Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NMC cathode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Cracking vs. surface reactivity in high-nickel cathodes for lithium-ion batteries

High-nickel layered oxide cathodes LiNi x Mn y Co z O 2 (NMC) experience microcracks during cycling. This can expose fresh cathode surfaces for parasitic reactions and isolate active cathode material from the conductive electrode matrix, resulting in impedance increase and capacity fade. The commonly held belief attributes microcracks to anisotropic lattice volume changes of primary particles during cycling. Nevertheless, recent reports suggest that certain electrolytes might reduce microcracks in NMC cathodes during deep cycling. This raises a crucial question on the origin of microcracks: do microcracks exacerbate surface stability, or does poor surface stability contribute to microcrack formation? This perspective aims to provide context and expound this “chicken or egg” dilemma. We contend that the consequence of surface reactivity on the cycle life of high-Ni cathodes is more pronounced than that of particle cracking. Here, we hypothesize that particle cracking is more of a symptom of severe surface reactivity rather than a cause of capacity fade.

25 ENERGY STORAGE↗

One-step atmospheric microplasma synthesis of an NMC-type lithium-ion battery cathode

The manufacture of battery cathode materials is the most energy-intensive step in the production of commercial lithium-ion batteries; specifically, the synthesis of the widely used transition metal oxide cathodes can require tens of hours at temperatures exceeding 700 °C. Attempts to limit the reaction time and energy required to form crystalline cathode materials often still include a heating or calcination step. This communication aims to highlight a nascent yet novel synthesis route: a one-step atmospheric microplasma process for synthesizing cathode particles in less than one second. The hollow-tube reactor employed produces crystalline particles measuring 0.1–3 μm in diameter, displays narrow XRD peaks corresponding to the 003, 104, and 101 planes, and exhibits anodic redox behavior at 3.75 V vs. lithium—characteristic of transition-metal oxide cathode materials—all without requiring an additional calcination step.

25 ENERGY STORAGE↗

Modeling Lithium Diffusion in Battery Cathodes Considering Chemo-Mechanically Induced Damage

This talk will present a 3D, continuum-level damage model for simulating Lithium diffusion within generated Li_{x}Ni_{0.5}Mn_{0.3}Co_{0.2} (NMC 532) secondary cathode particles. The primary motivation of the particle-level model is to inform cathode-particle design and determine charging profiles that reduce cathode fracture. The model considers NMC 532 secondary particles containing an agglomeration of anisotropic, randomly oriented grains. The model predicts that secondary-particle fracture is primarily due to non-ideal grain interactions with slight dependence on high-rate charge demands. The model predicts that small secondary-particles with large grains develop significantly less damage than larger secondary particles with small grains. Finally, the model predicts most of the chemo-mechanical damage accumulates in the first high-rate cycles. This chemo-mechanical “damage saturation” effect indicates that initial secondary-particle fracture occurs within the first few cycles, while long-term cathode degradation is not solely chemo-mechanically induced.

47 OTHER INSTRUMENTATION↗

Quantifying the Influence of Charge Rate and Cathode-Particle Architectures on Degradation of Li-Ion Cells Through 3D Continuum-Level Damage Models

In this article, we develop a 3D, continuum-level damage model implemented on statistically generated LiNi 0.5 Mn 0.3 Co 0.2 O (NMC 532) secondary cathode particles. The primary motivation of the particle-level model is to inform cathode-particle design through detailed exploration of the influence of secondary and primary particle sizes on the damage predicted during operation, and determine charging profiles that reduce cathode fracture. The model considers NMC 532 secondary particles containing an agglomeration of anisotropic, randomly oriented grains. These brittle, Ni-based cathodes are prone to mechanical degradation, which reduces overall battery cycle life. The model predicts that secondary-particle fracture is primarily due to non-ideal grain interactions and high-rate charge demands. The model predicts that small secondary-particles with large grains develop significantly less damage than larger secondary particles with small grains. The model predicts most of the chemo-mechanical damage accumulates in the first few cycles. The chemo-mechanical model predicts monotonically increasing capacity fade with cycling and rate. Comparing to experimental results, the model is well suited for capturing initial capacity fade mechanisms, but additional physics is required to capture long-term capacity fade effects.

25 ENERGY STORAGE↗

Improving LiNiO 2 cathode performance through particle design and optimization

We report to enable further development of Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMC, x ≥ 0.9) cathodes for commercial applications, fundamental understanding of the synthesis–property–performance relationships in the LiNiO 2 (LNO) parent phase is essential. In the present study, we report synthesis approaches to produce well-formed, similar-sized single-crystal LiNiO 2 (SC-LNO) with different shapes and dominating surface facets, and reveal the dependence of cathode rate performance and cycling stability on particle morphology and surface. While octahedron-shaped SC-LNO with the (012) surface shows better rate capability and improved ability in utilizing the kinetically slow anodic process in the 3.5 V region, cubic-shaped SC-LNO with the (104) surface delivers superior cycling stability, especially upon cycling at a high upper cutoff voltage of 4.6 V. Improvement in cycling stability is correlated with reduced surface reconstruction and preferential LiF formation through the interaction with the electrolyte on the (104) surface. Our study not only demonstrates the importance of particle morphology and surface design, it also provides key insights into desirable material properties for developing future LNO-based cathode materials with better performance.

25 ENERGY STORAGE↗

Developing rapid electrochemical relithiation protocols for scalable relithiation of lithium-ion battery cathode materials

The recent and ongoing boom in electric vehicle sales has caused the circularity of the supply chain for electric vehicle battery materials to come under a great deal of scrutiny. Innovative recycling processes, or direct recycling, that offer the possibility of reducing the cost of recycling are one possible solution to regaining resources from end-of-life (EoL) electric vehicle batteries. Electrochemically shuttling lithium back into the cathode, or electrochemical relithiation, is a possible technique for restoring lithium content to NMC materials (EoL) in a direct recycling process. This study provides essential understanding towards developing an electrochemical relithiation protocol that will restore lithium loss in intercalation cathode materials that reach EoL by loss of lithium inventory (LLI) as opposed to other degradation mechanisms like loss of active material (LAM), cation mixing or phase transition. Electrochemically aged NMC cathode materials have been prepared and characterized to establish the extent of EoL material structural degradation and lithium loss. A model-informed experimental process is used to identify the optimal electrochemical relithiation protocol to minimize the time taken to relithiate EoL materials and maximize the amount of lithium restored. Protocols were evaluated based on their ability to enable rapid lithium intercalation, maintain structural uniformity in the EoL material and fully restore lithium content. An optimal protocol was identified at elevated temperatures utilizing a novel scanning voltage step.

25 ENERGY STORAGE↗

Fabrication and characterization of high energy density lithium-rich nickel manganese cobalt oxide cathode thin films

This paper reports a method to prepare Li-rich NMC (Li1.2Mn0.55Ni0.15Co0.1O2) thin film cathodes for Li-ion batteries using magnetron sputtering and post-annealing in O2. The use of thin films with no binder and conductive additives enables to study in detail the surface reaction chemistry upon cycling as well as the microstructural changes in the bulk. We show that it is essential to control the deposition pressure to obtain the expected layered(R-3m)-layered(C2/m) structure, thus providing large reversible capacities up to 270 mAh g-1 and voltage profiles close to those expected. This is substantiated by TEM/SAED results showing that the films consist of a layered structure with trigonal symmetry in which Li/TM ordering is achieved. The study of various XPS core levels determines that the surface is comprised of Mn4+, Co3+ and Ni2+ cations inside an O2- framework. The losses mechanisms are studied during long cycling. After 184 cycles, the microstructure does not reveal the presence of Li/TM ordering, which supports that Li2MnO3 conversion is irreversible. In addition, we characterize that the surface chemistry evolves significantly upon cycling. The surface of cycled discharged electrodes is mostly made of inorganic species (LiF, Lix POy Fz , LixPFy), along with small amounts of organic species with C-O and O-C=O groups such as PEO, LiOR and LiCO2R. Moreover, the results support that Ni and Co migrate into the bulk whereas Mn is enriched at the surface. In the case of Mn, the reduction of Mn4+ into Mn3+ is clearly evidenced, as expected from the activation of Li2MnO3 domains.

Baggetto, Loic↗

Understanding Reactivities of Ni-rich Li[NixMnyCo1-x-y]O2 Single-Crystal Cathode Materials

While Ni-rich Li[NixMnyCo1-x-y]O2 (NMC, x ? 0.8) compounds are considered the most promising cathode materials for high-energy lithium-ion batteries (LIBs), a significant challenge is the higher reactivities caused by the increased Ni content, especially under high-voltage operation conditions. In the present study, we synthesize three single-crystal NMC (SC-NMC) samples with the same particle size and morphology: LiNi0.8Mn0.1Co0.1O2 (NMC811), LiNi0.80Mn0.15Co0.05O2 (NMC80155) and LiNi0.85Mn0.10Co0.05O2 (NMC85105). By systematically varying the composition while controlling other properties, the role of each transition metal during air exposure, thermal treatment and long-term cycling is clearly demonstrated. We reveal that while higher Ni content leads to an overall increased reactivities, the presence of Mn provides a stabilizing effect on thermal, structural and chemical properties. In the absence of cycling-induced particle cracking, surface reconstruction is shown to be the dominating contributor to cathode capacity fade. Our study provides key insights needed for the development of better-performing Ni-rich NMC cathode materials.

Kim, Minkyung↗

Controlled lithium stripping enables a stable interface for long-cycling anode-free solid-state batteries

Anode-free solid-state batteries (AFSSBs) are a promising route toward achieving high energy density. In these cells, the anode contains no pre-stored lithium (Li). Instead, the entire Li inventory originates from the cathode and is freshly deposited onto a bare current collector during charging. However, achieving uniform and defect-free Li plating on this bare current collector remains a major challenge, often resulting in low Li plating/stripping efficiency and rapid capacity decay. Here, for the first time, operando neutron imaging is employed to visualize Li plating/stripping behavior in an anode-free full cell with LiNi0.82Mn0.07Co0.11O2 (NMC) as the cathode. Operando measurements reveal that complete stripping of Li leaves isolated Li residues on the current collector, which degrades the interfacial contact between the current collector and the solid-state electrolyte. To mitigate this interfacial issue and promote more uniform Li deposition, we implement a discharge-cutoff-voltage strategy that intentionally retains a thin residual Li layer after stripping. This preserved Li-containing interfacial reservoir not only improves interfacial contact but also serves as an in situ formed seed layer that enables more homogeneous subsequent Li plating. As a result, the optimized anode-free cell with limited stripping depth exhibits excellent long-term cycling stability, maintaining a discharge capacity of 112.1 mAh g−1 with a capacity retention of 80.6% and an average coulombic efficiency of approximately 99.9% after 500 cycles at 0.25 C. In contrast, the cell with a conventional discharge cutoff voltage of 2.8 V exhibits rapid capacity decay, retaining only 59.7 mAh g−1 after 50 cycles with a capacity retention of 40.7%. This work demonstrates that limiting deep stripping to preserve a thin Li-containing interfacial layer can effectively improve the cycling stability of sulfide-based AFSSBs.

Wang, Jiwei [Northeastern University, Boston]↗

Safe, Low-Cost, High Energy-Density, Solid-State Li-Ion Batteries

We developed intrinsically safe, robust, low-cost, high-energy-density solid-state Li-ion batteries, by integrating high conductivity garnet-type solid Li ion electrolytes and several different cathodes in tailored microstructures, fabricated by low-cost supported thin-film ceramic techniques, to overcome the primary technological barriers to next generation battery technology. In this ARPA-E project we employed Li-garnet solid-state electrolytes pioneered by one of the co-investigators (Thangadurai) which has room temperature (RT) conductivity of ~10 -3 S cm -1 . The highly stable garnet SSE allowed the use of S, NMC, and other cathodes with Li metal anodes without stability or flammability concerns. We studied the garnet’s stability when exposed to CO 2 and humidity (with or without an ALD coating) and showed that the material can be processed in ambient air for most steps prior to battery assembly, significantly reducing production costs. We extensively studied and scaled up the synthesis of the powder and explored external suppliers of garnet to determine the best pathway for commercial success. We used low-cost and scalable tapecasting fabrication methods to create porous-dense-porous “trilayer” solid electrolyte microstructures with a ~20 μm separating dense layer, and >70% porosity porous layers to host the electrodes. These scalable multilayer ceramic fabrication techniques, without need for dry rooms or vacuum equipment, also provide for dramatically reduced manufacturing costs. The tailored microstructured electrode supports (scaffold) increased interfacial area ~50x, overcoming the high impedance typical of planar geometry SSLiBs, resulting in record-setting 10 mA/cm 2 lithium cycling in a symmetric cell. We expanded our tapecasting ability and showed tapes >25m in length by the end of the project. We demonstrated the ability to sinter garnet without the use of a garnet powderbed, which could have been a major obstacle and waste of material at scale. At the same time, we expanded the size of our trilayers from coin cells (0.7 cm 2 ) to the full format design (30 cm 2 ). To develop full cells, we demonstrated 250 Wh/kg at room temperature with commercial NMC electrode films in a bilayer configuration. Similarly, we demonstrated 280 Wh/kg trilayer Li-S cells at room temperature with >90% capacity retention over 300 cycles. At 90°C we demonstrated 350 Wh/kg with a Li-S trilayer. The high thermal stability of the garnet electrolyte also enabled extended cycling (400 cycles) of a Li-TiS 2 cell at 150 °C, showcasing the exceptional safety and nonflammability of the solid-state trilayer batteries. Ion Storage Systems has taken this technology and knowledge to produce trilayer garnet electrolytes and is building out facilities to commercialize high performance solid state batteries. ISS has hired a strong staff, identified and communicated with a large number of potential partners, and successfully secured follow-on funding.

25 ENERGY STORAGE↗

In Situ Li Seed Formation Enables Uniform Plating in Anode-Free Solid-State Batteries

Anode-free solid-state batteries (AFSSBs) are a promising route toward achieving high energy density. In these cells, the anode contains no pre-stored lithium (Li). Instead, all Li inventory originates from the cathode and is freshly deposited onto a bare current collector during charging. However, achieving uniform and defect-free Li plating on this bare current collector remains a major challenging, often resulting in low Li plating/stripping efficiency and rapid capacity decay. Here, for the first time, operando neutron imaging is employed to visualize Li plating/stripping behavior in an anode-free full cell with LiNi 0.82 Mn 0.07 Co 0.11 O 2 (NMC) as the cathode. Operando measurements reveal that complete stripping of Li leaves isolated Li residues on the current collector, which degrades interfacial contact between the current collector and solid-state electrolyte. To mitigate this interfacial issue and promote more uniform Li deposition, we implement a discharge cutoff voltage strategy that intentionally retains a thin residual Li layer after stripping. This thin Li layer, serving as an in situ–formed seed layer, not only enables more homogeneous subsequent Li plating but also improves interfacial contact. As a result, the anode-free cell with a controlled discharge voltage of 3.5 V exhibits excellent long-term cycling stability, maintaining a discharge capacity of 116 mAh g -1 with a retention rate of 83.4% and an average Coulombic efficiency of approximately 99.9% after 430 cycles at 0.25 C. In contrast, the cell with a conventional discharge cutoff voltage of 2.8 V exhibits rapid capacity decay, retaining only 59.7 mAh g -1 after 50 cycles with a capacity retention of 40.7%. This work offers a practical strategy to unlock the long-term viability of anode-free solid-state batteries.

25 ENERGY STORAGE↗

Surface Structure, Morphology, and Stability of Li(Ni 1/3 Mn 1/3 Co1/3)O 2 Cathode Material

Layered Li(Ni 1-x-y Mn x Co y )O 2 (NMC) oxides are promising cathode materials capable of addressing some of the challenges associated with next-generation energy storage devices. In particular, improved energy densities, longer cycle-life, and improved safety characteristics with respect to current technologies are needed. However, sufficient knowledge on the atomic-scale processes governing these metrics in working cells is still lacking. Herein, Density Functional Theory (DFT) is employed to predict the stability of several low-index surfaces of Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 (NMC111) as a function of Li and O chemical potentials. Predicted particle shapes are compared with those of single crystal NMCs synthesized under different conditions. The most stable surfaces for stoichiometric NMC111 are predicted to be the non-polar (104), the polar (012) and (001), and the reconstructed, polar (110) surfaces. Results indicate that intermediate spin Co 3+ ions lower the (104) surface energy. Furthermore, it was found that removing oxygen from the (012) surface was easier than from the (104) surface, suggesting a facet dependence on surface-oxygen vacancy formation. In conclusion, these results give important insights into design criteria for the rational control of synthesis parameters as well as establish a foundation on which future, mechanistic studies of NMC surface instabilities can be developed.

25 ENERGY STORAGE↗

Synthesis and electrochemical characterization of Cr-doped lithium-rich Li 1.2 Ni 0.16 Mn 0.56 Co 0.08-x Cr x O 2 cathodes

Lithium-rich layer oxide, Li 1.2 Ni 0.16 Mn 0.56 Co 0.08 O 2 (NMC), is a possible cathode candidate for high-energy density batteries. Issues such as cycling stability, rate performance, and cost are yet to be overcome before successful commercialization of the material. In this work, we report on the synthesis of Cr-doped lithium-rich phases Li 1.2 Ni 0.16 Mn 0.56 Co 0.08-x Cr x O 2 (where x=0.00, 0.01, and 0.02) (NMC-Cr) by the sol-gel technique. Cr is homogeneously distributed in the crystal structure evidence by elemental mapping measurements. The Cr-doped materials exhibit much better cycling stability with 100% capacity retention versus 44% for the undoped sample after 50 cycles. The Cr-doped samples show excellent electrochemical performance at higher C-rate in comparison with the undoped NMC. The latter shows rapid capacity fading from 220 to 50 mAh g ₋1 at the 0.1 to 1C rates, respectively. Moreover, the Cr-containing materials do not show significant signs of voltage fading during cycling owing to the stabilization of the crystal lattice by Cr. The electrochemical impedance spectroscopy measurements also indicate the stable cell resistance on cycling for the Cr-doped phases compared to the undoped phase.Open image in new window

25 ENERGY STORAGE↗

Heterogeneity of the Dominant Causes of Performance Loss in End-of-Life Cathodes and Their Consequences for Direct Recycling

Recycling Li-ion batteries from electric vehicles is critical for reducing costs and supporting the development of a domestic battery supply chain. Direct recycling of cathodes, like LiNixMnyCozO2 (NMC), is attractive due to its low cost, energy use, and emissions compared to traditional recycling techniques. However, a comprehensive understanding of the active material properties at end-of-life is needed to guide direct recycling processes and the performance-dependent reuse applications. Here, NMC material from an end-of-life commercial pouch cell is characterized and bench-marked against pristine non-cycled counterparts with respect to capacity, impedance, crystallography, morphology, and microstructure to identify major degradation modes and understand variability in the end-of-life material. The spatial heterogeneity of each property throughout the cell is also quantified. While the degraded material demonstrated similar capacity as the pristine, its impedance and rate capability are severely diminished. Furthermore, samples from the periphery of the electrode layers showed more severe performance loss compared to samples extracted from central regions. The dominant culprit of performance loss is the material microstructure, where the magnitude of particle cracking showed the strongest correlation to the impedance components that are most unfavorably impacted. This work suggests severe cracks in cathode active materials are the primary challenge that direct recycling methods must overcome.

25 ENERGY STORAGE↗

Insights into Li/Ni ordering and surface reconstruction during synthesis of Ni-rich layered oxides

Nickel-rich layered transition metal oxides (NMCs) have been intensively studied as promising cathode candidates for next-generation Li-ion batteries, known for low cost and high theoretical capacity. However, the practical capacity of NMCs is largely determined by cationic ordering and has yet to be well controlled during synthesis, largely due to the complexity and non-equilibrium nature of the reactions occurring in the sintering process. In this work, high-energy synchrotron X-ray diffraction is employed to investigate the kinetic and thermodynamic aspects of cationic ordering during synthesis of LiNi 0.7 Mn 0.15 Co 0.15 O 2 (NMC71515). It is found that cationic ordering in the bulk is coupled to surface reconstruction during synthesis, occurring concomitantly and both being greatly affected by Li 2 CO 3 decomposition and Li loss at the particle surface. Through tuning the sintering temperature and time, highly ordered NMC71515 with high capacity and excellent rate capability is synthesized. The developed approach may be applied broadly to the synthesis of high-performance Ni-rich NMC and other cathode materials.

25 ENERGY STORAGE↗

Towards the Commercialization of the All-Solid-State Li-ion Battery: Local Bonding Structure and the Reversibility of Sheet-Style Si-PAN Anodes

A slurry-coated sheet-style Si-based anode is developed for use in all-solid-state Li-ion batteries. Inexpensive, mixed-conducting polyacrylonitrile (PAN) is utilized as both binder and conductive additive, enabling Si-rich electrodes (70 wt%) to attain large reversible capacities ~1,500 mAh g-1 (Si) at 1 C rates (>3 mA cm -2 ). Cross sectional analysis of a discharged all-solid-state half-cell indicates that the Si-PAN anode achieves the largest volumetric specific capacity ever reported for a Li-ion electrode (>1500 mAh cm -3 ). Ex situ Raman spectroscopic studies reveal that the anodes' reversibility is attributed to the preservation of small tetrahedrally coordinated clusters within their Si nanoparticles upon discharge. We therefore argue that careful lithiation limitations should be implemented in all Si-based Li-ion anodes to preserve this local tetrahedral atomic structure. Furthermore, the slurry-coated sheet-style Si-PAN anodes have been successfully cycled in all-solid-state full-cells against high-voltage nickel-rich NMC 811 composite cathodes to encourage future commercialization of similar sheet-style all-solid-state designs.

25 ENERGY STORAGE↗