Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POSITRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Comparison of direct and indirect positron-generation by an ultra-intense femtosecond laser

An extensive comparison of the properties of positron beams produced by an ultra-intense femtosecond laser in direct and indirect schemes has been performed with two-dimensional particle-in-cell and Monte Carlo simulations. It is shown that the positron beam generated in the indirect scheme has a higher yield (10{sup 10}), a higher temperature (28.8 MeV), a shorter pulse duration (5 ps), and a smaller divergence (8°) than in the direct case (10{sup 9} yield, 4.4 MeV temperature, 40 ps pulse duration, and 60° divergence). In addition, it was found that the positron/gamma ratio in the indirect scheme is one order of magnitude higher than that in the direct one, which represents a higher signal/noise ratio in positron detection. Nevertheless, the direct generation method still has its own unique advantage, the so-called target normal sheath acceleration, which can result in quasi-monoenergetic positron beams that may serve in some specialized applications.

07 ISOTOPE AND RADIATION SOURCES↗

Beam Collimation Studies for the ILC Positron Source

Results of the collimation studies for the ILC positron source beam line are presented. The calculations of primary positron beam loss are done using the ELEGANT code. The secondary positron and electron beam loss, the synchrotron radiation along the beam line and the bremsstrahlung radiation in the collimators are simulated using the STRUCT code. The first part of the collimation system, located right after the positron source target (0.125 GeV), is used for protection of the RF Linac sections from heating and radiation. The second part of the system is used for final collimation before the beam injection into the Damping Ring at 5 GeV. The calculated power loss in the collimation region is within 100 W/m, with the loss in the collimators of 0.2-5 kW. The beam transfer efficiency from the target to the Damping Ring is 13.5%.

43 PARTICLE ACCELERATORS↗

Acceleration of a trailing positron bunch in a plasma wakefield accelerator

High gradients of energy gain and high energy efficiency are necessary parameters for compact, cost-efficient and high-energy particle colliders. Plasma Wakefield Accelerators (PWFA) offer both, making them attractive candidates for next-generation colliders. Here in these devices, a charge-density plasma wave is excited by an ultra-relativistic bunch of charged particles (the drive bunch). The energy in the wave can be extracted by a second bunch (the trailing bunch), as this bunch propagates in the wake of the drive bunch. While a trailing electron bunch was accelerated in a plasma with more than a gigaelectronvolt of energy gain, accelerating a trailing positron bunch in a plasma is much more challenging as the plasma response can be asymmetric for positrons and electrons. We report the demonstration of the energy gain by a distinct trailing positron bunch in a plasma wakefield accelerator, spanning nonlinear to quasi-linear regimes, and unveil the beam loading process underlying the accelerator energy efficiency. A positron bunch is used to drive the plasma wake in the experiment, though the quasi-linear wake structure could as easily be formed by an electron bunch or a laser driver. Finally, the results thus mark the first acceleration of a distinct positron bunch in plasma-based particle accelerators.

43 PARTICLE ACCELERATORS↗

Temperature effects in plasma-based positron acceleration schemes using electron filaments

Preserving the quality of a positron beam in a plasma-based accelerator, where a wakefield suitable for positron transport and acceleration is generated by means of an electron filament, is challenging. This is due to the nature of the wakefields, characterized by focusing fields that vary nonlinearly in the transverse direction, and by accelerating fields that are non-uniform. These fields also change slice-by-slice along the beam. Maintaining a high beam quality is pivotal for application of positron beams in a plasma-based collider. In this paper, we show that an initial background plasma temperature can help mitigate the positron beam quality degradation in plasma-based accelerators that rely on electron filaments. We show that temperature effects broaden the electron filament and smooth radially both the non-linear transverse and the non-uniform longitudinal wakefields. Using warm plasmas opens up new possibilities to improve beam quality in several plasma-based positron acceleration concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermonuclear supernovae: probing magnetic fields by positrons and late-time IR line profiles

We show the importance of γ and positron transport for the formation of late-time spectra in Type Ia supernovae (SNe Ia). The goal is to study the imprint of magnetic fields (B) on late-time IR line profiles, particularly the [Fe II] feature at 1.644 μm, which becomes prominent two to three months after the explosion. As a benchmark, we use the explosion of a Chandrasekhar mass (M {sub Ch}) white dwarf (WD) and, specifically, a delayed detonation model that can reproduce the light curves and spectra for a Branch-normal SN Ia. We assume WDs with initial magnetic surface fields between 1 and 10{sup 9} G. We discuss large-scale dipole and small-scale magnetic fields. We show that positron transport effects must be taken into account for the interpretation of emission features starting at about one to two years after maximum light, depending on the size of B. The [Fe II] line profile and its evolution with time can be understood in terms of the overall energy input by radioactive decay and the transition from a γ-ray to a positron-dominated regime. We find that the [Fe II] line at 1.644 μm can be used to analyze the overall chemical and density structure of the exploding WD up to day 200 without considering B. At later times, positron transport and magnetic field effects become important. After about day 300, the line profile allows one to probe the size of the B-field. The profile becomes sensitive to the morphology of B at about day 500. In the presence of a large-scale dipole field, a broad line is produced in M {sub Ch} mass explosions that may appear flat-topped or rounded depending on the inclination at which the SN is observed. Small or no directional dependence of the spectra is found for small-scale B. We note that narrow-line profiles require central {sup 56}Ni as shown in our previous studies. Persistent broad-line, flat-topped profiles require high-density burning, which is the signature of a WD close to M {sub Ch}. Good time coverage is required to separate the effects of optical depth, the size and morphology of B, and the aspect angle of the observer. The spectra require a resolution of about 500 km s{sup –1} and a signal-to-noise ratio of about 20%. Two other strong near-IR spectral features at about 1.5 and 1.8 μm are used to demonstrate the importance of line blending, which may invalidate a kinematic interpretation of emission lines. Flat-topped line profiles between 300 and 400 days have been observed and reported in the literature. They lend support for M {sub Ch} mass explosions in at least some cases and require magnetic fields equal to or in excess of 10{sup 6} G. We briefly discuss the effects of the size and morphology of B on light curves, as well as limitations. We argue that line profiles are a more direct measurement of B than light curves because they measure both the distribution of {sup 56}Ni and the redistribution of the energy input by positrons rather than the total energy input. Finally, we discuss possible mechanisms for the formation of high B-fields and the limitations of our analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

Positron annihilation spectroscopy investigation of vacancy defects in neutron-irradiated 3 C -SiC

We described positron annihilation spectroscopy characterization results for neutron-irradiated 3 C -SiC, with a specific focus on explaining the size and character of vacancy clusters as a complement to the current understanding of the neutron irradiation response of 3 C -SiC. Positron annihilation lifetime spectroscopy was used to capture the irradiation temperature and dose dependence of vacancy defects in 3 C -SiC following neutron irradiation from 0.01 to 31 dpa in the temperature range from 380C °to 790C .° The neutral and negatively charged vacancy clusters were identified and quantified. The results suggest that the vacancy defects that were measured by positron annihilation spectroscopy technique contribute very little to the transient swelling of SiC. Additionally, we used coincidence Doppler broadening measurement to investigate the chemical identity surrounding the positron trapping sites.Finally, we found that silicon vacancy-related defects dominate in the studied materials and the production of the antisite defect C Si may result in an increase in the probability of positron annihilation with silicon core electrons.

36 MATERIALS SCIENCE↗

Utilizing cosmic-ray positron and electron observations to probe the averaged properties of Milky Way pulsars

Pulsars have long been studied in the electromagnetic spectrum. Their environments are rich in high-energy cosmic-ray electrons and positrons likely enriching the interstellar medium with such particles. In this work we use recent cosmic-ray observations from the AMS-02, CALET and DAMPE collaborations to study the averaged properties of the local Milky Way pulsar population. We perform simulations of the local Milky Way pulsar population, for interstellar medium assumptions in agreement with a range of cosmic-ray nuclei measurements. Each such simulation contains $\sim 10^{4}$ pulsars of unique age, location, initial spin-down power and cosmic-ray electron/positron spectra. We produce more than $7 \times 10^3$ such Milky Way pulsar simulations. Further, we account for and study i) the pulsars' birth rates and the stochastic nature of their birth, ii) their initial spin-down power distribution, iii) their time evolution in terms of their braking index and characteristic spin-down timescale, iv) the fraction of spin-down power going to cosmic-ray electrons and positrons and v) their propagation through the interstellar medium and the Heliosphere. We find that pulsars of ages $\sim 10^{5}-10^{7}$ yr, have a braking index that on average has to be 3 or larger. Given that electromagnetic spectrum observations of young pulsars find braking indices lower than 3, our work provides strong hints that pulsars' braking index increases on average as they age, allowing them to retain some of their rotational energy. Moreover, we find that pulsars have relatively uniform properties as sources of cosmic-ray electrons and positrons in terms of the spectra they produce and likely release $O(10\%)$ of their rotational energy to cosmic rays in the ISM. Finally, we find at $\simeq$12 GeV positrons a spectral feature that suggests a new subpopulation of positron sources contributing at these energies.

79 ASTRONOMY AND ASTROPHYSICS↗

Production of Highly Polarized Positrons Using Polarized Electrons at MeV Energies

The Polarized Electrons for Polarized Positrons experiment at the injector of the Continuous Electron Beam Accelerator Facility has demonstrated for the first time the efficient transfer of polarization from electrons to positrons produced by the polarized bremsstrahlung radiation induced by a polarized electron beam in a high-Z target. Positron polarization up to 82% have been measured for an initial electron beam momentum of 8.19~MeV/c, limited only by the electron beam polarization. We report that this technique extends polarized positron capabilities from GeV to MeV electron beams, and opens access to polarized positron beam physics to a wide community.

43 PARTICLE ACCELERATORS↗

High Efficiency Uniform Wakefield Acceleration of a Positron Beam Using Stable Asymmetric Mode in a Hollow Channel Plasma

Plasma wakefield acceleration in the blowout regime is particularly promising for high-energy acceleration of electron beams because of its potential to simultaneously provide large acceleration gradients and high energy transfer efficiency while maintaining excellent beam quality. However, no equivalent regime for positron acceleration in plasma wakes has been discovered to date. We show that after a short propagation distance, an asymmetric electron beam drives a stable wakefield in a hollow plasma channel that can be both accelerating and focusing for a positron beam. A high charge positron bunch placed at a suitable distance behind the drive bunch can beam-load or flatten the longitudinal wakefield and enhance the transverse focusing force, leading to high efficiency and narrow energy spread acceleration of the positrons. Three-dimensional quasistatic particle-in-cell simulations show that an over 30% energy extraction efficiency from the wake to the positrons and a 1% level energy spread can be simultaneously obtained. Further optimization is feasible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of Positron Capture at Ce+BAF

We present a capture concept for the continuous wave (CW) polarized positron injector for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (Ce+BAF). This two-step concept is based on (1) the generation of bremsstrahlung radiation by a longitudinally polarized electron beam 1 mA, 120 MeV, 90% polarization), passing through a tungsten target, and (2) the production of e+e--pairs by these bremsstrahlung photons in the same target. To provide highly-polarized positron beams (>60% polarization) or high-current positron beams (>1 µA) with low polarization for nuclear physics experiments, the positron source requires a flexible capture system with an adjustable energy selection band. The results of beam dynamics simulations and calculations of the power deposited in the positron capture section are presented.

Ushakov, Andriy↗

Jefferson Lab Positron Program

The Jefferson Lab Polarized Electrons for Polarized Positrons (PEPPo) experiment demonstrated that it is possible to make polarized positrons with the polarized electron beam at CEBAF. Jefferson Lab is now looking to develop a dedicated positron source that will be able to feed the CEBAF accelerator with polarized positrons and deliver up to 11 GeV positrons to the experimental halls. I will present the plans for this new source as well as present an overview of the scientific program that is planned with this new source.

Higinbotham, Douglas↗

Simulations of Positron Capture at Ce+BAF

We present a capture concept for the continuous wave (CW) polarized positron injector for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (Ce+BAF). This two-step concept is based on (1) the generation of bremsstrahlung radiation by a longitudinally polarized electron beam 1 mA, 120 MeV, 90% polarization), passing through a tungsten target, and (2) the production of e+e--pairs by these bremsstrahlung photons in the same target. To provide highly-polarized positron beams (>60% polarization) or high-current positron beams (>1 µA) with low polarization for nuclear physics experiments, the positron source requires a flexible capture system with an adjustable energy selection band. The results of beam dynamics simulations and calculations of the power deposited in the positron capture section are presented.

Ushakov, Andriy↗

Polarized positrons at Ce\(^+\)BAF

A baseline concept for a continuous wave (CW) polarized positron injector was developed for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab [1]. This concept is based on positron beam generation by a high current polarized electron beam (1 mA, 120 MeV, >85% polarization) irradiating a 4 mm thick rotating water-cooled tungsten target or liquid metal target. The update on the development of the Ce+BAF injector concept including the polarized electron source, the development of high power targets, simulations of positron capture, the design of the transport line from the positron injector to the CEBAF North Linac and the planned experiment to measure the upper limits of transverse and longitudinal emittances accepted by the 12 GeV CEBAF optics are presented. [1] J. Grames et al., "Positron beams at Ce+BAF", in Proc. 14th Int. Particle Accelerator Conf. (IPAC’23), Venice, Italy, MOPL152, pp. 896–899 (2023). doi:10.18429/JACoW-IPAC2023-MOPL152

Ushakov, Andriy↗

A search for solar flare positrons

The detection of solar gamma-ray line emission and observations of the isotopes H2, H-3, and He-3 in solar cosmic rays provide direct evidence for the occurrence of high energy nuclear reactions in solar flare events. Appreciable numbers of other reaction products, including positrons with energies near about 1 MeV, should also be produced in such events. We have searched for positrons in the 0.16-1.6 MeV energy interval during 5 H-3 rich solar particle events. Based on calculations of positron and He-3 production at the sun, and using a simplified model of interplanetary propagation, we might expect comparable fluences of positrons and He-3 to be observed. Summing over these 5 events, we find the 0.16 to 1.6 MeV positron fluence to be a maximum of about 10% of the He-3 fluence with more tnan 1 MeV/nuc. This suggests that other processes, such as preferential trapping by the solar magnetic field, may be important.

Mewaldt, R. A.↗

Positron annihilation studies of moisture in graphite-reinforced composites

The positron lifetime technique of monitoring absorbed moisture is applied to several composites, including graphite/polymides which are candidates for high-temperature (over 260 C) applications. The experimental setup is a conventional fast-slow coincidence system wherein the positron lifetime is measured with respect to a reference time determined by the detection of a nuclear gamma ray emitted simultaneously with the positron. From the experiments, a rate of change of positron mean lifetime per unit mass of water can be determined for each type of specimen. Positron lifetime spectra are presented for a graphite/polyimide composite and for a pure polyimide.

Singh, J. J.↗

Positron annihilation spectroscopy with magnetically analyzed beams

Lifetime measurements with magnetically analyzed positron beams were made in condensed media with uniform and non-uniform properties. As expected, the lifetime values with magnetically analyzed positron beams in uniform targets are similar to those obtained with conventional positron sources. The lifetime values with magnetically analyzed beams in targets which have non-uniform properties vary with positron energy and are different from the conventional positron source derived lifetime values in these targets.

Singh, J. J.↗

Possible detection of flare-generated positrons by Helios 1 on 3 Jun 1982

The production of neutrons and gamma-ray lines by solar particles in the photosphere has been studied. The principal positron emiters which lead to the 0.51 MeV gamma-line are C-11 0-14, 0-15, N-13, Ne-19. The energies of the positrons form radioactive nuclei are of the order of few hundred keV. Positrons resulting from the pi(+) decay have energies of approx 10-100 MeV and cannot be measured by the MPAe-detector. Most of the positrons annihilate in the photosphere. A fraction however should be able to escape into the interplanetary space. Proton, electron and , for the first time, positron measurements (E = 152-546 keV) obtained by the MPAe-particle detector on board of Helios 1 are presented.

Kirsch, E.↗

Cosmic-ray positrons from 10 to 20 GeV - A balloon-borne measurement using the geomagnetic east-west asymmetry

Results are reported for cosmic-ray positrons obtained in a balloon flight of the University of Chicago electron telescope in Hawaii in April 1984. Making use of the east-west asymmetry in the geomagnetic cutoff rigidity, cosmic-ray positrons and negatrons were separated over the range 10-20 GeV. The resulting positron to electron ratio is 12-22 percent, significantly higher than the ratio measured in the 1-10 Gev range by other experiments. This increase appears to suggest that either a primary component of positrons becomes significant above 10 GeV or that the spectrum of primary negatrons decreases above 10 GeV more sharply than that of secondary positrons.

Mueller, Dietrich↗