SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thin cover of corrosion-resistant steel (CRES) protects metal bellows and ducts against hydrogen embrittlement. Bellow current carries hydrogen at high pressure and currently is used in the engine of Space Shuttle.
Twenty-seven 2 times 2 sq cm (AlGa)As-GaAs solar cells were fabricated and subjected to 50 keV, 100 keV, and 290 keV of proton irradiation along with eighteen high efficiency silicon solar cells. The results of the study further corroborate the advantages for space missions offered by GaAs cells over state of the art silicon cells. Thus, even though the GaAs cells showed greater degradation when irradiated by protons with energy less than 5 MeV, the solar cells were normally protected from these protons by the glass covers used in space arrays. The GaAs cells also offered superior end of life power capability compared with silicon. The change in the open circuit voltage, short circuit current, spectral response, and dark 1-5 characteristics after irradiation at each proton energy and fluence were found to be consistent with the explanation of the effect of the protons. Also dark 1-5 characteristics showed that a new recombination center dominates the current transport mechanism after irradiation.
The Space Transportation System (STS) is discussed, including the launch processing system, the thermal protection subsystem, meteorological research, sound supression water system, rotating service structure, improved hypergol or removal systems, fiber optics research, precision positioning, remote controlled solid rocket booster nozzle plugs, ground operations for Centaur orbital transfer vehicle, parachute drying, STS hazardous waste disposal and recycle, toxic waste technology and control concepts, fast analytical densitometry study, shuttle inventory management system, operational intercommunications system improvement, and protective garment ensemble. Terrestrial applications are also covered, including LANDSAT applications to water resources, satellite freeze forecast system, application of ground penetrating radar to soil survey, turtle tracking, evaluating computer drawn ground cover maps, sparkless load pulsar, and coupling a microcomputer and computing integrator with a gas chromatograph.
Lightning strikes to aerospace vehicles occur mainly in or near clouds. As the Galileo entry probe will pass most of its operational life in the clouds of Jupiter, which is known to have lightning activity, the present study is concerned with the risk of a lightning strike to the probe. A strike to the probe could cause physical damage to the structure and/or damage to the electronic equipment aboard the probe. It is thought to be possible, for instance, that the instrument failures which occurred on all four Pioneer Venus entry probes at an altitude of 12 km were due to an external electric discharge. The probability of a lightning strike to the Galileo probe is evaluated. It is found that the estimate of a strike to the probe is only 0.001, which is about the same as the expected failure rate due to other design factors. In the case of entry probes to cloud-covered planets, a consideration of measures for protecting the vehicle and its payload from lightning appears to be appropriate.
Two reports present additional information on electrical-resistance strain gauges described in "High-Temperature Resistance Strain Gauges" (LEW-15379). For protection against oxidation at high temperatures, gauges covered, by flame spraying, with coats of alumina containing up to 1 weight percent of yttria or, perferably, containing 4 to 6 weight percent of zirconia.
Thick rubber components are employed by the Army to carry large loads. In tanks, rubber covers road wheels and track systems to protect roadways. It is difficult for design engineers to simulate the details of the hysteretic heating for large strain viscoelastic deformations. In this study, an approximation to the viscoelastic energy dissipated per unit time is investigated for use in estimating mechanically induced viscoelastic heating. Coupled thermo-mechanical simulations of large cyclic deformations of rubber cylinders are presented. The cylinders are first compressed axially and then cyclically loaded about the compressed state. Details of the algorithm and some computational issues are discussed. The coupled analyses are conducted for tall and short rubber cylinders both with and without imbedded metal disks.
The Lightweight Integrated Solar Array and Transceiver (LISA-T) experiment consists of thin-film, low mass, low volume solar panels. Given the variety of thin solar cells and cover materials and the lack of environmental protection typically afforded by thick coverglasses, a series of tests were conducted in Marshall Space Flight Center's Space Environmental Effects Facility to evaluate the performance of these materials. Candidate thin polymeric films and nitinol wires used for deployment were also exposed. Simulated space environment exposures were selected based on SSP 30425 rev. B, "Space Station Program Natural Environment Definition for Design" or AIAA Standard S-111A-2014, "Qualification and Quality Requirements for Space Solar Cells." One set of candidate materials were exposed to 5 eV atomic oxygen and concurrent vacuum ultraviolet (VUV) radiation for low Earth orbit simulation. A second set of materials were exposed to 1 MeV electrons. A third set of samples were exposed to 50, 100, 500, and 700 keV energy protons, and a fourth set were exposed to >2,000 hours of near ultraviolet (NUV) radiation. A final set was rapidly thermal cycled between -55 and +125 C. This test series provides data on enhanced power generation, particularly for small satellites with reduced mass and volume resources. Performance versus mass and cost per Watt is discussed.
The Lightweight Integrated Solar Array and Transceiver (LISA-T) experiment consists of thin-film, low mass, low volume solar panels. Given the variety of thin solar cells and cover materials and the lack of environmental protection afforded by typical thick coverglasses, a series of tests were conducted in Marshall Space Flight Center's Space Environmental Effects Facility to evaluate the performance of these materials. Candidate thin polymeric films and nitinol wires used for deployment were also exposed. Simulated space environment exposures were selected based on SSP 30425 rev. B, "Space Station Program Natural Environment Definition for Design" or AIAA Standard S-111A-2014, "Qualification and Quality Requirements for Space Solar Cells." One set of candidate materials were exposed to 5 eV atomic oxygen and concurrent vacuum ultraviolet (VUV) radiation for low Earth orbit simulation. A second set of materials were exposed to 1 MeV electrons. A third set of samples were exposed to 50, 500, and 750 keV energy protons, and a fourth set were exposed to >2,000 hours of ultraviolet radiation. A final set was rapidly thermal cycled between -50 and +120 C. This test series provides data on enhanced power generation, particularly for small satellites with reduced mass and volume resources. Performance versus mass and cost per Watt is discussed.
The Lightweight Integrated Solar Array and Transceiver (LISA-T) experiment consists of thin-film, low mass, low volume solar panels. Given the variety of thin solar cells and cover materials and the lack of environmental protection typically afforded by thick coverglasses, a series of tests were conducted in Marshall Space Flight Center's Space Environmental Effects Facility to evaluate the performance of these materials. Candidate thin polymeric films and nitinol wires used for deployment were also exposed. Simulated space environment exposures were selected based on SSP 30425 rev. B, "Space Station Program Natural Environment Definition for Design" or AIAA Standard S-111A-2014, "Qualification and Quality Requirements for Space Solar Cells." One set of candidate materials were exposed to 5 eV atomic oxygen and concurrent vacuum ultraviolet (VUV) radiation for low Earth orbit simulation. A second set of materials were exposed to 1 MeV electrons. A third set of samples were exposed to 50, 100, 500, and 700 keV energy protons, and a fourth set were exposed to >2,000 hours of near ultraviolet (NUV) radiation. A final set was rapidly thermal cycled between -55 and +125degC. This test series provides data on enhanced power generation, particularly for small satellites with reduced mass and volume resources. Performance versus mass and cost per Watt is discussed.
The National Aeronautics and Space Act of 1958 directed the annual Aeronautics and Space Report to include a "comprehensive description of the programmed activities and the accomplishments of all agencies of the United States in the field of aeronautics and space activities during the preceding calendar year. In recent years, the reports have been prepared on a fiscal year (FY) basis, consistent with the budgetary period now used in programs of the Federal Government. This year's report covers activities that took place from October 1, 1997, through September 30, 1998. The activities of agencies included are NASA, the Department of Defense, The Federal Aviation Administration, the Department of Commerce, the Department of the Interior, the Federal Communications Commission, the Department of Agriculture, the National Science Foundation, the Department of State, the Department of Energy, the Smithsonian Institution, the Arms Control and Disarmament Agency, the Environmental Protection Agency, and the U.S. Information Agency. Appendices cover the U.S. Government Spacecraft Record, World Record of Space Launches Successful in Attaining Earth Orbit or Beyond , Successful Launches to Orbit on U.S. Launch Vehicles, October 1, 1997-September 30, 1998, U.S. and Russian Human Space Flights, 1961-September 30, 1998, U.S. Space Launch Vehicles, Space Activities of the U.S. Government-Historical Budget Summary, Space Activities of the U.S. Government-Budget Authority in Equivalent FY 1998 Dollars, Federal Space Activities Budget, Federal Aeronautics Budget, and a glossary
Despite covering a small portion of Earth’s surface, streams support a disproportionate amount of biodiversity. Here, we measure progress against the Global Biodiversity Framework 30×30 protection target for streams within the conterminous U.S., in terms of quantity, representation, and effectiveness of habitat protection under primarily land-based protection strategies. We evaluated the geophysical and biogeographical diversity of streams falling under protection measures. Additionally, we expose a paradox of streams being protected yet simultaneously impaired from human disturbances. Without considering impairment, approximately 30% of streams are currently protected through land-based conservation of their local or upstream watersheds; when considering impairment, only 9% to 28% of streams are truly protected from disturbances depending on impairment thresholds and protection criteria. Furthermore, despite protection approaching 30×30 targets, only 5% of the most prevalent physical stream habitat types are protected. We provide a targeted protection strategy, overcoming the impairment paradox and ensuring adequate representation of streams.
Solar cell performance and radiation resistance is improved by application of 1-mil thickness of Teflon FEP protective material. Cells produce 30 percent more power than similar cells with conventional Kapton covers.
This oral presentation will be given at the 13th International Planetary Probe Workshop on June 14th, 2016 and will cover the drivers for reliability and the challenges faced in selecting and designing the thermal protection system (TPS). In addition, an assessment is made on new emerging TPS related technologies that could help with designs to meet the planetary protection requirements to prevent backward (Earth) contamination by biohazardous samples.
Topics covered include: Risk assessment of hazardous materials, Automated systems for pollution prevention and hazardous materials elimination, Study design for the toxicity evaluation of ammonium perchlorate, Plasma sprayed bondable stainless surface coatings, Development of CFC-free cleaning processes, New fluorinated solvent alternatives to ozone depleting solvents, Cleaning with highly fluorinated liquids, Biotreatment of propyleneglycol nitrate by anoxic denitrification, Treatment of hazardous waste with white rot fungus, Hydrothermal oxidation as an environmentally benign treatment technology, Treatment of solid propellant manufacturing wastes by base hydrolysis, Design considerations for cleaning using supercritical fluid technology, and Centrifugal shear carbon dioxide cleaning.
Woody plants play a major role for the resilience of drylands and in peoples' livelihoods. However, due to their scattered distribution, quantifying and monitoring woody cover over space and time is challenging. We develop a phenology driven model and train/validate MODIS (MCD43A4, 500m) derived metrics with 178 ground observations from Niger, Senegal and Mali to estimate woody cover trends from 2000 to 2014 over the entire Sahel. The annual woody cover estimation at 500 m scale is fairly accurate with an RMSE of 4.3 (woody cover %) and r(exp 2) = 0.74. Over the 15 year period we observed an average increase of 1.7 (+/- 5.0) woody cover (%) with large spatial differences: No clear change can be observed in densely populated areas (0.2 +/- 4.2), whereas a positive change is seen in sparsely populated areas (2.1 +/- 5.2). Woody cover is generally stable in cropland areas (0.9 +/- 4.6), reflecting the protective management of parkland trees by the farmers. Positive changes are observed in savannas (2.5 +/- 5.4) and woodland areas (3.9 +/- 7.3). The major pattern of woody cover change reveals strong increases in the sparsely populated Sahel zones of eastern Senegal, western Mali and central Chad, but a decreasing trend is observed in the densely populated western parts of Senegal, northern Nigeria, Sudan and southwestern Niger. This decrease is often local and limited to woodlands, being an indication of ongoing expansion of cultivated areas and selective logging.We show that an overall positive trend is found in areas of low anthropogenic pressure demonstrating the potential of these ecosystems to provide services such as carbon storage, if not over-utilized. Taken together, our results provide an unprecedented synthesis of woody cover dynamics in theSahel, and point to land use and human population density as important drivers, however only partially and locally offsetting a general post-drought increase.
Central America faces increasing challenges of deforestation and habitat fragmentation with complex drivers. Protected areas are one response to these challenges, forming a continuous forest stand subject to national conservation systems and laws. As part of a novel shared-management model, both the community of Santa María Tzejá and the Protected Areas Council of Guatemala (CONAP in Spanish) co-manage Cerro Cantil, a protected area in the Ixcán department of northwestern Guatemala covering approximately 314 ha. The SERVIR program, a joint initiative between NASA and USAID, in partnership with leaders from Santa María Tzejá, began a pilot project to explore how the integration of satellite remote sensing can support forest and biodiversity monitoring and contribute to the community’s reporting requirements. To assess Cerro Cantil’s potential role to protect endemic species between three larger protected areas, we model least cost corridors between Cerro Cantil and Laguna Lachuá, Visi Cabá, and Montes Azules for Alouatta pigra (Black Howler Monkey). Additionally, we evaluate the potential contribution of a forestry-conservation incentives program (PROBOSQUE) to stem fragmentation and support biodiversity by assessing the forest area overlapping both the modeled corridors and plots belonging to families enrolled in PROBOSQUE. Results contribute to community understanding of the value of Cerro Cantil to protect local biodiversity as well as the interaction of a forestry incentive program and protected area designation.
Los Alamos National Laboratory (LANL, or the Laboratory) produced a Vulnerability Assessment and Resilience Plan (VARP) following Department of Energy (DOE) Guidance to assess and manage climate change related risks to the Laboratory’s assets and operations. This is a condensed summary of the Laboratory’s 2022 VARP – the full version of the document is not publicly available at this time. The VARP was led by the Pollution Prevention (P2) Program in the Environmental Protection and Compliance Division (EPC-DO) and covers the entirety of the 36-square-mile LANL site in Los Alamos, New Mexico. A Steering Committee, composed of representatives from the three main Laboratory Directorates and the Los Alamos Field Office, identified real property Critical Assets based on their Mission Dependency Index (MDI) scores. LANL used MDI scores of 70 and above, which are considered Mission-Critical, to generate a list of 141 Critical Asset facilities.
OART research projects covering space shuttle, vehicle configuration, heat transfer, thermal protection, lifting bodies, electronics, power studies, etc