Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MIMIC models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

A grillage model for predicting wrinkles in annular graphene under circular shearing

This paper is concerned with a Timoshenko grillage model for modeling the wrinkling phenomenon in annular graphene under circular shearing applied at its inner edge. By calibrating the grillage model results against the molecular mechanics (MM) results, the grillage model comprising beams of elliptical cross-section orientated along the carbon-carbon bond has section dimensions of 0.06 nm for the major axis length and 0.036 nm for the minor axis length. Moreover, the beams are connected to one another at 0.00212 nm from the geometric centric. This eccentric connection of beams allows the proposed grillage model to cater for the cross-couplings among bonds that produce the out-of-plane wrinkling pattern. The out-of-plane to in-plane bending stiffnesses' ratio is 0.36, and the cross bending stiffness provided by the ellipse eccentricity is 0.025 times that of the in-plane bending stiffness. Besides furnishing identical wave numbers as well as amplitudes and wavelengths that are in good agreement with MM results, the grillage model can capture wrinkling patterns with a boundary layer, whereas plate and membrane models could not mimic the boundary layer.

36 MATERIALS SCIENCE↗

Simulating plasma wave propagation on a superconducting quantum chip

Quantum computers may one day enable the efficient simulation of strongly coupled plasmas that lie beyond the reach of classical computation in regimes where quantum effects are important and the scale separation is large. Here, in this article, we take a first step toward efficient simulation of quantum plasmas by demonstrating linear plasma wave propagation on a superconducting quantum chip. Using high-fidelity and highly expressive device-native gates, combined with an error-mitigation technique, we simulate the scattering of laser pulses from inhomogeneous plasmas. Our approach is made feasible by the identification of a suitable local spin model whose excitations mimic plasma waves, and whose circuit implementation requires a lower gate count than other proposed approaches that would require a future fault-tolerant quantum computer. This work opens avenues to study more complicated phenomena that cannot be simulated efficiently on classical computers, such as nonlinear quantum dynamics when strongly coupled plasmas are driven out of equilibrium.

general physics↗

Cracking during pyrolysis of preceramic polymers within glass microtubes

Abstract Cracking of preceramic polymers during pyrolysis under highly‐constrained conditions is examined by X‐ray computed tomography of fine glass microtubes containing the pyrolyzing material. The microtubes represent model geometries that mimic the long channels between fibers during production of ceramic composites by precursor impregnation and pyrolysis. Complementary fracture mechanics analyses of interface cracking and crack kinking are used to glean insights into the conditions under which periodic alternating cracks form. A key finding is that alternating cracks are an inherent feature of constrained pyrolysis . This feature is attributable in large part to the high energy release rates for interface cracks to kink into the pyrolyzing material under the hydrostatic tension developed during pyrolysis. It also requires interfaces with toughness comparable to that of the pyrolyzing material, to prevent large‐scale interface separation. The results further indicate the need for small uniform spaces for pyrolysis within fiber preforms in order to produce networks of fine periodic pyrolysis cracks; these networks in turn facilitate impregnation and pyrolysis in subsequent processing cycles.

Larson, Natalie M.↗

Cobalt-60 tomotherapy: Clinical treatment planning and phantom dose delivery studies

Purpose: Investigations have shown that a Cobalt-60 (Co-60) radioactive source has the potential to play a role in intensity modulated radiation therapy (IMRT). In this paper, Co-60 tomotherapy's conformal dose delivery potential is evaluated by delivering conformal dose plans on a cylindrical homogeneous phantom containing clinical structures similar to those found in a typical head and neck (H and N) cancer. Also, the clinical potential of Co-60 tomotherapy is investigated by generating 2D clinical treatment plans for H and N and prostate anatomical regions. These plans are compared with the 6 MV based treatment plans for modalities such as linear accelerator-based tomotherapy and broad beam IMRT, and 15 MV based 3D conformal radiation therapy (3DCRT).Methods: For experimental validation studies, clinical and nonclinical conformal dose patterns were delivered on circular, homogeneous phantoms containing GafChromic film. For clinical planning study, dose calculations were performed with the EGSnrc Monte Carlo program, where a Theratronics 780C Co-60 unit and a 6 MV linear accelerator were modeled with a MIMiC binary multileaf collimator. An inhouse inverse treatment planning system was used to optimize tomotherapy plans using the same optimization parameters for both Co-60 and 6 MV beams. The IMRT and 3DCRT plans for the clinical cases were generated entirely in the Eclipse treatment planning system based on inhouse IMRT and 3DCRT site specific protocols.Results: The doses delivered to the homogeneous phantoms agreed with the calculations, indicating that it is possible to deliver highly conformal doses with the Co-60 unit. The dose distributions for Co-60 tomotherapy clinical plans for both clinical cases were similar to those obtained with 6 MV based tomotherapy and IMRT, and much more conformal compared to 3DCRT plans. The dose area histograms showed that the Co-60 plans achieve the dose objectives for the targets and organs at risk.Conclusions: These results confirm that Co-60 tomotherapy is capable of providing state-of-the-art conformal dose delivery and could be used for the treatment of targets in both small and larger separation anatomical regions.

61 RADIATION PROTECTION AND DOSIMETRY↗

Bio-inspired MOF-based Catalysts for Lignin Valorization.

Lignin is a potentially plentiful source of renewable organics, with %7E50Mtons/yr produced by the pulp/paper industry and 200-300 Mtons/yr projected production by a US biofuels industry. This industry must process approximately 1 billion tons of biomass to meet the US Renewable Fuel goals. However, there are currently no efficient processes for converting lignin to value-added chemicals and drop-in fuels. Lignin is therefore an opportunity for production of valuable renewable chemicals, but presents staggering technical and economic challenges due to the quantities of material involved and the strong chemical bonds comprising this polymer. Aggressive chemistries and high temperatures are required to degrade lignin without catalysts. Moreover, chemical non-uniformity among lignins leads to complex product mixtures that tend to repolymerize. Conventional petrochemical approaches (pyrolysis, catalytic cracking, gasification) are energy intensive (400-800 degC), require complicated separations, and remove valuable chemical functionality. Low-temperature (25-200 degC) alternatives are clearly desirable, but enzymes are thermally fragile and incompatible with liquid organic compounds, making them impractical for large-scale biorefining. Alternatively, homogeneous catalysts, such as recently developed vanadium complexes, must be separated from product mixtures, while many heterogenous catalysts involve costly noble metals. The objective of this project is to demonstrate proof of concept that an entirely new class of biomimetic, efficient, and industrially robust synthetic catalysts based on nanoporous Metal- Organic Frameworks (MOFs) can be developed. Although catalytic MOFs are known, catalysis of bond cleavage reactions needed for lignin degradation is completely unexplored. Thus, fundamental research is required that industry and most sponsoring agencies are currently unwilling to undertake. We introduce MOFs infiltrated with titanium and nickel species as catalysts for the C-O bond hydrogenolysis in model compounds, which mimic the b-O-4, a-O-4, and 4-O-5 linkages of natural lignin. The versatile IRMOF-74(n) series is proposed as a platform for creating efficient hydrogenolysis catalysts as it not only displays tunable pore sizes, but also has the required thermal and chemical stability. The catalytic C-O bond cleavage occurs at 10 bar hydrogen pressure and temperatures as low as 120 degC. The conversion efficiency of the aromatic ether substrates into the corresponding hydrocarbons and phenols varies as PhCH 2 CH 2 OPh > PhCH 2 OPh > PhOPh (Ph = phenyl), while the catalytic activity generally follows the following trend Ni@IRMOF-74>Ti@IRMOF-74>IRMOF-74. Conversions as high as 80%, coupled with good selectivity for hydrogenolysis vs. hydrogenation, highlight the potential of MOF-based catalysts for the selective cleavage of recalcitrant aryl-ether bonds found in lignin and other biopolymers. This project supports the DOE Integrated Biorefinery Program goals, the objective of which is to convert biomass to fuels and high-value chemicals, by addressing an important technology gap: the lack of low-temperature catalysts suitable for industrial lignin degradation. Biomass, which is %7E30 wt% lignin, constitutes a potentially major source of platform chemicals that could improve overall profitability and productivity of all energy-related products, thereby benefiting consumers and reducing national dependence on imported oil. Additionally, DoD has a strong interest in low-cost drop-in fuels (Navy Biofuel Initiative) and has signed a Memorandum of Understanding with DOE and USDA to develop a sustainable biofuels industry.

Allendorf, Mark D.↗

Experiment K-6-08. Biochemical and histochemical observations of vastus medialis

Muscles of the hindlimb in the rat have been used to demonstrate the effects of unloading in weightlessness and in animal models used to mimic weightlessness. The vastus medialis (VM) is discussed here. Samples were obtained from rats exposed to weightlessness for 12 days in Cosmos 1887 (Experiment K-6-08, coordinated by Dr. V.S. Oganov). The principal objective of this study was to ascertain if the vastus medialis responded to 12 days of microgravity exposure. The loss in muscle mass is greatest, -43 percent, when comparing F vs B, and least, -13 percent, when comparing F vs. V. Taken at face value these differences may be misleading. Due to the variability of the muscle weight in the basal group, these muscle mass losses may be exaggerated. In terms of percent water, there were no differences between the flight and the control groups. In spite of the limited sample, researchers conclude that muscle mass changes in the VM are not significant. Although some of the morphological parameters suggest a small degree of atrophy in the vastus medialis, the biochemical analyses (protein, RNA and DNA) suggest that these may be minimal and functionally nonsignificant. The relatively similar CS and LDH activities of VM from F and various control groups, as well as the lack of difference in LPL activity between F and S rats, suggests that there is little or no effect on the oxidative or glycolytic function of this muscle. Since the VM is chiefly a mixed fast twitch muscle, these metabolic indices of energy production are relatively unchanged. The results of VM studies are in agreement with previous observations of another type II fast twitch muscle, the EDL, from SL-3 rats which did not respond markedly to weightlessness and whole body suspension.

Musacchia, X. J.↗

Rotaing Systems Used as Microgravity Simulators for Studies of Cartilage Differentiation

Just as Studies of abnormal chondrogenesis produced by mutation or teratogen add to our understanding of the normal chondrogenic process, studying chondrogenesis in space may assist in 1 g studies of chondrogenic defects. Opportunities to study cartilage differentiation in space, however, are limited, so systems have been developed which can be used at 1 g to simulate microgravity. One model used to mimic effects of microgravity is the clinostat a rotating system which converts gravity from a vector quantity to a scalar quantity. In slow rotating clitiostat systems, cells are attached to a substrate as at 1 g, and rotated with the plane of the culture perpendicular to the gravitational field. Another rotating system used as a microgravity simulator is the Slow Turning Lateral Vessel (STLV) which uses a rotating cylindrical vessel, completely filled with medium to culture cells in suspension without subjecting them to damaging shear forces. Embronic limb cells cultured in the slow rotating clinostat, the STLV, and in space exhibit changes in chondrogenesis related to the stage at which the cells are exposed. Clinorotation decreases the number of nodules in micromass cultures, showing an effect on the condensation process. In micromass cultures flown in space, condensation occurred preflight, so the primary effect of microgravity exposure was on matrix production. In chondrocytes in the STLV, as in growth plates of spaceflown rats, hypertrophy was decreased. Future clinostat and spaceflight experiments will examine the effect on adhesive molecules and on cytoskeletal organization because of their involvement in the processes that are affected. The mechanisms by which micro-gravity alters phenotype modulation, matrix production and aggregation, and chondrocyte hypertrophy after the cartilage phenotype is established must also be elucidated. The mechanisms resulting in cartilage defects are to a large extent unknown, and microgravitv may provide a way to identify them.

Duke, Pauline Jackie↗

Alterations in Skeletal Muscle Function with Microgravity, and the Protective Effects of High Resistance Isometric and Isotonic Exercise

Exposure to microgravity or models designed to mimic the unloaded condition, such as bed rest in humans and hindlimb unloading (HU) in rats leads to skeletal muscle atrophy, a loss in peak force and power, and an increased susceptibility to fatigue. The posterior compartment muscles of the lower leg (calf muscle group) appear to be particularly susceptible. Following only 1 wk in space or HU, rat soleus muscle showed a 30 to 40% loss in wet weight. After 3 wk of HU, almost all of the atrophied soleus fibers showed a significant increase in maximal shortening velocity (V(sub 0)), while only 25 to 30 % actually transitioned to fast fibers. The increased V(sub 0), was protective in that it reduced the decline in peak power associated with the reduced peak force. When the soleus is stimulated in situ following HU or zero-g one observes an increased rate and extent of fatigue, and in the former the increased fatigue is associated with a more rapid depletion of muscle glycogen and lactate production. Our working hypothesis is that following HU or spaceflight in rats and bed rest or spaceflight in humans limb skeletal muscles during contractile activity depend more on carbohydrates and less on fatty acids for their substrate supply. Baldwin et al. found 9 days of spaceflight to reduce by 37% the ability of both the high and low oxidative regions of the vastus muscle to oxidize long-chain fatty acids. This decline was not associated with any change in the enzymes of the tricarboxylic acid cycle or oxidation pathway. The purpose of the current research was to establish the extent of functional change in the slow type I and fast type H fibers of the human calf muscle following 17 days of spaceflight, and determine the cellular mechanisms of the observed changes. A second goal was to study the effectiveness of high resistance isotonic and isometric exercise in preventing the deleterious functional changes associated with unloading.

Fitts, R. H.↗

Space flight and bone formation

Major physiological changes which occur during spaceflight include bone loss, muscle atrophy, cardiovascular and immune response alterations. When trying to determine the reason why bone loss occurs during spaceflight, one must remember that all these other changes in physiology and metabolism may also have impact on the skeletal system. For bone, however, the role of normal weight bearing is a major concern and we have found no adequate substitute for weight bearing which can prevent bone loss. During the study of this problem, we have learned a great deal about bone physiology and increased our knowledge about how normal bone is formed and maintained. Presently, we do not have adequate ground based models which can mimic the tissue loss that occurs in spaceflight but this condition closely resembles the bone loss seen with osteoporosis. Although a normal bone structure will respond to application of mechanical force and weight bearing by forming new bone, a weakened osteoporotic bone may have a tendency to fracture. The study of the skeletal system during weightless conditions will eventually produce preventative measures and form a basis for protecting the crew during long term space flight. The added benefit from these studies will be methods to treat bone loss conditions which occur here on earth.

Non-NASA Center↗

A Semantic Relatedness Approach for Traceability Link Recovery

Human analysts working with automated tracing tools need to directly vet candidate traceability links in order to determine the true traceability information. Currently, human intervention happens at the end of the traceability process, after candidate traceability links have already been generated. This often leads to a decline in the results accuracy. In this paper, we propose an approach, based on semantic relatedness (SR), which brings human judgment to an earlier stage of the tracing process by integrating it into the underlying retrieval mechanism. SR tries to mimic human mental model of relevance by considering a broad range of semantic relations, hence producing more semantically meaningful results. We evaluated our approach using three datasets from different application domains, and assessed the tracing results via six different performance measures concerning both result quality and browsability. The empirical evaluation results show that our SR approach achieves a significantly better performance in recovering true links than a standard Vector Space Model (VSM) in all datasets. Our approach also achieves a significantly better precision than Latent Semantic Indexing (LSI) in two of our datasets.

99 GENERAL AND MISCELLANEOUS↗

Development of a Conditioned System-Level Groundwater Model to Evaluate Long-Term Groundwater Impacts within a Performance Assessment - 20115

A preliminary performance assessment (PA) of single-shell tank Waste Management Area (WMA) A-AX located at the U.S. Department of Energy (DOE)'s Hanford Site in southeastern Washington is being conducted to satisfy the requirements of DOE Order 435.1 [1] as it relates to closure of the single-shell radioactive waste tanks in the WMA A-AX tank farms. A PA assesses the fate, transport, and impacts of radionuclides within a low-level radioactive waste disposal facility in its assumed closure configuration and the subsequent potential doses to humans over a 1,000-year compliance period and a 10,000-year performance evaluation period. The WMA A-AX preliminary PA evaluation is structured around the complementary use of process-level and system-level models to calculate the facility performance against established DOE Order 435.1 [1] performance objectives. Process-level models are those that represent a detailed phenomenological representation of processes of concern in the PA. Process models typically only represent one or a few of the components of the PA, such as groundwater flow and transport, and must be integrated with other modeling elements to perform PA calculations. System-level models are those that are abstracted from the process models, retaining the essential features of the process model, while allowing integration of all aspects of the PA in a single modeling framework. System-level models are often characterized by coarser numerical discretization, lower dimensionality, or other similar simplifications compared to the process-level model. Traditionally, a three-dimensional (3-D) process-level model is utilized primarily to evaluate the long-term impact on groundwater and the potential doses to individuals who consume contaminated groundwater. System-level models are also utilized to evaluate the groundwater pathway in PAs. These models typically have reduced dimensionality (1-D) and are conditioned utilizing flow fields (Darcy fluxes) and moisture content distributions that are abstracted from the process level models. The abstraction approach assures that the flow field in both models is consistent for a specific set of input parameters for flow, differing only in the discretization and dimensionality of the two models. The preliminary WMA A-AX PA incorporates a detailed representation of the geological system and hydraulic properties within the 3-D model STOMP{sup C} numerical code so that the effects of relevant features and processes on water flow and radionuclide transport in the subsurface can be evaluated. The complementary system-level model is developed utilizing the GoldSim{sup C} code to implement a simplified, 1-D equivalent model to represent the groundwater pathway. Contaminant transport through the vadose zone and unconfined aquifer for Tc-99 and I-129 were evaluated in each of the models. Adjustments to the saturated portion of the GoldSim{sup C} 1-D model were required to mimic the dispersion effect captured with the 3-D STOMP{sup C} model. Once this conditioning was conducted, highly similar results for the transport of Tc-99 and I-129 were achieved at the point of calculation, located 100 m downgradient from the WMA A-AX fenceline. These radionuclides represent elements that are regarded as primary dose drivers in the PA groundwater pathway analysis. The high degree of conformance between the two models suggests that the use of the equivalent 1-D system model is suitable for evaluating the full suite of radionuclides that will be released from the tank sources within WMA A-AX over the 1,000-year compliance period and over the 10,000-year evaluation period. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Modeling of Local BEAM Structure for Evaluation of MMOD Impacts to Support Development of a Health Monitoring System

This report summarizes initial modeling of the local response of the Bigelow Expandable Activity Module (BEAM) to micrometeorite and orbital debris (MMOD) impacts using a structural, non-linear, transient dynamic finite element code. Complementary test results for a local BEAM structure are presented for both hammer and projectile impacts. Review of these data provided guidance for the transient dynamic model development. The local model is intended to support predictions using the global BEAM model, described in a companion report. Two types of local models were developed. One mimics the simplified Soft-Goods (fabric envelop) part of the BEAM NASTRAN model delivered by the project. The second investigates through-the-thickness modeling challenges for MMOD-type impacts. Both the testing and the analysis summaries contain lessons learned and areas for future efforts.

Lyle, Karen H.↗

Understanding End‐of‐Century Snowpack Changes Over California's Sierra Nevada

Abstract This study uses dynamical and statistical methods to understand end‐of‐century mean changes to Sierra Nevada snowpack. Dynamical results reveal that middle‐elevation watersheds experience considerably more rain than snow during winter, leading to substantial snowpack declines by spring. Despite some high‐elevation watersheds receiving slightly more snow in January and February, the warming signal still dominates across the wet season and leads to notable declines by springtime. A statistical model is created to mimic dynamical results for 1 April snowpack, allowing for an efficient downscaling of all available general circulation models from the Coupled Model Intercomparison Project phase 5. For all general circulation models and emission scenarios, dramatic 1 April snowpack loss occurs at elevations below 2,500 m, despite increased precipitation in many general circulation models. Only 36% (±12%) of historical 1 April total snow water equivalent volume remains at the century's end under a “business‐as‐usual” emission scenario, with 70% (±12%) remaining under a realistic “mitigation” scenario.

Sun, Fengpeng↗

Leveraging the signature of heterotrophic respiration on atmospheric CO 2 for model benchmarking

Spatial and temporal variations in atmospheric carbon dioxide (CO 2 ) reflect large-scale net carbon exchange between the atmosphere and terrestrial ecosystems. Soil heterotrophic respiration (HR) is one of the component fluxes that drive this net exchange, but, given observational limitations, it is difficult to quantify this flux or to evaluate global-scale model simulations thereof. Here, we show that atmospheric CO 2 can provide a useful constraint on large-scale patterns of soil heterotrophic respiration. We analyze three soil model configurations (CASA-CNP, MIMICS, and CORPSE) that simulate HR fluxes within a biogeochemical test bed that provides each model with identical net primary productivity (NPP) and climate forcings. We subsequently quantify the effects of variation in simulated terrestrial carbon fluxes (NPP and HR from the three soil test-bed models) on atmospheric CO 2 distributions using a three-dimensional atmospheric tracer transport model. Our results show that atmospheric CO 2 observations can be used to identify deficiencies in model simulations of the seasonal cycle and interannual variability in HR relative to NPP. In particular, the two models that explicitly simulated microbial processes (MIMICS and CORPSE) were more variable than observations at interannual timescales and showed a stronger-than-observed temperature sensitivity. Our results prompt future research directions to use atmospheric CO 2 , in combination with additional constraints on terrestrial productivity or soil carbon stocks, for evaluating HR fluxes.

54 ENVIRONMENTAL SCIENCES↗

Reconstruction of neuronal input through modeling single-neuron dynamics and computations

Mathematical models provide a mathematical description of neuron activity, which can better understand and quantify neural computations and corresponding biophysical mechanisms evoked by stimulus. In this paper, based on the output spike train evoked by the acupuncture mechanical stimulus, we present two different levels of models to describe the input-output system to achieve the reconstruction of neuronal input. The reconstruction process is divided into two steps: First, considering the neuronal spiking event as a Gamma stochastic process. The scale parameter and the shape parameter of Gamma process are, respectively, defined as two spiking characteristics, which are estimated by a state-space method. Then, leaky integrate-and-fire (LIF) model is used to mimic the response system and the estimated spiking characteristics are transformed into two temporal input parameters of LIF model, through two conversion formulas. We test this reconstruction method by three different groups of simulation data. All three groups of estimates reconstruct input parameters with fairly high accuracy. We then use this reconstruction method to estimate the non-measurable acupuncture input parameters. Results show that under three different frequencies of acupuncture stimulus conditions, estimated input parameters have an obvious difference. The higher the frequency of the acupuncture stimulus is, the higher the accuracy of reconstruction is.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Blackstart of Power Grids with Inverter-Based Resources

This paper presents the findings of our investigation into inverter-based resource-(IBR-) driven blackstart of electric grids. Four potential black-start configurations with different setups are presented. To evaluate the technical feasibility of IBR-driven black start in the four configurations, a behavioral model of inverters that mimics current-limited inverter operation is developed using variable resistors in the MATLAB Simulink/Simscape environment. The inverter model is connected to an induction motor through transformers and a transmission line to simulate its startup. Simulation results show that even with the limited current supply capability of inverters because of their physical constraints, IBRs can black-start a motor under certain conditions. Results also show that by using soft-start techniques, such as ramped supply voltage, inrush currents can be reduced, thereby expanding the conditions under which IBRs can provide black-start support. Simulation results with different scenarios lead to discussions and key takeaways that could be valuable for further IBR-driven black-start research.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Blackstart of Power Grids with Inverter-Based Resources: Preprint

This paper presents the findings of our investigation into inverter-based resource- (IBR-) driven blackstart of electric grids. Four potential black-start configurations with different setups are presented. To evaluate the technical feasibility of IBR-driven black start in the four configurations, a behavioral model of inverters that mimics current-limited inverter operation is developed using variable resistors in the MATLAB Simulink/Simscape environment. The inverter model is connected to an induction motor through transformers and a transmission line to simulate its startup. Simulation results show that even with the limited current supply capability of inverters because of their physical constraints, IBRs can black-start a motor under certain conditions. Results also show that by using soft-start techniques, such as ramped supply voltage, inrush currents can be reduced, thereby expanding the conditions under which IBRs can provide black-start support. Simulation results with different scenarios lead to discussions and key takeaways that could be valuable for further IBR-driven black-start research.

14 SOLAR ENERGY↗