Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Long”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Long-term observations of cloud condensation nuclei over the Amazon rain forest - Part 2: Variability and characteristics of biomass burning, long-range transport, and pristine rain forest aerosols

For this study, size-resolved measurements of atmospheric aerosol and cloud condensation nuclei (CCN) concentrations and hygroscopicity were conducted over a full seasonal cycle at the remote Amazon Tall Tower Observatory (ATTO, March 2014–February 2015). In a preceding companion paper, we presented annually and seasonally averaged data and parametrizations (Part 1; Pöhlker et al., 2016a). In the present study (Part 2), we analyze key features and implications of aerosol and CCN properties for the following characteristic atmospheric conditions: Empirically pristine rain forest (PR) conditions, where no influence of pollution was detectable, as observed during parts of the wet season from March to May. The PR episodes are characterized by a bimodal aerosol size distribution (strong Aitken mode with D Ait ≈ 70nm and N Ait ≈ 160cm -3 , weak accumulation mode with D acc ≈ 160nm and N acc ≈ 90cm -3 ), a chemical composition dominated by organic compounds, and relatively low particle hygroscopicity (κ Ait ≈ 0.12, κ acc ≈ 0.18). Long-range-transport (LRT) events, which frequently bring Saharan dust, African biomass smoke, and sea spray aerosols into the Amazon Basin, mostly during February to April. The LRT episodes are characterized by a dominant accumulation mode ( DAit ≈ 80nm, N Ait ≈ 120cm -3 vs. D acc ≈ 180nm, N acc ≈ 310cm -3 ), an increased abundance of dust and salt, and relatively high hygroscopicity (κ Ait ≈ 0.18, κ acc ≈ 0.35). The coarse mode is also significantly enhanced during these events. Biomass burning (BB) conditions characteristic for the Amazonian dry season from August to November. The BB episodes show a very strong accumulation mode (D Ait ≈ 70nm, N Ait ≈ 140cm -3 vs. D acc ≈ 170nm, N acc ≈ 3400cm -3 ), very high organic mass fractions (~90%), and correspondingly low hygroscopicity (κ Ait ≈ 0.14, κ acc ≈ 0.17). Mixed-pollution (MPOL) conditions with a superposition of African and Amazonian aerosol emissions during the dry season. During the MPOL episode presented here as a case study, we observed African aerosols with a broad monomodal distribution (D ≈ 130nm, N CN, 10 ≈ 1300cm -3 ), with high sulfate mass fractions (~20%) from volcanic sources and correspondingly high hygroscopicity (κ < 100 nm ≈ 0.14, κ > 10 nm ≈ 0.22), which were periodically mixed with fresh smoke from nearby fires (D ≈ 110nm, N CN, 10 ≈ 2800cm -3 ) with an organic-dominated composition and sharply decreased hygroscopicity (κ < 150 nm ≈ 0.10, κ > 150 nm ≈ 0.20). Insights into the aerosol mixing state are provided by particle hygroscopicity (κ) distribution plots, which indicate largely internal mixing for the PR aerosols (narrow κ distribution) and more external mixing for the BB, LRT, and MPOL aerosols (broad κ distributions). The CCN spectra (CCN concentration plotted against water vapor supersaturation) obtained for the different case studies indicate distinctly different regimes of cloud formation and microphysics depending on aerosol properties and meteorological conditions. The measurement results suggest that CCN activation and droplet formation in convective clouds are mostly aerosol-limited under PR and LRT conditions and updraft-limited under BB and MPOL conditions. Normalized CCN efficiency spectra (CCN divided by aerosol number concentration plotted against water vapor supersaturation) and corresponding parameterizations (Gaussian error function fits) provide a basis for further analysis and model studies of aerosol–cloud interactions in the Amazon.

54 ENVIRONMENTAL SCIENCES↗

Long-term measurements of ice nucleating particles at Atmospheric Radiation Measurement (ARM) sites worldwide

Ice nucleating particles (INPs) play a critical role in cloud microphysics and precipitation formation, yet long-term, spatially extensive observational datasets remain limited. Here, we present one of the most comprehensive publicly available datasets of immersion-mode INP concentrations using a single analytical method, generated through the U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) user facility. INP filter samples have been collected across a broad range of environments – including agricultural plains, Arctic coastlines, high-elevation mountain sites, marine regions, and urban areas – via fixed observatories, mobile facility deployments, and vertically-resolved tethered balloon system operations. We describe the standardized processing and quality assurance pipeline, from filter collection and processing using the Ice Nucleation Spectrometer to final data products archived on the ARM Data Discovery portal. The dataset includes both total INP concentrations and selectively treated samples, allowing for classification of biological, organic, and inorganic INP types. It features a continuous 5-year record of INP measurements from a central U.S. site, with data collection still ongoing. Seasonal and site-specific differences in INP concentrations are illustrated through intercomparisons at −10 and −20 °C, revealing distinct regional sources and atmospheric drivers. We also outline mechanisms for researchers to access existing data, request additional sample analyses, and propose future field campaigns involving ARM INP measurements. This dataset supports a wide range of scientific applications, from observational and mechanistic studies to model development, and provides critical constraints on aerosol-cloud interactions across diverse atmospheric regimes (Creamean et al., 2024, 2020b; https://doi.org/10.5439/1770816).

Creamean, Jessie M. [Colorado State Univ., Fort Co↗

A long-range and long-life telemetry data-acquisition system for heart rate and multiple body temperatures from free-ranging animals

The system includes an implantable transmitter, external receiver-retransmitter collar, and a microprocessor-controlled demodulator. The size of the implant is suitable for animals with body weights of a few kilograms or more; further size reduction of the implant is possible. The ECG is sensed by electrodes designed for internal telemetry and to reduce movement artifacts. The R-wave characteristics are then specifically selected to trigger a short radio frequency pulse. Temperatures are sensed at desired locations by thermistors and then, based on a heartbeat counter, transmitted intermittently via pulse interval modulation. This modulation scheme includes first and last calibration intervals for a reference by ratios with the temperature intervals to achieve good accuracy even over long periods. Pulse duration and pulse sequencing are used to discriminate between heart rate and temperature pulses as well as RF interference.

Lund, G. F.↗

The Mars Hopper: a radioisotope powered, impulse driven, long-range, long-lived mobile platform for exploration of Mars

Planetary exploration mission requirements are becoming more demanding. Due to the increasing cost, the missions that provide mobile platforms that can acquire data at multiple locations are becoming more attractive. Wheeled vehicles such as the MER rovers have proven extremely capable but have very limited range and cannot traverse rugged terrain. Flying vehicles such as balloons and airplanes have been proposed but are problematic due to the very thin atmospheric pressure and the strong, dusty winds present on Mars. The Center for Space Nuclear Research has designed an instrumented platform that can acquire detailed data at hundreds of locations during its lifetime - a Mars Hopper. The Mars Hopper concept utilizes energy from radioisotopic decay in a manner different from any existing radioisotopic power sources—as a thermal capacitor. By accumulating the heat from radioisotopic decay for long periods, the power of the source can be dramatically increased for short periods. The platform will be able to "hop" from one location to the next every 5-7 days with a separation of 5-10 km per hop. Preliminary designs show a platform that weighs around 52 kgs unfueled which is the condition at deployment. Consequently, several platforms may be deployed on a single launch from Earth. With sufficient lifetime, the entire surface of Mars can be mapped in detail by a couple dozen platforms. In addition, Hoppers can collect samples from all over the planet, including gorges, mountains and crevasses, and deliver them to a central location for eventual pick-up by a Mars Sample Return mission. The status of the Mars Hopper development project at the CSNR is discussed.

99 GENERAL AND MISCELLANEOUS↗

Scalable Dry Printing Manufacturing to Enable Long-Life and High Energy Lithium-Ion Batteries

Slurry casting method dominates the electrode manufacture of lithium-ion batteries. The entire procedure is similar to the newspaper printing that includes premixing of cast materials into solvents homogeneously, and continuously transferring and drying the slurry mixture onto the current collector. As a market approaching US $80 billion by 2024, the optimization of manufacture process is crucial and attractive. However, the organic solvent remains irreplaceable in the wet method for making slurries, even though it is capital-intensive and toxic. In this paper, an advanced powder printing technique is demonstrated that is completely solvent-free and dry. Through removing the solvent and related procedures, this method is anticipated to statistically save 20% of the cost at a remarkably shortened production cycle (from hours to minutes). The dry printed electrodes outperform commercial slurry cast ones in 650 cycles (80% capacity retention in 500 cycles), and thick electrodes are successfully fabricated to increase the energy density. Furthermore, microscopy techniques are utilized to characterize the difference of electrode microstructure between dry and wet methods, and distinguish dry printing's advantages on controlling the microstructure. Finally, this study proves a practical fabrication method for lithium-ion electrodes with lowered cost and favorable performance, and allows more advanced electrode designs potentially.

25 ENERGY STORAGE↗

K-Long Facility for JLab and its Scientific Potential

Our main interest in creating a secondary high-quality KL-beam is to investigate hyperon spectroscopy through both formation and production processes. We propose to study two-body reactions induced by the KL-beam on the proton target. The experiment should measure both differential cross sections and self-analyzed polarizations of the produced Λ-, Σ-, and Ξ-hyperons using the GlueX detector at the Jefferson Lab Hall D. New data will greatly constrain partial-wave analysis and reduce modeldependent uncertainties in the extraction of strange resonance properties, providing a new benchmark for comparisons with QCD-inspired models and LQCD calculations. The measurements will span c.m. cos θ from -0.95 to 0.95 in c.m. range above W = 1490 MeV and up to 4000 MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Encapsulating Various Sulfur Allotropes within Graphene Nanocages for Long-Lasting Lithium Storage

The encapsulation of sulfur within carbon matrices is widely utilized in the cathode of a rechargeable lithium-sulfur battery, whose energy density largely depends on the design of the carbon structure. Here, an advanced graphene nanocage structure with the capability of hosting both cyclo-S-8 and smaller sulfur molecules (S2-4) is reported. The cage inner cavity is partially filled with S-8 to form a yolk-shell structure that enables free volumetric variation of S-8 during (de)lithiation. In the graphene shell of the cage, S-8 are downsized to S2-4 to activate extra sulfur loading sites within graphene layers. Importantly, the graphene shell exhibits inward volumetric variation upon (de)lithiation of the loaded S2-4, and the overall electrode strain is thus minimized. This prototyped design promises an ultimate solution to maximize sulfur loading in carbon matrices as well as to circumvent the polysulfide dissolution problem and boost the commercialization of lithium-sulfur batteries in the future.

Yuan, Yifei↗

Long Cycle Life, Low Self-Discharge Sodium-Selenium Batteries with High Selenium Loading and Suppressed Polyselenide Shuttling

The utilization of selenium as a cathode in rechargeable sodium–selenium batteries is hampered by low Se loading, inferior electrode kinetics, and polyselenide shuttling between the cathode and anode. Here a high-performance sodium–selenium cell is presented by coupling a binder-free, self-interwoven carbon nanofiber–selenium cathode with a light-weight carbon-coated bifunctional separator. With this strategy, electrodes with a high Se mass loading (4.4 mg cm -2 ) render high reversible capacities of 599 mA h g -1 at 0.1C rate and 382 mA h g -1 at 5C rate. In addition, this novel cell offers good shelf-life with a low self-discharge, retaining 93.4% of its initial capacity even after resting for six months. As evidenced by experimental and density functional theory analysis, the remarkable dynamic (cycle life) and static (shelf-life) stabilities originate from the high electrical conductivity, improved Na-ion accessibility through the 3D interconnected open channels, and highly restrained polyselenide shuttle. The findings demonstrate the viability of high-performance sodium–selenium batteries with high selenium loading.

25 ENERGY STORAGE↗

A Comprehensive Analysis of the Interphasial and Structural Evolution over Long–Term Cycling of Ultrahigh–Nickel Cathodes in Lithium–Ion Batteries

Ultrahigh-Ni layered oxides hold great promise as high-energy-density cathodes at an affordable cost for lithium-ion batteries, yet their practical application is greatly hampered by the poor cyclability. Herein, by employing LiNi 0.94 Co 0.06 O 2 as a model cathode in a full-cell configuration, the interphasial and structural evolution processes of ultrahigh-Ni layered oxides are systematically investigated over the course of their service life (1500 cycles). By applying advanced analytic techniques (e.g., Li-isotope labeling, region-of-interest method), the dynamic chemical evolution on the cathode surface is revealed with spatial resolution, and the correlation between lattice distortion and cathode surface reactivity is established. Benefiting from in situ X-ray diffraction (XRD) analysis, the ultrahigh-Ni layered oxide is demonstrated to undergo dual-phase reaction mechanisms with huge lattice variation, which leads to a decrease in crystallinity and secondary particle pulverization. Furthermore, the critical impact of cathode surface reaction on the graphite anode–electrolyte interphase (AEI) is revealed at nanometer scale, and a universal chemical/physical evolution process of the AEI is illustrated, for the first time. Finally, the practical viability of ultrahigh-Ni layered oxides is demonstrated through Al-doping strategy. Finally, this work presents a comprehensive understanding of the structural and interphasial degradation of ultrahigh-Ni layered oxide cathodes for developing high-energy-density lithium-ion batteries.

25 ENERGY STORAGE↗