SEARCH · Engineering Papers
Results for “Nanoparticles”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Synthesis of 1 nm Pd Nanoparticles in a Microfluidic Reactor: Insights from in Situ X ray Absorption Fine Structure Spectroscopy and Small-Angle X ray Scattering
In this paper we show that the temporal separation of nucleation and growth is not a necessary condition for the colloidal synthesis of monodisperse nanoparticles. The synthesis mechanism of Pd nanoparticles was determined by in situ XAFS and SAXS in a microfluidic reactor capable of millisecond up to an hour time resolution. The SAXS results showed two autocatalytic growth phases, a fast growth phase followed by a very slow growth phase. The steady increase in the number of particles throughout the two growth phases indicates the synthesis is limited by slow continuous nucleation. The transition from fast to slow growth was caused by rapid increase in bonding with the capping agent as shown by XAFS. Based on this fundamental understanding of the synthesis mechanism, we show that 1 nm monodisperse Pd nanoparticles can be synthesized at low temperature using a strong binding capping agent such as trioctylphosphine (TOP).
Interpolymer Complexation as a Strategy for Nanoparticle Assembly and Crystallization
Abstract not provided
Oxidative Dehydrogenation of Cyclohexane on Cobalt Oxide (Co 3 O 4 ) Nanoparticles: The Effect of Particle Size on Activity and Selectivity
The oxidative dehydrogenation of cyclohexane by cobalt oxide nanoparticles was studied via temperature programmed reaction combined with in situ grazing incidence X-ray absorption spectroscopy and grazing incidence small-angle X-ray scattering and theoretical calculations on model Co 3 O 4 substrates. Both 6 and 12 nm Co 3 O 4 nanoparticles were made through a surfactant-free preparation and dispersed on an Al 2 O 3 surface formed by atomic layer deposition. Under reaction conditions the nanoparticles retained their oxidation state and did not sinter. They instead underwent an assembly/disassembly process and could reorganize within their assemblies. The selectivity of the catalyst was found to be size- and temperature-dependent, with larger particles preferentially producing cyclohexene at lower temperatures and smaller particles predominantly resulting in benzene at higher temperatures. The mechanistic features thought to control the oxidative dehydrogenation of cyclohexane and other light alkanes on cobalt oxide were established by carrying out density functional theory calculations on the activation of propane, a surrogate model alkane, over model Co 3 O 4 surfaces. The initial activation of the alkane (propane) proceeds via hydrogen abstraction over surface oxygen sites. The subsequent activation of the resulting alkoxide intermediate occurs at a second surface oxygen site to form the alkene (propene) which then desorbs from the surface. Hydroxyl recombination results in the formation of water which desorbs from the surface. Finally, oxygen is necessary to regenerate the surface oxygen sites, catalyze C–H activation steps, and minimize catalyst degradation.
Nanoparticle uptake: Charge matters in fish
Several studies in cells and different organisms have shown that size, shape, surface chemistry and surface area of nanomaterials can affect the way they interact with biological and environmental systems. However, the results from these studies remain inconclusive and, in some cases, difficult to interpret because the toxic effects may not be related to the nanoparticles themselves. Using well-defined gold nanoparticles that do not aggregate or dissociate into ions, Vincent Rotello and co-workers at the University of Massachusetts now show that surface properties can affect the way fish take up and remove nanoparticles from their systems.
Spin canting across core/shell Fe[subscript 3]O[subscript 4]/Mn[subscript x]Fe[subscript 3;#8722;x]O[subscript 4] nanoparticles
Abstract not provided
A single-Pt-atom-on-Ru-nanoparticle electrocatalyst for CO-resilient methanol oxidation
Single Pt atom catalysts are key targets because a high exposure of Pt substantially enhances electrocatalytic activity. In addition, PtRu alloy nanoparticles are the most active catalysts for the methanol oxidation reaction. To combine the exceptional activity of single Pt atom catalysts with an active Ru support we must overcome the synthetic challenge of forming single Pt atoms on noble metal nanoparticles. In this report we demonstrate a process that grows and spreads Pt islands on Ru branched nanoparticles to create single-Pt-atom-on-Ru catalysts. By following the spreading process by in situ TEM, we found that the formation of a stable single atom structure is thermodynamically driven by the formation of strong Pt–Ru bonds and the lowering of the surface energy of the Pt islands. The stability of the single-Pt-atom-on-Ru structure and its resilience to CO poisoning result in a high current density and mass activity for the methanol oxidation reaction over time.
Super-resolution fluorescence nanoscopy applied to imaging core–shell photoswitching nanoparticles and their self-assemblies
Explore the source record for details and available documents.
Reversible Fe(II) uptake/release by magnetite nanoparticles
Magnetite commonly coexists with aqueous Fe2+ (Fe2+(aq)) in anoxic subsurface environments. Complex interactions between magnetite and Fe2+(aq) profoundly impact redox potential fluctuations in surrounding environment and biogeochemical cycles of important elements and contaminants. However, the ability of magnetite to act as a source/sink of electron equivalents through fluctuations in solution pH or the activity of Fe2+(aq) remains poorly quantified. We systematically studied the interrelationships between equilibrium Fe2+(aq) concentrations and structural versus surface-localized Fe?II)/Fe?III) ratios in magnetite using micro X-ray diffraction and synchrotron-based X-ray magnetic circular dichroism, respectively, under different controlled experimental conditions. Relative to pH 7, at pH 6 proton-promoted dissolution yields Fe2+(aq) release from magnetite nanoparticles, coupled to a decrease in the structural Fe?II)/Fe?III) ratio by electron hopping along the octahedral sublattice from the particle interior to the surface. At pH 8, magnetite sorbs Fe2+(aq), increasing both the structural and surface-localized Fe?II)/Fe?III) ratio. Amendments of Fe2+(aq) inhibit acidic Fe2+(aq) release and promote Fe2+(aq) uptake at more basic conditions, whereas increasing magnetite loading facilitates Fe2+(aq)–magnetite interaction at the same respective pH extremes. The reversible flow of Fe?II) across the magnetite–solution interface under different conditions implies that the redox reactivity of magnetite nanoparticles is quickly responsive to changes in environmental conditions, such as an increase in pH due to groundwater passing through carbonate-rich rocks, via a dynamic redistribution of electron equivalents between particle interiors and the solid/water interface.
pH-Induced reorientation of cytochrome c on silica nanoparticles
The orientation of ellipsoidal cytochrome c molecules at the surface of silica nanoparticles was studied in a wide pH range by combining small-angle neutron scattering, adsorption measurements, and molecular dynamics simulations.
Combined Plasmonic Au-nanoparticle and Conducting Metal Oxide High-temperature Optical Sensing with LSTO
<span style="color: rgba(0, 0, 0, 0.79); font-family: "Source Sans Pro", source-sans-pro, museo_sans300, museo-sans, Arial, sans-serif; font-size: 16px; background-color: rgb(255, 255, 255);">Fiber optic sensor technology offers several advantages for harsh-environment applications. However, the development of optical gas sensing layers that are stable under harsh environmental conditions is an ongoing research challenge. In this work, electronically conducting metal oxide lanthanum-doped strontium titanate (LSTO) films embedded with gold nanoparticles are examined as a sensing layer for application in reducing gas flows at high temperature (600–800 °C). A strong localized surface plasmon resonance (LSPR) based response to hydrogen is demonstrated in the visible region of the spectrum, while a Drude free electron-based response is observed in the near-IR. Characteristics of these responses are studied both on planar glass substrates and on silica fibers. Charge transfer between the oxide film and the gold nanoparticles is explored as a possible mechanism governing the Au LSPR response and is considered in terms of the corresponding properties of the conducting metal oxide-based matrix phase. Principal component analysis is applied to the combined plasmonic and free-carrier based response over a range of temperatures and hydrogen concentrations. It is demonstrated that the combined visible and near-IR response of these films provides improved versatility for multiwavelength interrogation, as well as improved discrimination of important process parameters (concentration and temperature) through application of multivariate analysis techniques.</span>
Fluorescence enhancement of light-harvesting complex 2 from purple bacteria coupled to spherical gold nanoparticles
Explore the source record for details and available documents.
Optically detected, single nanoparticle mass spectrometer with pre-filtered electrospray nanoparticle source
An instrument designed for non-destructive mass analysis of single trapped nanoparticles is described. The heart of the instrument is a 3D quadrupole (Paul) trap constructed to give optical access to the trap center along ten directions, allowing passage of lasers for particle heating and detection, particle injection, collection of scattered or fluorescent photons for particle detection and mass analysis, and collection of particles on TEM grids for analysis, as needed. Nanoparticles are injected using an electrospray ionization (ESI) source, and conditions are described for spraying and trapping polymer particles, bare metal particles, and ligand stabilized particles with masses ranging from 200 kDa to >3 GDa. Conditions appropriate to ESI and injection of different types of particles are described. The instrument is equipped with two ion guides separating the ESI source and nanoparticle trap. The first ion guide is mostly to allow desolvation and differential pumping before the particles enter the trap section of the instrument. The second is a linear quadrupole guide, which can be operated in mass selective or mass band-pass modes to limit transmission to species with mass-to-charge ratios in the range of interest. With a little experience, the design allows injection of single particles into the trap upon demand.