BEPU approach

Radioactive doses following design basis accidents (DBA) have been important safety criteria of Candu nuclear power plant and they have been predicted in terms of the number of breached fuel rods. To support the licensing review on this concern, an analysis of LBLOCA has been conducted by using the BEPU method of KINS, KINS-REM. Number of Breached Rods (NBR) following a LBLOCA was predicted at 95 percentile probabilistic upper level in 95 percentile confidence level. Peak Cladding Temperatures (PCT) of the 84 bundles in the core pass 4 were calculated from the 124 MARS code runs in which the uncertainties of 10 major parameters including fuel thermal conductivity and break flow model were implemented. The fuel rod breaching criteria, PCT>1477 K, was used to determine the NBR 95/95. From the calculation, the predicted NBR 95/95 was 1591 rods and the calculated maximum NBR was lower than 2000 rods. Through the further improvements in feedback of the channel power behavior to thermalhydraulic calculation and in channel group modeling, NBR in more reliable level can be expected. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

JASMINE: a fuel rod thermal-mechanical performance's code

JASMINE, which is developed by China General Nuclear Power Corporation (CGNPC), is a code for calculating thermal-mechanical response of PWR fuel rods. The code models many physical phenomena, including heat conduction through the fuel and cladding to the coolant, cladding elastic and plastic deformation, fuel elastic deformation, fuel swelling and densification,fuel-cladding mechanical interaction, fission gas release from the fuel, rod internal pressure, cladding oxidation and hydriding. Just as most fuel rod codes, JASMINE, which is a quasi-two dimensional code, includes a thermal module, a mechanical module, a fission gas release (FGR) module, and an internal pressure module. For thermal module, the time dependent thermal conduction equation of axisymmetric cylindrical geometry, Halden's fuel thermal conductivity, thermal conductivity integration method and multi-dimension Newton-Raphson procedure are used; for the mechanical module, generalized plane strain hypothesis, cladding-fuel axial lockup model, cladding thermal stress and transfer matrix method are applied; for fission gas release module, the time dependent diffusion equation for a spherical grain, Speight-Turnbull grain surface boundary condition, and Forsberg-Massih's method are used; for the internal pressure module, the ideal gas state equation is used. The code, which is on validation stage, will be used for fuel rod design of nuclear power plants in China in a near future. So far, the preliminary validation process for pellet centerline temperature and fission gas release, which is based on fuel rod test data in FUMEX-III project, has finished. According to the validation results, JASMINE has the ability to reasonably predicts fuel behavior and performance in-pile. JASMINE has good prediction in fuel temperature, and good prediction on FGR as a whole. However, for FGR in the range 1% to 15%, JASMINE over-predicts FGR; for other range, JASMINE underestimates FGR. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TREAT neutronics analysis of water-loop concept accommodating LWR 9-rod bundle

The Transient Reactor Test (TREAT) facility that was commissioned in 1959 and that was put in stand-by in 1994, is now facing an upgrade to provide irradiation services to a variety of experimental programs. The neutronic studies presented in this paper show that the TREAT facility is capable of performing transient tests on fresh 9-rod PWR bundles in a water loop design constructed from Inconel piping using only fuel assemblies from the original core. High burnup rods in the same proposed design configuration approach, but do not meet, energy deposition targets for narrow-pulse reactivity insertion accident testing. The option to use a Zircaloy-based water loop was evaluated and found to increase the power coupling factor (PCF) adequately, but several engineering considerations show that the Inconel loop should be considered the baseline design option until detailed design work is performed. TREAT's capabilities for steam-based LOCA testing were also evaluated and found to allow for higher specimen energy deposition than RIA tests primarily because the reactor can release more energy over longer shaped transients. The same test configurations were evaluated in the presence of a partial TREAT-upgrade (TU) core with the notable observation that TU elements can enable high burnup rods to achieve RIA energy targets with the Inconel water loop. Further observations show that the partial TU core can help recover excess reactivity as needed and flatten pin-to-pin power profiles for more prototypic test conditions. These studies demonstrate that a simple U/C atom ratio gradient implementation results in more energy deposition into the test specimen and works to flatten the rod-to-rod power profile. It is expected that the actual, specially designed TREAT upgrade core will be much more effective than this study of a modified version demonstrates and deserves a comprehensive investigation to identify true capability. Overall, the complex interplay between fuel, geometry, neutron absorbers, and moderators emphasize that the facility's capabilities are flexible and further enabled by the ability to use TU elements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The development of 3D physical program with integrated control rod calculation for HTR - 18525

The accurate calculation of the control rod worth in pebble bed high temperature gas cooled reactor(HTR) requires special treatment, because the control rod system of HTR is located outside the active zone. The current version VSOP did not calculate the control rod value directly, but use a compromise method called the Equivalent Boron Concentration (EBC). To obtain the value of the control rod with higher precision directly, this paper embedded the discontinuity factor (DF) corrected diffusion calculation into the original procedure of the VSOP. The computational procedure to obtain the DF on the side of the absorber region was optimized. While an appropriate coupling method has been developed to take into account the neutron leakage feedback, data transform and so on. The new program can achieve accurate control rod calculation and more realistic 3D power distribution during the physical calculation. The numerical results demonstrated the correctness of the new program preliminarily. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

High Resolution Stereoscopic PIV Measurements in a 5 x 5 Rod Bundle with Mixing Vane

Spacer grids are used in the pressurized water reactor (PWR) to fix, clamp the fuel rods, and enhance the turbulence mixing within the spaces of the rods and overall heat transfer performance. Proper understanding on the thermal-hydraulic characteristics of the turbulent mixing and heat transfer created by the space grids is important. However, spacer grids having complex design structure with dimple, mixing vane and spring have been challenges for computational fluid dynamics (CFD) turbulent models. High fidelity experimental data with spatial-temporal resolutions is essential to validate and assess the performances of CFD models. Baglietto and Ninokata applied an improved realizable anisotropic turbulence models via direct numerical simulation (DNS)-based near-wall formulation data to study the wall shear stresses and flow structures in tight bundle subchannels. These authors have shown that their models are able to capture the stress distribution and velocity field at an acceptable accuracy. The authors numerically studied the flow field characteristics at the region downstream of the spacer grids, and validated their results to particle imagery velocimetry (PIV) measurements. Dominguez and Hassan performed two-dimensional time resolved PIV (TR-PIV) measurements within a 5 x 5 PWR rod bundle with spacer-grids that utilized a matching index of refraction (MIR) approach. Their averaged data showed a rather uniform direction velocity profile after the spacer grid while the downstream illustrated a no slip wall profile. In this paper, we presents flow measurements in the MIR 5 x 5 fuel rod bundle with a spacer grid. Time resolved stereoscopic PIV (TR-SPIV) measurements were performed to obtain high spatial-temporal resolution two-dimensional three-component (2D3C) velocity vector fields in the subchannels between the rods. Flow statistics such as mean velocity, and Reynolds stresses were computed. The obtained experimental data can be used to improve the computational modeling and validate the numerical models that are currently applied to light and pressurized water reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On the theory of thin and thin-walled rods

Through the work of V. Z. Vlasov a theory of thin-walled rods has been established that is widely applicable in practice. This theory was extended by A. A. Umanski to thin-walled rods of closed profile section. The authors based their work on the concepts of the modern theory of shells. An attempt is made herein to construct a theory of thin-walled rods including the classical theory of deformation of thin rods by making use of a kinematic assumption.

LOADS - CYLINDERS↗

Breaking Parallel Orientation of Rods via a Dendritic Architecture toward Diverse Supramolecular Structures

Abstract Self‐assembled nanostructures of rod‐like molecules are commonly limited to nematic or layered smectic structures dominated by the parallel arrangement of the rod‐like components. Distinct self‐assembly behavior of four categories of dendritic rods constructed by placing a tri(hydroxy) group at the apex of dendritic oligo‐fluorenes is observed. Designed hydrogen bonding and dendritic architecture break the parallel arrangement of the rods, resulting in molecules with specific (fan‐like or cone‐like) shapes. While the fan‐shaped molecules tend to form hexagonal packing cylindrical phases, the cone‐shaped molecules could form spherical motifs to pack into various ordered structures, including the Frank–Kasper A15 phase and dodecagonal quasicrystal. This study provides a model system to engineer diverse supramolecular structures by rod‐like molecules and sheds new light into the mechanisms of the formation of unconventional spherical packing structures in soft matter.

Zhang, Ruimeng↗

Breaking Parallel Orientation of Rods via a Dendritic Architecture toward Diverse Supramolecular Structures

Abstract Self‐assembled nanostructures of rod‐like molecules are commonly limited to nematic or layered smectic structures dominated by the parallel arrangement of the rod‐like components. Distinct self‐assembly behavior of four categories of dendritic rods constructed by placing a tri(hydroxy) group at the apex of dendritic oligo‐fluorenes is observed. Designed hydrogen bonding and dendritic architecture break the parallel arrangement of the rods, resulting in molecules with specific (fan‐like or cone‐like) shapes. While the fan‐shaped molecules tend to form hexagonal packing cylindrical phases, the cone‐shaped molecules could form spherical motifs to pack into various ordered structures, including the Frank–Kasper A15 phase and dodecagonal quasicrystal. This study provides a model system to engineer diverse supramolecular structures by rod‐like molecules and sheds new light into the mechanisms of the formation of unconventional spherical packing structures in soft matter.

Zhang, Ruimeng↗