Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plasma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Excitation of surface plasma waves by an electron beam in a magnetized dusty plasma

An electron beam drives surface plasma waves to instability on a vacuum magnetized dusty plasma interface and in a magnetized dusty plasma cylinder via Cerenkov and fast cyclotron interaction. The dispersion relation of a surface plasma wave has been derived and it has been shown that the phase velocity of waves increases with increase in relative density {delta}(=n{sub i0}/n{sub e0}), where n{sub i0} is the ion plasma density and n{sub e0} is the electron plasma density of negatively charged dust grains. The frequency and the growth rate of the unstable wave instability also increases with {delta}. The growth rate of the instability increases with beam density and scales as the one-third power of the beam density in Cerenkov interaction and is proportional to the square root of beam density in fast cyclotron interaction. The dispersion relation of surface plasma waves has been retrieved from the derived dispersion relation by considering that the beam is absent and there is no dust in the plasma cylinder.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PROTOPLASMA - Proton-driven plasma-wakefield experiment at Fermilab: Stages and approach

Generation of TeV-scale electron beams using conventional RF technology appears expensive for building the next generation of colliders. Proton-driven plasma-wakefield acceleration of electrons promises an alternative route to generate TeV-scale electron beams using existing proton machines. PROTOPLASMA is the proposed R and D project at Fermilab that plans to use a proton beam driven plasma-wakefield to accelerate electrons. The project is planned in stages with the project's path guided by simulations. First, a 60-120 GeV proton beam will be injected into 1-2 meters of plasma to observe selfmodulation instability in the proton beam. Next, an injected 5 MeV electron beam will be accelerated by the plasma. In this paper, we report on the basic project plan and outline our staged approach. We report on first simulation results that show self-modulation of a proton bunch and discuss beam optics requirements and other limits.

43 PARTICLE ACCELERATORS↗

Two-fluid and finite Larmor radius effects on helicity evolution in a plasma pinch

The evolution of magnetic energy, helicity, and hybrid helicity during nonlinear relaxation of a driven-damped plasma pinch is compared in visco-resistive magnetohydrodynamics and two-fluid models with and without the ion gyroviscous stress tensor. Magnetic energy and helicity are supplied via a boundary electric field which initially balances the resistive dissipation, and the plasma undergoes multiple relaxation events during the nonlinear evolution. The magnetic helicity is well conserved relative to the magnetic energy over each event, which is short compared with the global resistive diffusion time. The magnetic energy decreases by roughly 1.5% of its initial value over a relaxation event, while the magnetic helicity changes by at most 0.2% of the initial value. The hybrid helicity is dominated by magnetic helicity in low-β pinch conditions and is also well conserved. Differences of less than 1% between magnetic helicity and hybrid helicity are observed with two-fluid modeling and result from cross helicity evolution. The cross helicity is found to change appreciably due to the first-order finite Larmor radius effects which have not been included in contemporary relaxation theories. The plasma current evolves towards the flat parallel current state predicted by Taylor relaxation theory but does not achieve it. Plasma flow develops significant structure for two-fluid models, and the flow perpendicular to the magnetic field is much more substantial than the flow along it.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collisionless Larmor coupling and blob formation in a laser-plasma expanding into a magnetized ambient plasma

Collisionless Larmor coupling is a fundamental process in space and astrophysical plasmas that enables momentum transfer between an expanding plasma and a magnetized ambient medium. Here, in this paper, we report on the laboratory experimental study of Larmor coupling leading to the formation of a plasma blob associated with a laser-driven, super-Alfvénic plasma flow on the Large Plasma Device at the University of California, Los Angeles. The high-repetition rate enables systematic spatial and temporal scans of the plasma evolution using Doppler spectroscopy, as well as measurements of the magnetic field, electrostatic field, and self-emission of both debris and ambient ions using filtered imaging. We observe the self-focusing of the laser-produced plasma and the formation of a secondary diamagnetic cavity associated with a blob composed of background ions. Doppler spectroscopy reveals the transverse velocity distribution of the background ions, providing direct evidence of ion energization via Larmor coupling. The systematic spatial and temporal scans enabled by the high-repetition-rate experiment allow for a detailed characterization of the ion dynamics. These experimental observations are supported by numerical simulations that provide more insight into the kinetic-scale physics associated with blob formation as well as the role of the ambient plasma density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Model polymer etching and surface modification by a time modulated RF plasma jet: role of atomic oxygen and water vapor

The surface interaction of a well-characterized time modulated radio frequency (RF) plasma jet with polystyrene, poly(methyl methacrylate) and poly(vinyl alcohol) as model polymers is investigated. The RF plasma jet shows fast polymer etching but mild chemical modification with a characteristic carbonate ester and NO formation on the etched surface. By varying the plasma treatment conditions including feed gas composition, environment gaseous composition, and treatment distance, we find that short lived species, especially atomic O for Ar/1% O 2 and 1% air plasma and OH for Ar/1% H 2 O plasma, play an essential role for polymer etching. For O 2 containing plasma, we find that atomic O initiates polymer etching and the etching depth mirrors the measured decay of O atoms in the gas phase as the nozzlesurface distance increases. Here, the etching reaction probability of an O atom ranging from 10 –4 to 10 –3 is consistent with low pressure plasma research. We also find that adding O 2 and H 2 O simultaneously into Ar feed gas quenches polymer etching compared to adding them separately which suggests the reduction of O and OH density in Ar/O 2 /H 2 O plasma.

atomic O↗

Production and diffusion of H 2 O 2 during the interaction of a direct current pulsed atmospheric pressure plasma jet on a hydrogel

The interaction of cold atmospheric pressure plasma jets with hydrogels has been used as a model system to study the interaction of plasmas with tissues. In this study, we analyze the diffusion of reactive oxygen species (in particular H 2 O 2 ) and quantify the amount of plasma-produced H 2 O 2 species that penetrates into a gelatin hydrogel. We show that the diffusion constant of H 2 O 2 in 10% gelatin hydrogel is similar to its diffusion constant in water and that the production of H 2 O 2 in the hydrogel is significantly less than the production of H 2 O 2 in distilled water for the same plasma operation conditions suggesting that the scavenging of OH radicals at the plasma-gel interface significantly reduces the H 2 O 2 production.

60 APPLIED LIFE SCIENCES↗

Low-Temperature Plasma Assisted Kinetics Study of Ethanol

Non-equilibrium plasma assisted kinetics of ethanol at 0.5 atm over a temperature range of 523-1203 K were studied at stoichiometric conditions by using a plasma flow reactor (PFR). The effects of plasma chemistry on fuel and its influence on neutral chemistry is decoupled with both experimental and modelling efforts. Enhanced reactivity was observed experimentally in both plasma-assisted oxidation and pyrolysis cases with fuel consumption beginning at temperatures as low as 523 K. Absolute fuel consumption was observed at temperatures nearly 200 K earlier than pure thermal reactions highlighting the effectiveness of non-equilibrium plasma to promote reactivity. Furthermore, modelling results illustrated the effect of electron impact reactions towards accelerating fuel consumption and promoting low temperature chemistry by generating excited state N2 and reactive O and OH radicals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Cold plasma heating in the plasma sheet boundary layer - Theory and simulations

Satellite observations in recent years have confirmed that the plasma sheet boundary layer is a permanent feature of the earth's magnetotail located between the lobe and central plasma sheet during both quiet and active magnetic periods. Distinct features of the boundary layer include field aligned ion beams and intense electrostatic emissions known as broadband electrostatic noise. Since the plasma sheet boundary layer is a spatial feature of the magnetotail, within it will occur thermal mixing of the resident warm boundary layer plasma with inflowing (convecting) cold ionospheric plasma. A theoretical study involving linear theory and nonlinear numerical particle simulations is presented which examines ion beam instabilities in the presence of a thermally mixed hot and cold background plasma. It is found that the free energy in the ion beams can heat the cool ionospheric plasma to ambient plasma sheet boundary layer temperatures via broadband electrostatic noise. These results, along with recent observational reports that ionospheric outflow can account for measured plasma sheet densities, suggest that the ionospheric role in plasma sheet dynamics and content may be as large as the solar wind.

Schriver, David↗

Simulation of Mini-Magnetospheric Plasma Propulsion (M2P2) Interacting with an External Plasma Wind

Substantial progress has been made over the last year in the development of the laboratory Mini-Magnetospheric Plasma Propulsion (M2P2) prototype. The laboratory testing has shown that that the plasma can be produced at high neutral gas efficiency, at high temperatures (a few tens of eV) with excellent confinement up to the point where chamber wall interactions dominate the physics. This paper investigates the performance of the prototype as it is opposed by an external plasma acting as a surrogate for the solar wind. The experiments were performed in 5ft diameter by 6ft long vacuum chamber at the University of Washington. The solar wind source comprised of a 33 kWe arc jet attached to a 200 kWe inductively generated plasma source. The dual plasma sources allow the interaction to be studied for different power levels, shot duration and production method. It is shown that plasma from the solar wind source (SWS) is able to penetrate the field of the M2P2 magnetic when no plasma is present. With operation of the M2P2 plasma source at only 1.5 kWe, the penetration of the SWS even at the highest power of operation at 200 kWe is stopped. This deflection is shown to be greatly enhanced over that produced by the magnet alone. In addition it is shown that with the presence of the SWS, M2P2 is able to produce enhanced magnetized plasma production out to at least 10 magnet radii where the field strength is only marginally greater than the terrestrial field. The results are consistent with the initial predictions that kWe M2P2 systems would be able to deflect several hundred kWe plasma winds to produce enhanced propulsion for a spacecraft.

Winglee, R. M.↗

Effect of boronization on plasma-facing graphite surfaces and its correlation with the plasma behavior in NSTX-U

Boronization is a Plasma Facing Component (PFC) conditioning technique widely used in tokamak machines. The National Spherical Torus Experiment-Upgrade (NSTX-U) applied this conditioning, using a plasma glow with a deuterated Trimethyl-boron (d-TMB) and He mixture. The use of boronization during the campaign improved the plasma performance, allowing longer plasma discharges and H-mode access. The chemical state of an ATJ graphite sample, used as a proxy for the NSTX-U PFCs, was monitored in-situ using the Materials Analysis Particle Probe (MAPP) diagnostic and X-ray Photoelectron Spectroscopy (XPS). The XPS data showed a progressive rise (from < 5% to 23%) in the oxygen concentration of the boronized ATJ sample as the D+ fluence increased. Filterscopes were used to measure the light emitted by oxygen impurities in the plasma near the surface of the PFC. An increase in the registered magnitude of the OII line, normalized to the Dγ intensity, was observed as the concentration of O on the ATJ surface increased. The plasma performance was found to be strongly correlated to oxygen impurity concentrations at the plasma edge and on the PFC surface, as measured by the discharge length and access to the H-mode regime. In this work, we present a quantitative analysis of the evolution of the chemistry of the ATJ surface, and the oxygen presence in the plasma-material interface, and report relevant plasma parameters observed during the same period of time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time-resolved imaging of atoms and molecules in laser-produced uranium plasmas

Gas-phase oxidation of uranium (U), plume chemistry, and its impact on optical emission features of the uranium plasma are investigated. Plasmas were produced via nanosecond laser ablation of a natural uranium target in a chamber where uranium oxidation was controlled by varying the oxygen partial pressure within argon cover gas. Monochromatic imaging of uranium atoms and monoxide molecules was performed using narrowband optical filters, which clearly reveals the spatio-temporal evolution of these species in the plasma. Uranium oxides are found to be formed at the plasma edges, where lower temperatures favor molecular recombination. Segregation between the distribution of uranium atoms and monoxide species is observed at later times of plasma evolution, and is more apparent at lower oxygen partial pressures. At higher oxygen partial pressures, significant variation in plume morphology is noticed for UO species, which is attributed to higher rate of oxide (UxOy) formation at the plume edges. The monochromatic images of U atoms and molecules and corresponding spectral features at various oxygen partial pressures presented here provide a unique insight into gas-phase, high-temperature uranium oxidation, and its chemistry and have implications for a wide range of nuclear applications, from stand-off detection of radioisotopes to forensics and safeguards.

(140.3440) Laser-induced breakdown, (280.4788) Opt↗

Mechanism of plasma-induced damage to low-k SiOCH films during plasma ashing of organic resists

Plasma-induced damage to porous SiOCH (p-SiOCH) films during organic resist film ashing using dual-frequency capacitively coupled O{sub 2} plasmas was investigated using the pallet for plasma evaluation method developed by our group. The damage was characterized by ellipsometry and Fourier-transform infrared spectroscopy. Individual and synergetic damage associated with vacuum ultraviolet (VUV) and UV radiation, radicals, and ions in the O{sub 2} plasma were clarified. It was found that the damage was caused not only by radicals but also by synergetic reactions of radicals with VUV and UV radiation emitted by the plasmas. It is noteworthy that the damage induced by plasma exposure without ion bombardment was larger than the damage with ion bombardment. These results differed from those obtained using an H{sub 2}/N{sub 2} plasma for resist ashing. Finally, the mechanism of damage to p-SiOCH caused by O{sub 2} and H{sub 2}/N{sub 2} plasma ashing of organic resist films is discussed. These results are very important in understanding the mechanism of plasma-induced damage to p-SiOCH films.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of the nonthermal plasma shielding on the ion collisions in Lorentzian semiclassical plasmas

The influence of the nonthermal plasma shielding on the elastic ion-ion collision is investigated in dense Lorentzian semiclassical plasmas. The effective interaction potential and phase theory are applied to obtain the scattering phase shift and collision cross section as functions of the spectral index of the Lorentzian plasma, impact parameter, collision energy, and plasma parameters. The result shows that the nonthermal plasma shielding effect reduces the magnitude of the scattering phase shift. It is also found that the nonthermal plasma shielding effect suppresses the ion-ion collision cross section. Hence, we have found that the ion-ion collision cross sections in thermal plasmas are always greater than those in nonthermal plasmas. In addition, it is found that the nonthermal shielding effect on the collision cross section increases with an increase of the Debye length in Lorentzian semiclassical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Motion of the plasma critical layer during relativistic-electron laser interaction with immobile and comoving ion plasma for ion acceleration

We analyze the motion of the plasma critical layer by two different processes in the relativistic-electron laser-plasma interaction regime (a{sub 0}>1). The differences are highlighted when the critical layer ions are stationary in contrast to when they move with it. Controlling the speed of the plasma critical layer in this regime is essential for creating low-β traveling acceleration structures of sufficient laser-excited potential for laser ion accelerators. In Relativistically Induced Transparency Acceleration (RITA) scheme, the heavy plasma-ions are fixed and only trace-density light-ions are accelerated. The relativistic critical layer and the acceleration structure move longitudinally forward by laser inducing transparency through apparent relativistic increase in electron mass. In the Radiation Pressure Acceleration (RPA) scheme, the whole plasma is longitudinally pushed forward under the action of the laser radiation pressure, possible only when plasma ions co-propagate with the laser front. In RPA, the acceleration structure velocity critically depends upon plasma-ion mass in addition to the laser intensity and plasma density. In RITA, mass of the heavy immobile plasma-ions does not affect the speed of the critical layer. Inertia of the bared immobile ions in RITA excites the charge separation potential, whereas RPA is not possible when ions are stationary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Capillary plasma jet: A low volume plasma source for life science applications

In this letter, we present results from multispectroscopic analysis of protein films, after exposure to a peculiar plasma source, i.e., the capillary plasma jet. This plasma source is able to generate very small pulsed plasma volumes, in kilohertz range, with characteristic dimensions smaller than 1 mm. This leads to specific microscale generation and transport of all plasma species. Plasma diagnosis was realized using general electrical and optical methods. Depending on power level and exposure duration, this miniature plasma jet can induce controllable modifications to soft matter targets. Detailed discussions on protein film oxidation and chemical etching are supported by results from absorption, X-ray photoelectron spectroscopy, and microscopy techniques. Further exploitation of principles presented here may consolidate research interests involving plasmas in biotechnologies and plasma medicine, especially in patterning technologies, modified biomolecule arrays, and local chemical functionalization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen plasma dynamics in the spherical theta pinch plasma target for heavy ion stripping

Due to the superior ability of dense and highly ionised plasmas to ionise penetrating heavy ion beams to degrees beyond those reachable by common gas strippers, many experiments have been performed to find suitable plasma generators for this application. In the field of gas discharges, mainly z-pinch devices have been investigated so far, which are known to be limited by the nonlinear focusing effects of the plasma columns sustaining current and by electrode erosion. The spherical theta pinch has therefore been proposed as a substitution for the z-pinch, promising progress by inductive rather than capacitive coupling and displacement of the outer magnetic field by the dense, diamagnetic discharge plasma. As yet mainly experiments with argon/hydrogen mixture gas have been performed, which is not suitable for the application as a plasma stripper, this paper describes the first detailed analysis of the plasma parameters and dynamics of a hydrogen plasma created by the spherical theta pinch. These include the time integrated and time resolved electron density, the dynamics of the plasma in the discharge vessel, the comparison with the argon dominated plasma, and an outlook to reachable characteristics with similar devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exploring the crossover between high-energy-density plasma and ultracold neutral plasma physics

In this paper, we present ideas that were part of the miniconference on the crossover between High Energy Density Plasmas (HEDP) and Ultracold Neutral Plasmas (UNPs) at the 60th Annual Meeting of the American Physical Society Division of Plasma Physics, November 2018. We give an overview of UNP experiments with an emphasis on measurements of the time-evolving ion density and velocity distributions, the electron-ion thermalization rate, and plasma self-assembly—all just inside the strongly coupled plasma regime. We also present theoretical and computational models that were developed to understand a subset of HEDP experiments. However, because HEDP experiments display similar degrees of strong coupling, many aspects of these models can be vetted using precision studies of UNPs. This comparison is important because some statistical assumptions used for ideal plasmas are of questionable validity in the strongly coupled plasma regime. We summarize two theoretical approaches that extend kinetic theories into the strong-coupling regime and show good agreement for momentum transfer and self-diffusion. As capabilities improve, both computationally and experimentally, UNP measurements may help guide the ongoing development of HEDP-appropriate plasma models. Future opportunities in viscosity, energy relaxation, and magnetized plasmas are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of turbulence-driven plasma flow and origin of experimental empirical scalings of intrinsic rotation

Toroidal plasma flow driven by turbulent torque associated with nonlinear residual stress generation is shown to recover the observed key features of intrinsic rotation in experiments. In particular, the turbulence-driven intrinsic rotation scales close to linearly with plasma gradients and the inverse of the plasma current, qualitatively reproducing empirical scalings obtained from a large experimental data base. The effect of magnetic shear on the symmetry breaking in the parallel wavenumber spectrum is identified. The basis of the current scaling is found to be the enhanced k ∥ symmetry breaking induced by increased radial variation of the safety factor as the current decreases. The physics origin for the linear dependence of intrinsic rotation on the pressure gradient comes from the fact that both turbulence intensity and the zonal flow shear, which are two key ingredients for driving the residual stress, are increased with the strength of the turbulence drives, which are $R/L_{T_{e}}$ and $R/L_{n_{e}}$ for the collisionless trapped electron mode (CTEM). Highlighted results also include robust radial pinches in toroidal flow, heat and particle transport driven by CTEM turbulence, which emerge “in phase,” and are shown to play important roles in determining plasma profiles. Moreover discussed are the experimental tests proposed to validate findings from these gyrokinetic simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗