Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ordering transformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Examination of time series through randomly broken windows

In order to determine the Fourier transform of a quasi-periodic time series (linear problem), or the power spectrum of a stationary random time series (quadratic problem), data should be recorded without interruption over a long time interval. The effect of regular interruption such as the day/night cycle is well known. The effect of irregular interruption of data collection (the "breaking" of the window function) with the simplifying assumption that there is a uniform probability p that each interval of length tau, of the total interval of length T = N sub tau, yields no data, is investigated. For the linear case it is found that the noise-to-signal ratio will have a (one-sigma) value less than epsilon if N exceeds p(-1)(1-p)epsilon(-2). For the quadratic case, the same requirement is met by the less restrictive requirement that N exceed p(-1)(1-p)epsilon(-1).

Sturrock, P. A.↗
NASA NTRS1983

Adaptive control of a flexible beam using least square lattice filters

This paper presents an indirect adaptive control scheme for the control of flexible structures using recursive least square lattice filters. The identification scheme uses lattice filters which provide an on-line estimate of the number of modes, mode shapes and modal amplitudes. These modes are coupled and a transformation to decouple them in order to obtain the natural modes is presented. The decoupled modal amplitude time series are then used in an equation error identification scheme to identify the model parameters in an autoregressive moving average (ARMA) form. The control is based on modal pole placement scheme with the objective of vibration suppression. The control gains are calculated based on the identified ARMA parameters. Before using the identified parameters for control, detailed testing and validation procedures are carried out on the identified parameters. The full adaptive control scheme is demonstrated using the simulation for the 12 foot free-free beam apparatus at NASA Langley Research Center.

Sundararajan, N.↗
NASA NTRS1988

Run-time parallelization and scheduling of loops

The class of problems that can be effectively compiled by parallelizing compilers is discussed. This is accomplished with the doconsider construct which would allow these compilers to parallelize many problems in which substantial loop-level parallelism is available but cannot be detected by standard compile-time analysis. We describe and experimentally analyze mechanisms used to parallelize the work required for these types of loops. In each of these methods, a new loop structure is produced by modifying the loop to be parallelized. We also present the rules by which these loop transformations may be automated in order that they be included in language compilers. The main application area of the research involves problems in scientific computations and engineering. The workload used in our experiment includes a mixture of real problems as well as synthetically generated inputs. From our extensive tests on the Encore Multimax/320, we have reached the conclusion that for the types of workloads we have investigated, self-execution almost always performs better than pre-scheduling. Further, the improvement in performance that accrues as a result of global topological sorting of indices as opposed to the less expensive local sorting, is not very significant in the case of self-execution.

Saltz, Joel H.↗
NASA NTRS1992

The effects of video compression on acceptability of images for monitoring life sciences experiments

Future manned space operations for Space Station Freedom will call for a variety of carefully planned multimedia digital communications, including full-frame-rate color video, to support remote operations of scientific experiments. This paper presents the results of an investigation to determine if video compression is a viable solution to transmission bandwidth constraints. It reports on the impact of different levels of compression and associated calculational parameters on image acceptability to investigators in life-sciences research at ARC. Three nonhuman life-sciences disciplines (plant, rodent, and primate biology) were selected for this study. A total of 33 subjects viewed experimental scenes in their own scientific disciplines. Ten plant scientists viewed still images of wheat stalks at various stages of growth. Each image was compressed to four different compression levels using the Joint Photographic Expert Group (JPEG) standard algorithm, and the images were presented in random order. Twelve and eleven staffmembers viewed 30-sec videotaped segments showing small rodents and a small primate, respectively. Each segment was repeated at four different compression levels in random order using an inverse cosine transform (ICT) algorithm. Each viewer made a series of subjective image-quality ratings. There was a significant difference in image ratings according to the type of scene viewed within disciplines; thus, ratings were scene dependent. Image (still and motion) acceptability does, in fact, vary according to compression level. The JPEG still-image-compression levels, even with the large range of 5:1 to 120:1 in this study, yielded equally high levels of acceptability. In contrast, the ICT algorithm for motion compression yielded a sharp decline in acceptability below 768 kb/sec. Therefore, if video compression is to be used as a solution for overcoming transmission bandwidth constraints, the effective management of the ratio and compression parameters according to scientific discipline and experiment type is critical to the success of remote experiments.

Haines, Richard F.↗
NASA NTRS1997

The Topology of Symmetric Tensor Fields

Combinatorial topology, also known as "rubber sheet geometry", has extensive applications in geometry and analysis, many of which result from connections with the theory of differential equations. A link between topology and differential equations is vector fields. Recent developments in scientific visualization have shown that vector fields also play an important role in the analysis of second-order tensor fields. A second-order tensor field can be transformed into its eigensystem, namely, eigenvalues and their associated eigenvectors without loss of information content. Eigenvectors behave in a similar fashion to ordinary vectors with even simpler topological structures due to their sign indeterminacy. Incorporating information about eigenvectors and eigenvalues in a display technique known as hyperstreamlines reveals the structure of a tensor field. The simplify and often complex tensor field and to capture its important features, the tensor is decomposed into an isotopic tensor and a deviator. A tensor field and its deviator share the same set of eigenvectors, and therefore they have a similar topological structure. A a deviator determines the properties of a tensor field, while the isotopic part provides a uniform bias. Degenerate points are basic constituents of tensor fields. In 2-D tensor fields, there are only two types of degenerate points; while in 3-D, the degenerate points can be characterized in a Q'-R' plane. Compressible and incompressible flows share similar topological feature due to the similarity of their deviators. In the case of the deformation tensor, the singularities of its deviator represent the area of vortex core in the field. In turbulent flows, the similarities and differences of the topology of the deformation and the Reynolds stress tensors reveal that the basic addie-viscosity assuptions have their validity in turbulence modeling under certain conditions.

Levin, Yingmei↗
NASA NTRS2005

Gases and Aerosols over North America and the Atlantic: First results from INTEX-A

Intercontinental Chemical Transport Experiment (INTEX; http://cloud1.arc.nasa.gov) is an ongoing two-phase integrated atmospheric field experiment being performed over North America (NA). Its first phase (INTEX-A) was performed in the summer of 2004 and the second phase (INTEX-B) is planned for the early spring of 2006. The main goal is to characterize the sources and distribution of gases and aerosols over NA and to understand their transport and transformation on transcontinental/intercontinental scales in order to assess their impact on air quality and climate. Central to achieving this goal is the need to relate space-based observations with those from airborne and surface platforms. During JNTEX-A, NASA s DC-8 was joined by some dozen other aircraft from a large number of European (U. K., France, and Germany) and North American partners to explore the composition of the troposphere over NA and the Atlantic in a coordinated manner. Global and regional models along with satellite observations were extensively used to plan, coordinate, and implement this field mission. Aircraft were instrumented to measure a comprehensive suite of gases and aerosols utilizing in-situ and remote sensors. The NASA DC-8 alone was equipped with some 20 instruments capable of measuring species at concentrations as low as 10(exp -15) v/v. Measurements included major atmospheric gaseous constituents (O3, NO(x), HNO3, HNO4, PANS, SO2, VOC/OVOC, CO, and CO2), free radicals and precursors (OH, HO2, H2O2, HCHO), aerosols and radiation (microphysics, composition, optical depth, radiative flux), as well as multiple tracers of pollution. Validation of instruments aboard Terra, Aqua, and Envisat satellites was given high priority. Some of the highest pollution levels were present in the upper troposphere due to widespread deep convection. Although unexpected, frequent instances of Asian pollution over NA were encountered during these summer months. The soil uptake of CO2 over NA was characterized over large regions of NA helping to understand the continents CO2-sink potential. DC-8 sampling of smoke from Alaskan fires and formaldehyde over forested regions, and simultaneous satellite observations of these provided excellent opportunities for the interplay of these platforms. Outflow of pollution from NA was sampled again over the Atlantic after several days to assess its evolution during transport. Models of chemistry and radiation are presently being employed to help in the interpretation of JNTEX-A data. The planning for INTEX-B (spring 2006) is currently underway. First results from INTEX-A and plans for INTEX-B will be discussed

Singh, Hanwant B.↗
NASA NTRS2012

Water in Pyroxene and Olivine from Martian Meteorites

Water in the interior of terrestrial planets can be dissolved in fluids or melts and hydrous phases, but can also be locked as protons attached to structural oxygen in lattice defects in nominally anhydrous minerals (NAM) like olivine, pyroxene, or feldspar [1-3]. Although these minerals contain only tens to hundreds of ppm H2O, this water can amount to at least one ocean in mass when added at planetary scales because of the modal dominance of NAM in the mantle and crust [4]. Moreover these trace amounts of water can have drastic effects on melting temperature, rheology, electrical and heat conductivity, and seismic wave attenuation [5]. There is presently a debate on how much water is present in the martian mantle. Secondary ionization mass spectrometry (SIMS) studies of NAM [6], amphiboles and glass in melt inclusions [7-10], and apatites [11, 12] from Martian meteorites report finding as much water as in the same phases from Earth's igneous rocks. Most martian hydrous minerals, however, generally have the relevant sites filled with Cl and F instead of H [13, 14], and experiments using Cl [15] in parent melts can reproduce Martian basalt compositions as well as those with water [16]. We are in the process of analyzing Martian meteorite minerals by Fourier transform infrared spectrometry (FTIR) in order to constrain the role of water in this planet s formation and magmatic evolution

Peslier, A. H.↗
NASA NTRS2017

Economical Unsteady High-Fidelity Aerodynamics for Structural Optimization with a Flutter Constraint

Structural optimization with a flutter constraint for a vehicle designed to fly in the transonic regime is a particularly difficult task. In this speed range, the flutter boundary is very sensitive to aerodynamic nonlinearities, typically requiring high-fidelity Navier-Stokes simulations. However, the repeated application of unsteady computational fluid dynamics to guide an aeroelastic optimization process is very computationally expensive. This expense has motivated the development of methods that incorporate aspects of the aerodynamic nonlinearity, classical tools of flutter analysis, and more recent methods of optimization. While it is possible to use doublet lattice method aerodynamics, this paper focuses on the use of an unsteady high-fidelity aerodynamic reduced order model combined with successive transformations that allows for an economical way of utilizing high-fidelity aerodynamics in the optimization process. This approach is applied to the common research model wing structural design. As might be expected, the high-fidelity aerodynamics produces a heavier wing than that optimized with doublet lattice aerodynamics. It is found that the optimized lower skin of the wing using high-fidelity aerodynamics differs significantly from that using doublet lattice aerodynamics.

Bartels, Robert E.↗
NASA NTRS2023

Unifying Radiative Transfer Models in Computer Graphics and Remote Sensing, Part II: A Differentiable, Polarimetric Forward Model and Validation

The constellation of Earth-observing satellites continuously collects measurements of scattered radiance, which must be transformed into geophysical parameters in order to answer fundamental scientific questions about the Earth. Retrieval of these parameters requires highly flexible, accurate, and fast forward and inverse radiative transfer models. Existing forward models used by the remote sensing community are typically accurate and fast, but sacrifice flexibility by assuming the atmosphere or ocean is composed of plane-parallel layers. Monte Carlo forward models can handle more complex scenarios such as 3D spatial heterogeneity, but are relatively slower. We propose looking to the computer graphics community for inspiration to improve the statistical efficiency of Monte Carlo forward models and explore new approaches to inverse models for remote sensing. In Part 2 of this work, we demonstrate that Monte Carlo forward models in computer graphics are capable of sufficient accuracy for remote sensing by extending Mitsuba 3, a forward and inverse modeling framework recently developed in the computer graphics community, to simulate simple atmosphere-ocean systems and show that our framework is capable of achieving error on par with codes currently used by the remote sensing community on benchmark results.

Radiative transfer↗
NASA NTRS2023

Unifying radiative transfer models in computer graphics and remote sensing, Part I: A Survey

The constellation of Earth-observing satellites continuously collects measurements of scattered radiance, which must be transformed into geophysical parameters in order to answer fundamental scientific questions about the Earth. Retrieval of these parameters requires highly flexible, accurate, and fast forward and inverse radiative transfer models. Existing forward models used by the remote sensing community are typically accurate and fast, but sacrifice flexibility by assuming the atmosphere or ocean is composed of plane-parallel layers. Monte Carlo forward models can handle more complex scenarios such as 3D spatial heterogeneity, but are relatively slower. We propose looking to the computer graphics community for inspiration to improve the statistical efficiency of Monte Carlo forward models and explore new approaches to inverse models for remote sensing. In Part 1 of this work, we examine the evolution of radiative transfer models in computer graphics and highlight recent advancements that have the potential to push forward models in remote sensing beyond their current periphery of realism.

Radiative transfer↗
DOE OSTI2022

Chemical Tuning Meets 2D Molecular Magnets

Two-dimensional (2D) magnets provoke a surge of interest in large anisotropy in reduced dimensions and are promising for next-generation information technology where dynamic magnetic tuning is essential. Until recently, the crucial metal-organic magnet Cr(pyz) 2 ∙xLiCl∙yTHF with considerable high coercivity and high-temperature magnetic order opens up a new platform to control magnetism in metal-organic materials at room temperature. Here we report an in-situ chemical tuning route to realize the controllable transformation of low-temperature magnetic order into room-temperature hard magnetism in Cr(pyz) 2 ∙xLiCl∙yTHF. The chemical tuning via electrochemical lithiation and solvation/desolvation exhibits continuously variable magnetic features from cryogenic magnetism to the room-temperature optimum performance of coercivity (H c ) of 8500 Oe and energy product of 0.6 MGOe. Such chemically flexible tunability of room-temperature magnetism is ascribed to the different degrees of lithiation and solvation that modify the stoichiometry and Cr-pyrazine coordination framework. Furthermore, the additively manufactured hybrid magnets show air stability and electromagnetic induction, providing potential applications. Our findings here suggest chemical tuning as a universal approach to control the anisotropy and magnetism of 2D hybrid magnets at room temperature, promising for data storage, magnetic refrigeration, and spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxidation of 3D-printed SiC in air and steam environments

Here, the high-temperature oxidation of additively manufactured and chemically vapor infiltrated (3D-printed SiC) has been compared to chemical vapor deposited (CVD) SiC. 100-h isothermal exposures were conducted at 1425° and 1300°C at 1 atm under both dry air and steam environments. A SiC reaction tube was utilized to reduce silica volatility. After steam oxidation at 1425° and 1300°C, on the 3D-printed SiC surface, which was intrinsically rougher than the CVD surface, scales were 70%–90% thicker at the convex regions compared to concave/flat regions. In the convex regions, large cracks perpendicular to the oxidizing interface were observed. After dry air oxidation, scale thicknesses were comparable between 3D-printed SiC and CVD SiC, regardless of geometry. Finite element modeling, conducted to elucidate the relationship between SiC geometry and ß- to α-cristobalite transformation stress, determined cristobalite transformation tensile stresses to be on the order of 103 MPa during cool down, assuming a 6 vol% reduction. Compared to flat SiC substrates, tensile transformation stresses were elevated at concave regions and relaxed at convex regions. Combined with specimen mass gain (accounting for the rougher surface) of 3D-printed SiC being 15%–32% higher for 3D-printed SiC after 1300°C and 1425°C steam oxidation, the work presented concludes that the increased oxidation of 3D-printed SiC is primarily caused by tensile hoop stresses driven by oxidation volume expansion. Lastly, the efficacy of the 3D-printing method is demonstrated through the production of tristructural isotropic imbedded 3D-printed SiC fuel forms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Local ordering in disordered Nd x Zr 1-x O 2-0.5x pyrochlore as observed using neutron total scattering

Pyrochlore complex oxides (A 2 B 2 O 7 ) are an important class of fluorite-derivative ceramics with exceptional chemical and structural versatility which make them ideal model systems for studying disordering mechanisms over a range of spatial scales. Here, neutron total scattering methods were used to analyze the structural behavior in the non-stoichiometric series Nd x Zr 1-x O 2-0.5x (0.5 ≤ x ≤ 0.23) as a function of Nd content, x. Characterization of the structure functions using Rietveld refinement and the pair distribution functions with small-box refinement reveal complex disordering pathways; the average, long-range phase changes over a very narrow compositional range from pyrochlore ($Fd\bar{3}m$) to defect fluorite ($Fm\bar{3}m$) through full randomization of the cation and anion sublattices at x ~ 0.31, while the local, short-range structure continuously adopts a weberite-type atomic arrangement (C222 1 ). Comparison to a previously studied Ho 2 Ti 2-x Zr x O 7 solid solution series reveals how changes in chemical composition and stoichiometry modify defect formation and determine how disordering progresses across different length scales in pyrochlore oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeling phase transformations in Mn-rich disordered rocksalt cathodes with machine-learning interatomic potentials

Mn-rich disordered rocksalt (DRX) cathode materials exhibit a phase transformation from a disordered to a partially disordered spinel-like structure (δ-phase) during electrochemical cycling. Here, in this computational study, we use charge-informed molecular dynamics with a fine-tuned CHGNet foundation potential to investigate the phase transformation in LixMn 0.8 Ti 0.1 O 1.9 F 0.1 . Our results indicate that transition metal migration occurs and reorders to form the spinel-like ordering in an FCC anion framework. The transformed structure contains a higher concentration of nontransition metal (0-TM) face-sharing channels, which are known to improve Li transport kinetics. Analysis of the Mn valence distribution suggests that the appearance of tetrahedral Mn 2+ is a consequence of spinel-like ordering, rather than the trigger for cation migration as previously suggested. Calculated equilibrium intercalation voltage profiles demonstrate that the δ-phase, unlike the ordered spinel, exhibits solid-solution signatures at low voltage. A higher Li capacity is obtained than in the DRX phase. This study provides atomic insights into solid-state phase transformation and its relation to experimental electrochemistry, highlighting the potential of machine-learning interatomic potentials for understanding complex oxide materials.

Zhong, Peichen [University of California, Berkeley↗
NASA NTRS1991

North American plate dynamics

Deformation within the North American plate in response to various tectonic processes is modeled using an elastic finite element analysis. The tectonic processes considered in the modeling include ridge forces associated with the normal thermal evolution of oceanic lithosphere, shear and normal stresses transmitted across transforms, normal stresses transmitted across convergent boundaries, stresses due to horizontal density contrasts within the continent, and shear tractions applied along the base of the plate. Model stresses are calculated with respect to a lithostatic reference stress state. Shear stresses transmitted across transform boundaries along the San Andreas and Caribbean are small, of the order of 5-10 MPa. Also, compressive stresses of the order of 5-10 MPa transmitted across the major transforms improve the fit to the data. Compressive stresses across convergent margins along the Aleutians and the Middle America trench are important.

Richardson, Randall M.↗
NASA NTRS1975

The transformation of aerodynamic stability derivatives by symbolic mathematical computation

The formulation of mathematical models of aeronautical systems for simulation or other purposes, involves the transformation of aerodynamic stability derivatives. It is shown that these derivatives transform like the components of a second order tensor having one index of covariance and one index of contravariance. Moreover, due to the equivalence of covariant and contravariant transformations in orthogonal Cartesian systems of coordinates, the transformations can be treated as doubly covariant or doubly contravariant, if this simplifies the formulation. It is shown that the tensor properties of these derivatives can be used to facilitate their transformation by symbolic mathematical computation, and the use of digital computers equipped with formula manipulation compilers. When the tensor transformations are mechanised in the manner described, man-hours are saved and the errors to which human operators are prone can be avoided.

Howard, J. C.↗
DOE OSTI2026

Second Order System Study

During my education in mathematics, engineering and physics, I learned transform pairs and their usage mechanics but I never remember seeing the derivations of the solutions to second order ordinary differential equations (ODE) and difference equations. A solution to a question posed in a potential funder meeting put me on a path to solving second order systems using the five principal Fourier based methods: Fourier transform (FT), Z-transform (ZT), discrete time Fourier transform (DTFT), discrete Fourier transform (DFT) and Laplace transform (LT).

42 ENGINEERING↗
DOE OSTI2021

Cell dynamics simulations of coupled charge and magnetic phase transformation in correlated oxides

In this work, we present a comprehensive numerical study on the kinetics of phase transition that is characterized by two nonconserved scalar order parameters coupled by a special linear-quadratic interaction. This particular Ginzburg-Landau theory has been proposed to describe the coupled charge and magnetic transition in nickelates and the collinear stripe phase in cuprates. The inhomogeneous state of such systems at low temperatures consists of magnetic domains separated by quasimetallic domain walls where the charge order is reduced. By performing large-scale cell dynamics simulations, we find a two-stage phase-ordering process in which a short period of independent evolution of the two order parameters is followed by a correlated coarsening process. The long-time growth and coarsening of magnetic domains is shown to follow the Allen-Cahn power law. We further show that the nucleation-and-growth dynamics during phase transformation to the ordered states is well described by the Kolmogorov-Johnson-Mehl-Avrami theory in two dimensions. On the other hand, the presence of quasimetallic magnetic domain walls in the ordered states gives rise to a very different kinetics for transformation to the high-temperature paramagnetic phase. In this scenario, the phase transformation is initiated by the decay of magnetic domain walls into two insulator-metal boundaries, which subsequently move away from each other. Implications of our findings to recent nano-imaging experiments on nickelates are also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗