Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NSLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Experimentally demonstrating the current shifting between fast and slow correctors in NSLS-II SR when the FOFB is on

In the following, we describe a method of shifting strengths of fast correctors to slow correctors, while the fast orbit feedback (FOFB) is turned on. This method has been developed to prevent saturation of the fast correctors, which results in degradation of the FOFB performance. At NSLS-II, we experimentally demonstrated a successful fast-to-slow corrector strength transfer. The maximal fast corrector current has been reduced from greater than 0.45 A to less than 0.04 A. At the same time, the beam orbit was stabilized within ±1 μm level, which is acceptable by the operational standard. Now, the method is ready for release to the routine operations.

36 MATERIALS SCIENCE↗

The R&D of NSLS-II Girder Profiling

A precise state-of-the-art vibrating wire technique will be adopted to achieve the challenging ±30 μm magnet-magnet positioning requirement in NSLS-II storage ring. However, girder profile variation after relocation will merge all the efforts of precise magnet alignment. Girder profiling, a 2-steps process including baseline establishment and restoration in tunnel which never been applied before in accelerator field, will be implemented to keep the girder profile between magnetic measurement room and tunnel as close as possible. Laser tracker is chosen as the main instrument. Tests in environmentally controlled room indicate that a repeatability accuracy of ±10 μm can be achieved by laser tracker in several days period and it has the resolution of better than ±5 μm if serving as an indicator. Simulations and tests prove that an accuracy of better than ±10 μm can be achieved for both steps; therefore, the final magnet-magnet alignment accuracy can be better than ±20 μm. Most of the R&D activities will be presented.

36 MATERIALS SCIENCE↗

NSLS-II SR Commissioning Report

The NSLS-II storage ring (SR) phase I commissioning has been successfully completed in May 12, 2014. In accordance to the project milestone, 25 mA average current was achieved in the storage ring with PETRA III 500 MHz 7-cell PETRA-III RF cavity but w/o ID’s and Landau cavities. In about 5 weeks we delivered a 3 GeV beam to the ring injection straight section, made the 1st turn around the ring, achieved hundreds of turns optimizing injection, stored beam having sextupoles and RF turned ON. Injection efficiency was achieved 95%, close orbit rms value is ~100 um, tune and chromaticity were measured and adjusted as desired, and beam lifetime was a few hours depending on the stored beam current. This report consists of a summary, a chronological part, the injector system performance in Ch3, SR commissioning experience in Ch4 and the outlook of remaining work in Ch5. The SR commissioning experience includes the software experience, hardware (timing, diagnostics, RF, vacuum, PS) operation experience, the strategy for initial injection beam to the stored beam, measurement of the linear optics and control to the desired value, nonlinear beam dynamics study, beam instability study, the subsystem reliability and fault study at different scenarios.

36 MATERIALS SCIENCE↗

Loss Control and Monitoring Systems for NSLS-Ii

The tunnel shielding design for the NSLS-II will provide adequate protection for beam losses up to 13nC/min or 100% of the maximum top-off injection beam current to be lost in the two periods of the ring around the injection point, while the remainder of the ring is shielded for lower losses of 1.1nC/min or ≤10% of the maximum top-off injected beam current. Additional local shielding of potential loss points in the injection region (e.g. injection septum) will be used to increase the level of loss allowed at these location during 1 Hz injection (i.e. nonTop-off injection). This shielding design will require a system to insure that beam losses don’t exceed these levels for a period of time that could potentially cause levels of radiation outside the shield walls to exceed administrative levels. This Loss Control and Monitoring (LCM) system will provide a level of loss control, loss location measurements and provide alarm indication of the level of beam power losses along the beam path from the source (e-gun, linac) thru the injection system and the storage ring. This system will consist of collimators and scrapers that will provide limits to the beam miss-steering and control the loss points of the charge, and monitors that will measure the average beam current losses along the beam path and alarm when this beam power loss exceeds the level set by the shielding specifications or administrative levels. This will require some new ideas in beam loss detection capability and collimation. The system is not intended to trip interlocks (dumping beam or terminating injection) but only to alarm that higher than normal beam power losses are observed and report where it is occurring. If the alarms conditions are not corrected within a time limit, top-off injection could be slowed down, thereby reducing the beam loss and the radiation it may be producing.

36 MATERIALS SCIENCE↗

The NSLS-II Alignment Coordinate System Conventions

For NSLS-II construction activities, a construction coordinate system is established with certain connections to geodetic NY State Plane Coordinate System, while physicists design the lattice and layout of accelerator and beam lines in a relatively dependent virtual space with their beam following coordinate system. In engineering design process, mechanical drawing designers, and beam line experts may both have their own coordinate system in a self-convenient manner. This situation will bring out problems of consistency and eventually lead to potential chaos for survey and alignment work. Therefore, it prompts to establish coordinate conventions recognized by all the relevant groups in order to smooth the coordinate processing flow when executing the alignment task according to specific design. Here descriptions about several existing coordinate system will be delineated and the definition of accelerator alignment coordinate system will be emphasized. The rotation and translation mathematical parameters will be given to allow for easy transformation. All the units are in meters. A programming code has been written to deal with a key requirement of integrating components’ fiducials into storage ring coordinate system. The parameters and code can be validated and tested by relevant groups.

36 MATERIALS SCIENCE↗

The NSLS-II Components Relative Alignment Deviation Estimate

The alignment of NSLS-II components will be conducted under the constraint of survey control network. The control network system is categorized as outside, primary and secondary control networks, and all of them have random errors due to measurement random errors. In the error propagation point of view, they all will contribute to the final positioning accuracy of each component in global sense. However, as the global positioning requirement is relative loose (i.e. ± 3mm for storage ring), relative positioning accuracy is what we really concern. In this situation, only secondary control network will contribute as only secondary monuments will be employed to direct the adjustment of components. Other error sources include instrument setup error, adjustment residuals and slab movement etc. This article will analyze the maximum relative deviation of 3 positions in one cell’s region, which is a simulation of 1 ID and 2 Vacuum chamber positions.

36 MATERIALS SCIENCE↗

Analysis of Mis-Steered Electron Beam in the NSLS-II Storage Ring

This note reports the analysis of the mis-steered electron in the NSLS-II storage ring for the determination of supplementary shielding. The potential angles and offsets of the mis-steered beam are calculated by implementing the cascaded parameter scan (CPS) along the beam-line. This method is originally developed for the top-off safety analysis, and has been well documented in ref. The basic idea of CPS is to combine the phase space images due to different magnet set-points into one superset, then re-populate virtual particles on a fine grid as the input of the downstream magnet scanning. The purpose of re-population in phase space is to avoid the redundant particle tracking calculation due to the multi-layer overlap of different magnet settings. A parallel python code of implementing the tracking study has been written, and benchmarked with other top-off safety simulators developed in SLAC and LBNL.

36 MATERIALS SCIENCE↗

NSLS-II Storage Ring Layout and Components

The NSLS-II storage ring consists of 30 cells with alternating long (9.3m) and short (6.6m) straights. The layout of the magnets and the vacuum components has 15-fold symmetry, even though some of the components, such as scrapers, strip lines, are put in asymmetrically at only a few places. The insertion devices will likely be different for each straight; therefore the magnet strength will be slightly adjusted when IDs are installed.

36 MATERIALS SCIENCE↗

Analysis of Coupled Bunch Instabilities in the NSLS-II Storage Ring with a 7-cell PETRA-III RF Structure

We studied the coupled-bunch instability driven by a 7-cell PETRA-III cavity structure, which is considered to be installed in the commissioning Phase 1 in the NSLS-II storage ring at an average current of 25mA. For instability threshold calculations we used the parameters of the bare lattice (no DW’s and Landau cavities). The transverse and longitudinal coupled-bunch instabilities can be driven by the higher order modes (HOM’s) of the 7-cell PETRA-III cavity structure. In the case of uniform filling the beam is longitudinally stable, and transversely unstable at zero chromaticity. To increase the transverse instability threshold we studied the stabilizing effect of the slow head-tail instability at positive chromaticity. We assume the slow head tail effect is driven by a broadband resonator impedance. In the case of all RF buckets filled (M=1320 bunches, N=3.1x10 8 particles per bunch) the beam is unstable for values of the chromaticity in the range [0 2]. To increase the damping provided by the slow head-tail effect, we discuss fillings with a larger number of particles per bunch. We analyze uniform filling configurations with M=132 (N=3.1x10 9 ) and M=66 (N=6.2x10 9 ). We also discussed HOM’s frequencies detuning based upon temperature change as a cure of the coupled-bunch instabilities, and proposed working points to make the 7-cell PETRA-III cavity structure stable under coupled-bunch interaction.

36 MATERIALS SCIENCE↗

Activation and residual dose rates in the NSLS-II storage ring

It is well known that components in high energy accelerators may get activated and expose workers during maintenance activities. While the potential for activation is higher in positive ion accelerators due to the prolific production of neutrons, certain regions and components in high energy electron accelerators too can be activated enough to create residual dose rates that require careful attention for ALARA compliance. In this report, the activation and residual dose rates from a few materials are studied from various beam loss scenarios ranging from chronic point losses to intermittent real loss scenarios obtained from the operational parameters of the NSLS-II storage ring. FLUKA Monte Carlo radiation transport code is used to model the geometry, the time profile of the beam losses and score the resulting time evolution of the remnant activity and the residual dose rates.

36 MATERIALS SCIENCE↗

Pinhole Cameras for NSLS-II Storage Ring

The pinhole camera has been a workhorse for measuring electron beam size on the storage ring-based light sources. The NSLS-II storage ring will utilize diffraction limited in vertical plane electron beam in order to achieve unprecedented brightness. The goal of the study described in this paper is to define the resolution of the imaging systems and to optimize the beamline design. Initially, the storage ring will have only three damping wigglers installed, and first commissioning will be performed without the damping wigglers. In the final configuration, up to eight damping wigglers are planned.

36 MATERIALS SCIENCE↗

Assessment of the Heat Load on the NSLS-II Storage Ring Septum Chamber

The NSLS-II pulsed septum will be used for injecting intense flux of electrons into the Storage Ring (SR). The septum vacuum system contains a long vacuum chamber of quite complex shape and tight tolerances for the temperature rise. In this Technical Note we assess maximum amounts of the heat load on the chamber walls from different heat sources present in the chamber’s environment. At the end of this note we draw conclusions on the expected septum heat loads and discuss the ways to protect the chamber from overheating.

36 MATERIALS SCIENCE↗

A Model of the NSLS-II 200 MeV Linac

This paper discusses a model of the NSLS-II injector linac. This model is based on a possible design of the linac and is meant to serve a starting point for simulations of the linac performance and to generate initial conditions for the linac to booster transfer line. Although it is based on a possible design from one vendor, it is not meant to show favoritism toward one vendor or another.

36 MATERIALS SCIENCE↗

Alternative Injection Schemes for the NSLS-II Storage Ring

KEK has been investigating the use of pulsed multipoles for injection the Photon Factory and for KEKB. A pulsed quadrupole magnet was installed in the PF. It worked successfully with the exception that it caused beam envelope oscillations when pulsed. They have subsequently designed a pulsed sextupole for injection. The goal would be to have a null field for the stored beam with no gradient and still have an off axis field for the injected beam. In this document we look at the possibility of using a pulsed sextupole in the NSLS-II Storage Ring for injection.

36 MATERIALS SCIENCE↗

NSLS-II Linac Klystron Filament Failure Analysis

The NSLS-II linear accelerator uses the TH2100A klystron tube. One tube has failed with broken window with less than 8000 hours. The tuning (impedance matching) posts were clearly bent, indicating that this tube had a mismatch at the window that was tuned out at the factory. None of our other tubes arrived like this. It is not clear if this was a contributing factor to the failure. This tube was purchased by BNL and installed after linac commissioning to verify operation. Tube delivered with linac held as spare and re-installed when this tube failed.

42 ENGINEERING↗

Location of the orbit noises at NSLS-II

This report presents a method of locating the sources of the orbit noise around the NSLS storage ring. We collected two sets of data in Oct 2018 and Feb 2019 to crosscheck if the noise spectra are repeatable.

36 MATERIALS SCIENCE↗

Repair and Retuning of 3-m long In-Vacuum Undulator at NSLS-II

A 3.0 m long In-Vacuum Undulator (IVU) is employed at the National Synchrotron Light Source II (NSLS-II) for the Hard X-ray Nanoprobe (HXN) beamline providing structural and X-ray fluorescence imaging with world-leading spatial resolution. On July 1st 2018 a gearbox shaft in the gap drive train assembly sheared due to corrosion fatigue caused by stress due to mechanical misalignment. The device was extracted from the storage ring and measured. The magnetic field measurements detected a degradation of the magnetic performance as well as a localized demagnetization of the magnetic modules of the first 3 upstream periods. This paper describes the mechanical repairs and the magnetic phase shimming optimization implemented to restore the spectral performance of the device.

36 MATERIALS SCIENCE↗