Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Melting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of melt shearing on D -mannitol crystal twisting in the presence of small molecule and macromolecular additives

Here, many molecular crystals grow as twisted lamellae from the melt when the driving force is high, but the mechanisms governing the spontaneous formation of helicoidal crystallites are varied and those operative in particular cases are difficult to identify. Polyvinylpyrrolidone (PVP) induces the crystallization of D-mannitol as banded spherulites comprised of twisted fibrils emanating radially from spherulite nucleation centers. The molecular weight of the PVP phase affects the twisting pitch, P, (rotation of the crystallite by 180°), in D-mannitol thin films crystallized from the melt. At a relatively high crystallization temperature (T c =130°C), P was sensitive to the PVP molecular weight, ranging from 390±20 μm for D-mannitol films incorporating 15 wt% 10 kDa PVP to 20±3 μm for the same weight of 1300 kDa PVP. Magnitudes of complex viscosities, |η*|, of D-mannitol/PVP melts measured via small-amplitude oscillatory shearing were strongly dependent on the PVP molecular weight, but were not correlated to P(T). Instead, P was sensitive to the dynamic PVP chain conformation during D-mannitol crystallization. Under steady torsional shear, P decreased from~30 μm to~8μm with increasing shear rates from 0.01 to 100 s -1 for D-mannitol films crystallized at 130°C in the presence of 15 wt% 10 or 1300 kDa PVP. Shear forces decrease the entanglement density of polymer chains while orienting the chains along the stream lines of the viscometric flow, indicating that the conformations of macromolecular additives can affect the pitch of banded spherulites. By contrast, P in D-mannitol twisted by D-sorbitol was independent of shear rate.

36 MATERIALS SCIENCE↗
DOE OSTI2025

LionGlass™: A low‐melting, carbonate‐free alternative to soda lime silicate glass

LionGlass™ is Penn State University's patent-pending alumino-silicophosphate glass compositional family that offers, for the first time, a viable low-melting, carbonate-free alternative to soda lime silicate glass by (a) lowering the melting temperature by up to 400°C compared to soda lime silicate glass and (b) eliminating the use of carbonate batch materials. The viscosity curve of LionGlass is shifted downward in temperature compared to soda lime silicate glass, enabling melting at much lower temperatures. LionGlass also has significantly improved resistance to crack initiation compared to soda lime silicate glass. Other properties, such as thermal expansion coefficient and optical dispersion curve, are comparable to those of traditional soda lime silicate glass.

Lion-Glass↗
DOE OSTI2022

Uncertainties Induced by Processing Parameter Variation in Selective Laser Melting of Ti6Al4V Revealed by In-Situ X-ray Imaging

Selective laser melting (SLM) additive manufacturing (AM) exhibits uncertainties, where variations in build quality are present despite utilizing the same optimized processing parameters. In this work, we identify the sources of uncertainty in SLM process by in-situ characterization of SLM dynamics induced by small variations in processing parameters. We show that variations in the laser beam size, laser power, laser scan speed, and powder layer thickness result in significant variations in the depression zone, melt pool, and spatter behavior. On average, a small deviation of only ~5% from the optimized/reference laser processing parameter resulted in a ~10% or greater change in the depression zone and melt pool geometries. For spatter dynamics, small variation (10 μm, 11%) of the laser beam size could lead to over 40% change in the overall volume of the spatter generated. The responses of the SLM dynamics to small variations of processing parameters revealed in this work are useful for understanding the process uncertainties in the SLM process.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of laser melt schedule on the microstructure of additively manufactured IN718 Superalloy

Laser powder bed fusion (L-PBF) has enabled the fabrication of geometrically complex metallic structures and components that are challenging to producing using conventional manufacturing approaches. The site-specific and far from equilibrium thermal conditions of L-PBF offer the potential to facilitate multi-length scale design of structure and properties across the atomic-through macro-levels. However, L-PBF systems face scalability challenges due to throughput constraints. Laser rotary powder bed fusion (L-RPBF) systems are being investigated as a solution to enhance the deposition rates compared to conventional L-PBF. Rotary systems also offer additional flexibility for controlling the time structure of melting through laser interleaving on alternating layers. Here, in this study, IN718 test samples were printed using single-laser or interleaved dual-laser configuration in a L-RPBF system to investigates the effect of process settings and melt-interleaving on as-fabricated microstructure. The microstructural evolution, such as grain size and crystallographic texture, was assessed by determining variations in the melt-pool shapes. Laser interleaving leads to a reduction in average grain size compared to single laser by ∼ 40 % at high power (400 W) and by ∼36 % at medium power (370 W). Results presented here identify key challenge for obtaining uniform microstructures and barriers for the broader adoption of high-deposition rate L-RPBF.

Dual-laser↗
DOE OSTI2023

Melt pool instability detection using coaxial photodiode system validated by in-situ X-ray imaging

A co-axial photodiode monitoring system with high temporal resolution has been integrated into a proven test bench enabling synchronized side-view high speed X-ray imaging of melt pool dynamics and top-view spectral emission characterization of the melt pool. Here, this setup enables direct observation of melt pool phenomena and correlation between the two monitoring systems which can be directly scaled to commercial systems. The work demonstrates a 92% detection rate in keyhole collapse phenomena related to defect generation in SLM. Furthermore, the impact of gas flow on monitoring signals is studied to understand the fundamental importance of gas flow in commercial systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Temperature and Composition Dependence Modeling of Viscosity and Electrical Conductivity of Low-Activity Waste Glass Melts

The development of models that accurately relate the properties of a glass melt to its temperature and composition is important for glass formulation, melter control, and modeling the melt flow, refractory corrosion, and production rate. Using a database consisting of more than 4,000 data points measured between 900 °C and 1250 °C for over 600 unique low-activity waste glass compositions, we developed models for the melt viscosity and electrical conductivity. Models based on the Gaussian process regression approach outperformed models based on the Vogel–Fulcher–Tammann equation according to four standard metrics and yielded reliable prediction intervals. The models found primarily linear effects between properties and individual components, except for the effect of the Na 2 O mass fraction on the electrical conductivity. The effects were found to be consistent with current theories on physical processes involved with those properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dual X-ray computed tomography-aided classification of melt pool boundaries and flaws in crept additively manufactured parts

In metal additive manufacturing (AM), understanding the process-structure-performance relationships requires a combination of multi-scale characterization techniques that allows for the measurement of the melt pool shape and boundary and classifying various defects and flaws in the AM parts. Such approaches can be destructive, only 2D in nature, or have a small field of view and can be complex to co-register and analyze. Here, in this work, we present a non-destructive 3D inspection technique that employs dual-energy X-ray computed tomography (XCT) along with a model-based iterative reconstruction (MBIR) and a new segmentation algorithm. The proposed approach and algorithm are not only capable of classifying and quantifying flaws such as pores, cracks, and inclusions, but they also allow for the extraction of microstructural features such as melt pool boundaries (MPB) and melt pool regions (MPR), that can help understand process-structure-performance relationships for alloys under study. As an exemplar application, we employed the method for characterization of an additively manufactured aluminum alloy crept under tensile stress at 300 °C for 1064 h. Our results demonstrate high quality segmentation and classification of various flaws and MPB and MPR, for the first time, using 3D X-ray CT inspection. The delineated MPB and MPR in the crept samples reveal the preferential growth paths of cracks that formed during creep deformation. The technique was used for successfully quantifying the characteristics (number of defects, their density, volume fraction, etc.) of the manufacturing-induced pores and creep-induced cracks, which is necessary to better understand the creep failure mechanisms of the material.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Melting Curve and Phase Relations of Fe-Ni Alloys: Implications for the Earth's Core Composition

We discuss that nickel is the second most abundant element in the Earth's core. However, the properties of Fe-Ni alloys are still poorly constrained under planetary cores conditions, in particular concerning the effect of Ni on the melting curve of Fe. Here we show that Ni alloying up to 36 wt% does not affect the melting curve of Fe up to 100 GPa. However, Ni strongly modifies the hexagonal-closed-packed/face-centered-cubic (hcp/fcc) phase boundary, pushing the hcp/fcc/liquid triple point of Fe-20wt%Ni to higher pressures and temperatures. Our results allow constraining the triple point for Fe-10wt%Ni, a composition relevant for the Earth interior, and point out a decrease of the melting temperature at core-mantle boundary by 400 K with respect to pure Fe. A lower amount of light elements than previously predicted is thus required to reduce the crystallization temperature of core materials below that of a peridotitic lower mantle, in better agreement with geochemical observations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Melting diamond in the diamond cell by laser-flash heating

The phase behavior of carbon at high pressure and the search for carbon structures denser than diamond has been explored for decades showing large discrepancies, with many fundamental questions remaining unresolved. Here we show evidence of melting above the graphite-diamond-liquid (GDL) triple point (~13 GPa, 4000 K) up to 50 GPa on samples recovered from single flash-heating events using spectroscopic and electron microscopic methods. The results show that for all pressures, diamond melts below the triple point temperature contradicting previous studies, most of which predict a positive slope of the melting curve.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Melting and freezing of a skyrmion lattice

We report comprehensive Monte–Carlo studies of the melting of skyrmion lattices (SkL) in systems of small, medium, and large sizes with the number of skyrmions ranging from 10 3 to over 10 5 . Large systems exhibit hysteresis similar to that observed in real experiments on the melting of SkLs. For sufficiently small systems which achieve thermal equilibrium, a fully reversible sharp solid–liquid transition on temperature with no intermediate hexatic phase is observed. A similar behavior is found on changing the magnetic field that provides the control of pressure in the SkL. Here, we find that on heating the melting transition occurs via a formation of grains with different orientations of hexagonal axes. On cooling, the fluctuating grains coalesce into larger clusters until a uniform orientation of hexagonal axes is slowly established. The observed scenario is caused by collective effects involving defects and is more complex than a simple picture of a transition driven by the unbinding and annihilation of dislocation and disclination pairs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Shock-induced melting of [100] lithium fluoride: Sound speed and Hugoniot measurements to 230 GPa

Although [100] lithium flouride (LiF) is the most widely used optical window material in dynamic compression experiments, its high stress (>100 GPa) shock compression response, including melting, is not well understood. To address this need, we measured wave profiles in plate impact experiments to determine the Hugoniot states and longitudinal sound speeds in [100] LiF crystals shock compressed to 231 GPa. The measured peak states are fitted well by a linear shock velocity-particle velocity relation, providing an accurate determination of the LiF Hugoniot curve to significantly higher stresses than previous experiments. The longitudinal sound speeds show a near linear increase with density compression to 182 GPa. Between 182 GPa and 195 GPa, the sound speed and the longitudinal modulus decrease abruptly, due to shock-induced melting. The increasing sound speeds and moduli at higher stresses suggest that shock compressed LiF is fully liquid at 195 GPa and above, allowing determination of the Gruneisen parameter for liquid LiF. Here, the melt stress determined here differs from that predicted by current multiphase equations of state for LiF. Our results provide important insight into the high stress solid and liquid states of shock compressed LiF and point to the need for an improved multiphase equation of state at high pressures and high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Solid structure of Li 2 BeF 4 (FLiBe) from room temperature to melting studied by neutron and X-ray diffraction

Molten fluoride salts such as Li 2 BeF 4 (FLiBe) are used in molten salt reactors, fluoride-salt-cooled high-temperature reactors and fusion reactors as a fuel solvent, coolant and/or tritium breeding medium. In engineered systems that use molten salt, solid-state material will be present during melting and freezing scenarios, and therefore the temperature-dependent properties of the solid and solid/liquid phase transition merit investigation. To observe the behavior of the solid state of Li 2 BeF 4 from room temperature to melting, this work used neutron and X-ray diffraction to measure the changes in the lattice parameters and volume of the crystalline unit cell and compared the results with prior low-temperature data for solid Li 2 BeF 4 . From neutron diffraction data it is also possible to identify anisotropy: centimetre-scaled crystals align preferentially with the a axes parallel to the direction of freezing front propagation, and the c axes expand 54% more than the a axes. This work provides the lattice constants as a function of temperature, quantifies the thermal expansion, and determines the equation describing the change in density for solid Li 2 BeF 4 from room temperature to 459°C to be ρ solid (kg m −3 ) = 2182 (3) − 0.115 (2) T (°C) and the volume expansion upon melting to be less than 5%. This density changes depending on molecular weight and enrichment.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hanford low-activity waste glass composition-temperature-melt viscosity relationships

This study developed a model for predicting viscosity of alkali-alumino-borosilicate glass melts as functions of composition and temperature. The model is based on a total of 3935 viscosity-temperature data from 574 glasses with viscosity values ranging from 2.53 to 7260 Poise (P) in the temperature range of 900–1260°C. Several different model forms were surveyed, including those based on Arrhenius, Vogel-Fulcher-Tammann, Avramov-Milchev, and Mauro-Yue-Ellison-Gupta-Allen. For each of these models, combinations of the temperature-independent parameters were fitted to composition. It was found that generally fitting more than one temperature-independent parameter as functions of composition resulted in overfitting. The Avramov-Milchev-based model was found to best represent the Hanford low-activity waste glass melt viscosity data based on model fit and validation statistics. A 21-term partial quadratic mixture model was recommended for use. This model predicts melt viscosity with a root-mean square error of .1736 ln(P), which is similar to the error in viscosity measurements from replicate glass analyses of .1383 ln(P). Viscosity was found to be most increased by SiO 2 > Al 2 O 3 > ZrO 2 > SnO 2 and most decreased by Li 2 O > Na 2 O > B 2 O 3 > CaO > K 2 O > MgO, at temperatures from 900 to 1260°C.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Scoping studies for low-temperature melting ZnO–Bi 2 O 3 –(B 2 O 3 , SiO 2 ) binder glass

In this work, low melting point glass systems were explored as candidates for binders of solid oxide nuclear wastes which include volatile elements such as radioactive iodine. The base glass systems considered were ZnO-Bi 2 O 3 -B 2 O 3 and ZnO-Bi 2 O 3 -SiO 2 , with specific compositions selected for synthesis trials based on available phase diagrams and a desire to explore the whole glass-forming region. Ten compositions were synthesized by melt quenching. Promising candidate glass binders were selected based on absence of crystallization and favorable thermal properties, including low glass transition temperature (T g ) combined with a high crystallization onset temperature. These thermal properties indicate stable glass forming which would lead to sintering behavior needed for glass binding. Compositional effects include: higher Bi 2 O 3 content lead to lower Tg values, high ZnO content generally led to crystallization on quench, and high SiO 2 content resulted in requirements for excessively high melting temperature. 25ZnO-15Bi 2 O 3 -60B 2 O 3 was down-selected for some detailed crystallization versus time and temperature studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Melt Wire Analyses for the Colorado School of Mines (CSM 16-10584) Irradiation in ATR

PNNL project 74242 involves the analysis of neutron fluence monitors and melt wires irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory in accordance with MPO 00236287 and Statement of Work No. 17370, Rev. 0, PNNL Analysis of NSUF Flux and Melt Wire Capsules. This report is for the Colorado School of Mines (CSM 16-10584) experiment which was conducted in position B5 of the ATR. Neutron fluence monitor results were reported in February 2021 in report Neutron Dosimetry for the Colorado School of Mines (CM 16-10584) Irradiation in ATR. This report presents the analyses of the melt wire capsules that were included along with the neutron fluence monitors. Each capsule was identified by the ID stamp on the bottom, then opened to assess the condition of the Pb and Zn-Al wires as well as the Bi powder. Pictures are included to illustrate the results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

The Melt Enthalpy of Pu 6 Fe

Schwartz, et al., previously reported calorimetry measurements conducted on a Pu-Pu 6 Fe mixture, from which they derived a melt enthalpy of 31.2 J/g (46.6 kJ/mol) for Pu 6 Fe. This was the first—and remains the only—such value to appear in the literature. We reanalyze those results in light of two contributions to the measured heat flow not considered in the original report: the melt enthalpy of the excess Pu and the subsequent heating of the liquid mixture. These corrections yield a revised value of 24.4 J/g (36.3 kJ/mol), which we show to be consistent with the melt enthalpy of U 6 Fe.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of Bismuth and Platinum Bi-Metallic Nanoparticles to Enhance Melt Wire Temperature Resolution

Advanced manufacturing (AM) based on direct-write (DW) technologies has emerged as the predominant enabler for the fabrication of active and passive sensors to be deployed in harsh operating environments seen in a nuclear reactor. Recently, Idaho National Laboratory and Boise State University have recently established capabilities to incorporate advanced manufacturing (AM) methods to accelerate, modernize and enhance functionality of nuclear sensors and instrumentation to achieve the goal of enhancing the safety and efficiency of nuclear reactors. A significant thrust of this work includes the development of nuclear relevant feedstock materials compatible with a variety of direct-write processes for the development, fabrication and testing of AM sensors for peak temperature detection and neutron flux monitoring. For this report, bismuth and bismuth/platinum (BiPt) bi-metallic nanoparticles were synthesized using wet chemical approaches to develop bi-metallic feedstock materials to enhance the sensitivity of melt wires for peak temperature detection. Nanoparticle characterization was performed with Transmission Electron Microscopy (TEM) for nanoparticle composition and size, Transmission X-Ray Diffraction Fluorescence (TXRF) for nanoparticle composition, and Differential Scanning Calorimetry to elucidate the melting point of BiPt bi-metallic nanoparticles. Preliminary results indicate bi-metallic BiPt nanoparticles as a viable pathway for fabricating high resolution AM melt wires.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Imaging Field–Driven Melting of a Molecular Solid at the Atomic Scale

Solid–liquid phase transitions are basic physical processes, but atomically resolved microscopy has yet to capture their full dynamics. A new technique is developed for controlling the melting and freezing of self–assembled molecular structures on a graphene field–effect transistor (FET) that allows phase–transition behavior to be imaged using atomically resolved scanning tunneling microscopy. This is achieved by applying electric fields to 2,3,5,6–tetrafluoro–7,7,8,8–tetracyanoquinodimethane–decorated FETs to induce reversible transitions between molecular solid and liquid phases at the FET surface. Nonequilibrium melting dynamics are visualized by rapidly heating the graphene substrate with an electrical current and imaging the resulting evolution toward new 2D equilibrium states. An analytical model is developed that explains observed mixed–state phases based on spectroscopic measurement of solid and liquid molecular energy levels. The observed nonequilibrium melting dynamics are consistent with Monte Carlo simulations.

36 MATERIALS SCIENCE↗