SEARCH · Engineering Papers
Results for “Nano structures”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Enhanced thermoelectric performance of graphene nanoribbon-based devices
There have been numerous theoretical studies on exciting thermoelectric properties of graphene nano-ribbons (GNRs); however, most of these studies are mainly based on simulations. In this work, we measure and characterize the thermoelectric properties of GNRs and compare the results with theoretical predictions. Our experimental results verify that nano-structuring and patterning graphene into nano-ribbons significantly enhance its thermoelectric power, confirming previous predictions. Although patterning results in lower conductance (G), the overall power factor (S{sup 2}G) increases for nanoribbons. We demonstrate that edge roughness plays an important role in achieving such an enhanced performance and support it through first principles simulations. We show that uncontrolled edge roughness, which is considered detrimental in GNR-based electronic devices, leads to enhanced thermoelectric performance of GNR-based thermoelectric devices. The result validates previously reported theoretical studies of GNRs and demonstrates the potential of GNRs for the realization of highly efficient thermoelectric devices.
Tuning the extent of porosity and composition of N-doped carbon materials by NaNO3 and its effect on electrochemical activity
Highlights: • One-pot method using cheap NaNO{sub 3} as etching agent was developed to tune the porous structure. • NaNO{sub 3} was added into NaCl/ZnCl{sub 2} (NaCl 80 mol%) to form ionothermal salts. • The resultant carbon possesses a 3D hierarchical structure, with more mesopores ratio than micropores. • When NaNO{sub 3} amount is 5% in the salt mixture, the optimal ORR activity was obtained. - Abstract: A facile one-pot method using NaNO{sub 3} as etching agent in a molten salt medium is developed to tune the porous structure and composition of N-doped carbon materials derived from biomass at high temperatures. SEM and TEM analyses reveal that by increasing the amount of NaNO{sub 3}, the structures of the obtained carbons become more open and graphene-like layers are formed. N{sub 2} adsorption/desorption isotherms show that the hierarchical porous structure could be efficiently tuned by adjusting the amount of NaNO{sub 3} in the salt mixture. It is observed that the specific surface area of the as-prepared N-doped carbon using NaNO{sub 3} can reach 1430.1 m{sup 2} g{sup −1}, a much higher value than that of the sample prepared in the absence of NaNO{sub 3}. The micropore ratio decreases with increased amount of NaNO{sub 3}, from 49.42% to 9.98%. Whilst the surface composition of the obtained carbon materials is affected by NaNO{sub 3}. The N content increases and O decreases respectively, by increasing the amount of NaNO{sub 3}. Analysis on the N 1s high resolution reveals that the sum of pyridinic-N and graphitic-N increased, whereas the sum of pyridinic-N oxide and NO{sub x} decreases from NC-0 to NC-0.75. It is also found that the changes of the porous structure and the oxygen-containing groups from NC-0 to NC-0.75 led to changes in hydrophilicity. When the as-prepared carbon materials are used as catalysts for the oxygen reduction reaction, high catalytic activity values are obtained, sample NC-0.5 shows the best performance due to the porous structure and doping effect of N atoms. More importantly, it is concluded that producing N-doped carbon materials from soybean dregs in molten salt medium using NaNO{sub 3} as etching agent could provide a promising approach for the synthesis of opened N-doped carbons of controlled porous structures and large specific surface areas based on biomass precursors.
Development of Nano-Modified Concrete for Next Generation of Storage Systems
The goal of the research was to develop a superior concrete for the long-term storage of used nuclear fuel by engineering concrete at the nanoscale through the incorporation of nano-sized and nano-structured particles based on enhanced reactivity (not fiber reinforcement). The specific objectives were to determine for nano-modified concrete: 1. The effects of environmental weathering (i.e., wet/dry and ingress of reactive species such as chloride and sulfate from the marine environment or other sources) and exposure to radiation and thermal environments on the structural stability and microstructural evolution of the material; 2. How microstructural and morphological changes from environmental weathering and thermal and radiation damage affect the long-term, macroscale performance of the material; and, 3. Identify formulation envelopes for nanoparticle content and combinations to achieve superior concrete criteria for dry storage systems by integrating and extending existing predictive modeling approaches that couple reactive transport and thermo- chemo- and radiation induced damage. The major findings of this work are summarized as follows. The results are being processed and compiled in manuscripts for peer-reviewed publication. Due to the late access to the gamma irradiation facility, material characterization is continuing. Dispersion/agglomeration of nanoparticles in cement pastes. The dispersion/agglomeration of nanoparticles (NPs) of SiO 2 , TiO 2 , Al 2 O 3 , Fe 2 O 3 , and clay (bentonite and halloysite) in water, with and without polycarboxylate-based high range water reducer (P-HRWR), and in the environment of hydrating cement have been investigated. The intrinsic particle characteristics, surface charge, pH, monovalent and divalent ion concentrations in solution, and modes of interaction of the NPs with P-HRWR influenced the NP behavior in solution.
Spatial filter based light-sheet laser interference technique for three-dimensional nanolithography
We propose a laser interference technique for the fabrication of 3D nano-structures. This is possible with the introduction of specialized spatial filter in a 2π cylindrical lens system (consists of two opposing cylindrical lens sharing a common geometrical focus). The spatial filter at the back-aperture of a cylindrical lens gives rise to multiple light-sheet patterns. Two such interfering counter-propagating light-sheet pattern result in periodic 3D nano-pillar structure. This technique overcomes the existing slow point-by-point scanning, and has the ability to pattern selectively over a large volume. The proposed technique allows large-scale fabrication of periodic structures. Computational study shows a field-of-view (patterning volume) of approximately 12.2 mm{sup 3} with the pillar-size of 80 nm and inter-pillar separation of 180 nm. Applications are in nano-waveguides, 3D nano-electronics, photonic crystals, and optical microscopy.
Facile synthesized nanorod structured vanadium pentoxide for high-rate lithium batteries
Nano-structured vanadium oxide (V2O5) is fabricated via facile thermal-decomposition of a vanadium precursor and vanadyl oxalate produced by reacting micro-sized V2O5 with oxalic acid. The V2O5 nanorods produced by this method exhibit much better electrochemical performance than commercial micro-sized V2O5. The optimized-nanorod electrodes with a high density of (001) planar defects give the best specific discharge capacities of 270 mAh g-1 at C/2 (147 mA g-1) coupled with good cycle stability with only 0.32% fading per cycle. Even at a high rate of 4C (1176 mA g-1), the nanorod electrode still delivers 198 mAh g-1. These results suggest that the nanostructured V2O5 is a good cathode for high-rate, lithium-ion battery applications.
Electrical and structural characterization of nano-carbon–aluminum composites fabricated by electro-charging-assisted process
Incorporating nano-carbon phases into metal-matrix composites is a promising strategy for simultaneously enhancing electrical conductivity and mechanical properties of metals. Here, we describe the manufacture of novel nano-carbonaluminum composites by an electro-charge-assisted process (EAP) that show 5.6% ± 1.7% increase in electrical conductivity compared to the base metal alloy. The source of nano-carbon that we used in this study is activated carbon with particle size less than 100 nm. The enhancement is attributed to nano-graphitic structures that extend through the lattice of the metal. Through electron transfer from the metal to the nanostructures the electron density at the interface of nano-crystalline graphite and the metal lattice increases thereby enhancing the bulk electrical conductivity. We identify the important fabrication parameters of the EAP for a reaction system employing a tapered graphite cathode. Here, a high current density of 100 A/cm 2 causes ionization and crystallization of the carbon in the liquid metal. The increase in electrical conductivity of the composite are directly related to the incorporation of the nanocrystalline carbon in the metal lattice. The superior performance of these nano-carbon aluminum composites makes them promising candidates for power transmission lines and other applications.
High performance anode for advanced Li batteries
The overall objective of this Phase I SBIR effort was to advance the manufacturing technology for ASI’s Si-CNF high-performance anode by creating a framework for large volume production and utilization of low-cost Si-coated carbon nanofibers (Si-CNF) for the battery industry. This project explores the use of nano-structured silicon which is deposited on a nano-scale carbon filament to achieve the benefits of high cycle life and high charge capacity without the consequent fading of, or failure in the capacity resulting from stress-induced fracturing of the Si particles and de-coupling from the electrode. ASI’s patented coating process distinguishes itself from others, in that it is highly reproducible, readily scalable and results in a Si-CNF composite structure containing 25-30% silicon, with a compositionally graded interface at the Si-CNF interface that significantly improve cycling stability and enhances adhesion of silicon to the carbon fiber support. In Phase I, the team demonstrated the production of the Si-CNF anode material can successfully be transitioned from a static bench-scale reactor into a fluidized bed reactor. In addition, ASI made significant progress in the development of low cost, quick testing methods which can be performed on silicon coated CNFs as a means of quality control. To date, weight change, density, and cycling performance were the key metrics used to validate the high performance anode material. Under this effort, ASI made strides to establish a quality control protocol for the large volume production of Si-CNFs and has identified several key technical thrusts for future work. Using the results of this Phase I effort as a foundation, ASI has defined a path forward to commercialize and deliver high volume and low-cost production of SI-CNF material for anodes in Li-ion batteries.
Calcium Sulfate and Calcium Carbonate Scaling of Thin-Film Composite Polyamide Reverse Osmosis Membranes with Surface-Tethered Polyacrylic Acid Chains
The gypsum and calcite scaling propensities of the thin-film composite polyamide (PA-TFC) reverse osmosis (RO) membrane, modified with a tethered surface layer of polyacrylic acid (PAA) chains, was evaluated and compared to the scaling of selected commercial RO membranes. The tethered PAA layer was synthesized onto a commercial polyamide membrane (i.e., base-PA) via atmospheric pressure plasma-induced graft polymerization (APPIGP). The PAA nano-structured (SNS) base-PA membrane (SNS-PAA-PA) was scaled to a lesser degree, as quantified by a lower permeate flux decline and surface imaging, relative to the tested commercial membranes (Dow SW30, Toray SWRO, and BWRO). The cleaning of gypsum-scaled membranes with D.I. water flushing achieved 100% water permeability recovery for both the SNS-PAA-PA and Dow SW30 membranes, relative to 92–98% permeability restoration for the Toray membranes. The calcium carbonate scaling of SNS-PAA-PA membranes was also lower relative to the commercial membranes, but permeability recovery after D.I. water cleaning was somewhat lower (94%) but consistent with the level of surface scale coverage. In contrast, the calcite and gypsum-scaled membrane areas of the commercial membranes post-cleaning were significantly higher than for the SNS-PAA-PA membrane but with 100% permeability recovery, suggesting the potential for membrane damage when mineral scaling is severe.
Short-pulse Laser Induced Transient Structure Formation and Ablation Studied with Time-resolved Coherent XUV-scattering
The structural dynamics of short-pulse laser irradiated surfaces and nano-structures has been studied with nm spatial and ultrafast temporal resolution by means of single-shot coherent XUV-scattering techniques. The experiments allowed us to time-resolve the formation of laser-induced periodic surface structures, and to follow the expansion and disintegration of nano-objects during laser ablation.
XPS Analysis of Nanostructured Materials and Biological Surfaces
This paper examines the types of information that XPS can provide about a variety of nano-structured materials. Although it is sometimes not considered a “nano-scale analysis method” XPS can provide a great deal of information about elemental distributions, layer or coating structure and thicknesses, surface functionality, and even particles sizes on the 1-20 nm scale for samples types that may not be readily analyzed by other methods. This information is important for both synthetic nanostructured or nanosized materials and a variety of natural materials with nanostructure. Although the links between nanostructure materials and biological systems may not at first be obvious, many biological molecules and some organisms are the sizes of nanoparticles. The nanostructure of cells and microbes plays a significant role in how they interact with their environment. The interaction of biomolecules with nanoparticles is important for medical and toxicity studies. The interaction of biomolecules is important for sensor function and many nanomaterials are now the active elements in sensors. This paper first discusses how nanostructures influences XPS data as part of understanding how simple models of sample structure and data analysis can be used to extract information about the physical and chemical structure of the materials being analyzed. Equally important, aspects of sample and analysis limitations and challenges associated with understanding nanostructured materials are indicated. Examples of the application of XPS to nanostructured and biological systems and materials are provided.
Doping in controlling the type of conductivity in bulk and nanostructured thermoelectric materials
Doping of materials for thermoelectric applications is widely used nowadays to control the type of conductivity. We report the results of ab-initio calculations aimed at developing the consistent scheme for determining the role of impurities that may change the type of conductivity in two attractive thermoelectric classes of materials. It is demonstrated that alloying of TiNiSn with Cu makes the material of n-type, and alloying with Fe leads to p-type conductivity. Similar calculations for PbTe with small amount of Na substituting for Pb leads to p-type conductivity, while Cl substituting for Te makes PbTe an n-type material. It is shown also that for nano-grained materials the n-type conductivity should be observed. The effect of impurities segregating to the grain boundaries in nano-structured PbTe is also discussed. - Highlights: • Bulk and nano-grained TE materials were analyzed by DFT. • The electronic effects on both PbTe and TiNiSn were demonstrated. • The role of impurities on the conductivity type was analyzed. • Interfacial states in nano-grained PbTe affect the conductivity type.
Exploring the Random Phase Approximately for materials chemistry and physics
This proposal focuses on improved accuracy for the delicate energy differences of interest in materials chemistry with the fully nonlocal random phase approximation (RPA) in a density functional context. Could RPA or RPA-like approaches become standard methods of first-principles electronic-structure calculation for atoms, molecules, solids, surfaces, and nano-structures? Direct RPA includes the full exact exchange energy and a nonlocal correlation energy from the occupied and unoccupied Kohn-Sham orbitals and orbital energies, with an approximate but universal description of long-range van der Waals attraction. RPA also improves upon simple pair-wise interaction potentials or vdW density functional theory. This improvement is essential to capture accurate energy differences in metals and different phases of semiconductors. The applications in this proposal are challenges for the simpler approximations of Kohn-Sham density functional theory, which are part of the current “standard model” for quantum chemistry and condensed matter physics. Within this project we already applied RPA on different structural phase transitions on semiconductors, metals and molecules. Although RPA predicts accurate structural parameters, RPA has proven not equally accurate in all kinds of structural phase transitions. Therefore a correction to RPA can be necessary in many cases. We are currently implementing and testing a nonempirical, spatially nonlocal, frequency-dependent model for the exchange-correlation kernel in the adiabatic-connection fluctuation-dissipation context. This kernel predicts a nearly-exact correlation energy for the electron gas of uniform density. If RPA or RPA-like approaches prove to be reliably accurate, then expected increases in computer power may make them standard in the electronic-structure calculations of the future.
Plasmonic circular polarization analyzer formed by unidirectionally controlling surface plasmon propagation
Analyzing the polarization of a circularly polarized light is a critical issue. We have fabricated a spiral nano-structure on the Au film by using focused ion beam etching technique. The fabricated structure can be used as a plasmonic circular polarization analyzer. By designing the relative orientation of two nano-apertures in the spiral structural unit, the propagation direction of the surface plasmon polaritons excited by circularly polarized light of opposite handedness can be controlled. Therefore, the spiral structure could be used to accurately determine the helicity of the excited circularly polarized light. Based on the results of scanning near-field optical microscopy, the obtained circular polarization extinction ratio of this structure was above 500. This structure can be used for a flexible detecting size and a very wide spectrum.
Nano-Bio Quantum Technology for Device-Specific Materials
The areas discussed are still under development: I. Nano structured materials for TE applications a) SiGe and Be.Te; b) Nano particles and nanoshells. II. Quantum technology for optical devices: a) Quantum apertures; b) Smart optical materials; c) Micro spectrometer. III. Bio-template oriented materials: a) Bionanobattery; b) Bio-fuel cells; c) Energetic materials.
A study of angle dependent surface plasmon polaritons in nano-hole array structures
We report that the light-matter interaction in metallic nano-hole array structures possess a subwavelength hole radius and periodicity. The transmission coefficient for nano-hole array structures was measured for different angles of incidence of light. Each measured transmission spectrum had several peaks due to surface plasmon polaritons. A theory of the transmission coefficient was developed based on the quantum density matrix method. It was found that the location of the surface plasmon polariton and the heights of the spectral peaks were dependent on the angle of incidence of light. Good agreement was observed between the experimental and theoretical results. This property of these structures has opened up new possibilities for sensing applications.
Materials Challenges in Space Exploration
United States civil space program administered by National Aeronautics and Space Administration (NASA) has a new strategic direction to explore the solar system. This new 'vision for space exploration' encompasses a broad range of human and robotic missions, including the Moon, Mars and destinations beyond. These missions require advanced systems and capabilities that will accelerate the development of many critical technologies, including advanced materials and structural concepts. Specifically, it is planned to develop high-peformance materials for vehicle structures, propulsion systems, and space suits; structural concepts for modular assembly for space infrastructure; lightweight deployable and inflatable structures for large space systems and crew habitats; and highly integrated structural systems and advanced thermal management systems for reducing launch mass and volume. This paper will present several materials challenges in advanced space systems-high performance structural and thermal materials, space durable materials, radiation protection materials, and nano- structural materials. The paper will also address smart materials and structures and examine space environmental effects on materials and methods of mitigating them. Finally, the paper will take a look at the possibility of utilizing materials in situ, i.e., processing and using desired materials on the surface of the Moon and Mars.
Optoelectronic and low temperature thermoelectric studies on nanostructured thin films of silver gallium selenide
Polycrystalline thin films of silver gallium selenide were deposited on ultrasonically cleaned soda lime glass substrates by multi-source vacuum co-evaporation technique. The structural analysis done by X-ray diffraction ascertained the formation of nano structured tetragonal chalcopyrite thin films. The compound formation was confirmed by X-ray photo-electron spectroscopy. Atomic force microscopic technique has been used for surface morphological analysis. Direct allowed band gap ∼1.78eV with high absorption coefficient ∼10{sup 6}/m was estimated from absorbance spectra. Low temperature thermoelectric effects has been investigated in the temperature range 80–330K which manifested an unusual increase in Seebeck coefficient with negligible phonon drag toward the very low and room temperature regime. The electrical resistivity of these n-type films was assessed to be ∼2.6Ωm and the films showed good photo response.