Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Accounting for erroneous model structures in biokinetic process models

In engineering practice, model-based design requires not only a good process-based model, but also a good description of stochastic disturbances and measurement errors to learn credible parameter values from observations. However, typical methods use Gaussian error models, which often cannot describe the complex temporal patterns of residuals. Consequently, this results in overconfidence in the identified parameters and, in turn, optimistic reactor designs. Here, we assess the strengths and weaknesses of a method to statistically describe these patterns with autocorrelated error models. This method produces increased widths of the credible prediction intervals following the inclusion of the bias term, in turn leading to more conservative design choices. However, we also show that the augmented error model is not a universal tool, as its application cannot guarantee the desired reliability of the resulting wastewater reactor design.

42 ENGINEERING↗
DOE OSTI2020

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Korea Institute of Energy Research [Abstract]

The Korea Institute of Energy Research (KIER) and the National Energy Technology Laboratory (NETL) intend to collaborate under a CRADA to advance the development of oxy-combustion technology, with an emphasis on process modeling, optimization, and techno-economic analysis. This collaboration will result in the development of a full-scale process model of a commercial oxy-fueled circulating fluid bed combustion (oxy-CFBC) plant, informed from pilot-scale data and built using the Institute for the Design of Advanced Energy Systems (IDAES) process systems engineering framework. It will also generate cost comparisons of the optimized oxyCFBC process with an air-CFBC process with and without carbon capture and sequestration.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Enhancing Early Systems R&D Capabilities with Systems —Theoretic Process Analysis

Systems engineering today faces a wide array of challenges, ranging from new operational environments to disruptive technological — necessitating approaches to improve research and development (R&D) efforts. Yet, emphasizing the Aristotelian argument that the “whole is greater than the sum of its parts” seems to offer a conceptual foundation creating new R&D solutions. Invoking systems theoretic concepts of emergence and hierarchy and analytic characteristics of traceability, rigor, and comprehensiveness is potentially beneficial for guiding R&D strategy and development to bridge the gap between theoretical problem spaces and engineering-based solutions. In response, this article describes systems–theoretic process analysis (STPA) as an example of one such approach to aid in early-systems R&D discussions. STPA—a ‘top-down’ process that abstracts real complex system operations into hierarchical control structures, functional control loops, and control actions—uses control loop logic to analyze how control actions (designed for desired system behaviors) may become violated and drive the complex system toward states of higher risk. By analyzing how needed controls are not provided (or out of sequence or stopped too soon) and unneeded controls are provided (or engaged too long), STPA can help early-system R&D discussions by exploring how requirements and desired actions interact to either mitigate or potentially increase states of risk that can lead to unacceptable losses. This article will demonstrate STPA's benefit for early-system R&D strategy and development discussion by describing such diverse use cases as cyber security, nuclear fuel transportation, and US electric grid performance. Together, the traceability, rigor, and comprehensiveness of STPA serve as useful tools for improving R&D strategy and development discussions. In conclusion, leveraging STPA as well as related systems engineering techniques can be helpful in early R&D planning and strategy development to better triangulate deeper theoretical meaning or evaluate empirical results to better inform systems engineering solutions.

42 ENGINEERING↗
DOE OSTI2021

A generalized machine learning workflow to visualize mechanical discontinuity

Accurate detection and mapping of mechanical discontinuity in materials has widespread industrial and research applications. Herein, we developed a generalized machine-learning framework for visualizing single mechanical discontinuity embedded in material of any composition, velocity, density, porosity, and size with limited data. The proposed visualization of discontinuity requires accurate estimations of the length, location, and orientation of the embedded discontinuity by processing multipoint wave-transmission measurements. k-Wave simulator is used to create a large dataset of elastic waveforms recorded during multi-point wave-transmission measurements through materials containing single mechanical discontinuity. k-Wave simulator considers the wave attenuation, dispersion, and mode conversion in wave motion. Discrete wavelet transform (DWT) and statistical feature extraction are essential for data preprocessing prior to the data-driven model development. DWT also minimizes the effect of noise. Using hyper-parameter tuning and cross validation, gradient boosting regression can visualize the mechanical discontinuity with an accuracy of 0.85, in terms of coefficient of determination. A double-layered neural network-based regression has better performance with an accuracy of 0.95. Use of convolutional neural network converts the predictive task from a waveform processing to an image processing problem. Convolutional neural network achieved a generalization performance of 0.91. The proposed generalized workflow requires robust simulation of wave propagation, signal processing, feature engineering, and model evaluation. Sensors closest to the source and those located opposite the source are the most significant for the desired visualization. Notably, the sensors closest to the source capture the non-linear associations, whereas the sensor on the border opposite to the source capture the linear associations between the measured waveforms and the properties of the mechanical discontinuity.

42 ENGINEERING↗
DOE OSTI2026

Dynamics and observational signatures of core-collapse supernovae with central engines: hydrodynamics simulations with Monte Carlo post-processing

A long-lived central engine embedded in expanding supernova ejecta can alter the dynamics and observational signatures of the event, producing an unusually luminous, energetic, and/or rapidly evolving transient. We use 2D hydrodynamics simulations to study the effect of a central energy source, varying the amount, rate, and isotropy of the energy deposition. We post-process the results with a time-dependent Monte Carlo radiation transport code to extract observational signatures. The engine excavates a bubble at the centre of the ejecta, which becomes Rayleigh–Taylor unstable. Sufficiently powerful engines are able to break through the edge of the bubble and accelerate, shred, and compositionally mix the entire ejecta. The breakout of the engine-driven wind occurs at distinct rupture points, and the outflowing high-velocity gas may eventually give rise to radio emission. The dynamical impact of the engine leads to faster rising optical light curves, with photon escape facilitated by the faster expansion of the ejecta and the opening of low-density channels. For models with strong engines, the spectra are initially hot and featureless, but later evolve to resemble those of broad-line Ic supernovae. Under certain conditions, line emission from ionized, low-velocity material near the centre of the ejecta may be able to escape and produce narrow emission similar to that seen in interacting supernovae. We discuss how variability in the engine energy reservoir and injection rate could give rise to a heterogeneous set of events spanning multiple observational classes, including the fast blue optical transients, broad-line Ic supernovae, and superluminous supernovae.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Opportunities for Process Intensification with Membranes to Promote Circular Economy Development for Critical Minerals

Critical minerals are essential to the future of clean energy, especially energy storage, electric vehicles, and advanced electronics. In this paper, we argue that process systems engineering (PSE) paradigms provide essential frameworks for enhancing the sustainability and efficiency of critical mineral processing pathways. As a concrete example, we review challenges and opportu-nities across material-to-infrastructure scales for process intensification (PI) with membranes. Within critical mineral processing, there is a need to reduce environmental impact, especially con-cerning chemical reagent usage. Feed concentrations and product demand variability require flex-ible, intensified processes. Further, unique feedstocks require unique processes (i.e., no one-size-fits-all recycling or refining system exists). Membrane materials span a vast design space that allows significant optimization. Therefore, there is a need to rapidly identify the best opportunities for membrane implementation, thus informing materials optimization with process and infrastructure scale performance targets. Finally, scale-up must be accelerated and de-risked across the materials-to-process levels to fully realize the opportunity presented by membranes, thereby fostering the development of a circular economy for critical minerals. Tackling these challenges requires integrating efforts across diverse disciplines. We advocate for a holistic molecular-to-systems perspective for fully realizing PI with membranes to address sustainability challenges in critical mineral processing. The opportunities for PI with membranes are excellent applications for emerging research in machine learning, data science, automation, and optimization.

Dougher, Molly↗
DOE OSTI2023

Reaction process involving capillary condensation within a microporous catalyst

Described herein is a catalytic reaction process including introducing one or more gas-phase reactants into a reactor comprising a microporous catalyst having a pore size less than or equal to 2 nm and adjusting the temperature and/or the pressure of the reactor such that one or more of the gas-phase reactants condense within the micropores of the catalyst thereby causing the catalytic reaction to take place in a liquid phase. Additionally, a process for engineering defects on a carboxylate-based metal organic framework (MOF) catalyst is described. The process includes providing a carboxylate-based MOF catalyst; and heating the carboxylate-based MOF catalyst in an inert gas atmosphere at temperatures between about 150° C. and about 900° C.

Aguirrezabal, Iker↗
DOE OSTI2021

High performance protonic ceramic fuel cell systems for distributed power generation

The technology landscape around distributed generation continues to evolve in response to increasing demand for high-efficiency, low-emission, low-cost power generation. While emerging distributed power technologies, such as solid oxide fuel cells (SOFCs), continue to advance, they still face challenges due to their high capital costs, and shorter lifetimes that typically arise from electrochemical stack performance degradation at high operating temperatures (>750 °C). Recent advancements in protonic ceramic fuel cells (PCFCs) offer the potential to mitigate drawbacks of their higher temperature SOFC counterparts by enabling lower operating temperatures (550 °C–600 °C) with acceptable power densities. Here the present work leverages the recent progress in protonic ceramic cell and stack technology development to generate viable system configurations and evaluate the energetic performance potential of PCFC-based systems for stationary power generation. Process system engineering of two water-neutral system concepts, which provide 25 kW of electric power and process hot water, are presented and evaluated through sensitivity studies. Stack design parameters are altered and used to gauge the effect on system performance characteristics, including fuel cell stack and balance-of-plant sizing requirements, and electric and cogeneration efficiencies. The study finds that the potentially high per-pass fuel utilization capability of PCFC stacks could enable unprecedented electric efficiencies approaching 70% without hybridization with other prime movers.

25 ENERGY STORAGE↗
DOE OSTI2020

A Bezier Curve Informed Melt Pool Geometry to Model Additive Manufacturing Microstructures Using SPPARKS

Additive manufacturing is a transformative technology with the potential to manufacture designs which traditional subtractive machining methods cannot. Additive manufacturing offers fast builds at near final desired geometry; however, material properties and variability from part to part remain a challenge for certification and qualification of metallic components. AM induced metallic microstructures are spatially heterogeneous and highly process dependent. Engineering properties such as strength and toughness are significantly affected by microstructure morphologies resulting from the manufacturing process Linking process parameters to microstructures and ultimately to the dynamic response of AM materials is critical to certifying and qualifying AM built parts and components and improving the performance of AM materials. The AM fabrication process is characterized by building parts layer by layer using a selective laser melt process guided by a computer. A laser selectively scans and melts metal according to a designated geometry. As the laser scans, metal melts, fuses, and solidifies forming the final geometry in a layerwise fashion. As the laser heat source moves away, the metal cools and solidifies forming metallic microstructures. This work describes a microstructure modeling application implemented in the SPPARKS kinetic Monte Carlo computational framework for simulating the resulting microstructures. The application uses Bzier curves and surfaces to model the melt pool surface and spatial temperature profile induced by moving the laser heat source; it simulates the melting and fusing of metal at the laser hot spot and microstructure formation and evolution when the laser moves away. The geometry of the melt pool is quite flexible and we explore effects of variances in model parameters on simulated microstructures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Rational Optimization of Microbial Processing for High Yield CO 2 -to-Isopropanol Conversion: Cooperative Research and Development Final Report, CRADA Number CRD-20-17114

This project focuses on the production of the fuel blendstock isopropanol using a CO 2 -fixing Clostridium by metabolic engineering and process optimizations. The project will initiate from a baseline isopropanol producer and pursue isopropanol production at high carbon-conversion efficiency. We will lead engineering work by in-depth pathway analyses including thermodynamics optimization, enzyme expense analysis, metabolic robustness analysis, and -omics analysis. The isopropanol production will be optimized via genome editing followed by fermentation optimizations. This project will deliver a novel microbial process that efficiently converts waste CO 2 to isopropanol at ~g/L titer level within 18-months. This project will layout a solid knowledge basis and technology platform for renewable CO 2 valorization to bio-blendstock that help achieve Co-Optima and Shell's goals.

09 BIOMASS FUELS↗
DOE OSTI2021

Lightweight, strong, moldable wood via cell wall engineering as a sustainable structural material

Turning wood into honeycombs Wood is an attractive material for structural applications, but it usually works best as boards or sheets. Xiao et al . have developed a process for engineering hardwood that allows these sheets to be manipulated into complex structures (see the Perspective by Tajvidi and Gardner). The key is to manipulate the cell wall structure by shrinking and blasting open the fibers and vessels by drying and “water-shocking” them. This process creates a window wherein the wood can be manipulated without ripping or tearing. Honeycomb, corrugated, or other complex structures are locked in once the wood dries. —BG

Science & Technology - Other Topics↗
DOE OSTI2024

The Digital Engineering Vision for DOME: Facilitating Design, Deployment, and Operations [Poster]

DOME is a planned microreactor test facility at INL’s Materials and Fuels Complex. It is a complex system with several interdependent sub-systems such as the reactor (up to 20 MWth), radioactive confinement, temperature and pressure regulation system, ventilation system, etc. The engineering design process for such a system traditionally involves several documents from various sources and the system information is scattered across these documents. Digital engineering represents a paradigm shift through which systems are designed using digital models and integrated data. The digital engineering vision for DOME utilizes a model-based systems engineering (MBSE) approach. The system architecture, physical components, control logic, and verification experiments are all designed using MathWorks MATLAB and Simulink. This hierarchical model can combine data from multiple sources at various levels of abstraction. It can be used to simulate the facility’s operations and to test the system using different sets of parameters. Its capabilities can be expanded by interfacing it with high-fidelity multi-physics models, risk analysis tools, etc. The same model can evolve into a digital twin that can monitor operations and conduct predictive analysis using real-time sensor data from the facility. The eventual goal of this effort is to transform the end-to-end engineering of nuclear facilities in every phase of their lifecycle, including design, deployment, and operations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

SinhaRoy_TechPresentation_2024 [Slides]

DOME is a planned microreactor test facility at INL’s Materials and Fuels Complex. It is a complex system with several interdependent sub-systems such as the reactor (up to 20 MWth), radioactive confinement, temperature and pressure regulation system, ventilation system, etc. The engineering design process for such a system traditionally involves several documents from various sources and the system information is scattered across these documents. Digital engineering represents a paradigm shift through which systems are designed using digital models and integrated data. The digital engineering vision for DOME utilizes a model-based systems engineering (MBSE) approach. The system architecture, physical components, control logic, and verification experiments are all designed using MathWorks MATLAB and Simulink. This hierarchical model can combine data from multiple sources at various levels of abstraction. It can be used to simulate the facility’s operations and to test the system using different sets of parameters. Its capabilities can be expanded by interfacing it with high-fidelity multi-physics models, risk analysis tools, etc. The same model can evolve into a digital twin that can monitor operations and conduct predictive analysis using real-time sensor data from the facility. The eventual goal of this effort is to transform the end-to-end engineering of nuclear facilities in every phase of their lifecycle, including design, deployment, and operations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Direct Air Capture of CO 2 Using Solvents

Large-scale deployment of negative emissions technologies (NETs) that permanently remove CO 2 from the atmosphere is now considered essential for limiting the global temperature increase to less than 2°C by the end of this century. One promising NET is direct air capture (DAC), a technology that employs engineered chemical processes to remove atmospheric carbon dioxide, potentially at the scale of billions of metric tons per year. This review highlights one of the two main approaches to DAC based on aqueous solvents. The discussion focuses on different aspects of DAC with solvents, starting with the fundamental chemistry that includes the chemical species and reactions involved and the thermodynamics and kinetics of CO 2 binding and release. Chemical engineering aspects are also discussed, including air–liquid contactor design, process development, and technoeconomic assessments to estimate the cost of the DAC technologies. Various solvents employed in DAC are reviewed, from aqueous alkaline solutions (NaOH, KOH) to aqueous amines, amino acids, and peptides, along with different solvent regeneration methods, from the traditional thermal swinging to the more exploratory carbonate crystallization with guanidines or electrochemical methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Criticality Safety Evaluation Project Development for University of California Berkely Nuclear Criticality Safety Pipeline Course

The Nuclear Criticality Safety Division at Lawrence Livermore National Laboratory (LLNL) has taken a unique approach to developing criticality safety evaluation topics in support of the University of California Berkeley criticality safety pipeline course. The evaluation topics are designed to go beyond the typical evaluation examples used for many training courses including vault storage and variations on storage arrays. These types of evaluations provide in-depth analysis into the fundamentals of criticality safety and are complex but may be far off from what a new criticality safety engineer may actually be evaluating. To provide more practical examples of criticality safety evaluation topics that are better fit for the knowledge level of a criticality safety engineer in-training, variations of current and future operations and research operations performed at LLNL are used as evaluation topics. Additionally, an emphasis on research is included in all evaluation topics as it allows students to take advantage of the concepts learned in class to apply them for process improvement, engineering equipment that is favorable for criticality safety, and negotiation tactics to work with operations personnel. The process used by LLNL to develop project topics for the pipeline course is provided in this paper. The intent is to provide an alternative technique for training students and potentially younger staff members in criticality safety on developing criticality safety evaluations.

42 ENGINEERING↗
DOE OSTI2022

Impacts of the Additive Manufacturing Process on the Roughness of Engine Scale Vanes and Cooling Channels

Abstract By leveraging the additive manufacturing (AM) platform, development time and costs for turbine component testing can be reduced relative to traditional investment casting. Surface roughness is a key characteristic of the additive manufacturing process that can impact flow, heat transfer, and mechanical integrity of printed components. There are multiple design and build considerations that result in variability in surface roughness, especially when additively fabricating complicated three-dimensional vanes and internal cooling passages. This study characterizes the surface roughness of internal cooling passages, vanes, and flat external surface samples made using additive manufacturing, specifically the direct metal laser sintering process. The samples were manufactured with various wall thicknesses, layer thicknesses, build locations, build directions, and on different AM machines. A combination of computed tomography scanning and optical profilometry was used to evaluate surface roughness levels. The data indicate that the dominant factors in roughness for a given layer thickness are a function of wall thickness, build location, and build direction.

Engineering↗