Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Organic LED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electroluminescence and Plasmon-Assisted Directional Photoluminescence from 2D HgTe Nanoplatelets

In the visible range, 2D nanoplatelets (NPLs) have brought significant benefits compared to their 0D counterpart with an inherently anisotropic emission, a narrower photoluminescence (PL) signal, and new degrees of freedom to design heterostructures. Compared to the properties of cadmium chalcogenide NPLs in the visible, similar research is still mostly lacking in the infrared, in spite of existing synthetic paths to obtain narrow band gap semiconductors in 2D colloidal form. Here, in this paper, we focus on 2D HgTe NPLs and show how their PL can be stabilized through the proper choice of surface chemistry. We then demonstrate two important steps toward bright infrared light emitting diodes (LEDs) which are (i) the coupling to a plasmonic grating to control the magnitude and spatial direction of the PL signal and (ii) the observation of electroluminescence at 1300 nm, which is near telecom wavelength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Materials and Designs for High-Efficacy LED Light Engines

Cree, Inc. conducted a narrow-band downconverter (NBD) materials development and implementation program which will lead to warm-white LED light engines with enhanced efficacy via improved spectral efficiency with respect to the human eye response. New red (600-630nm) NBD materials could result in as much as a 20% improvement in warm-white efficacy at high color quality relative to conventional phosphor-based light sources. Key program innovations included: high quantum yield; narrow peak width; minimized component-level losses due to “cross-talk” and light scattering among red and yellow-green downconverters; and improved reliability to reach parity with conventional phosphors. NBD-enabled downconversion efficiency gains relative to conventional phosphors yielded an end-of-project LED light engine efficacy of >160 lm/W at room temperature and 35 A/cm2, with a correlated color temperature (CCT) of ~3500K and >90 CRI (Color Rending Index). NBD-LED light engines exhibited equivalent luminous flux and color point maintenance at >1,000 hrs. of highly accelerated reliability testing as conventional phosphor LEDs. A demonstration luminaire utilizing an NBD-based LED light engine had a steady-state system efficacy of >150 lm/W at ~3500K and >90 CRI, which exceeded the 2014 DOE R&D Plan luminaire milestone for FY17 of >150 lm/W at just 80 CRI.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1994

Guidelines for lighting of plants in controlled environments

These guidelines for lighting of plants, established by the organizing committee, provided a focus for the discussions at the workshop. The guidelines served as a basis for discussion amongst the workshop attendees and led to a number of recommendations that were recorded by the session chairpersons. The organizing committee indicated they would incorporate the recommendations and suggestions into a revised set of guidelines for additional discussion. It was understood that these guidelines will not be standards and will require upgrading and modifications as lamps and equipment become available and as new insights are obtained on plants' response to light. Revised draft guidelines are included as Tables 1 and 2 that have been developed by the organizing committee following the suggestions obtained at the workshop. The guidelines for growth chambers are in Table 1 and guideines for greenhouses are given in Table 2. These have been distributed to the participants who indicated a willingness to review proposals that were developed. It is hoped that these proposals will lead to the development of guidelines that will have general acceptance by plant scientists.

Dietzer, Gerald↗
DOE OSTI2021

Observation of ordered organic capping ligands on semiconducting quantum dots via powder X-ray diffraction

Abstract Powder X-ray diffraction is one of the key techniques used to characterize the inorganic structure of colloidal nanocrystals. The comparatively low scattering factor of nuclei of the organic capping ligands and their propensity to be disordered has led investigators to typically consider them effectively invisible to this technique. In this report, we demonstrate that a commonly observed powder X-ray diffraction peak around $$q=1.4{\AA}^{-1}$$ q = 1.4 Å − 1 observed in many small, colloidal quantum dots can be assigned to well-ordered aliphatic ligands bound to and capping the nanocrystals. This conclusion differs from a variety of explanations ascribed by previous sources, the majority of which propose an excess of organic material. Additionally, we demonstrate that the observed ligand peak is a sensitive probe of ligand shell ordering. Changes as a function of ligand length, geometry, and temperature can all be readily observed by X-ray diffraction and manipulated to achieve desired outcomes for the final colloidal system.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Center for Energy Efficient Materials (CEEM) (Final Technical Report)

The mission of the Center for Energy Efficient Materials (CEEM) was to serve the Department of Energy and the nation as a center of excellence dedicated to advancing basic research in nano-structured materials and devices for applications to solar electricity, thermoelectric conversion of waste heat to electricity, and solidstate lighting. The foundation of CEEM was based on the unique capabilities of UCSB and its partner institutions to control, synthesize, characterize, model, and apply materials at the nanoscale for more efficient sustainable energy resources. This unique expertise was a key source of the synergy that unified the research of the Center. Although the Center’s focus was basic research, It’s longer-term objective has been to transfer new materials and devices into the commercial sector where they will have a substantial impact on the nation’s need for efficient sustainable energy resources. As one measure of the impact of the Center, two start-up companies were formed based on its research. In addition, Center participants published a total of 210 archival journal articles, of which 51 were exclusively sponsored by the DOE grant. The work of the Center was structured around four specific tasks: Organic Solar Cells, Solid-State Lighting, Thermoelectrics, and High Efficiency Multi-junction Photovoltaic devices. A brief summary of each follows – detailed descriptions are in Sections 4 & 5 of this report. Research supported through CEEM led to an important shift with respect to the choice of materials used for the fabrication of solution deposited organic solar cells. Solution deposition opens the opportunity to manufacture solar cells via economically-viable high throughput tools, such as roll to roll printing. Prior to CEEM, most organic semiconductors utilized for this purpose involved polymeric materials, which, although they can form thin films reliably, suffer from batch to batch variations due to the statistical nature of the chemical reactions that produce them. In response, the CEEM team developed well-defined molecular semiconductors that produce active layers with very high power conversion efficiencies, in other words they can convert a very high fraction of sunlight into useful electrical power. The fact that the semiconductor is formed from molecular species provides the basis for circumventing the unreliability of polymer counterparts and, as an additional bonus, allows one to attain much grater insight into the structure of the active layer. The latter is particularly important because efficient conversion is the result of a complex arrangement of two semiconductors that need to phase separate in a way akin to oil and water, but with domains that are described by nanoscale dimensions. CEEM was therefore able to provide deep insight into the influence of nanostructure, through the application of structural characterization tools and theoretical methods that describe how electrical charges migrate through the organic layer. Our research in light emitting diode (LED)-based solid state lighting (SSL) was directed at improving efficiency and reducing costs to enable the widespread deployment of economically-viable replacements for inefficient incandescent, halogen, and fluorescent-based lighting. Our specific focus was to advance the fundamental science and technology of light emitting diodes to both understand factors that limit efficiencies and to provide innovative and viable solutions to the current impediments. One of the main challenges we faced is the decrease in efficiency when LEDs are driven harder to increase light output---the so called “droop” effect. It requires large emitting surfaces to reach a desired optical output, and necessitates the use of costly heat sinks, both of which increase the cost. We successfully reduced droop by growing LED crystals having non-conventional orientations. As recognized by the award of the 2014 Nobel prize to the inventors of the nitride LEDs (one of whom was a member of CEEM), LEDs already have a large societal impact in both developed (leading to large energy savings) and developing countries (bringing light where there is no electrical grid). The improvements in efficiency sought after in the CEEM project are key to a further impact of solid state lighting by LEDs with a projected doubling in efficiency by year 2020. Direct generation of electricity from heat has enormous promise for beneficial use of waste heat. But practical power generation directly from heat requires understanding and development of new and improved materials that will be more efficient and rugged than today’s thermoelectric materials. To accomplish this goal CEEM has synthesized five distinct and promising new classes of thermoelectric materials: (a) nanoparticle arrays that are effective in maximizing electric power generation and reducing detrimental loss of heat; (b) nitride and (c) oxide thermal electric materials that are effective at high temperatures where much beneficial heat is available; (d) arrays of silicon nano-wires that integrate thermal electricity generation into silicon-based electronics and materials; and (e) chemically synthesized nanostructured compounds that are cost effective, earth abundant, and environmentally friendly. The further development of these thermoelectric sources of electricity could have revolutionary impact for society in the recovery of waste heat from sources such as power plants and automobile exhaust, where there could be significant associated energy saving. It could even, in the future, provide disruptive alternatives and replacements for today’s internal combustion engines and could enable improved all-electric propulsion by the heat from shipboard nuclear reactors. The High Efficiency Multi-junction Photovoltaics task was a UCSB/NREL collaboration which bonded sub-cells from two different compound semiconductors material systems to make high efficiency multijunction solar cells for concentrating photovoltaic applications thathave substantially higher efficiency than single substrate cells made of elemental semiconductors such as silicon. This task required the development of new cell bonding methods with excellent coupling of both photons and electrons between the sub-cells. To accomplish this, we developed (1) GaInN solar cells with enhanced performance by using quantum-well absorbers and front-surface optical texturing, (2) a hybrid "pillar-array" bond which uses an array of metal pillars for electrical coupling, and (3) a "hybrid moth-eye" optical coating which combines the benefits of nano-imprinted moth-eye coatings and traditional multilayer coatings. The technical effectiveness was assessed by measurement of the photovoltaic efficiency of solar cells made using these techniques; the ultrahigh efficiencies targeted by this work are of compelling economic value for concentrating photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2023

From ash to oxides: Recovery of rare-earth elements as a step towards valorization of coal fly ash waste

Coal fly ash (CFA) is both a valuable waste material and a potential source of environmental contamination. The inclusion of metals such as rare-earth elements offer a possible incentive towards waste valorization if the metals can be extracted and recovered in an economical manner. Rare-earth elements (REEs) have many technological applications and are critically important in the manufacture of electric vehicles, communication devices, and industrial magnets. However, the global supply of rare-earth elements has faced shortages and price shocks. Current methods for separating and isolating individual rare-earth elements use large amounts of energy and organic solvents, raising concerns over environmental impacts. These factors have led to the investigation of nontraditional sources and separation techniques for these elements. Here, we describe a column-based system that uses a newly developed ligand-associated organosilica sorbent to concentrate and separate rare-earth elements from fly ash leachate. The fly ash used in this study originally contained 0.024 wt% rare-earth elements and the final oxide powder after enrichment contained > 10 wt% rare-earth elements, which is a enrichment of > 400 times. This process requires no additional organic solvents after the sorbent media has been synthesized, offering an alternative to the current standard using solvent extraction for rare-earth element recovery.

42 ENGINEERING↗
DOE OSTI2016

Ionic Liquids Impact the Bioenergy Feedstock-Degrading Microbiome and Transcription of Enzymes Relevant to Polysaccharide Hydrolysis [plus supplementary information]

Pretreatment using ionic liquids (IL) is a promising approach for the conversion of lignocellulose to biofuels. Because IL can be inhibitory to enzymes and microorganisms involved in downstream hydrolysis and fermentation steps, discovery of IL-tolerant organisms and enzymes is critical for advancing this technology. Employing metatranscriptomics in the analysis of IL-enriched cultures facilitated tracking of dynamic changes in a complex microbial community at the level of gene transcription and doing so with genome resolution. Specific organisms were discovered that could simultaneously tolerate a moderate IL concentration and transcribe a diverse array of cellulolytic enzymes. Gene sequences of cellulolytic enzymes and efflux pumps from those same organisms were also identified, providing important resources for future research on engineering IL-tolerant organisms and enzymes. Ionic liquid (IL) pretreatment is a promising approach for the conversion of lignocellulose to biofuels. The toxicity of residual IL, however, negatively impacts the performance of industrial enzymes and microorganisms in hydrolysis and fermentation. In this study, a thermophilic microbial community was cultured on switchgrass amended with various levels of the ionic liquid 1-ethyl-3-methylimidazolium acetate. Changes in the microbial community composition and transcription of genes relevant to IL tolerance and lignocellulose hydrolysis were quantified. Increasing the level of IL to 0.1% (wt) led to increased levels of relative abundance and transcription in organisms of the phylum Firmicutes . Interestingly, IL concentrations of up to 1% (wt) also resulted in greater xylanase transcription and enzyme activity as well as increased transcription of endoglucanase, beta-glucosidase, and IL tolerance genes compared to communities without IL. IL levels above 1% (wt) resulted in decreased enzyme activity and transcription of genes involved in lignocellulose hydrolysis. The results indicate that moderate levels of IL select for thermophilic microorganisms that not only tolerate IL but also effectively hydrolyze lignocellulose from switchgrass. Discovery of IL-tolerant organisms and enzymes is critical for the development of biological processes that convert IL-pretreated biomass to biofuels and chemicals. Employing metatranscriptomic analysis of enrichment cultures can facilitate the discovery of microorganisms and enzymes that may be active in the presence of toxic compounds such as ionic liquids.

09 BIOMASS FUELS↗
DOE OSTI2012

Structure-composition-luminescence correlations in Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}Al{sub 1-y}In{sub y}O{sub 4}F (0.001{<=}x, y{<=}0.1) oxyfluorides

Luminescent materials composed of Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}Al{sub 1-y}In{sub y}O{sub 4}F (0.001{<=}x, y{<=}0.1) were prepared by the solid-state reaction method. After the replacement of Sr{sup 2+} and Al{sup 3+} ions by Sm{sup 3+} and In{sup 3+} ions in Sr{sub 2.5}Ba{sub 0.5}AlO{sub 4}F host structure, a novel charge-transfer band centered around 304 nm shifted from 240 nm is monitored; moreover, sharp and well-resolved emission peaks in the {sup 4}G{sub 5/2}{yields}{sup 6}H{sub J} transitions of the Sm{sup 3+} activator are observed. The diverse excitation and emission photoluminescence spectra of Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}Al{sub 1-y}In{sub y}O{sub 4}-{alpha}F1-{delta} (0.001{<=}x, y{<=}0.1) phosphors originated by the charge-transfer of the host to the Sm{sup 3+} activator, the f-f transitions in the Sm{sup 3+} ions, and the defect-induced self-activation are also introduced. - Graphical abstract: After the replacement of Sr{sup 2+} and Al{sup 3+} ions by Sm{sup 3+} and In{sup 3+} ions in Sr{sub 2.5}Ba{sub 0.5}AlO{sub 4}F host structure, a novel charge-transfer band centered around 304 nm shifted from 240 nm is monitored; moreover, sharp and well-resolved emission peaks in the {sup 4}G{sub 5/2}{yields}{sup 6}H{sub J} transitions of the Sm{sup 3+} activator are observed (Figure, Left). The diverse excitation and emission photoluminescence spectra of Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}Al{sub 1-y}In{sub y}O{sub 4}-{alpha}F1-{delta} (0.001{<=}x, y{<=}0.1) phosphors originated by the charge-transfer of the host to the Sm{sup 3+} activator, the f-f transitions in the Sm{sup 3+} ions, and the defect-induced self-activation are also introduced. Highlights: Black-Right-Pointing-Pointer Strong and well-resolved emitting peaks are monitored in Sm{sup 3+}-doped oxyfluoride phosphors. Black-Right-Pointing-Pointer Diverse excitation and emission spectra of the oxyfluoride phosphors originated from Sm{sup 3+} activator and the defect-induced self-activation were clearly monitored. Black-Right-Pointing-Pointer Oxyfluoride phosphors could be quite effective to prepare white-emitting light for (near)-UV LED applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Projections onto the Pareto surface in multicriteria radiation therapy optimization

Purpose: To eliminate or reduce the error to Pareto optimality that arises in Pareto surface navigation when the Pareto surface is approximated by a small number of plans. Methods: The authors propose to project the navigated plan onto the Pareto surface as a postprocessing step to the navigation. The projection attempts to find a Pareto optimal plan that is at least as good as or better than the initial navigated plan with respect to all objective functions. An augmented form of projection is also suggested where dose–volume histogram constraints are used to prevent that the projection causes a violation of some clinical goal. The projections were evaluated with respect to planning for intensity modulated radiation therapy delivered by step-and-shoot and sliding window and spot-scanned intensity modulated proton therapy. Retrospective plans were generated for a prostate and a head and neck case. Results: The projections led to improved dose conformity and better sparing of organs at risk (OARs) for all three delivery techniques and both patient cases. The mean dose to OARs decreased by 3.1 Gy on average for the unconstrained form of the projection and by 2.0 Gy on average when dose–volume histogram constraints were used. No consistent improvements in target homogeneity were observed. Conclusions: There are situations when Pareto navigation leaves room for improvement in OAR sparing and dose conformity, for example, if the approximation of the Pareto surface is coarse or the problem formulation has too permissive constraints. A projection onto the Pareto surface can identify an inaccurate Pareto surface representation and, if necessary, improve the quality of the navigated plan.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Preface - JES Focus Issue on Advances in Modern Polymer Electrolyte Fuel Cells in Honor of Shimshon Gottesfeld

The advances in polymer electrolyte fuel cell (PEFC) technologies over the past few decades and particularly over the past few years, have been very impressive. The promise of PEFC-based fuel cell electric vehicles (FCEVs) as long range EVs of zero emissions, high conversion efficiency, and fit for use of fuels from renewable sources, was recognized by pioneers of this technology some 40 years ago, facing at the time significant skepticism. The eventual commercial introduction of FCEVs in 2015 was enabled by the impressive accomplishments of scientists, engineers, and policymakers over that period of time. Among those responsible for the fuel cell community's success, few, if any, have had more impact than Dr. Shimshon Gottesfeld. He is a distinguished fuel cell educator, a passionate fuel cell and alternative fuel advocate, and a pioneering fuel cell innovator, responsible for several critical contributions that helped demonstrate the commercial viability of polymer electrolyte fuel cells. His impact on the field is seen through specific technical accomplishments, the scientists he has mentored, the teams he has led in different topical areas, and his activities as organizer and speaker in technical fuel cell meetings. We are honored to dedicate this focus issue of the Journal of The Electrochemical Society, entitled 'Advances in Modern Polymer Electrolyte Fuel Cells in Honor of Shimshon Gottesfeld,' to Dr. Gottesfeld for his accomplishments in the area of PEFC science and technology.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2016

From genomes to metabolomes: Understanding mechanisms of symbiosis and cell-cell signaling using the archaeal system Ignicoccus-Nanoarchaeum

The main objective of this project was to use symbiotic Nanoarchaeaota, a group of thermophilic Archaea that are obligate symbionts/parasites on other Archaea, to develop an integrated multi-omic approach to study inter-species interactions as well as to understand fundamental mechanism that enable such relationships. As part of this grant we have achieved a number of important milestone on both technical and scientific levels. On the technical side, we developed immunofluorescence labeling and tracking methods to follow Nanoarchaeota in cultures and in environmental samples, we applied such methods in conjunction with flow cytometry to quantify and isolate uncultured representatives from the environment and characterized them by single cell genomics. On the proteomics side, we developed a more efficient and sensitive method to recover and semi-quantitatively measure membrane proteins, while achieving high total cellular proteome coverage (70-80% of the predicted proteome). Metabolomic analyses used complementary NMR and LC/GC mass spectrometry and led to the identification of novel lipids in these organisms as well as quantification of some of the major metabolites. Importantly, using several informatics approaches we were also able to integrate the transcriptomic, proteomic and metabolomic datasets, revealing aspects of the interspecies interaction that were not evident in the single omic analyses (manuscript in review). On the science side we determined that N. equitans and I. hospitalis are metabolically coupled and that N. equitans is strictly dependent on its host both for metabolic precursors and energetic needs. The actual mechanism by which small molecules move across the cell membrane remains unknown. The Ignicoccus host responds to the metabolic and energetic burned by upregulating of key primary metabolism steps and ATP synthesis. The two species have co-evolved, aspect that we determined by comparative genomics with other species of Ignicoccus (manuscript in preparation) and by characterizing other similar Nanoarchaeota systems. Using a single cell genomics approach we characterized the first terrestrial geothermal Nanoarchaeota system, from Yellowstone National Park. That nanoarchaeon uses a different host, a species of Sulfolobales, and comparative genomics with N. equitans-Ignicoccus allowed us to come up with an evolutionary model for the evolution of this group of organisms across marine and terrestrial ecosystems. Based on metabolic inferences we were also able to isolate in culture the first such terrestrial nanoarchaeal system, also from Yellowstone, which involves a species of Acidilobus. The novel nanoarchaeal system was characterized using proteomics and it helped us better understand the metabolic capabilities of these organisms as well as how co-evolution shapes the genomes of interacting species. It was also one of the very few cases in which prior genomic data was used to successfully design an approach to culture an organism, which remains the gold standard in microbiology research. As a better understanding of interspecies interaction requires multiple model systems, we have pursued identification and genomic characterization or isolation of additional nanoarchaeal systems from geographically and geochemically distinct environments. Two additional nanoarchaeal systems are presently being characterized from hot springs in Yellowstone and Iceland and will be the subject to future publications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Large Bench-Scale Development of a Non-Aqueous Solvent (NAS) CO 2 Capture Process for Coal-Fired Power Plants Utilizing Real Coal-Derived Flue Gas (Final Report)

This advanced non-aqueous solvent (NAS) technology led by RTI International in collaboration with Norwegian research organization SINTEF and industry partner Linde LLC, represents a disruptive advance in carbon capture to meet the Department of Energy’s critical mission to lower the cost associated with reducing carbon emissions from existing coal-fired power plants. This technology may reduce the energy required to remove carbon dioxide from flue gas by approximately 50%, decreasing the cost of carbon capture by 35% compared to earlier technologies. This report shows the results from testing at SINTEFs demonstration facility in Tiller, Norway.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2026

Rockies / Plains Energy Accelerator for Commercializing Hardtech (REACH)

This document is the final report for the Rockies/Plains Energy Accelerator for Commercializing Hard-Tech (REACH), a U.S. Department of Energy (USDOE)-funded energy hard tech accelerator jointly led by Colorado State University and Innosphere Ventures. Both organizations are located in Fort Collins, CO.

08 HYDROGEN↗
NASA NTRS1993

Technology for national asset storage systems

An industry-led collaborative project, called the National Storage Laboratory, was organized to investigate technology for storage systems that will be the future repositories for our national information assets. Industry participants are IBM Federal Systems Company, Ampex Recording Systems Corporation, General Atomics DISCOS Division, IBM ADSTAR, Maximum Strategy Corporation, Network Systems Corporation, and Zitel Corporation. Industry members of the collaborative project are funding their own participation. Lawrence Livermore National Laboratory through its National Energy Research Supercomputer Center (NERSC) will participate in the project as the operational site and the provider of applications. The expected result is an evaluation of a high performance storage architecture assembled from commercially available hardware and software, with some software enhancements to meet the project's goals. It is anticipated that the integrated testbed system will represent a significant advance in the technology for distributed storage systems capable of handling gigabyte class files at gigabit-per-second data rates. The National Storage Laboratory was officially launched on 27 May 1992.

Coyne, Robert A.↗
NASA NTRS1999

Life: past, present and future

Molecular methods of taxonomy and phylogeny have changed the way in which life on earth is viewed; they have allowed us to transition from a eukaryote-centric (five-kingdoms) view of the planet to one that is peculiarly prokarote-centric, containing three kingdoms, two of which are prokaryotic unicells. These prokaryotes are distinguished from their eukaryotic counterparts by their toughness, tenacity and metabolic diversity. Realization of these features has, in many ways, changed the way we feel about life on earth, about the nature of life past and about the possibility of finding life elsewhere. In essence, the limits of life on this planet have expanded to such a degree that our thoughts of both past and future life have been altered. The abilities of prokaryotes to withstand many extreme conditions has led to the term extremophiles, used to describe the organisms that thrive under conditions thought just a few years ago, to be inconsistent with life. Perhaps the most extensive adaptation to extreme conditions, however, is represented by the ability of many bacteria to survive nutrient conditions not compatible with eukaryotic life. Prokaryotes have evolved to use nearly every redox couple that is in abundance on earth, filling the metabolic niches left behind by the oxygen-using, carbon-eating eukaryotes. This metabolic plasticity leads to a common feature in physically stratified environments of layered microbial communities, chemical indicators of the metabolic diversity of the prokaryotes. Such 'metabolic extremophily' forms a backdrop by which we can view the energy flow of life on this planet, think about what the evolutionary past of the planet might have been, and plan ways to look for life elsewhere, using the knowledge of energy flow on earth.

NASA Discipline Developmental Biology↗
NASA NTRSDate not supplied

Exploring our Changing Planet through NASA’s Earth Information Center and Novel Methods for Earth Science Communication

In June 2023, NASA unveiled the Earth Information Center (EIC), an interagency initiative which invites the global community to explore how our planet is changing through interactive installations, captivating visualizations, and novel storytelling. Existing in both physical and virtual space, the EIC serves as a gateway to actionable information collected through an expanding fleet of Earth observing satellites and sensors. The EIC features data driven visualizations, near real-time information, immersive experiences, and curated stories that highlight the applications of publicly available data to address environmental challenges across nine thematic areas: agriculture, biodiversity, disasters, greenhouse gases, air quality, sea level rise, sustainable energy, water resources, and wildfires. Designed by an interdisciplinary team, EIC exhibits are developed to reach a wide base of end-users across multiple learning modalities. During the first year of operation, the inaugural location of the EIC at NASA Headquarters in Washington, DC, welcomed an estimated 24,000 visitors, hosted over 145 tours for domestic and international organizations, supported NASA’s Earth Day 2024 programming, and led six STEM programs for diverse student communities. With lessons learned from the first year of being open to the public and a variety of novel science communication tools in development, the EIC is expanding the mission’s reach by collaborating with museums and visitor centers. Through these collaborations, we aim to inform a broader demographic about the unprecedented changes observed in Earth’s climate and inspire communities to learn more about their one and only home, planet Earth.

Nicole Ramberg-Pihl↗
NASA NTRS2016

First Detection of Non-Chlorinated Organic Molecules Indigenous to a Martian Sample

The Sample Analysis at Mars (SAM) instrument onboard Curiosity can perform pyrolysis of martian solid samples, and analyze the volatiles by direct mass spectrometry in evolved gas analysis (EGA) mode, or separate the components in the GCMS mode (coupling the gas chromatograph and the mass spectrometer instruments). In addition, SAM has a wet chemistry laboratory designed for the extraction and identification of complex and refractory organic molecules in the solid samples. The chemical derivatization agent used, N-methyl-N-tert-butyldimethylsilyl- trifluoroacetamide (MTBSTFA), was sealed inside seven Inconel metal cups present in SAM. Although none of these foil-capped derivatization cups have been punctured on Mars for a full wet chemistry experiment, an MTBSTFA leak was detected and the resultant MTBSTFA vapor inside the instrument has been used for a multi-sol MTBSTFA derivatization (MD) procedure instead of direct exposure to MTBSTFA liquid by dropping a solid sample directly into a punctured wet chemistry cup. Pyr-EGA, Pyr-GCMS and Der-GCMS experiments each led to the detection and identification of a variety of organic molecules in diverse formations of Gale Crater.

Freissinet, C.↗
DOE OSTI2018

Enhanced Out-of-Plane Conductivity and Photovoltaic Performance in n = 1 Layered Perovskites through Organic Cation Design

Layered perovskites with the formula (R–NH 3 ) 2 PbI 4 have excellent environmental stability but poor photovoltaic function due to the preferential orientation of the semiconducting layer parallel to the substrate and the typically insulating nature of the R–NH 3 + cation. Here, we report a series of these n = 1 layered perovskites with the form (aromatic-O-linker-NH 3 ) 2 PbI 4 where the aromatic moiety is naphthalene, pyrene, or perylene and the linker is ethyl, propyl, or butyl. These materials achieve enhanced conductivity perpendicular to the inorganic layers due to better energy level matching between the inorganic layers and organic galleries. The enhanced conductivity and visible absorption of these materials led to a champion power conversion efficiency of 1.38%, which is the highest value reported for any n = 1 layered perovskite, and it is an order of magnitude higher efficiency than any other n = 1 layered perovskite oriented with layers parallel to the substrate. Furthermore, these findings demonstrate the importance of leveraging the electronic character of the organic cation to improve optoelectronic properties and thus the photovoltaic performance of these chemically stable low n layered perovskites.

36 MATERIALS SCIENCE↗