Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ORBITAL VELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Strategic Center for Networking, Integration, and Communications Orbit Propagation Front-End Software Development

Orbit propagation is fundamental for space-based mission analysis, requiring software tools to predict the time-based positions and velocities of orbiting satellites. Many system analysts currently rely on commercial software, which is effective but expensive. NASA’s Space Communications and Navigation (SCaN) Strategic Center for Networking, Integration, and Communications (SCENIC) project intends to provide these analysis capabilities by using a combination of internal and open-source software, allowing for a greater flexibility while maintaining low costs. Several routines were created to take different forms of user input to translate input into the standard set of orbital elements to be utilized within the current SCENIC analysis capabilities. These inputs range from two-line elements (TLEs) and Cartesian vectors, to coordinate transformations and Walker Delta constellations. These routines will be integrated into the SCENIC user interface (UI) in order to provide greater customization and flexibility for orbit propagation and other dynamic-analysis capabilities.

Kuhl, Nick↗
NASA NTRS1994

Conceptual design of an Orbital Debris Defense System

Man made orbital debris has become a serious problem. Currently NORAD tracks over 7000 objects in orbit and less than 10 percent of these are active payloads. Common estimates are that the amount of debris will increase at a rate of 10 percent per year. Impacts of space debris with operational payloads or vehicles is a serious risk to human safety and mission success. For example, the impact of a 0.2 mm diameter paint fleck with the Space Shuttle Challenger window created a 2 mm wide by 0.6 mm deep pit. The cost to replace the window was over $50,000. A conceptual design for a Orbital Debris Defense System (ODDS) is presented which considers a wide range of debris sizes, orbits and velocities. Two vehicles were designed to collect and remove space debris. The first would attach a re-entry package to de-orbit very large debris, e.g. inactive satellites and spent upper stages that tend to break up and form small debris. This vehicle was designed to contain several re-entry packages, and be refueled and resupplied with more re-entry packages as needed. The second vehicle was designed to rendezvous with and capture debris ranging from 10 cm to 2 m. Due to tracking limitations, no technically feasible method for collecting debris below 10 cm in size could be devised; it must be accomplished through international regulations which reduce the accumulation of space debris.

Bedillion, Erik↗
NASA NTRS1986

Spectroscopic orbits of symbiotic stars - Preliminary results

The present search for radial velocity variations due to orbital motions in symbiotic stars involved observations of 17 such stars at approximately 1-month intervals, as well as of radial velocity variations in the M-giant primary in nine stars. The observed radial velocity curves are commensurate with those expected from a group of binaries having random sin i and about 20 km/sec orbital velocities. Four of the orbital periods thus suggested for seven stars confirm previously known photometric periods, while one confirms a previously known orbital period and two are completely new. Knowledge of the orbits allows identification of those symbiotics that are close to filling their Roche lobes.

Garcia, M. R.↗
NASA NTRS1994

Highly transparent and rugged sensor for velocity determinations of cosmic dust particles

In order to understand the evolution of interplanetary dust, numerous dust particles have been collected and analyzed. An analysis of the composition often provides information on the particle's origin. So does its origin. Composition and orbit data complement each other and should be determined together. If the last orbit of a particle can be determined, its orbital history can often be calculated backward in time and associated with its parent body. To determine the last orbit, the velocity needs to be measured before the particle is collected. The precision required in determining the velocity components relative to the spacecraft should be 1 percent or better. A sensor for naturally charged cosmic dust particles is discussed. Two models of the sensor were tested, one with a free-falling steel ball and the other with particles accelerated to high speed. Analytic expressions of the sensor signals are presented and compared with the test results. The errors in speed and angle were estimated to be about 0.3 percent and 0.2 degrees respectively.

Auer, Siegfried↗
NASA NTRS1989

EX Hydrae in outburst

Photometry and red spectroscopy of the intermediate polar EX Hya in its rare outburst state are presented. Photometry during the declining phase of the July-August 1986 outburst shows the 67-min (spin) modulation to be present with similar characteristics to that in quiescence. In contrast, photometry from near the peak of the 1987 May outburst shows little evidence of the 67-min modulation, while spectroscopy obtained nearly simultaneously is similarly lacking in such evidence, despite its presence in quiescent spectroscopic data. Near the beginning of the May 1987 outburst the H alpha emission line develops a broad, high velocity base component whose velocity is modulated with the orbital cycle. The velocity and phase of the broad base component suggest that it is produced near the magnetosphere of the white dwarf at a point along the projected trajectory of the gas stream from the companion. The feature disappears later in the outburst and is not present during quiescence. It is suggested that the outbursts in EX Hya are caused by an increase in the rate of mass transfer from the companion, and that part of this enhanced mass-transfer stream skims over the top of the accretion disk to strike the magnetosphere directly. The interaction of the stream with the magnetosphere gives rise to the broad-base component observed.

Hellier, C.↗
NASA NTRS2000

Double-Plate Penetration Equations

This report compares seven double-plate penetration predictor equations for accuracy and effectiveness of a shield design. Three of the seven are the Johnson Space Center original, modified, and new Cour-Palais equations. The other four are the Nysmith, Lundeberg-Stern-Bristow, Burch, and Wilkinson equations. These equations, except the Wilkinson equation, were derived from test results, with the velocities ranging up to 8 km/sec. Spreadsheet software calculated the projectile diameters for various velocities for the different equations. The results were plotted on projectile diameter versus velocity graphs for the expected orbital debris impact velocities ranging from 2 to 15 km/sec. The new Cour-Palais double-plate penetration equation was compared to the modified Cour-Palais single-plate penetration equation. Then the predictions from each of the seven double-plate penetration equations were compared to each other for a chosen shield design. Finally, these results from the equations were compared with test results performed at the NASA Marshall Space Flight Center. Because the different equations predict a wide range of projectile diameters at any given velocity, it is very difficult to choose the "right" prediction equation for shield configurations other than those exactly used in the equations' development. Although developed for various materials, the penetration equations alone cannot be relied upon to accurately predict the effectiveness of a shield without using hypervelocity impact tests to verify the design.

Hayashida, K. B.↗
NASA NTRS1980

Hypervelocity impacts on Skylab IV/Apollo windows

A description is presented of some new observations of crater morphology on the Skylab IV/Apollo windows. Aluminum is detected as the only foreign component in six of the seven lined glassy pit craters so far examined by EDS analysis. The most probable source is from aluminum oxide spherules, exhaust effluent of solid fuel rocket motors. The seventh crater contains titanium which may have been derived from an impact of a chip of thermal paint. The size distribution of the lined glassy pit craters appears to be compatible with an origin by hypervelocity impacts of aluminum spherules. If the aluminum oxide spherules are in earth orbit, impact velocities largely in the range of 7 to 10 km/s should be expected. Thus, the impact velocities are well below those expected for most impacts by micrometeorites and these lower velocities may be significant in the development of the lined glassy pit craters. The results indicate that there is a significant population of man-induced micro-debris in earth orbit.

Clanton, U. S.↗
NASA NTRS1999

Pointing Knowledge for SPARCLE and Space-Based Doppler Wind Lidars in General

The SPAce Readiness Coherent Lidar Experiment (SPARCLE) will fly on a space shuttle to demonstrate the use of a coherent Doppler wind lidar to accurately measure global tropospheric winds. To achieve the LOS (Line of Sight) accuracy goal of approx. m/s, the lidar system must be able to account for the orbiter's velocity (approx. 7750 m/s) and the rotational component of the earth's surface motion (approx. 450 m/s). For SPARCLE this requires knowledge of the attitude (roll, pitch and yaw) of the laser beam axis within an accuracy of 80 microradians. (approx. 15 arcsec). Since SPARCLE can not use a dedicated star tracker from its earth-viewing orbiter bay location, a dedicated GPS/INS (Global Positioning System/Inertial Navigation System) will be attached to the lidar instrument rack. Since even the GPS/INS has unacceptable drifts in attitude information, the SPARCLE team has developed a way to periodically scan the instrument itself to obtain less than 10 microradian (2 arcsec) attitude knowledge accuracy that can then be used to correct the GPS/INS output on a 30 minute basis.

Emmitt, G. D.↗
NASA NTRS1992

Space Shuttle Orbiter Crew Hatch Jettison Test using a 0.0405-scale model (16-0) in the Texas A/M low speed wind tunnel (OA362). Space Shuttle aerothermodynamic data report

This report contains post-test information for the Space Shuttle Orbiter Crew Hatch Jettison Test OA362 which was conducted in the Texas A&M Low Speed Wind Tunnel from 6/15/87 to 6/22/87. The test objective was to verify that the crew hatch, once jettisoned, would clear the orbiter under various simulated flight conditions. Several model hatches were used with the 0.0405-scale orbiter (Model 16-0). The model's angle of attack was set at 10, 15, and 20 degrees while the sideslip had values of minus 5, 0, and plus 5 degrees. The full scale Qbars that were simulated were 105, 128, 160, and 210 psf. In the hatch jettison mechanism itself, the plunger pressure was varied to achieve horizontal velocities of 3, 5, 7, and 20.1 feet per second model scale, and the plunger location was varied to achieve a variety of rotational velocities. The orbiter model was subjected to 122 runs with 13 different hatches. Of these, 60 were good runs.

Mitchell, C. E.↗
NASA NTRS1983

Perturbed particle disks

The velocity ellipsoid in a particle disk near an isolated satellite resonance is determined by solving the Boltzmann moment equations, and solutions are obtained that are stationary functions of the azimuthal angle in a coordinate frame which rotates with the pattern speed of the perturbation potential. The magnitude of the deformation rate tensor in a perturbed particle disk is bounded from above by an expression which includes the orbital angular velocity, the optical depth, and a dimensionless constant of order unity. It is also found that, in sufficiently perturbed regions, there are ranges of azimuthal angle over which the radial component of the angular momentum flux is negative. It is also possible for the angular momentum luminosity to be negative. These results are pertinent to the understanding of sharp edges and density wave decay in planetary rings.

Borderies, N.↗
NASA NTRS2008

A New Maneuver for Escape Trajectories

This presentation put forth a new maneuver for escape trajectories and specifically sought to find an analytical approximation for medium thrust trajectories. In most low thrust derivations the idea is that escape velocity is best achieved by accelerating along the velocity vector. The reason for this is that change in specific orbital energy is a function of velocity and acceleration. However, Levin (1952) suggested that while this is a locally optimal solution it might not be a globally optimal one. Turning acceleration inward would drop periapse giving a higher velocity later in the trajectory. Acceleration at that point would be dotted against a higher magnitude V giving a greater rate of change of mechanical energy. The author then hypothesized that decelerating from the initial orbit and then accelerating at periapse would not lead to a gain in greater specific orbital energy--however, the hypothesis was incorrect. After considerable derivation it was determined that this new maneuver outperforms a direct burn when the overall DeltaV budget exceeds the initial orbital velocity (the author has termed this the Heinlein maneuver). The author provides a physical explanation for this maneuver and presents optimization analyses.

Adams, Robert B.↗
NASA NTRS1986

The Orbital Acceleration Research Experiment

The hardware and software of NASA's proposed Orbital Acceleration Research Experiment (OARE) are described. The OARE is to provide aerodynamic acceleration measurements along the Orbiter's principal axis in the free-molecular flow-flight regime at orbital attitude and in the transition regime during reentry. Models considering the effects of electromagnetic effects, solar radiation pressure, orbiter mass attraction, gravity gradient, orbital centripetal acceleration, out-of-orbital-plane effects, orbiter angular velocity, structural noise, mass expulsion signal sources, crew motion, and bias on acceleration are examined. The experiment contains an electrostatically balanced cylindrical proofmass accelerometer sensor with three orthogonal sensing axis outputs. The components and functions of the experimental calibration system and signal processor and control subsystem are analyzed. The development of the OARE software is discussed. The experimental equipment will be enclosed in a cover assembly that will be mounted in the Orbiter close to the center of gravity.

Blanchard, R. C.↗
NASA NTRS1971

Some three-body numerical solutions for low-thrust orbiter missions.

A ?velocity at the sphere of influence' method and an asymptotic matching method of patching together two-body low thrust solutions are compared to a number of three-body numerical results for outer planet orbiter missions. The two patching methods compare well with the numerical three-body results and do not depend on any particular choice for the size of the sphere of influence. The results apply, in a strict sense, only to the operational mode used-high-thrust terminal retro into orbit. Low-thrust spirals are not considered in the three-body analysis. The terminal low-thrust phase of thrusting is almost entirely reverse to the velocity vector during the planet centered phase of the trajectory. This may lead to important simplifications for low-thrust guidance and navigation procedures.

Mackay, J. S.↗
NASA NTRS2015

Characterization of Orbital Debris Via Hyper-Velocity Ground-Based Tests

To replicate a hyper-velocity fragmentation event using modern-day spacecraft materials and construction techniques to better improve the existing DoD and NASA breakup models. DebriSat is intended to be representative of modern LEO satellites.Major design decisions were reviewed and approved by Aerospace subject matter experts from different disciplines. DebriSat includes 7 major subsystems. Attitude determination and control system (ADCS), command and data handling (C&DH), electrical power system (EPS), payload, propulsion, telemetry tracking and command (TT&C), and thermal management. To reduce cost, most components are emulated based on existing design of flight hardware and fabricated with the same materials. A key laboratory-based test, Satellite Orbital debris Characterization Impact Test (SOCIT), supporting the development of the DoD and NASA satellite breakup models was conducted at AEDC in 1992 .Breakup models based on SOCIT have supported many applications and matched on-orbit events reasonably well over the years.

Cowardin, Heather↗