Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Methanol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst for enhanced CO 2 -methanol conversion at low temperature and pressure

Cu-ZnO-Al 2 O 3 is the most widely applied catalyst for CO 2 hydrogenation to methanol. However, it is still a challenge to produce methanol using this catalyst under low-temperature (<250 °C) and low-pressure (<10 bar) conditions with desirable yield and selectivity. In this work, by tuning the experimental processing parameters such as solvent, loading amount, and annealing temperature, highly improved ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalysts have been successfully demonstrated. Here, by using organic solvent (N,N-dimethylformamide (DMF), acetone, or isopropanol) for dip-coating loading process instead of deionized (DI) water, Cu-ZnO-Al 2 O 3 nanocatalysts was comparatively better dispersed on the nanorod array support with populated and abundant active sites, thus enhancing the methanol yield. With the control of the loading amount and annealing temperature, finely distributed Cu nanoparticles were obtained on the ZnO nanorod surfaces to enhance the interactions between Cu and ZnO nanorod surfaces. Further improvement of the catalyst performance is demonstrated by tuning the reaction space velocity. At 200 °C and 10 bar conditions, the optimized catalyst achieved a methanol yield of 6.46 mol h –1 kg –1 with 100 % selectivity. The good stability after prolonged testing of the catalysts demonstrates the potential practical implementation. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the 1 bar reveal that the CO 2 hydrogenation to methanol on the ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst follows the CO reaction pathway, due to the surface oxygen vacancies on ZnO nanorods which facilitate CO 2 dissociation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Selective activation of methane C–H bond in the presence of methanol

Direct methane to methanol (MTM) conversion over heterogeneous catalysts is a promising route for valorization of methane. The methane C-H bond activation is considered as the key step of the MTM and is the focus of considerable research activity. However, the formed methanol typically suffers from overoxidation largely due to the cleavage of a methanol C-H bond, whose bond dissociation energy is ca. 0.5 eV lower than that of the methane C-H bond, which usually translates to a transition state energy of the methanol C-H bond cleavage that is ca. 0.55 eV lower than that of methane whenever the reactions proceed through a radical mechanism. Furthermore, we propose a general approach for decreasing the transition state energy difference between the CH 4 and CH 3 OH C-H bond dissociation. When a metal-oxide supported cationic transition metal atom and a neighboring oxygen on the oxide surface serve as the active site, the transition state energy difference through a surface-stabilized pathway can be noticeably narrowed as compared with that of a radical pathway. For Ir, Pt and Rh-doped anatase TiO 2 (101), the CH 4 C-H bond activation can be preferred over that of CH 3 OH at significant methanol mole fraction. Also, for PdAu alloys containing adsorbed oxygen and positively charged Pd, calculations suggest in agreement with recent experiments (Science 367 (6474), 193-197) that the CH 4 C-H bond can be selectively activated in the presence of CH 3 OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Copper(II) imidazolate frameworks as highly efficient photocatalysts for reduction of CO{sub 2} into methanol under visible light irradiation

Three copper(II) imidazolate frameworks were synthesized by a hydrothermal (or precipitation) reaction. The catalysts were characterized by X-ray diffraction (XRD), nitrogen adsorption, transmission electron microscopy (TEM), ultraviolet–visible spectroscopy (UV–vis), Fourier transform infrared spectra (FTIR), thermogravimetry (TG). Meanwhile, the photocatalytic activities of the samples for reduction of CO{sub 2} into methanol and degradation of methylene blue (MB) under visible light irradiation were also investigated. The results show that the as-prepared samples exhibit better photocatalytic activities for the reduction of carbon dioxide into methanol with water and degradation of MB under visible light irradiation. The orthorhombic copper(II) imidazolate frameworks with a band gap of 2.49 eV and green (G) color has the best photocatalytic activity for reduction of CO{sub 2} into methanol, 1712.7 μmol/g over 5 h, which is about three times as large as that of monoclinic copper(II) imidazolate frameworks with a band gap 2.70 eV and blue (J) color. The degradation kinetics of MB over three photocatalysts fitted well to the apparent first-order rate equation and the apparent rate constants for the degradation of MB over G, J and P (with pink color) are 0.0038, 0.0013 and 0.0016 min{sup −1}, respectively. The synergistic effects of smallest band gap and orthorhombic crystal phase structure are the critical factors for the better photocatalytic activities of G. Moreover, three frameworks can also be stable up to 250 °C. The investigation of Cu-based zeolitic imidazolate frameworks maybe provide a design strategy for a new class of photocatalysts applied in degradation of contaminations, reduction of CO{sub 2}, and even water splitting into hydrogen and oxygen under visible light. - Graphical abstract: Carbon dioxide was reduced into methanol with water over copper(II) imidazolate frameworks under visible light irradiation. - Highlights: • Three copper(II) imidazolate frameworks were first applied in the photo-reduction of CO{sub 2}. • The photocatalytic activities of the frameworks depend on their band gap and phase structures. • The photocatalytic activity of orthorhombic frameworks is 3 times that of monoclinic frameworks. • The degradation kinetics of MB over three photocatalysts followed the first-order rate equation. • The largest yield for reduction of CO{sub 2} into methanol on green framworks was 1712.7 μmol/g over 5 h.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transformations of lead 1,3-propylenediaminetetraacetate to its MOF products for the selective adsorption of methanol

Water soluble coordination polymer of potassium lead 1,3-propylenediaminetetraacetate {K_4[Pb_2(1,3-pdta)_2]·6H_2O}{sub n} (1) and its insoluble products {[Pb(1,3-H_2pdta)(H_2O)]·2H_2O}{sub n} (2), {[Pb_2(1,3-pdta)(H_2O)_4]·4H_2O}{sub n} (3) and [Pb{sub 2}(1,3-pdta)(H{sub 2}O){sub 2}]{sub n} (4) were obtained from the direct reactions of lead nitrate with 1,3-propylenediaminetetraacetic acid in different conditions (1,3-H{sub 4}pdta=1,3-propylenediaminetetraacetic acid). The former 1 could be converted to the insoluble products of {[Pb_2(1,3-pdta)(H_2O)_4]·4H_2O}{sub n} (3) and [Pb{sub 2}(1,3-pdta)(H{sub 2}O){sub 2}]{sub n} (4) in weak acidic solution. The complexes have been full characterized by EA, FT-IR, solution and solid state {sup 13}C NMR spectra, thermogravimetric and structural analyses. Interestingly, 3 contains a unique (H{sub 2}O){sub 26} cluster and a 5.2 Å pore after eliminating the guest water molecules, which exhibits reversible adsorption for methanol. This is confirmed by PXRD and solid state {sup 13}C NMR analyses. Nano-confined methanol in microporous structure has been observed based on the large downfield shift of {sup 13}C NMR signal (Δδ 9.72 ppm), attributing to the methyl group in methanol. - Graphical abstract: Water soluble coordination polymer K{sub 4n}[Pb{sub 2}(1,3-pdta){sub 2}]{sub n}·6nH{sub 2}O (1) is converted to its insoluble product [Pb{sub 2}(1,3-pdta)(H{sub 2}O){sub 4}]{sub n}·4nH{sub 2}O (3), which contains a unique (H{sub 2}O){sub 26} cluster and exhibits reversible adsorption for methanol. - Highlights: • Water-soluble coordination polymer was constructed by lead propylenediaminetetraacetate. • Its MOF product has a unique (H{sub 2}O){sub 26} cluster. • The product exhibits reversible adsorption for methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic decomposition of gaseous methanol over anodized iron oxide nanotube arrays in high vacuum

Highlights: • Gas phase photocatalysis over iron oxide nanotube arrays (FNAs) was investigated. • Photocatalytic methanol oxidation in high vacuum was monitored in real time. • Pt-loaded FNAs showed visible light responsive photocatalysis. • Methanol decomposition and successive proton reduction led to hydrogen production. • Differences in photocatalysis between in liquid and in high vacuum are suggesigh vacuum are suggested. - Abstract: Real-time monitoring of photocatalytic methanol decomposition over anodized iron oxide nanotube arrays (FNAs) in high vacuum was performed. Switching phenomena in the partial pressures of H{sub 2}, CO and H{sub 2}O were observed simultaneously according to the ON/OFF sequence of visible and ultraviolet light illuminations over Pt-loaded FNAs prepared with photodeposition, while no change in these gas species appeared for bare FNAs and iron foils. The absence of formaldehyde (CH{sub 2}O) in the intermediates during methanol photodecomposition suggests that Pt-loaded FNAs can possibly work as a catalyst for oxidation of CH{sub 2}O. The photoreforming of methanol to hydrogen without any external bias in Pt-loaded FNAs presumably indicate some differences in photocatalytic reaction mechanisms between in liquid and in high vacuum. The dependence of the Pt photodepositon time on gas phase photocatalysis suggests that the selective deposition of Pt cocatalyst particles on the aperture parts of the nanotubes is necessary for efficient gas phase photoreforming.

08 HYDROGEN↗

Reliable hydrogen production from methanol photolysis in aqueous solution by a harmony between In and Zn in bimetallic zinc indium sulfide

Highlights: • Band-gaps in Zn{sub x}In{sub y}S{sub z} particles were shorten. • Hydrogen production by methanol photolysis was the best on ZnInS{sub 2.5}. • Recombination between electrons and holes during methanol photolysis became long on ZnInS{sub 2.5}. - Abstract: This study focuses on hydrogen production by methanol photolysis using zinc indium sulfide (Zn{sub x}In{sub y}S{sub z}). The X-ray diffraction identified that the synthesized Zn{sub 2}InS{sub 2.5} and ZnInS{sub 2.5} particles have a hexagonal Zn{sub 3}In{sub 2}S{sub 6} structure, but when In of twice amount against Zn is coexisted, the particle exhibits a perfect hexagonal ZnIn{sub 2}S{sub 4} structure. The results in ultra-violet absorption and X-ray photoelectron spectroscopy analysis confirmed that the band-gaps of Zn{sub x}In{sub y}S{sub z} particles decrease depend on the coexistence of In. However, the photocurrent which related to the life time of excited electrons was no correlation with the Zn/In molar ratio, and it was the highest on ZnInS{sub 2.5} particle with a ratio of Zn:In = 1:1. Eventually, the hydrogen production by methanol photolysis in aqueous solution was the best on ZnInS{sub 2.5} particle. This result gives ultimately relevant that the recombination between electrons and holes during methanol photolysis could be suppressed on bimetallic ZnInS{sub 2.5} particle.

36 MATERIALS SCIENCE↗

Piezo-electrocatalytic oxidation of methanol with UV-ozone treated wurtzite zinc oxide nanostructures

Leveraging mechanically-induced piezoelectric polarization, piezocatalysis emerges as a viable mechanism for enhancing the efficiency of catalytic processes. Nanostructured, catalytically active, rationally designed piezoelectric semiconductors can achieve high-performance catalysts for various applications using cost-effective electrocatalytic pathways, such as mechanical stimuli. We design and demonstrate for the first time a cost-effective, high-performance piezo-electrocatalyst for anodic methanol oxidation, which is crucial for the practical application and deployment of direct methanol fuel cells in a variety of emerging clean energy technologies. We synthesized wurtzite ZnO nanorods and nanosheets treated with UV-O 3 to characterize and compare their efficacy for piezo-electrocatalytic methanol oxidation. The generation of piezoelectric polarization charges in nanostructured semiconducting ZnO catalysts significantly increased their electrocatalytic performance. By elucidating the charge transfer between mechanically-deformed ZnO nanostructures and methanol molecules, we identified the underlying mechanism for the piezo-electrocatalytic process for methanol oxidation. The facile synthesis of high-quality ZnO nanostructures enables low-cost, scalable manufacture and direct integration into electrocatalysts whose performance could be enhanced by harvesting mechanical energy that would otherwise be wasted in the working environment.

30 DIRECT ENERGY CONVERSION↗

Biological conversion of methane to methanol at high H 2 S concentrations with an H 2 S-tolerant methanotrophic consortium

To develop biological biogas to methanol conversion technology without costly hydrogen sulfide (H 2 S) removal, a high H 2 S tolerant methanotrophic consortium (HTMC), was enriched from an anaerobic digester effluent in presence of 5.64 g/m 3 H 2 S in the gas phase. The HTMC can grow stably and produce methanol under conditions with CH 4 /air mixtures containing 5.64 g/m 3 of H 2 S. There is no significant (p>0.05) difference in cell yield or CH 4 to methanol conversion efficiency between trials with different H 2 S concentrations from 0 g/m 3 to 5.64 g/m 3 . Further, under optimal conditions, a cell yield of 0.333 g cells/g CH 4 , a methanol concentration of 0.28 mg/mL, and a CH 4 to methanol conversion efficiency of 0.22 mol/mol were obtained, respectively. Besides methanotrophs (14.85%) and other bacteria, Cyanobacteria were also identified in the HTMC with a high abundancy (32.16%), which could broaden the application of HTMC for simultaneous utilization of CH 4 and CO 2 from raw biogas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Technoeconomic Analysis of Microwave-Assisted Dry Reforming Integrated with Chemical Looping for Production of Methanol

Methanol is a key component in producing formaldehyde, acetic acid, and methyl tert -butyl ether (MTBE) and supports a wide array of industries, including plastics, textiles, and automotive. It also plays a growing role in renewable energy solutions. However, the conventional production of methanol involves steam reforming of methane, which is very energy-intensive and produces significant quantities of the greenhouse gas carbon dioxide. In this research, a chemical looping scheme is combined with dry reforming of natural gas in a novel microwave reactor to produce an industrial quantity of methanol. A heat exchanger network is developed to substantially reduce hot and cold utility usage. The effect of the cost of purchasing carbon dioxide from an external source for dry reforming, the capital cost of the microwave reactor, and the cost of electricity on the net present value is analyzed. Technoeconomic comparison with the conventional industrial process that produces methanol via steam reforming of methane indicates that the chemical looping generates a significant positive net present value along with a substantial reduction in carbon dioxide emissions while producing methanol significantly below the U.S. Department of Energy’s goal of $800/ton.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenation of CO 2 to Methanol on a Au δ+ –In 2 O 3–x Catalyst

CO 2 hydrogenation to methanol has attracted increasing attention with the development of renewable hydrogen. A big challenge is to identify catalysts able to achieve high conversion and selectivity. In this work, we report an In 2 O 3 -supported Au catalyst that exhibits excellent performance for hydrogenation of CO 2 selectively to methanol. In situ characterizations using time-resolved X-ray diffraction, ambient-pressure X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy confirm that a strong metal–support interaction leads to a reactive Au δ+ –In 2 O 3– x interface for activation and hydrogenation of CO 2 to methanol. An effective gold-indium oxide bonding favors the dispersion of the noble metal and prevents its sintering under reaction conditions. The methanol selectivity reaches 100% at temperatures below 225 °C and is more than 70% at 275 °C over the Au δ+ –In 2 O 3– x catalyst. It is even 67.8% with a space time yield of methanol of 0.47 g MeOH /(h·g cat ) at 300 °C, 5 MPa, and 21,000 cm 3 h –1 g cat –1 . The results obtained here represent the highest selectivity and activity ever reported for CO 2 hydrogenation over supported gold catalysts. Our study shows that the strong Au/In 2 O 3 interaction and the intrinsic chemical activity of In 2 O 3 can be used to significantly improve the catalytic performance of Au catalysts, providing promising routes for the rational design and application of Au catalysts beyond CO 2 hydrogenation.

36 MATERIALS SCIENCE↗

Dynamic Features of Cu-Ceria Interface under CO 2 Hydrogenation to Methanol

It is generally accepted that metal–support interaction is very important for the hydrogenation of CO 2 to methanol, but little has been revealed about the feature of interfacial active sites under real reaction conditions since there are only limited techniques that can be applied under high-pressure conditions. Here, in this work, by combining multiple in situ and operando techniques on a model Cu/ceria catalyst, we have tracked Cu and ceria sites for methanol formation. Under the reaction condition, it is found that upon reaching the reaction temperature, oxidized Cu species in the as-synthesized catalyst immediately change into metallic Cu species. Following this, it is the gradual formation of methanol, the changing rate of which coincides with the formation of a unique Ce 3+ species. The combined experimental results and density functional theory (DFT) calculations have determined that the formed Ce 3+ sites driven by the reaction conditions are bound to hydrides, adsorbed carbonate species, and interfacial active Cu sites. The Cu-ceria interaction in this complex moiety is weak and can be easily disturbed with reaction environment variations, leading to dynamic changes at the interface upon the hydrogenation of active carbonate intermediates, which are precursors for the formation of methanol. The formation of this unique Cu–Ce 3+ interface and its dynamicity lead to an increase of methanol selectivity from less than 20% to 60%. These results suggest that reactant-derived species (H – and carbonate in this work) can be essential components of the active center with the functions of manipulating the metal−oxide interaction and directing reaction pathways.

CO2 hydrogenation to methanol↗

Structure Sensitivity of Methanol Electrooxidation on Transition Metals

We have investigated the structure sensitivity of methanol electrooxidation on eight transition metals (Au, Ag, Cu, Pt, Pd, Ir, Rh, and Ni) using periodic, self-consistent density functional theory (DFTGGA). Using the adsorption energies of 16 intermediates on two different facets of these eight face-centeredcubic transition metals, combined with a simple electrochemical model, we address the differences in the reaction mechanism between the (111) and (100) facets of these metals. We investigate two separate mechanisms for methanol electrooxidation: one going through a CO* intermediate (the indirect pathway) and another that oxidizes methanol directly to CO2 without CO* as an intermediate (the direct pathway). A comparison of our results for the (111) and (100) surfaces explains the origin of methanol electrooxidation’s experimentally-established structure sensitivity on Pt surfaces. For most metals studied, on both the (111) and (100) facets, we predict that the indirect mechanism has a higher onset potential than the direct mechanism. Ni(111), Au(100), and Au(111) are the cases where the direct and indirect mechanisms have the same onset potential. For the direct mechanism, Rh, Ir, and Ni show a lower onset potential on the (111) facet, whereas Pt, Cu, Ag, and Au possess lower onset potential on the (100) facet. Pd(100) and Pd(111) have the same onset potential for the direct mechanism. These results can be rationalized by the stronger binding energy of adsorbates on the (100) facet versus the (111) facet. Using linear scaling relations, we establish reactivity descriptors for the (100) surface similar to those recently developed for the (111) surface; the free energies of adsorbed CO* and OH* can describe methanol electrooxidation trends on various metal surfaces reasonably well.

10 SYNTHETIC FUELS↗

The conversion of CO 2 to methanol on orthorhombic β-Mo 2 C and Cu/β-Mo 2 C catalysts: Mechanism for admetal induced change in the selectivity and activity

Here, the conversion of CO 2 into methanol catalyzed by β-Mo 2 C and Cu/β-Mo 2 C surfaces has been investigated by means of a combined experimental and theoretical study. Experiments have shown the direct activation and dissociation of the CO 2 molecule on bare β-Mo 2 C, whereas on Cu/β-Mo 2 C, CO 2 must be assisted by hydrogen for its conversion. Methane and CO are the main products on the clean surface and methanol production is lower. However, the deposition of Cu clusters avoids methane formation and increases methanol production even above that corresponding to a model of the technical catalyst. DFT calculations on surface models of both possible C- and Mo-terminations corroborate the experimental observations. Calculations for the clean Mo-terminated surface reveal the existence of two possible routes for methane production (C + 4H → CH 4 ; CH 3 O + 3H → CH 4 + H 2 O) which are competitive with methanol synthesis, displaying slightly lower energy barriers. On the other hand, a model for Cu deposited clusters on the Mo-terminated surface points towards a new route for methanol and CO production avoiding methane formation. The new route is a direct consequence of the generation of a Mo 2 C–Cu interface. The present experimental and theoretical results entail the interesting catalytic properties of Mo 2 C as an active support of metallic nanoparticles, and also illustrate how the deposition of a metal can drastically change the activity and selectivity of a carbide substrate for CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism of methanol synthesis on Ni(110)

Planewave density functional theory (DFT-PW91) calculations are employed to study the methanol synthesis through CO 2 and CO hydrogenation, as well as the two side reactions: the water gas shift (WGS) reaction and formic acid formation, on Ni(110). For the WGS reaction on Ni(110), we find that the redox mechanism is favored over the carboxyl-mediated mechanism. We show that the formate pathway is the dominant one for formic acid formation. For methanol synthesis through CO 2 and CO hydrogenation on Ni(110), our results reveal that the formic-acid- and dioxymethylene-mediated pathways coexist, in contrast to methanol synthesis on Cu(111) where the formic-acid-mediated pathway dominates. We also find that on Ni(110), hydrogenation of CH 2 O* to CH 3 O* and that to CH 2 OH* both contribute to MeOH synthesis. Based on the derived energetics, we ascertain that CH 3 O* hydrogenation to CH 3 OH* is likely the rate-determining step along the CH 3 O* pathway on Ni(110). Remarkably, CH 3 O* hydrogenation can be facilitated by the presence of HCO*, demonstrating the promotional effect of CO. Furthermore, we show that CO also participates in methanol synthesis directly via its hydrogenation to HCO* and further to CH 2 O*. Additional microkinetic modeling by considering feed composition and reaction conditions would provide further mechanistic insights into methanol synthesis on Ni(110).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Translational and internal energy distributions of methyl and hydroxyl radicals produced by 157 nm photodissociation of amorphous solid methanol

Methanol is typically observed within water-rich interstellar ices and is a source of interstellar organic species. Following the 157 nm photoexcitation of solid methanol at 90 K, desorbed CH{sub 3}(v=0) and OH(v=0,1) radicals have been observed in situ, near the solid surface, using resonance-enhanced multiphoton ionization (REMPI) detection methods. Time-of-flight and rotationally resolved REMPI spectra of the desorbed species were measured, and the respective fragment internal energy and kinetic energy distributions were obtained. Photoproduction mechanisms for CH{sub 3} and OH radicals from solid methanol are discussed. The formation of O({sup 1}D and {sup 3}P) atoms and H{sub 2}O was investigated, but the yield of these species was found to be negligible. CH{sub 3} products arising following the photoexcitation of water-methanol mixed ice showed similar kinetic and internal energy distributions to those from neat methanol ice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties of a soft-core model of methanol: An integral equation theory and computer simulation study

Thermodynamic and structural properties of a coarse-grained model of methanol are examined by Monte Carlo simulations and reference interaction site model (RISM) integral equation theory. Methanol particles are described as dimers formed from an apolar Lennard-Jones sphere, mimicking the methyl group, and a sphere with a core-softened potential as the hydroxyl group. Different closure approximations of the RISM theory are compared and discussed. The liquid structure of methanol is investigated by calculating site-site radial distribution functions and static structure factors for a wide range of temperatures and densities. Results obtained show a good agreement between RISM and Monte Carlo simulations. The phase behavior of methanol is investigated by employing different thermodynamic routes for the calculation of the RISM free energy, drawing gas-liquid coexistence curves that match the simulation data. Preliminary indications for a putative second critical point between two different liquid phases of methanol are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature of maximum density and excess thermodynamics of aqueous mixtures of methanol

In this work, we present a study of representative excess thermodynamic properties of aqueous mixtures of methanol over the complete concentration range, based on extensive computer simulation calculations. In addition to test various existing united atom model potentials, we have developed a new force-field which accurately reproduces the excess thermodynamics of this system. Moreover, we have paid particular attention to the behavior of the temperature of maximum density (TMD) in dilute methanol mixtures. The presence of a temperature of maximum density is one of the essential anomalies exhibited by water. This anomalous behavior is modified in a non-monotonous fashion by the presence of fully miscible solutes that partly disrupt the hydrogen bond network of water, such as methanol (and other short chain alcohols). In order to obtain a better insight into the phenomenology of the changes in the TMD of water induced by small amounts of methanol, we have performed a new series of experimental measurements and computer simulations using various force fields. We observe that none of the force-fields tested capture the non-monotonous concentration dependence of the TMD for highly diluted methanol solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unbiased water and methanol maser surveys of NGC 1333

We present the results of unbiased 22 GHz H{sub 2}O water and 44 GHz class I CH{sub 3}OH methanol maser surveys in the central 7' × 10' area of NGC 1333 and two additional mapping observations of a 22 GHz water maser in a ∼3' × 3' area of the IRAS4A region. In the 22 GHz water maser survey of NGC 1333 with a sensitivity of σ ∼ 0.3 Jy, we confirmed the detection of masers toward H{sub 2}O(B) in the region of HH 7-11 and IRAS4B. We also detected new water masers located ∼20'' away in the western direction of IRAS4B or ∼25'' away in the southern direction of IRAS4A. We could not, however, find young stellar objects or molecular outflows associated with them. They showed two different velocity components of ∼0 and ∼16 km s{sup –1}, which are blue- and redshifted relative to the adopted systemic velocity of ∼7 km s{sup –1} for NGC 1333. They also showed time variabilities in both intensity and velocity from multi-epoch observations and an anti-correlation between the intensities of the blue- and redshifted velocity components. We suggest that the unidentified power source of these masers might be found in the earliest evolutionary stage of star formation, before the onset of molecular outflows. Finding this kind of water maser is only possible through an unbiased blind survey. In the 44 GHz methanol maser survey with a sensitivity of σ ∼ 0.5 Jy, we confirmed masers toward IRAS4A2 and the eastern shock region of IRAS2A. Both sources are also detected in 95 and 132 GHz methanol maser lines. In addition, we had new detections of methanol masers at 95 and 132 GHz toward IRAS4B. In terms of the isotropic luminosity, we detected methanol maser sources brighter than ∼5 × 10{sup 25} erg s{sup –1} from our unbiased survey.

79 ASTRONOMY AND ASTROPHYSICS↗