Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Local mixing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Mixing efficiency in heterodyne systems

How the spatial distributions of the signal and local oscillator fields affect the heterodyne signal to noise ratio is examined for both a single detector and an array of detectors. For an array, the distribution of gain among the intermediate frequency (i.f.) amplifiers is included. The emphasis is on understanding why the distributions are important and what is the key to maximizing the signal to noise ratio in any system. It is shown that for a single detector, the highest signal to noise ratio is obtained with a local oscillator (LO) distribution the same as that of the signal. For an array, the product of the i.f. gain times the LO field at each detector has the same distribution as that of the signal field.

Fink, D.↗

The Yearly Variation in Fall-Winter Arctic Winter Vortex Descent

Using the change in HALOE methane profiles from early September to late March, we have estimated the minimum amount of diabatic descent within the polar which takes place during Arctic winter. The year to year variations are a result in the year to year variations in stratospheric wave activity which (1) modify the temperature of the vortex and thus the cooling rate; (2) reduce the apparent descent by mixing high amounts of methane into the vortex. The peak descent amounts from HALOE methane vary from l0km -14km near the arrival altitude of 25 km. Using a diabatic trajectory calculation, we compare forward and backward trajectories over the course of the winter using UKMO assimilated stratospheric data. The forward calculation agrees fairly well with the observed descent. The backward calculation appears to be unable to produce the observed amount of descent, but this is only an apparent effect due to the density decrease in parcels with altitude. Finally we show the results for unmixed descent experiments - where the parcels are fixed in latitude and longitude and allowed to descend based on the local cooling rate. Unmixed descent is found to always exceed mixed descent, because when normal parcel motion is included, the path average cooling is always less than the cooling at a fixed polar point.

Schoeberl, Mark R.↗

Mixing and chemical reaction in sheared and nonsheared homogeneous turbulence

Direct numerical simulations were made to examine the local structure of the reaction zone for a moderately fast reaction between unmixed species in decaying, homogeneous turbulence and in a homogeneous turbulent shear flow. Pseudospectral techniques were used in domains of 64 exp 3 and higher wavenumbers. A finite-rate, single step reaction between non-premixed reactants was considered, and in one case temperature-dependent Arrhenius kinetics was assumed. Locally intense reaction rates that tend to persist throughout the simulations occur in locations where the reactant concentration gradients are large and are amplified by the local rate of strain. The reaction zones are more organized in the case of a uniform mean shear than in isotropic turbulence, and regions of intense reaction rate appear to be associated with vortex structures such as horseshoe vortices and fingers seen in mixing layers. Concentration gradients tend to align with the direction of the most compressive principal strain rate, more so in the isotropic case.

Leonard, Andy D.↗

Further improvements of a new model for turbulent convection in stars

The effects of including a variable molecular weight and of using the newest opacities of Rogers and Iglesias (1991) as inputs to a recent model by Canuto and Mazzitelli (1991) for stellar turbulent convection are studied. Solar evolutionary tracks are used to conclude that the the original model for turbulence with mixing length Lambda = z, Giuli's variable Q unequal to 1 and the new opacities yields a fit to solar T(eff) within 0.5 percent. A formulation of Lambda is proposed that extends the purely nonlocal Lambda = z expression to include local effects. A new expression for Lambda is obtained which generalizes both the mixing length theory (MLT) phenomenological expression for Lambda as well as the model Lambda = z. It is argued that the MLT should now be abandoned.

Canuto, V. M.↗

An integral turbulent kinetic energy analysis of free shear flows

Mixing of coaxial streams is analyzed by application of integral techniques. An integrated turbulent kinetic energy (TKE) equation is solved simultaneously with the integral equations for the mean flow. Normalized TKE profile shapes are obtained from incompressible jet and shear layer experiments and are assumed to be applicable to all free turbulent flows. The shear stress at the midpoint of the mixing zone is assumed to be directly proportional to the local TKE, and dissipation is treated with a generalization of the model developed for isotropic turbulence. Although the analysis was developed for ducted flows, constant-pressure flows were approximated with the duct much larger than the jet. The axisymmetric flows under consideration were predicted with reasonable accuracy. Fairly good results were also obtained for the fully developed two-dimensional shear layers, which were computed as thin layers at the boundary of a large circular jet.

Peters, C. E.↗

Shallow drilling in the 'Bunte Breccia' impact deposits, Ries Crater, Germany

The paper is a field report concerning a shallow core drilling program in the multicolored breccia deposits which constitute 90% of all the impact breccias beyond the outer rim of the Ries, a 26-km-diam impact crater. About 480 m of core was recovered from 11 locations with radial ranges between 16.5 and 35 km from the crater center. The cores consist of breccias, whose components are derived from the crater itself and the terrain outside the crater. The local components dominate the breccias at the larger ranges, and possibly constitute more than 90% of the breccia volume at the greatest distances investigated. The great depth of the Bunte Breccia (84 m at 27 km range), together with the preponderance of local components, necessitates an emplacement mechanism that ploughed up and mixed the crater surroundings to depths greater than 50 m.

Hoerz, F.↗

Reactive mixing in swirling flows

The effect of swirl on the mixing of two gas streams of the same density and axial velocity in a coaxial annular geometry has been examined. The flow is studied via a fluorescent tracer, 2-3 biacetyl. Through direct excitation, collisional excitation, and collisional de-excitation of the tracer, the turbulent transport, molecularly mixed and unmixed regions in the flow are visualized. The visualization results indicate that there are interesting three dimensional inviscid large scale structures. Mixing in the molecular level is found to be mainly localized in these structures.

Cheng, W. K.↗

The prediction of noise radiation from supersonic elliptic jets

This paper describes the prediction of noise radiation from supersonic elliptic jets. The noise is associated with the large scale structures in the jet mixing layer. These structures are described as instability waves. The local characteristics of the instability waves are determined from a compressible, linear, analysis. The jet mean velocity and density are described in elliptic cylindrical coordinates. The local eigensolution for the instability waves is determined from a finite difference solution of the non-separable boundary value problem. This inner solution which is formulated in terms of the method of multiple scales is matched with the radiated field using the method of matched asymptotic expansions. The form of the far-field directivity is derived. Predictions are presented for the noise radiation by the several modes of instability in the elliptic jet. The radiated field is not axisymmetric and certain modes radiate strongly in the directions of the major and minor axes of the jet. The extension of the present work to other geometries and flow fields is discussed.

Morris, Philip J.↗

Mid-course multi-target tracking using continuous representation

The thrust of this paper is to present a new approach to multi-target tracking for the mid-course stage of the Strategic Defense Initiative (SDI). This approach is based upon a continuum representation of a cluster of flying objects. We assume that the velocities of the flying objects can be embedded into a smooth velocity field. This assumption is based upon the impossibility of encounters in a high density cluster between the flying objects. Therefore, the problem is reduced to an identification of a moving continuum based upon consecutive time frame observations. In contradistinction to the previous approaches, here each target is considered as a center of a small continuous neighborhood subjected to a local-affine transformation, and therefore, the target trajectories do not mix. Obviously, their mixture in plane of sensor view is apparent. The approach is illustrated by an example.

Zak, Michail↗

Comparison of AGE and Spectral Methods for the Simulation of Far-Wakes

Turbulent flow simulation methods based on finite differences are attractive for their simplicity, flexibility and efficiency, but not always for accuracy or stability. This report demonstrates that a good compromise is possible with the Advected Grid Explicit (AGE) method. AGE has proven to be both efficient and accurate for simulating turbulent free-shear flows, including planar mixing layers and planar jets. Its efficiency results from its localized fully explicit finite difference formulation (Bisset 1998a,b) that is very straightforward to compute, outweighing the need for a fairly small timestep. Also, most of the successful simulations were slightly under-resolved, and therefore they were, in effect, large-eddy simulations (LES) without a sub-grid-scale (SGS) model, rather than direct numerical simulations (DNS). The principle is that the role of the smallest scales of turbulent motion (when the Reynolds number is not too low) is to dissipate turbulent energy, and therefore they do not have to be simulated when the numerical method is inherently dissipative at its resolution limits. Such simulations are termed 'auto-LES' (LES with automatic SGS modeling) in this report.

Bisset, D. K.↗

Mixing Dynamics Induced by Traveling Magnetic Fields

Microstructural and compositional homogeneity in metals and alloys can only be achieved if the initial melt is homogeneous prior to the onset of solidification processing. Naturally induced convection may initially facilitate this requirement but upon the onset of solidification significant compositional variations generally arise leading to undesired segregation. Application of alternating magnetic fields to promote a uniform bulk liquid concentration during solidification processing has been suggested. To investigate such possibilities an initial study of using traveling magnetic fields (TMF) to promote melt homogenization is reported in this work. Theoretically, the effect of TMF-induced convection on mixing phenomena is studied in the laminar regime of flow. Experimentally, with and without applied fields, both: mixing dynamics by optically monitoring the spreading of an initially localized dye in transparent fluids and, compositional variations in metal alloys have been investigated.

Grugel, Richard N.↗

Mixing Dynamics Induced by Traveling Magnetic Fields

Microstructural and compositional homogeneity in metals and alloys can only be achieved if the initial melt is homogeneous prior to the onset of solidification processing. Naturally induced convection may initially facilitate this requirement but upon the onset of solidification significant compositional variations generally arise leading to undesired segregation. Application of alternating magnetic fields to promote a uniform bulk liquid concentration during solidification processing has been suggested. To investigate such possibilities an initial study of using traveling magnetic fields (TMF) to promote melt homogenization is reported in this work. Theoretically, the effect of TMF-induced convection on mixing phenomena is studied in the laminar regime of flow. Experimentally, with and without applied fields, both 1) mixing dynamics by optically monitoring the spreading of an initially localized dye in transparent fluids and, 2) compositional variations in metal alloys have been investigated.

Grugel, Richard N.↗

Dynamical Response of Mediterranean Precipitation to Greenhouse Gases and Aerosols

Atmospheric aerosols and greenhouse gases affect cloud properties, radiative balance and, thus, the hydrological cycle. Observations show that precipitation has decreased in the Mediterranean since the beginning of the 20th century, and many studies have investigated possible mechanisms. So far, however, the effects of aerosol forcing on Mediterranean precipitation remain largely unknown. Here we compare the modeled dynamical response of Mediterranean precipitation to individual forcing agents in a set of global climate models (GCMs). Our analyses show that both greenhouse gases and aerosols can cause drying in the Mediterranean and that precipitation is more sensitive to black carbon (BC) forcing than to well-mixed greenhouse gases (WMGHGs) or sulfate aerosol. In addition to local heating, BC appears to reduce precipitation by causing an enhanced positive sea level pressure (SLP) pattern similar to the North Atlantic Oscillation-Arctic Oscillation, characterized by higher SLP at midlatitudes and lower SLP at high latitudes. WMGHGs cause a similar SLP change, and both are associated with a northward diversion of the jet stream and storm tracks, reducing precipitation in the Mediterranean while increasing precipitation in northern Europe. Though the applied forcings were much larger, if forcings are scaled to those of the historical period of 1901-2010, roughly one-third (31+/-17%) of the precipitation decrease would be attributable to global BC forcing with the remainder largely attributable to WMGHGs, whereas global scattering sulfate aerosols would have negligible impacts. Aerosol-cloud interactions appear to have minimal impacts on Mediterranean precipitation in these models, at least in part because many simulations did not fully include such processes; these merit further study. The findings from this study suggest that future BC and WMGHG emissions may significantly affect regional water resources, agricultural practices, ecosystems and the economy in the Mediterranean region.

Tang, Tao↗

Impact of Resolution and Parameterized Convection on the Diurnal Cycle of Precipitation in a Global Nonhydrostatic Model

A series of 40-day non-hydrostatic global simulations was run with the NASA Goddard Earth Observing System (GEOS) model with horizontal grid spacing ranging from 50 km to 3.5 km. Here we evaluate the diurnal cycle of precipitation and organized convection as a function of resolution. For validation we use the TRMM 3B42 and IMERG precipitation products and 4 km Merged Infrared brightness temperature, focusing on three regions: the contiguous United States (CONUS), the Maritime Continent, and Amazonia. We find that higher resolution has mixed impacts on diurnal phase. Regions dominated by non-local propagating convection show the greatest improvement, with better representation of organized convective systems. Precipitation in regions dominated by local thermodynamic forcing tends to peak too early at high resolution. Diurnal amplitudes in all regions develop unrealistic small-scale variability at high resolution, while amplitudes tend to be underestimated at low resolution. The GEOS model uses the Grell-Freitas scale-aware convection scheme, which smoothly reduces parameterized deep convection with increasing resolution. We find that some parameterized convection is beneficial for the diurnal amplitude and phase even with a 3.5 km model grid, but only when throttled with the scale-aware approach. An additional 3.5 km experiment employing the GFDL microphysics scheme and higher vertical resolution shows further improvement in propagating convection, but an earlier rainfall peak in locally forced regions.

Nathan P. Arnold↗

Multiple Probe Measurements at Uranus Motivated By Spatial Variability

Motivation: Spatial variations in the temperature field and composition of Uranus' atmosphere demonstrate a need for multiple entry probes to characterize vertical profiles in multiple locations. We will review variation of composition and temperature, which are produced by dynamical processes on a range of scales from global (polar anomalies, zonal bands) to regional (vortices, storms) [1–2]. In particular, the spatial variation of convective activity is not well understood based on existing remote sensing observations [3]. Understanding how these processes operate, and how they modulate variable composition, is key to constraining bulk atmospheric abundances. Abundances in turn provide cosmochemical constraints on planetary origins. Secondary probes at Uranus: Key measurements for secondary probes are temperature-pressure profiles, along with compositional profiles. Radio occultations are limited to shallow levels less than ~2 bar [4]. In situ temperature-pressure measurements (or atmospheric structure measurements) can unambiguously extend these results to deeper levels. Measurements with vertical resolution of at least 2 km are needed to characterize anomalies like the 1.2-bar feature from the Voyager 2 occultation at 2–6° S [4], which supports a range of temperature gradients depending on assumptions of composition. Simultaneous measurements of temperature, pressure, and composition are key to understanding this class of features. Species such as methane, hydrogen sulfide, and ammonia must be measured along a probe descent profile because they vary over several orders of magnitude due to the strong temperature dependence of their saturation vapor pressures [e.g., 5]. Results of these measurements can be interpreted to understand the potential for moist convective activity in the atmosphere. Lessons from the other giant planets: On Jupiter, the Galileo Probe's entry into a meteorologically distinct five-micron hot spot led many to interpret the local composition as column-stretched, so that well-mixed abundances were reached at deeper levels than in surrounding, unperturbed regions [6–8]. Ground-based microwave measurements and Juno data now indicate that the deep depletion of ammonia is a very widespread atmospheric characteristic not limited to 5-µm hot spots [9–11]. But in the absence of multiple probes, we do not know if the other volatiles H2S and H2O behave in the same way. The open questions for the Jupiter case strongly motivate sending multiple probes to Uranus. On Saturn, retrievals of NH3 and PH3 abundances at shallow levels vary with latitude [12], but it is unknown how deep these differences extend, which is why a Saturn probe (or probes) was a mission theme for NASA's New Frontiers 4 and 5 opportunities [13]. Challenges for secondary probes: Cost is an issue due to the perception that it involves sacrifices to other mission elements. Spacecraft trajectories may be constrained by needs for orbit insertion that limit probe deliveries to different latitudes, and additional limitations may be placed on communication windows for probe descent phases (particularly if multiple probes are released from the orbiter simultaneously) [14]. Finally, composition sensors for miniature secondary probes are not at the required technological maturity [15]. Mass spectrometers are typically too large, massive, and powerhungry, while smaller nanosensors are only beginning to be developed for planetary missions. Finally, the need for probe survival heating is most easily met by radioisotope heat sources, but these require regulatory approvals that are even more difficult to satisfy compared to standard environmental reviews [16], unless the secondary probe is designed as a core element of a mission. References: [1] Molter E.M., et al. (2021) PSJ, 2, 3. [2] Rowe-Gurney N., et al. (2021) Icar, 365, 114506. [3] Hueso R., Sánchez-Lavega A. (2019) SSRv, 215, 52. [4] Lindal G.F., et al. (1987) JGR, 92, 14987– 15001. [5] Simon A.A., et al. (2022) RemS, 14, 1518. [6] Atreya, S.K., et al. (1997) in The Three Galileos: The Man, the Spacecraft, the Telescope, pp. 249–260 (C. Barbieri et al., eds.). [7] Showman A.P., Ingersoll A.P. (1998) Icar, 132, 205–220. [8] Friedson A.J. (2005) Icar, 177, 1–17. [9] de Pater I., et al. (2001) Icar, 149, 66–78. [10] Li C., et al. (2017) GeoRL, 44, 5317–5325. [11] de Pater I., et al. (2019) Icar, 322, 168–191. [12] Fletcher L.N., et al. (2009) Icar, 202, 543–564. [13] National Research Council (2011) Vision and Voyages. [14] Sayanagi K.M., et al. (2020) SSRv, 216, 72. [15] Wong M.H. et al. (2021) BAAS, 53, 486. [16] Zide A., Mendoza-Hill A., Cheney D. (2022) COSPAR Abstracts H0.6-0012-22.

Michael H Wong↗

Shock recovery analogs and the origin of mesosiderites

The origin of mesosiderites, which consist of approximately equal-weight proportions of Fe-Ni metal and silicates (gabbros, basalts, orthopyroxenites, dunites), remains an interesting and complex problem in meteoritics. There is general agreement that multiple impact events were probably involved in the formation of these brecciated stony-iron meteorites, but given the heterogeneity of mesosiderites, additional processes have been invoked to explain the unique and intricate textural and compositional makeup of mesosiderites. We conducted a series of shock recovery experiments to test the impact event(s) scenario. The results indicated significant similarities between the shocked analogs and many mesosiderites. We have compared our analogs with a suite of thin sections of Barea mesosiderite. I have conducted a series of flash heating experiments in which equal-weight proportions of gabbro and stainless steel (SS304) powders were compressed into small charges and heated under reducing conditions for short times. These experiments were used to bracket localized, peak postshock temperatures in our analog shots and to compare the mixing relations between the silicate and metal. The shock recovery experiments used porous metal-silicate powder starting mixtures, therefore our experiments are most analogous to an impact scenario where the target is an asteroidal regolith surface composed of a loose mixture of Fe-Ni metal and heterogeneous silicates. Analog experiments may really describe a secondary impact process similar to the late-stage, localized impact melting event. This leaves one of the crucial questions about mesosiderite genesis unanswered, namely what is the source of the Fe-Ni metal that is so intimately distributed in these meteorites?

Rowan, L. R.↗

Amorphous Phases on the Surface of Mars

Both primary (volcanic/impact glasses) and secondary (opal/silica, allophane, hisingerite, npOx, S-bearing) amorphous phases appear to be major components of martian surface materials based on orbital and in-situ measurements. A key observation is that whereas regional/global scale amorphous components include altered glass and npOx, local scale amorphous phases include hydrated silica/opal. This suggests widespread alteration at low water-to-rock ratios, perhaps due to snow/ice melt with variable pH, and localized alteration at high water-to-rock ratios. Orbital and in-situ measurements of the regional/global amorphous component on Mars suggests that it is made up of at least three phases: npOx, amorphous silicate (likely altered glass), and an amorphous S-bearing phase. Fundamental questions regarding the composition and the formation of the regional/global amorphous component(s) still remain: Do the phases form locally or have they been homogenized through aeolian activity and derived from the global dust? Is the parent glass volcanic, impact, or both? Are the phases separate or intimately mixed (e.g., as in palagonite)? When did the amorphous phases form? To address the question of source (local and/or global), we need to look for variations in the different phases within the amorphous component through continued modeling of the chemical composition of the amorphous phases in samples from Gale using CheMin and APXS data. If we find variations (e.g., a lack of or enrichment in amorphous silicate in some samples), this may imply a local source for some phases. Furthermore, the chemical composition of the weathering products may give insight into the formation mechanisms of the parent glass (e.g., impact glasses contain higher Al and lower Si [30], so we might expect allophane as a weathering product of impact glass). To address the question of whether these phases are separate or intimately mixed, we need to do laboratory studies of naturally altered samples made up of mixed phases (e.g., palagonite) and synthetic single phases to determine their short-range order structures and calculate their XRD patterns to use in models of CheMin data. Finally, to address the timing of the alteration, we need to study rocks on the martian surface of different ages that may contain glass (volcanic or impact) with MSL and future rovers to better understand how glass alters on the martian surface, if that alteration mechanism is universal, and if alteration spans across long periods of time or if there is a time past which unaltered glass remains.

Rampe, E. B.↗

Effects of gravity on sheared and nonsheared turbulent nonpremixed flames

The present numerical study is concerned with the fundamental physics of the multiway interaction between turbulence, chemical reaction, and buoyancy in a nonpremixed flame. The method of direct numerical simulation (DNS) is used to solve the instantaneous, three-dimensional governing equations. Because of the present supercomputer limitations, we consider two simple flow geometries, namely an initially uniform flow without shear (equivalent to grid-generated turbulence) and an initially uniform shear flow. In each flow, the fuel and oxidant initially exist as two separate streams. As the reactants mix, chemical reaction takes place and exothermic energy is released causing variations in density. In the presence of a gravity field, the spatial and temporal distributions of the induced buoyancy forces depend on the local density gradients and the direction of the gravitational acceleration. The effects of buoyancy include the generation of local shear, baroclinic production or destruction of vorticity, and countergradient heat and mass transport. Increased vorticity and small-scale turbulence promote further mixing and reaction. However, if the strain-rates become too high, local flame extinction can occur. Our objective is to gain an understanding of the complex interactions between the physical phenomena involved, with particular attention to the effects of buoyancy on the turbulence structure, flame behavior, and factors influencing flame extinction.

Elghobashi, Said↗