Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Proton Conducting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Single-layer graphene as a highly selective barrier for vanadium crossover with high proton selectivity

In this paper, we report near-zero crossover for vanadium cross-permeation through single-layer graphene immobilized at the interface of two Nafion® polymer electrolyte membranes. Vanadium ion diffusion and migration, including proton mobility through membrane composites, were studied with and without graphene under diffusion and migration conditions. Single-layer graphene was found to effectively inhibit vanadium ion diffusion and migration under specific conditions. The single-layer graphene composites also enabled remarkable ion transmission selectivity improvements over pure Nafion® membranes, with proton transport being four orders of magnitude faster than vanadium ion transport. Resistivity values of 0.02 ± 0.005 Ω cm 2 for proton and 223 ± 4 Ω cm 2 for vanadium ion through single atomic layer graphene are reported. This high selectivity may have significant impact on flow battery applications or for other electrochemical devices where proton conductivity is required, and transport of other species is detrimental. Our results emphasize that crossover may be essentially completely eliminated in some cases, enabling for greatly improved operational viability.

2D nanomaterial↗
DOE OSTI2025

Delineating Confinement Regimes for Nafion Thin Films via Simultaneous QCM-D and Spectroscopic Ellipsometry

Proton-conducting ionomers used in electrodes of electrochemical devices form nanometer-scale films covering metallic catalyst surfaces, wherein they experience confinement and interfacial effects absent in the bulk polymer. This confinement alters the physical properties of the ionomer film, which is postulated to increase the density and is attributed to the transport limitations observed in fuel-cell electrodes. Despite studies showing reduced swelling, no systematic measurement has validated this phenomenon by demonstrating both densification and stiffening as the film gets thinner. Here, this study aims to fill this gap by reporting the humidity-driven changes in swelling, mass uptake, and density of Nafion ionomer films cast at varying thicknesses (10–320 nm) onto a gold-plated sensor. The films were simultaneously probed during humidification using spectroscopic ellipsometry (SE) and a quartz crystal microbalance with dissipation (QCM-D), which allowed for determination of the density and shear stiffness. The effects of confinement were prominently observed below ∼30 nm, with films showing increased density along with decreased swelling and mass uptake during hydration. In addition, the confined films show a negative excess volume upon initial water sorption, implying a larger proportion of absorbed water might bound to ionic groups in accord with notion of localized densification.

Espinet, Kevin B. [University of California, Berke↗
DOE OSTI2021

Controlling and Optimizing Photoinduced Charge Transfer across Ultrathin Silica Separation Membrane with Embedded Molecular Wires for Artificial Photosynthesis

Ultrathin amorphous silica membranes with embedded organic molecular wires (oligo( p -phenylenevinylene), three aryl units) provide chemical separation of incompatible catalytic environments of CO 2 reduction and H 2 O oxidation while maintaining electronic and protonic coupling between them. For an efficient nanoscale artificial photosystem, important performance criteria are high rate and directionality of charge flow. Here, the visible-light-induced charge flow from an anchored Ru bipyridyl light absorber across the silica nanomembrane to Co 3 O 4 water oxidation catalyst is quantitatively evaluated by photocurrent measurements. Charge transfer rates increase linearly with wire density, with 5 nm -2 identified as an optimal target. Accurate measurement of wire and light absorber densities is accomplished by the polarized FT-IRRAS method. Guided by density functional theory (DFT) calculations, four wire derivatives featuring electron-donating (methoxy) and -withdrawing groups (sulfonate, perfluorophenyl) with highest occupied molecular orbital (HOMO) potentials ranging from 1.48 to 0.64 V vs NHE were synthesized and photocurrents evaluated. Charge transfer rates increase sharply with increasing driving force for hole transfer from the excited light absorber to the embedded wire, followed by a decrease as the HOMO potential of the wire moves beyond the Co 3 O 4 valence band level toward more negative values, pointing to an optimal wire HOMO potential around 1.3 V vs NHE. Comparison with photocurrents of samples without nanomembrane indicates that silica layers with optimized wires are able to approach undiminished electron flux at typical solar intensities. Combined with the established high proton conductivity and small-molecule blocking property, the charge transfer measurements demonstrate that oxidation and reduction catalysis can be efficiently integrated on the nanoscale under separation by an ultrathin silica membrane.

photocurrent measurements↗
DOE OSTI2025

Electronic Structural Optimization of the Air Electrodes for Reversible Protonic Ceramic Electrochemical Cells via IIIA Cation Doping

Reversible protonic ceramic electrochemical cells (R-PCECs) have emerged as a novel technology for clean and efficient energy generation and storage. Improving the oxygen and proton conduction characteristics and stability of air electrodes at intermediate temperatures is crucial for achieving a high performance. Herein, we optimize the electronic structure of a state-of-the-art PrBa 0.8 Ca 0.2 Co 2 O 5+δ (PBCC) air electrode via doping IIIA cations (Al 3+ , Ga 3+ , and In 3+ ). Also, it is shown that PrBa 0.8 Ca 0.2 Co 1.9 Ga 0.10 O 5+δ (PBCCGa 0.10 ) exhibits improved oxygen reaction activity and hydration capability. Density functional theory calculations confirm that Ga doping provides the most favorable electronic structure. An R-PCEC with PBCCGa 0.10 achieves a peak power density of 2.21 W cm -2 and a current density of −4.64 A cm -2 at 1.3 V at 650 °C. Additionally, the PBCCGa 0.10 electrode performs good operational stability in FC mode (for about 100 h), EC mode (for about 100 h), and reversible cyclic testing (over 200 h) at 600 °C.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Regulation of Energy and Mass Transport in a Hydrogen-Bonded Framework for Visible-Light-Driven CO2 Reduction in Water

Photoenzymatic reduction of CO2 to formate is a promising strategy for carbon valorization, yet its efficiency is still limited by inefficient energy and mass transport. Here, we design a series of isostructural hydrogen-bonded organic frameworks (HOFs) that establish confinement effects to promote photocatalytic NADH regeneration and the subsequent NADH-dependent enzymatic CO2-to-formate reduction. We demonstrate that spatial confinement within the framework channels localizes exciton migration to nanoscale domains and promotes interfacial dissociation. Additionally, Rh-induced electronic-structure modulation enables ultrafast electron transfer, while the intrinsic hydrogen-bond network furnishes directional proton conduction to NAD+. These synergistic regulations afford a photocatalytic NADH regeneration efficiency of 99.8% with a record apparent quantum efficiency of 32.8%, and drive formate production at a rate of 3020 μmol g-1 h-1 with 100% selectivity─the highest rate reported to date for all light-driven systems in water. The HOF-based catalyst retains 86.3% of its initial activity over five cycles, highlighting its robustness. This work offers mechanistic insight into how microenvironment engineering within HOF architectures regulates energy and mass transport in photoenzymatic catalysis, paving the way for the rational design of advanced hybrid catalytic systems.

Xu, Jiaxing↗
DOE OSTI2022

Protonated phosphonic acid electrodes for high power heavy-duty vehicle fuel cells

We report that state-of-the-art automotive fuel cells that operate at about 80 °C require large radiators and air intakes to avoid overheating. High-temperature fuel cells that operate above 100 °C under anhydrous conditions provide an ideal solution for heat rejection in heavy-duty vehicle applications. Here we report protonated phosphonic acid electrodes that remarkably improve the performance of high-temperature polymer electrolyte membrane fuel cells. The protonated phosphonic acids comprise tetrafluorostyrene-phosphonic acid and perfluorosulfonic acid polymers, where a perfluorosulfonic acid proton is transferred to the phosphonic acid to enhance the anhydrous proton conduction of fuel cell electrodes. By using this material in fuel cell electrodes, we obtained a fuel cell exhibiting a rated power density of 780 mW cm -2 at 160 °C, with minimal degradation during 2,500 h of operation and 700 thermal cycles from 40 to 160 °C under load.

25 ENERGY STORAGE↗
DOE OSTI2023

Lowering the operating temperature of protonic ceramic electrochemical cells to <450 °C

Protonic ceramic electrochemical cells (PCECs) can be employed for power generation and sustainable hydrogen production. Lowering the PCEC operating temperature can facilitate its scale-up and commercialization. However, achieving high energy efficiency and long-term durability at low operating temperatures is a long-standing challenge. Here, in this work, we report a simple and scalable approach for fabricating ultrathin, chemically homogeneous, and robust proton-conducting electrolytes and demonstrate an in situ formed composite positive electrode, Ba 0.62 Sr 0.38 CoO 3–δ –Pr 1.44 Ba 0.11 Sr 0.45 Co 1.32 Fe 0.68 O 6–δ , which significantly reduces ohmic resistance, positive electrode–electrolyte contact resistance and electrode polarization resistance. The PCECs attain high power densities in fuel-cell mode (~0.75 W cm –2 at 450 °C and ~0.10 W cm –2 at 275 °C) and exceptional current densities in steam electrolysis mode (–1.28 A cm –2 at 1.4 V and 450 °C). At 600 °C, the PCECs achieve a power density of ~2 W cm –2 . Additionally, we demonstrate the direct utilization of methane and ammonia for power generation at <450 °C. Our PCECs are also stable for power generation and hydrogen production at 400 °C.

25 ENERGY STORAGE↗
DOE OSTI2023

Understanding the effects of fabrication process on BaZr 0.9 Y 0.1 O 3– δ grain-boundary chemistry using atom probe tomography

Proton-conducting oxides, such as BaZr 0.9 Y 0.1 O 3–δ (BZY10), are receiving significant scientific attention for application in a variety of electrochemical applications. It has been shown that the synthesis route has a significant effect on the ionic behavior of these materials, especially the grain boundaries (GB). In this study, laser-pulsed atom probe tomography (APT) is used to characterize the GB chemistry of BZY10 samples prepared by four different methods: (1) spark plasma sintering (SPS), (2) conventional sintering followed by high-temperature annealing (HT), (3) conventional sintering with NiO used as a sintering aid (SSR-Ni), and (4) solid-state reactive sintering of oxide precursor powders with NiO as a reactive sintering aid (SSRS-Ni). Oxygen depletion (corresponding to oxygen vacancy accumulation) was observed at every GB in this study, consistent with the positive space-charge GB region commonly assigned to these materials. In contrast to the consistent trends associated with oxygen depletion, cation constituents showed varying segregation/depletion behaviors. The samples that used NiO revealed Ni preferentially segregating to the GB. The most common impurities in BZY10 are Al, Fe, Mg, Si, and Sr, all of which generally accumulate at GBs. In order to quantify these chemical trends, the APT method was optimized for this material supplemented with understanding from density functional theory (DFT). Finally, this APT study reveals the complexity of BZY10 GB chemistry and shows that even adjacent GBs in the same material can sometimes show surprisingly different GB chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Instrument for spatially resolved, temperature-dependent electrochemical impedance spectroscopy of thin films under locally controlled atmosphere

We demonstrate an instrument for spatially resolved measurements (mapping) of electrochemical impedance under various temperatures and gas environments. Automated measurements are controlled by a custom LabVIEW program, which manages probe motion, sample motion, temperature ramps, and potentiostat functions. Sample and probe positioning is provided by stepper motors. Dry or hydrated atmospheres (air or nitrogen) are available. The configurable heater reaches temperatures up to 500 °C, although the temperature at the sample surface is moderated by the gas flow rate. The local gas environment is controlled by directing flow toward the sample via a glass enclosure that surrounds the gold wire probe. Software and hardware selection and design are discussed. Reproducibility and accuracy are quantified on a Ba(Zr,Y)O 3-δ proton-conducting electrolyte thin film synthesized by pulsed laser deposition. The mapping feature of the instrument is demonstrated on a compositionally graded array of electrocatalytically active Ba(Co,Fe,Zr,Y)O 3-δ thin film microelectrodes. The resulting data indicate that this method proficiently maps property trends in these materials, thus demonstrating the reliability and usefulness of this method for investigating electrochemically active thin films.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Faradaic efficiency in protonic-ceramic electrolysis cells

Abstract Proton-conducting ceramics (e.g. doped barium zirconates or cerates) are typically mixed ionic-electronic conductors (MIECs). The electronic conduction, typically in the form of positively charged small polarons or electron holes, leads to ‘electronic leakage.’ In an ideal steam-electrolysis cell, one gas-phase H 2 molecule is produced from every two electrons delivered from an external power source. In other words, such ideal behavior achieves 100% faradaic efficiency. However, the electronic flux associated with MIEC membranes contributes to reduced faradaic efficiency. The present paper develops a model that predicts the behavior of faradaic efficiency as a function of electrolysis-cell operating conditions. Although the model framework is more general, the paper focuses on the behavior of a cell based upon a BaCe 0.7 Zr 0.1 Y 0.1 Yb 0.1 O 3 − δ (BCZYYb) membrane. The study predicts the effects of operating conditions, including temperature, pressure, and gas compositions.

Zhu, Huayang↗
DOE OSTI2025

How Interface Evolution at the Nanoscale Dictates Protonic Ceramic Cell Behavior

Understanding the effects of heterointerfaces in nanodevices remains a challenge in interface engineering for systems applied in solid oxide fuel cells, catalysis, sensors, and memristors [1]. Previous studies have shown that the presence of interfaces in ceramic oxide nanodevices affects their impedance properties compared to bulk systems [2]. In this work, we analyze a thin-film model system designed to study the interfaces between representative electrode and electrolyte materials employed in protonic ceramic electrochemical cells for the reversible conversion of hydrogen o electricity. The investigated device features a 21-layer architecture that alternates between an electrode material PBSCF (PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+ϵ ) and a proton-conducting electrolyte BZY (BaZr 0.8 Y 0.2 O 3-δ ), with uniform 20 nm thickness for each layer. Here, the device was fabricated using Pulsed Laser Deposition (PLD) and supported on a conductive Nb-doped STO (Nb-SrTiO 3 ) substrate.

dos Santos, Gabriel T. [Northwestern University, E↗
DOE OSTI2023

Investigation of Nanoparticle Degradation in Hydrogen Fuel Cell Systems through Automated Electron Microscopy

Proton exchange membrane fuel cells (PEMFC) are promising devices for the deployment of hydrogen-powered heavy-duty vehicles, providing a higher efficiency for similar driving range and fueling time than the existing ones. However, PEMFCs still encounter durability challenges mainly due to catalyst degradation in the cathode. Mitigating these performance losses requires a better understanding of the degradation mechanisms under heavy-duty accelerated stress tests (ASTs) [1]. Scanning transmission electron microscopy (STEM) combined with energy dispersive X-ray spectroscopy (EDS) are key tools for the analysis of Pt and PtCo nanoparticle size, spatial distribution and composition [2]. Electron tomography is also used to determine the rate and type of degradation of catalyst nanoparticles as a function of their position on the carbon support. In this work, automated data acquisition software, paired with a custom Python code, have been used to study the effect of different accelerated stress tests (ASTs) on nanoparticle coarsening [2]. Figure 1 shows high-angle annular dark-field (HAADF)-STEM images and EDS maps comparing the cathodes of membrane electrode assemblies (MEAs) following an electrocatalyst AST performed under H2/N2 with that of the heavy-duty AST performed under H2/air. We will discuss how AST conditions affect considerably the spatial distribution of the nanoparticles across the electrode between the membrane and microporous layer. Although the median particle size increased more in the MEA aged under the heavy-duty AST, as determined using a high-throughput image analysis, the quantitative EDS measurements demonstrate that the electrocatalyst AST resulted in more Pt and Co dissolution from the cathode, which is another important indicator of electrocatalyst degradation. We will further present the impact of the relative humidity (% RH) on the degradation mechanisms demonstrated using the same approach. Electron tomography has been used to distinguish the Pt nanoparticles residing on the carbon support surface (exterior) from those within the pore structure (interior) in order to determine the relative stability of interior and exterior nanoparticles. As shown in Figure 2, we will compare the Pt catalyst particle size at the beginning of test (BOT) and end of test (EOT), and discuss the importance of automating the electron tomography workflow, i.e. acquisition, reconstruction, and visualization, to increase sampling and determine the standard deviation of these measurement. The outlook for utilizing low-dose cryo-tomography for limiting damage to the catalyst, support, and especially proton-conducting ionomer will also be discussed [3].

Amichi, Lynda↗
DOE OSTI2023

High-temperature low-humidity proton exchange membrane with “stream-reservoir” ionic channels for high-power-density fuel cells

The perfluorosulfonic acid (PFSA) proton exchange membrane (PEM) is the key component for hydrogen fuel cells (FCs). We used in situ synchrotron scattering to investigate the PEM morphology evolution and found a “stream-reservoir” morphology, which enables efficient proton transport. The short-side-chain (SSC) PFSA PEM is fabricated under the guidance of morphology optimization, which delivered a proton conductivity of 193 milliSiemens per centimeter [95% relativity humidity (RH)] and 40 milliSiemens per centimeter (40% RH) at 80°C. The improved glass transition temperature, water permeability, and mechanical strength enable high-temperature low-humidity FC applications. Performance improvement by 82.3% at 110°C and 25% RH is obtained for SSC-PFSA PEM FCs compared to Nafion polymer PEM devices. The insights in chain conformation, packing mechanism, crystallization, and phase separation of PFSAs build up the structure-property relationship. In addition, SSC-PFSA PEM is ideal for high-temperature low-humidity FCs that are needed urgently for high-power-density and heavy-duty applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Microscopy Studies of the Catalyst Inks for PEM Fuel Cells

The microstructure of the catalyst layer in proton exchange membrane fuel cells (PEMFC) is one of the key factors that determine fuel cell performance. The ink preparation, including dispersion solvent, mixing time, and mixing power, are among the less reported parameters that would influence the ionomer distribution on the catalyst surface and the continuity of the carbon network. In this work, novel characterization approaches have been used to investigate the effect of the Pt/C catalyst ink preparation conditions on the morphology and structures of the catalyst layer. Microscopy analysis revealed that longer mixing time led to better performing electrode structures than shorter mixing time. The longer mixing time enabled improved continuity of the ionomer network and high porosity in the cathode layer that contributes to improved proton conductivity and mass transport. This has been reflected in performance and durability tests, where the electrode made from a 5-day catalyst ink displayed improved performance compared to the one made from a 3-day ink. Durability studies showed 26% and 43% loss of the initial mass activity for 5 days and 3 days mixing, respectively. Finally, in addition, the catalyst layer prepared with ethylene glycol as the dispersion solvent showed better durability than water/1-propanol based solution.

25 ENERGY STORAGE↗
DOE OSTI2023

Electrospun Nanofiber Electrodes for High and Low Humidity PEMFC Operation

MEAs with nanofiber mat electrodes containing Pt/C catalyst and Nafion binder were fabricated and evaluated. The electrodes were prepared by electrospinning a solution of catalyst powder, salt-form Nafion (with Na + , Li + , or Cs + as the sulfonic acid counterion), and a carrier polymer of either polyethylene oxide or poly(acrylic acid). The carrier polymer was extracted prior to MEA testing by a hot water soaking step. The resulting fibers were 15%–17% porous, with a core–shell-like morphology (a coating of primarily Nafion on the fiber surface). MEAs with anode/cathode catalyst loadings of 0.1 mg Pt cm −2 each and a Nafion 211 membrane produced high power at both high and low relative humidity (RH) conditions in H 2 /air fuel cell tests, e.g., a maximum power density of 919 mW cm −2 at 100% RH and 832 mW cm −2 at 40% RH for a test at 80 °C and 200 kPa abs . The presence of nm-size pores within the fibers trapped water via capillary condensation during low RH feed gas testing, thus maintaining a high proton conductivity of the Nafion binder in the anode and cathode while minimizing/eliminating ionic isolation of catalyst particles in low water content, poorly conductive binder.

25 ENERGY STORAGE↗
DOE OSTI2020

High Performing and Durable Pyrophosphate Based Composite Membranes for Intermediate Temperature Fuel Cells [Slides]

Objective: Develop a novel proton conducting electrolyte operating at >200°C with conductivity σ ≥ 100 mScm –1 and RH < 1%. Fabrication of membranes of less than 40μm thickness while retaining high conductivity will result in ASR <0.04 Ωcm 2 . Evaluate membrane durability in terms of crossover, shorting resistance, and open circuit voltage, as well as against temperature cycling. Relevance: Operating FCs in the intermediate temperature range has the potential to greatly reduce cost and simplify water and thermal management. This effort requires novel materials and approaches to meet DOE membrane performance and durability targets. MPP/Polymer composite membranes show promise in early development for application in IT-FCs for transportation applications. Approach: We have demonstrated that both cation dopants and phosphate precursor influence MPP conductivity and identified the most promising MPP compositions for membrane fabrication. The ceramic MPP materials are fabricated as a composite membrane in a 90:10 wt% ratio with Nafion. We have modified our membrane fabrication procedure to improve the density of our membranes. Accomplishments: We demonstrated through-plane membrane conductivity of 95mScm -1 at T > 200°C and RH<0.04bar with a thickness 50μm. We demonstrated FC performance up to 94hrs at 220°C and <1% RH with a 50μm thick membrane exhibiting an OCV of 0.98V and ASR of 0.08 Wcm 2 . Future work: Further decrease in ASR is expected by decreasing the membrane thickness to <40μm. ITPP with higher P:M ratio will be used to increase the conductivity of the starting material. Long term durability will be assessed against DOE technical targets

30 DIRECT ENERGY CONVERSION↗