Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multiphase Flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Advective gas flow in bentonite: Development and comparison of enhanced multi-phase numerical approaches

Understanding the impact of repository gas, generated from degradation of waste and its interaction with the host rock, is essential when assessing the performance and safety function of long-term disposal systems for radioactive waste. Numerical models based on conventional multi-phase flow theory have historically been applied to predict the outcome and impact of gas flow on different repository components. However, they remain unable to describe the full complexity of the physical processes observed in water-saturated experiments (e.g., creation of dilatant pathways) and thus, the development of novel representations for their description is required when assessing fully saturated clay-based systems. This was the primary focus of Task A within the international cooperative project DECOVALEX-2019 (D-2019) and refinement of these approaches is the primary focus of this study (Task B in the current phase of DECOVALEX-2023). This paper summarises development of enhanced numerical representations of key processes and compares the performance of each model against high-quality laboratory test data. Experimental data reveals that gas percolation in water-saturated compacted bentonite is characterised by four key features: (i) a quiescence phase, followed by (ii) the gas breakthrough, which leads to a (iii) peak value, which is then followed by (iv) a negative decay. Three models based on the multiphase flow theory have been developed. These models can provide good initial values and reasonable responses for gas breakthrough (although some of them still predict a too-smooth response). Peak gas pressure values are in general reasonably well captured, although maximum radial stress differences are observed at 48 mm from the base of the sample. Here, numerical peak values of 12.8 MPa are predicted, whereas experimental values are about 11 MPa. These models are also capable of providing a reasonable representation of the negative pressure decay following peak pressure. However, other key specific features (such as the timing of gas breakthrough) still require a better representation. The model simulations and their comparison with experimental data show that these models need to be further improved with respect to model parameter calibration, the numerical representation of spatial heterogeneities in material properties and flow localisation, and the upscaling of the related physical processes and parameters. To further understand gas flow localisation, a new conceptual model has been developed, which shows that discrete channels can possibly be induced through the instability of gas-bentonite interface during gas injection, thus providing a new perspective for modeling gas percolation in low-permeability deformable media.

58 GEOSCIENCES↗
DOE OSTI2021

Optimal Wetting Angles in Lattice Boltzmann Simulations of Viscous Fingering

We conduct pore-scale simulations of two-phase flow using the 2D Rothman–Keller colour gradient lattice Boltzmann method to study the effect of wettability on saturation at breakthrough (sweep) when the injected fluid first passes through the right boundary of the model. We performed a suite of 189 simulations in which a “red” fluid is injected at the left side of a 2D porous model that is initially saturated with a “blue” fluid spanning viscosity ratios M=ν r /ν b ∈[0.001,100] and wetting angles θ w ∈[0°,180°]. As expected, at low-viscosity ratios M=ν r /ν b $\ll$1 we observe viscous fingering in which narrow tendrils of the red fluid span the model, and for high-viscosity ratios M$\gg$1, we observe stable displacement. The viscous finger morphology is affected by the wetting angle with a tendency for more rounded fingers when the injected fluid is wetting. However, rather than the expected result of increased saturation with increasing wettability, we observe a complex saturation landscape at breakthrough as a function of viscosity ratio and wetting angle that contains hills and valleys with specific wetting angles at given viscosity ratios that maximize sweep. This unexpected result that sweep does not necessarily increase with wettability has major implications to enhanced oil recovery and suggests that the dynamics of multiphase flow in porous media has a complex relationship with the geometry of the medium and the hydrodynamical parameters.

Engineering↗
DOE OSTI2020

Onset dynamics of air-water menisci on rock fracture surfaces

Information on menisci dynamics and equilibrium contact angles, θ e , is needed for modeling multiphase flow of fluids in geologic formations. The wettability of fracture faces is relevant to applications such as waterflooding in enhanced oil recovery and evaluation of caprock integrity for geologic carbon sequestration. We investigated the vertical capillary rise of air-water menisci on exposed fracture faces for a sandstone, a shale, and three granites. The experimental design approximated that employed in the Wilhelmy plate method. Replicate fracture faces were prepared by fracturing cylindrical rock cores using the Brazilian method and splitting the fractured cores apart along their fracture planes. Meniscus onset was imaged from a cross-sectional perspective using dynamic neutron radiography, and quantified with change point analysis. An existing model for meniscus onset fitted the experimental data very well (median R 2 = 0.96). Capillary rise was typified by t 2/3 scaling (where t is time), followed by a constant equilibrium height, z e . The average time taken for the menisci to reach z e was 0.39 s, with no differences between rock types. The menisci achieved a greater vertical extent on the fracture faces of the sedimentary rocks as compared to those of the granites. Apparent θ e values were calculated from the best fit estimates of z e using the Wilhelmy plate equation for a smooth and planar vertical surface. Despite the fractal roughness of some of the fracture faces, there was a significant linear relationship (R 2 = 0.80) between the apparent θ e values and intrinsic θ e values measured on polished surfaces of the same rocks using the sessile drop method. The regression equation indicated the apparent θ e values were consistently greater than the intrinsic values. This overestimation may be due to averaging of pixels at the air-water-solid interface, a required step in the image analysis. Further exploration of the range of applicability and measurement accuracy of this proposed new technique would be valuable.

58 GEOSCIENCES↗
DOE OSTI2023

Mixed imbibition controls the advance of wetting fluid in multiscale geological media

Imbibition plays a central role during multiphase flows in geological media; yet, our understanding of imbibition dynamics across the multiscale features of rocks, including fractures, microcracks, and heterogeneous matrices is limited. Here, we deployed a unique combination of micro- and clinical X-ray CT imaging to probe directly the spatiotemporal evolution of imbibition in a natural, multiscale shale sample. The method enabled unraveling of mixed imbibition behavior, with spontaneous imbibition rates in the matrix pores and microcracks driven by capillarity proceeding as $\propto t^{-1/2}$, whereas pressure-driven flows in the macroscopic fractures yield apparent imbibition rates with $\propto t^{-1}$ scaling. Regardless of the aperture, we showed that spontaneous imbibition proceeds uniformly away from the fractures. The effects of microcracks are further investigated by comparing the dynamics of the imbibition fronts with and without microcracks. Finally, these results highlight the paramount role of microcracks on anomalous front roughening and the need to account for microcracks appropriately in the development of predictive theoretical models.

58 GEOSCIENCES↗
DOE OSTI2020

A physics-informed operator regression framework for extracting data-driven continuum models

The application of deep learning toward discovery of data-driven models requires careful application of inductive biases to obtain a description of physics which is both accurate and robust. We present here a framework for discovering continuum models from high fidelity molecular simulation data. Our approach applies a neural network parameterization of governing physics in modal space, allowing a characterization of differential operators while providing structure which may be used to impose biases related to symmetry, isotropy, and conservation form. Here, we demonstrate the effectiveness of our framework for a variety of physics, including local and nonlocal diffusion processes and single and multiphase flows. For the flow physics we demonstrate this approach leads to a learned operator that generalizes to system characteristics not included in the training sets, such as variable particle sizes, densities, and concentration.

42 ENGINEERING↗
DOE OSTI2025

From clutter to clarity: Emergent neural operators via questionnaire metrics

Real-world datasets in chemical engineering and bioengineering processes—such as those from catalytic reactors, multiphase flows, polymerization reactors, bioreactors, and clinical trials—can often be unlabeled or disorganized, rendering the training of existing supervised learning models ineffective at learning the underlying dynamics. To salvage these datasets for decision-making, we first seek to obtain clarity from the cluttered data. Here, we present a framework for developing “structural” generative models, discovering emergent equations, and constructing efficient emulators from scrambled datasets by integrating unsupervised organizational learning techniques (Questionnaires) with advanced deep learning architectures (Deep Hidden Physics Models and Deep Operator Networks). Our approach is demonstrated on two illustrative model systems: (a) a 1D advection–diffusion partial differential equation representing a winding underground pipe and (b) an ensemble of Stuart–Landau oscillators, an agent-based system of coupled ordinary differential equations. In both cases, we successfully reconstruct meaningful spatial, temporal, and parameter embeddings from scrambled data, enabling good predictions of system dynamics. As a result, we highlight the framework’s potential for broader applications, enabling data-driven system identification in fields with inherently disorganized or hidden parameter spaces.

42 ENGINEERING↗
DOE OSTI2021

Reduced-order modeling of near-field THMC coupled processes for nuclear waste repositories in shale

Performance assessment (PA) of geologic radioactive waste repositories requires three-dimensional simulation of highly nonlinear, thermo-hydro-mechanical-chemical (THMC), multiphase flow and transport processes across many kilometers and over tens to hundreds of thousands of years. Integrating the effects of a near-field geomechanical process (i.e. buffer swelling) into coupled THC simulations through reduced-order modeling, rather than through fully coupled geomechanics, can reduce the dimensionality of the problem and improve computational efficiency. In this study, PFLOTRAN simulations model a single waste package in a shale host rock repository, where re-saturation of a bentonite buffer causes the buffer to swell and exert stress on a highly fractured disturbed rock zone (DRZ). Three types of stress-dependent permeability functions (exponential, modified cubic, and Two-part Hooke’s law models) are implemented to describe mechanical characteristics of the system. Overall, our modeling study suggests that compressing fractures reduces DRZ permeability, which could influence the rate of radionuclide transport and exchange with corrosive species in host rock groundwater that could accelerate waste package degradation. Less permeable shale host rock delays buffer swelling, consequently retarding DRZ permeability reduction as well as chemical transport within the barrier system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Time-Lapse Gravity Monitoring of CO2 Migration Based on Numerical Modeling of a Faulted Storage Complex

In this study, the performance of both surface and borehole time-lapse gravity monitoring to detect CO2 leakage from a carbon storage site is evaluated. Several hypothetical scenarios of CO2 migration in a leaky fault, and thief zones at different depths at the Kimberlina site (California, USA) constitute the basis of the approach. The CO2 displacement is simulated using the TOUGH2 simulator applied to a detailed geological model of the site. The gravity responses to these CO2 plumes are simulated using forward modeling with sensors at ground surface and in vertical boreholes. Results of inversion on one scenario are also presented. The surface-based gravity responses obtained for the different leakage scenarios demonstrate that leakage can be detected at the surface in all the scenarios but the time to detection is highly variable (10 to 40 years) and dependent on the detection threshold considered. Borehole measurements of the vertical component of gravity provide excellent constrains in depth when they are located in proximity of the density anomaly associated with the presence of CO2, thus discriminating multiple leaks in different thief zones. Joint inversion of surface and borehole data can bring valuable information of the occurrence of leakages and their importance by providing a reasonable estimate of mass of displaced fluids. This study demonstrates the importance of combining multiphase flow simulations with gravity modeling in order to define if and when gravity monitoring would be applicable at a given storage site.

Time-lapse gravity monitoring, leak detection, CCS↗
DOE OSTI2026

Reservoir-scale model of geologic hydrogen production from serpentinization: Cyclic injection in a dual-permeability fracture-matrix system

Geologic hydrogen (GeoH 2 ) from serpentinization is a promising low-carbon resource, but its reservoir-scale behavior remains poorly understood. We develop a dual-permeability reactive transport model for an injector–producer well pair in ultramafic rock that couples multiphase flow, heat transfer, geochemistry, and porosity–permeability evolution. Here, the model is calibrated to olivine flow-through experiments and upscaled to two-year long simulations with continuous injection and cyclic injection with shut-in-to-injection ratios (SIR = 1, 0.5, 0.1). Olivine reacts along high-flux pathways to form lizardite and magnetite, increasing pH; H 2 (aq) and H 2 (g) peak early and then decline as exsolution and advective export outpace local generation. Continuous injection yields the highest cumulative H 2 but the lowest water-use efficiency (1.138 x 10 –6 mol/kgw). Cyclic injection increases this ratio to 1.35 x 10 –6 , 1.377 x 10 –6 , and 1.182 x 10 –6 mol/kgw for SIR = 1, 0.5, and 0.1, respectively; SIR = 0.5 provides a ~20% improvement over continuous injection and the best compromise for pilot design.

08 HYDROGEN↗
DOE OSTI2022

Experimentally validated high-fidelity simulations of a liquid jet in supersonic crossflow

Here, utilizing recent advancements in computational schemes for compressible, multiphase flows, this work features a parametric study of a pure liquid jet in supersonic crossflow that involves simulating the atomization process for four values of momentum-flux ratio. These simulations are validated against experimental results measured with high-speed X-ray imaging, which confirm the accuracy of the numerical approach. Also, the effect of numerical resolution on some flow behavior is investigated, revealing convergence of the jet shape and surface instability wavelength. Analysis of the resulting sprays includes statistical descriptions of the liquid distribution, liquid structures created through breakup, interfacial instabilities, and dominant flow features. As the flowrate increases, the spray penetrates further, it becomes more disperse, and less liquid impacts the wall, but the droplet size distribution changes little. The wavelength of instabilities on the windward side of the jet diverges from measured trends in subsonic crossflows. In a visualization of the time-averaged flow, counter-rotating vortices are observed along the jet core and in the wake, affecting the process of primary atomization and early droplet trajectories.

42 ENGINEERING↗
DOE OSTI2023

A numerical study of an atomizing jet in a resonant acoustic field

By applying state-of-the-art, high-fidelity methods for compressible multiphase flows, this work features a parametric study of a turbulent liquid jet atomizing under the influence of standing acoustic waves with five different amplitude values. We perform these simulations in a semi-periodic domain to isolate interactions between acoustic and atomization processes and to emulate a pure liquid fuel spray placed at the pressure node of a resonant acoustic field. Characterization of the flow includes measurements of the mean dimensions, droplet number, and surface area of the liquid distribution, alongside qualitative depictions of the interface evolution, breakup events, and hydrodynamic fields. As acoustic forcing is provided to the flow, the added energy provokes atomization when shear would otherwise be insufficient for breakup. The magnitude of the forcing determines the rate of droplet production, which accelerates as the evolving liquid surface modifies the induced motion of the gas phase. At the nodal plane, the acoustic field produces an organizing effect on the liquid structures.

42 ENGINEERING↗
DOE OSTI2026

Latent space dynamics identification for interface tracking with application to shock-induced pore collapse

Capturing sharp, evolving interfaces remains a central challenge in reduced-order modeling, especially when data is limited and the system exhibits localized nonlinearities or discontinuities. Here, we propose LaSDI-IT (Latent Space Dynamics Identification for Interface Tracking), a data-driven framework that combines low-dimensional latent dynamics learning with explicit interface-aware encoding to enable accurate and efficient modeling of physical systems involving moving material boundaries. At the core of LaSDI-IT is a revised autoencoder architecture that jointly reconstructs the physical field and an indicator function representing material regions or phases, allowing the model to track complex interface evolution without requiring detailed physical models or mesh adaptation. The latent dynamics are learned through linear regression in the encoded space and generalized across parameter regimes using Gaussian process interpolation with greedy sampling. We demonstrate LaSDI-IT on the problem of shock-induced pore collapse in high explosives, a process characterized by sharp temperature gradients and dynamically deforming pore geometries. The method achieves relative prediction errors below 9% across the parameter space, accurately recovers key quantities of interest such as pore area and hot spot formation, and matches the performance of dense training with only half the data. This latent dynamics prediction was 10 6 times faster than the conventional high-fidelity simulation, proving its utility for multi-query applications. These results highlight LaSDI-IT as a general, data-efficient framework for modeling discontinuity-rich systems in computational physics, with potential applications in multiphase flows, fracture mechanics, and phase change problems.

Gaussian process↗
DOE OSTI2020

An experimental system and procedure of unsteady-state relative permeability test for gas hydrate-bearing sediments

Reliable estimations of the relative permeability of gas and water in hydrate-bearing sediments (HBS) and the dependency of the relative permeability on hydrate saturation are critical to predict the productivity of a hydrate reservoir. Yet, this remains poorly estimated owing to lack of experimental data associated with difficulties in conducting multiphase flow experiments in HBS. Recognizing the experimental challenges, this study intends to develop and validate a new experimental system and procedure of unsteady-state relative permeability test that can generate reliable and reproducible flow measurements in HBS. Furthermore, gas hydrate is considered as a part of solid matrix in the sediment, so one of the challenges is to maintain a constant hydrate saturation, which is achieved in this experimental study using tight pressure-temperature (P-T) control near the hydrate stability boundary. The measured differential pressure across the specimen, methane injection flow rate, and volume of displaced brine are used to calculate the relative permeability by adopting a conventional Buckley-Leverett theory-based interpretation method. Residual brine saturation calculated for the hydrate-bearing specimen is higher than that of hydrate-free specimen, presumably due to decrease in pore size, increase in heterogeneity of solid matrix, and increase in size distribution of solid matrix and pore in the presence of hydrates. Further studies are necessary to represent the results of the unsteady-state flow experiment in HBS with a gas hydrate-dependent relative permeability model.

03 NATURAL GAS↗
DOE OSTI2021

SiOC coatings on yttria stabilized zirconia microspheres using a fluidized bed coating process

In this study, defect-free SiOC coatings were prepared on yttria stabilized zirconia (YSZ) microspheres by a fluidized bed coating process. Effects of the rheological properties of the coating solution on the coating process were elucidated. An impact regime diagram was constructed, which demonstrated that the coating mechanisms were collision/impact. During the fluidized bed coating, longer spouted time resulted in wider dispersion, longer residence time, and more circulatory motion of particles; the fluid distributed more uniformly throughout the column, as demonstrated in our Multiphase Flow with Interface eXchange (MFiX) simulations. Two-step pyrolysis in Ar achieved complete coating layers, which were comprised of SiOC, SiO 2 , SiC, and graphite. The two stage mass loss during the pyrolysis corresponded to simultaneous reactions due to depolymerization and hydrocarbon loss from 400 to 600°C. Carbon cluster size in the pyrolyzed samples was calculated to be 25 ± 2 Å. In conclusion, this work provides a new method for producing SiOC coatings on micron spheres, with nuclear TRISO fuel particles as the application.

42 ENGINEERING↗
DOE OSTI2022

Clustering of inertial particles in turbulent flow through a porous unit cell

We report direct numerical simulation is used to investigate effects of turbulent flow in the confined geometry of a face-centred cubic porous unit cell on the transport, clustering and deposition of fine particles at different Stokes numbers (St = 0.01, 0.1, 0.5, 1, 2) and at a pore Reynolds number of 500. Particles are advanced using one-way coupling and the collision of particles with pore walls is modelled as perfectly elastic with specular reflection. Tools for studying inertial particle dynamics and clustering developed for homogeneous flows are adapted to take into account the embedded, curved geometry of the pore walls. The pattern and dynamics of clustering are investigated using the volume change of Voronoi tesselation in time to analyse the divergence and convergence of the particles. Similar to the case of homogeneous, isotropic turbulence, the cluster formation is present at large volumes, while cluster destruction is prominent at small volumes and these effects are amplified with the Stokes number. However, unlike homogeneous, isotropic turbulence, the formation of a large number of very small volumes was observed at all Stokes numbers and attributed to the collision of particles with the pore wall. Multiscale wavelet analysis of the particle number density indicates that the peak of the energy density spectrum, representative of enhanced particle clustering, shifts towards larger scales with an increase in the Stokes number. Scale-dependent skewness and flatness quantify the intermittent void and cluster distribution, with cluster formation observed at small scales for all Stokes numbers, and void regions at large scales for large Stokes numbers.

42 ENGINEERING↗
DOE OSTI2025

Reactive Transport Modeling of Hydrogen Production from Serpentinization of Olivine

Hydrogen production from serpentinization of ultramafic rocks represents a promising natural pathway for generating carbon-free energy, yet its kinetics and controlling factors remain incompletely understood. A key challenge in advancing serpentinization research lies in the heterogeneity of porosity and permeability in rocks, which leads to nonuniform fluid velocity fields, as well as uncertainties in estimating reactive surface area and identifying appropriate mineral reaction equilibria. Additional complexities arise from the role of dissolved SiO 2 , Fe 2+ /Fe 3+ partitioning, and the limited effect of pH variations within the strongly alkaline regime on hydrogen yields. These challenges hinder straightforward extrapolation from laboratory tests to practical applications of hydrogen production from natural rocks. Here, in this work, we address these questions using a simulation-based reactive transport modeling framework calibrated against controlled laboratory experiments reported elsewhere. The model couples geochemical kinetics, multiphase flow, and mineralogical feedbacks, enabling systematic evaluation of how surface area, dissolved silica concentration, Fe redox state, temperature, and pressure govern serpentinization and H2 generation. We find that surface area exerts the strongest control on reaction rates and hydrogen yields, while Fe 2+ /Fe 3+ ratios act as secondary modulators. Elevated dissolved silica concentrations suppress hydrogen production but accelerate serpentine precipitation, whereas increasing pH beyond 12 within the strongly alkaline regime produces only marginal gains. Finally, we demonstrate that integrating targeted experiments with calibrated simulations offers a powerful and efficient approach for predicting hydrogen yields and assessing parameter trade-offs in industrial-scale applications. This integration can substantially reduce the experimental burden while improving predictive capability, thereby enhancing both the mechanistic understanding and the practical feasibility of hydrogen production from serpentinization.

08 HYDROGEN↗
DOE OSTI2021

Methane Hydrate Formation and Evolution During Sedimentation

We explored methane hydrate formation with sedimentation with a newly developed one-dimensional, multiphase flow, multicomponent transport numerical model. Our model couples methane hydrate formation from in situ microbial methane generation within the hydrate stability zone (HSZ), methane recycling, and microbial methane generation below the base of the hydrate stability zone (BHSZ). Both recycled methane and deeply generated methane are transported into the HSZ by buoyancy-driven free gas flow. Free gas flows through the HSZ by both the processes of capillary-dependent pore fillings and by salt exclusion during hydrate formation, with the former being the dominant mechanism. We quantitively illustrated the formation of enriched hydrate in muddy sediments above, and interconnected free gas below, the BHSZ, which are common features along the world's continental margin. In addition, we showed two ways to form concentrated methane hydrate above the BHSZ. The first mechanism is local free gas flow during methane recycling. This happens at sites with sufficient methane generation above the BHSZ. The second mechanism is deep microbial methane generation which is transported into the HSZ by free gas flow. This mechanism plays a more important role at sites with high sedimentation rates. This study provides new insights into methane hydrate formation and distribution below the seafloor. It is important for understanding the carbon cycle and carbon storage below the seafloor and for resource evaluation and exploitation.

58 GEOSCIENCES↗
DOE OSTI2024

Quantifying the Effect of Pore‐Size Dependent Wettability on Relative Permeability Using Capillary Bundle Model

Abstract Relative permeability is a key parameter for characterizing the multiphase flow dynamics in porous media at macroscopic scale while it can be significantly impacted by wettability. Recently, it has been reported in microfluidic experiments that wettability is dependent on the pore size (Van Rooijen et al., 2022). To investigate the effect of pore‐size‐dependent wettability on relative permeability, we propose a theoretical framework informed by digital core samples to quantify the deviation of relative permeability curves due to wettability change. We find that the significance of impact is highly dependent on two factors: (i) the function between contact angle and pore size (ii) overall pore size distribution. Under linear function, this impact can be significant for tight porous media with a maximum deviation of 1,000%.

Yu, Siqin↗