Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Influence of ball milling on atomic structure and magnetic properties of Co{sub 40}Fe{sub 22}Ta{sub 8}B{sub 30} glassy alloy

The influence of ball milling on the atomic structure and magnetic properties of the Co{sub 40}Fe{sub 22}Ta{sub 8}B{sub 30} metallic glass with a high thermal stability and excellent soft magnetic properties has been investigated. After 14 h of milling, the obtained powders were found to consist mainly of an amorphous phase and a small fraction of the (Co,Fe){sub 21}Ta{sub 2}B{sub 6} nanocrystals. The changes in the reduced pair correlation functions suggest noticeable changes in the atomic structure of the amorphous upon ball milling. Furthermore, it has been shown that milling is accompanied by introduction of compressive and dilatational sites in the glassy phase and increasing the fluctuation of the atomic-level hydrostatic stress without affecting the coordination number of the nearest neighbors. Ball milling has decreased the thermal stability and significantly affected the magnetic properties through increasing the saturation magnetization, Curie temperature of the amorphous phase and coercivity. - Highlights: • Ball milling affected the atomic structure of Co{sub 40}Fe{sub 22}Ta{sub 8}B{sub 30} metallic glass. • Mechanically-induced crystallization started after 4 h milling. • Milling increased the fluctuation of the atomic-level hydrostatic stress in glass. • Ball milling influenced the thermal stability and magnetic properties.

36 MATERIALS SCIENCE↗

Novel Electronic and Magnetic Properties of Graphene Nanoflakes in a Boron Nitride Layer

Novel electronic and magnetic properties of various-sized graphene nanoflakes (GNFs) embedded in a boron nitride (BN) layer are studied using ab initio methods. The feasibility of synthesizing hybrid GNF-BN structure, a desirable quantum dot structure, is explored. In this structure, photoexcited electrons and holes occupy the same spatial region - the GNF region - which offers an effective way to generate a GNF-based light-emitting device and adjust its emitted optical properties by controlling the size and array of GNF in the BN layer. Based on the important magnetism properties of embedded GNF, we propose a specific configuration to obtain a large spin. Together with the high stability of spin alignment, the proposed configuration can be exploited for spintronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic properties on the surface of FeAl stripes induced by nanosecond pulsed laser irradiation

We demonstrate the formation of magnetic nanostripes on the surface of Fe{sub 52}Al{sub 48} induced by nanosecond pulsed laser irradiation and investigate their magnetic properties. The magnetic stripe consists of a disordered A2 phase of Fe-Al alloys with Al-oxide along the [110] direction on the (111)-oriented plane. According to the focused magneto-optical Kerr effect measurement, the coercive force of the magnetic stripe obeys the 1/cos θ law, where θ is the field rotation angle estimated from the stripe direction. Also, the jump field can be observed in the magnetic hysteresis loop. These results indicate that the magnetization reversal in the magnetic stripe originates from the domain pinning, showing that the magnetization rotates incoherently.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of surface segregation on magnetic properties of FePt nanoparticles

Surface segregation leads to chemical disordering in magnetic alloy nanostructures and thus could have profound impact upon the magnetic properties of these nanostructures. In this study, we used the first-principles density functional theory calculation method to determine how Pt surface segregation (exchanging interior Pt with surface Fe atoms) would affect the magnetic properties of L1{sub 0} ordered FePt nanoparticles. For both cuboid and cuboctahedral FePt nanoparticles, we predicted that the Pt surface segregation process could cause a decrease in total magnetic moments, a change in (easy and/or hard) magnetization axes, and a reduction in magnetic anisotropy.

36 MATERIALS SCIENCE↗

Facile Synthesis of Spinel Ferrites with Enhanced Magnetic Properties from Two Intractable Metallurgical Resources: Zinc-Bearing Dust and Nickel Laterite Ore

Nickel laterite ore and zinc-bearing dust are multi-metal-associated and intractable resources. Comprehensive and cooperative utilization of zinc-bearing dust and nickel laterite ore for the preparation of spinel ferrites with enhanced magnetic properties by a facile process was proposed. The structure and magnetic properties of as-prepared spinel ferrites were characterized by X-ray diffraction (XRD), Raman spectroscopy, and Physical Property Measurement System (PPMS). The effect of mass ratios of zinc-bearing dust to nickel laterite ore, calcination temperature, and Zn substitution content on the as-prepared samples was investigated in detail. A single phase of Zn-substituted spinel ferrites (x= 0.00, 0.10, 0.20, and 0.30) could be obtained when the mass ratios were controlled at 1:0.4, 1:4:1.8, 1:2:1.5, and 1:1:1.2 after being calcined at 900 {sup ∘}C for 30 min, respectively. The magnetic property tests present that the as-prepared spinel ferrite exhibits enhanced magnetic properties with the saturation magnetization (Ms) value of 66.8 emu g{sup − 1} and the coercivity (Hc) value of 26 Oe when the mass ratio was controlled at 1:1:1.2. This research could provide an effective way to transfer two intractable resources into soft magnetic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrothermal synthesis, characterization and composition-dependent magnetic properties of LaFe{sub 1-x}Cr{sub x}O{sub 3} system (0{<=}x{<=}1)

Hydrothermal synthesis, characterization and magnetic properties of a series of ABO{sub 3}-perovskites LaFe{sub 1-x}Cr{sub x}O{sub 3} (0{<=}x{<=}1) are reported. The alkalinity in initial reaction mixtures plays a critical role in controlling the designed stoichiometry of the final compositions. Their magnetic properties are strongly dependent on the compositions and a maximum magnetic moment is found for the sample at x=0.5. Weak ferromagnetic interaction observed for the samples from x=0 to 0.9 arises from the presence of Fe-O-Fe antisymmetric exchange and Fe-O-Cr superexchange interaction. The weak ferromagnetism as well as the linear variation of the lattice parameters implies the possible random distribution of Fe and Cr ions in B sites of the perovskites. The evolution of magnetic ordering transition temperatures has a close relationship with substituent ratios, for the competition of antiferromagnetism and ferromagnetism. The saturated magnetic moment shows a great improvement compared with that for the samples synthesized by solid state method. - Graphical abstract: A series of perovskites LaFe{sub 1-x}Cr{sub x}O{sub 3} (0{<=}x{<=}1) were synthesized by mild hydrothermal method and characterized by their weak ferromagnetism due to the possible random distribution of Fe and Cr ions in B sites of the perovskites. The magnetic property of the perovskites is strongly dependent upon the compositions and a maximum magnetic moment is found for LaFe{sub 1-x}Cr{sub x}O{sub 3} at x=0.5.

36 MATERIALS SCIENCE↗

Effect of RF power on structural and magnetic properties of La doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films

Effect of RF power on structural and magnetic properties of lanthanum (La{sup 3+}) doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films grown on p-Si substrates by radio frequency (RF) magnetron sputtering has studied in this investigation. It is observed that the sputtering power affects the crystalline nature and magnetic properties of grown thin films. X-ray diffraction and Raman spectrum confirms that the Bi{sub 2}Fe{sub 4}O{sub 9} (BFO) thin films were crystallized well with orthorhombic structure. The BFO thin films which was prepared at sputtering power of 100 W have good crystallinity than those prepared at 40 W. The magnetic properties are investigated by vibrating sample magnetometer. The magnetic hysteresis perceptive loop shows that the anti-ferromagnetic behavior of the sample at room temperature. These results confirms that the crystallinity and magnetic properties of the BFO thin films were enhanced at the higher sputtering power (100 W).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of Co{sub 2}{sup 2+}Co{sub 1−} {sub x}{sup 3+}Fe{sub x}{sup 3+}BO{sub 5} (x = 0.10) single crystals with a ludwigite structure

The investigation of mixed Co–Fe ludwigite single crystals shows that their magnetic properties are close to the magnetic properties of Fe{sub 3}BO{sub 5} despite the predominance of cobalt ions. The magnetic properties of Co{sub 3–} {sub x}Fe{sub x}BO{sub 5} single crystals with x = 0.10 are studied in detail. Magnetometric measurements demonstrate a strong magnetic anisotropy with easy magnetization axis b, and the orbital magnetic moment of cobalt is in a frozen state. The detected temperature dependence of the absorption of Mössbauer spectra allowed us to determine the magnetic ordering temperature, which agrees with the results of magnetization measurements (T{sub C} = 84 K).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Mn concentration and atomic structure on the magnetic properties of Ge thin films

This work reports on the magnetic properties of Ge{sub 100-x}Mn{sub x} (x=0-24 at. %) films prepared by cosputtering a Ge+Mn target and submitted to cumulative thermal annealing treatments up to 500 deg. C. Both as-deposited and annealed films were investigated by means of compositional analysis, Raman scattering spectroscopy, magnetic force microscopy, superconducting quantum interference device magnetometry, and electrical resistivity measurements. All as-deposited films (either pure or containing Mn) exhibit an amorphous structure, which changes to crystalline as the annealing treatments are performed at increasing temperatures. In fact, the magnetic properties of the present Ge{sub 100-x}Mn{sub x} films are very sensitive to the Mn content and whether their atomic structure is amorphous or crystalline. More specifically: whereas the amorphous Ge{sub 100-x}Mn{sub x} films (with high x) present a characteristic spin glass behavior at low temperature; after crystallization, the films (with moderate Mn contents) are ferromagnetic at room temperature. Moreover, the magnetic behavior of the films scales with their Mn concentration and tends to be more pronounced after crystallization. Finally, the semiconducting behavior of the films, experienced by previous optical studies, was confirmed through electrical measurements, which also indicate the dependence of the resistivity with the atomic composition of the films.

36 MATERIALS SCIENCE↗

Study of Gd-doped Bi{sub 2}Te{sub 3} thin films: Molecular beam epitaxy growth and magnetic properties

Incorporation of magnetic dopants into topological insulators to break time-reversal symmetry is a prerequisite for observing the quantum anomalous Hall (QAHE) effect and other novel magnetoelectric phenomena. GdBiTe{sub 3} with a Gd:Bi ratio of 1:1 is a proposed QAHE system, however, the reported solubility limit for Gd doping into Bi{sub 2}Te{sub 3} bulk crystals is between ∼0.01 and 0.05. We present a magnetic study of molecular beam epitaxy grown (Gd{sub x}Bi{sub 1–x}){sub 2}Te{sub 3} thin films with a high Gd concentration, up to x ≈ 0.3. Magnetometry reveals that the films are paramagnetic down to 1.5 K. X-ray magnetic circular dichroism at the Gd M{sub 4,5} edge at 1.5 K reveals a saturation field of ∼6 T, and a slow decay of the magnetic moment with temperature up to 200 K. The Gd{sup 3+} ions, which are substitutional on Bi sites in the Bi{sub 2}Te{sub 3} lattice, exhibit a large atomic moment of ∼7 μ{sub B}, as determined by bulk-sensitive superconducting quantum interference device magnetometry. Surface oxidation and the formation of Gd{sub 2}O{sub 3} lead to a reduced moment of ∼4 μ{sub B} as determined by surface-sensitive x-ray magnetic circular dichroism. Their large atomic moment makes these films suitable for incorporation into heterostructures, where interface polarization effects can lead to the formation of magnetic order within the topological insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth process and magnetic properties of α-FeSe nanostructures

Growth process and magnetic properties of PbO-type α-Fe{sub x}Se nanostructures with shape changing from nanocacti to nanopetals and then to nanosheets are investigated. With iron acetylacetonate [Fe(acac){sub 3}] and Se powder as raw materials, the diffusion process of Fe atoms dominates the synthesis of α-Fe{sub x}Se nanocacti following phase transitions from FeSe{sub 2} to Fe{sub 3}Se{sub 4} and finally to α-Fe{sub x}Se. When a mixed solution containing Se precursor and Fe(acac){sub 3} was used as the raw material, the formation of FeSe{sub 2} and Fe{sub 3}Se{sub 4} can be avoided and, bended α-Fe{sub x}Se nanopetals can be prepared at 345 °C, which became flat nanosheets with a [001] preferred orientation as extending the reaction time from 1 to 4 h. No superconducting transition occurs in the α-Fe{sub x}Se (0.84 ≤ x ≤ 1.05) nanostructures due to composition heterogeneity or size effect. Magnetic measurements indicate that an antiferromagnetic component with a Néel point at about 45 K dominates the magnetic properties of the α-Fe{sub 0.87}Se nanosheets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of aluminum substitution on the crystal structure and magnetic properties in Zn{sub 2}Y-type hexaferrites

Crystal structure and magnetic properties of multiferroic Y-type hexaferrites Ba{sub 0.5}Sr{sub 1.5}Zn{sub 2}(Fe{sub 1−x}Al{sub x}){sub 12}O{sub 22} (x = 0, 0.04, 0.08, and 0.12) were investigated. The Z- and M-type impurity phases decrease with increasing Al content, and the pure phase samples can be obtained by modulating Al-doping. Lattice distortion exists in Al-doped samples due to the different radius of Al ion (0.535 Å) and Fe ion (0.645 Å). The microstructural morphologies show that the hexagonal shape grains can be observed in all the samples, and grain size decreases with increasing Al content. As for magnetic properties of Ba{sub 0.5}Sr{sub 1.5}Zn{sub 2}(Fe{sub 1−x}Al{sub x}){sub 12}O{sub 22}, there exist rich thermal- and field-driven magnetic phase transitions. Temperature dependence of zero-field cooling magnetization curves from 5 K to 800 K exhibit three magnetic phase transitions involving conical spin phase, proper-screw spin phase, ferromagnetic phase, and paramagnetic phase, which can be found in all the samples. Furthermore, the phase-transition temperatures can be modulated by varying Al content. In addition, four kinds of typical hysteresis loops are observed in pure phase sample at different temperatures, which reveal different magnetization processes of above-motioned magnetic spin structures. Typically, triple hysteresis loops in low magnetic field range from 0 to 0.5 T can be observed at 5 K, which suggests low-field driven magnetic phase transitions from conical spin order to proper-screw spin order and further to ferrimagnetic spin order occur. Furthermore, the coercive field (H{sub C}) and the saturation magnetization (M{sub S}) enhance with increasing Al content from x = 0 to 0.08, and drop rapidly at x = 0.12, which could be attribute to that in initial Al-doped process the pitch of spin helix increases and therefore magnetization enhances, but conical spin phase eventually collapses in higher-concentration Al-doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The annealing temperature dependences of microstructures and magnetic properties in electro-chemical deposited CoNiFe thin films

CoNiFe thin films with various compositions had been successfully fabricated using electro-chemical deposition method. The crystal structure of Co{sub 65}Ni{sub 15}Fe{sub 20}, Co{sub 62}Ni{sub 15}Fe{sub 23}, and Co{sub 55}Ni{sub 15}Fe{sub 30} thin films was fcc, bcc-fcc mix, and bcc, respectively. The difference crystal structure results the difference in magnetic properties. The saturation magnetic flux density (Bs) of Co{sub 65}Ni{sub 15}Fe{sub 20}, Co{sub 62}Ni{sub 15}Fe{sub 23}, and Co{sub 55}Ni{sub 15}Fe{sub 30} thin films was 1.89 T, 1.93 T, and 2.05 T, respectively. An optimal annealing temperature was determined for controlling the microstructure and magnetic properties of CoNiFe thin films. Depending on annealing temperature, the ratio of bcc and fcc structure varied without changing the film composition. By annealing at temperature of T ≥ 350°C, the intensity ratio of X-ray diffraction peaks for bcc(110) to fcc(111) increased. The increase of phase ratio of bcc(110) to fcc(111) caused the increase of Bs, from 1.89 T to 1.95 T. Coercivity (Hc) also increased after annealing, from 2.6 Oe to 18.6 Oe for fcc phase thin films, from 2.0 Oe to 12.0 Oe for fcc-bcc mix phase thin films, and 7.8 Oe to 8 Oe for bcc phase thin films. The changing crystal structures during annealing process indicated that the thermal treatment at high temperature cause the changing crystallinity and atomic displacement. The TEM bright-field images with corresponding selected-area electron diffraction (SAED) patterns showed that there are strongly effects of thermal annealing on the size of fcc and bcc phase crystalline grain as described by size of individual spot and discontinuous rings. The size of crystalline grains increased by thermal annealing. The evolution of bcc and fcc structures of CoNiFe during annealing is though to be responsible for the change of magnetic properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial Fe-Ge thin films on Ge(111): Morphology, structure, and magnetic properties versus stoichiometry

We have studied the growth and magnetic properties of thin Fe-Ge films synthesized (codeposited at room temperature and postannealed at 250 deg. C) on Ge(111) wafers versus stoichiometry. Morphology and crystal structure have been investigated in situ by means of scanning tunneling microscopy, low-energy electron diffraction, and x-ray photoelectron diffraction and ex situ with x-ray diffraction. The magnetic properties were characterized ex situ by conventional polar and longitudinal magneto-optical Kerr effect and transverse biased initial inverse susceptibility and torque measurements. It is found that the growth is epitaxial for Ge content up to approx48 at. % (approxFe{sub 1.1}Ge composition). In particular, the film is homogeneous and flat and adopts a crystalline structure of hexagonal symmetry derived from the B8{sub 2} (Ni{sub 2}In) structure over a wide stoichiometry range extending from Fe{sub 2}Ge to Fe{sub 1.1}Ge. The epitaxial orientation between the Ge substrate and the germanide layer is (0001)Fe-Ge||(111)Ge with [1120]Fe-Ge||110]Ge. We found however that the surface periodicity and the out-of-plane lattice parameter c evolve within this stoichiometry range and two distinct stoichiometry regimes appear on both sides of a critical stoichiometry (approxFe{sub 1.5}Ge). Indeed, from Fe{sub 2}Ge to Fe{sub 1.5}Ge the surface periodicity is p(2x2) and c continuously decreases with Fe content, whereas from Fe{sub 1.5}Ge to Fe{sub 1.1}Ge the surface periodicity is (sq root(3)xsq root(3))R30 deg. and c remains constant. These features have been interpreted as a clear fingerprint of a minor transformation of the crystalline structure but without any change in symmetry. This structural order transformation is discussed in relation to previous results reported in the case of macroscopic single-crystal Fe-Ge ingots. On both sides of the wide [Fe{sub 2}Ge,Fe{sub 1.1}Ge] composition range the layer is no more homogeneous. More precisely, for higher Fe content the film contains both the above mentioned Ni{sub 2}In-derived phase and a Fe-richer phase (probably bcc Fe) whereas for higher Ge content the layer is amorphous. Magnetic characterization showed in particular that the homogeneous Ni{sub 2}In-derived epilayers are ferromagnetic with a Curie temperature that varies drastically with the stoichiometry, rising up to a high T{sub C} value of approx450 K for the Fe-rich Fe{sub 1.9}Ge composition. Finally, whatever the stoichiometry, the magnetic easy axis of the homogeneous phase lies in the film plane and a small uniaxial anisotropy is superimposed on a sixfold order one that results from the hexagonal symmetry of the crystallographic structure.

36 MATERIALS SCIENCE↗

Effect of Cr and Mn ions on the structure and magnetic properties of GaFeO{sub 3}: Role of the substitution site

Effect of substitution of Cr and Mn in the Fe and Ga sites of GaFeO{sub 3} on the structural parameters and magnetic properties has been investigated by preparing GaFe{sub 1-x}Cr{sub x}(Mn{sub x})O{sub 3} and Ga{sub 1-x}Cr{sub x}(Mn{sub x})FeO{sub 3} starting with appropriate oxide precursors. It is shown that, starting with Cr or Mn substituted Ga{sub 2}O{sub 3}, one obtains Ga{sub 1-x}Cr{sub x}(Mn{sub x})FeO{sub 3}, while reaction of Cr or Mn substituted {alpha}-Fe{sub 2}O{sub 3} with Ga{sub 2}O{sub 3} yields GaFe{sub 1-x}Cr{sub x}(Mn{sub x})O{sub 3}. The structural parameters and magnetic properties vary significantly with the substitution site of Cr showing a large decrease in the unit cell parameters as well as the T{sub C} and other magnetic properties when the substitution is at the octahedral Fe (1, 2) site. Substitution of Cr at the octahedral Ga2 site results in marginal changes. Substitution of Mn in the Ga and Fe sites also show differences although the changes themselves are much smaller. First-principles calculations confirm such site-specificity and show how Cr substitution affects the properties differently when substituted at the Ga2 and Fe1 sites. - Graphical abstract: The important role of site-specific substitution of transition metal ions on the structure and magnetic properties of GaFeO{sub 3} has been investigated experimentally and theoretically. Highlights: > Substitution of transition metal ions to specific cation site. > Ionic radii of the cation dictate the disorder associated with the specific site. > Site-specificity explains magnetic ordering and structural parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural And Magnetic Properties Of Mn-Doped SiC

Structural and magnetic properties of manganese (Mn)-doped silicon carbide (SiC) are investigated. Two Mn-doping methods of 'thermal diffusion' and 'ion implantation' are employed using 4H (hexagonal)- and 3C (cubic)-SiC homoepitaxial wafer as the host material. In the case of 4H-SiC doped using the thermal diffusion method, the extended X-ray absorption fine structure (EXAFS) analysis suggests that most Mn atoms are incorporated on the interstitial site in the 4H-SiC lattice, and a paramagnetic behavior is observed in the magnetization measurement. For the Mn-implanted 3C-SiC, on the other hand, we detect ferromagnetic behaviors and a Curie temperature is found to reach to 245 K.

36 MATERIALS SCIENCE↗

Ironsand (Titanomagnetite-Titanohematite): Chemistry, Magnetic Properties and Direct Applications for Wireless Power Transfer

Ironsand is an abundant and inexpensive magnetic mineral resource. However, the magnetic properties of unprocessed ironsand are often inadequate for any practical applications. In this work, the applicability of ironsand for use as a component in a soft magnetic composite for large-scale inductive power transfer applications was investigated. After magnetic separation, the chemical, structural and magnetic properties of ironsand sourced from different locations were compared. Differences observed in the DC magnetic properties were consistent with changes in the chemical compositions obtained from X-ray Absorption Near-Edge Spectroscopy (XANES), which suggests varying the titanohematite to titanomagnetite content. Increased content in titanomagnetite and magnetic permeability correlated well with the total Fe content in the materials. The best-performing ironsand with the highest permeability and lowest core losses was used alongside Mn,Zn-Ferrite particles (ranging from ~100 μm to 2 mm) to fabricate toroid cores with varying magnetic material loading. It was shown that ironsand can be used to replace up to 15 wt.% of the magnetic materials with minimal impact on the composite magnetic performance, thus reducing the cost. Ironsand was also used as a supporting material in a single-rail wireless power transfer system, effectively increasing the power transfer, demonstrating potential applications to reduce flux leakage.

36 MATERIALS SCIENCE↗

Static and dynamic magnetic properties of epitaxial Co{sub 2}FeAl Heusler alloy thin films

Structural and magnetic properties of epitaxial Co{sub 2}FeAl Heusler alloy thin films were investigated. Films were deposited on single crystal MgO (001XS) substrates at room temperature, followed by an annealing process at 600 deg. C. MgO and Cr buffer layers were introduced in order to enhance crystalline quality, and improve magnetic properties. Structural analyses indicate that samples have grown in the B2 ordered epitaxial structure. VSM measures show that the MgO buffered sample displays a magnetization saturation of 1010 {+-} 30 emu/cm{sup 3}, and Cr buffered sample displays a magnetization saturation of 1032 {+-} 40 emu/cm{sup 3}. Damping factor was studied by strip-line ferromagnetic resonance measures. We observed a maximum value for the MgO buffered sample of about 8.5 x 10{sup -3}, and a minimum value of 3.8 x 10{sup -3} for the Cr buffered one.

36 MATERIALS SCIENCE↗