Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Layered materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Ultralight Weight Optical Systems Using Nano-Layered Synthesized Materials

Optical imaging is important for many NASA science missions. Even though complex optical systems have advanced, the optics, based on conventional glass and mirrors, require components that are thick, heavy and expensive. As the need for higher performance expands, glass and mirrors are fast approaching the point where they will be too large, heavy and costly for spacecraft, especially small satellite systems. NASA Langley Research Center is developing a wide range of novel nano-layered synthesized materials that enable the development and fabrication of ultralight weight optical device systems that enable many NASA missions to collect science data imagery using small satellites. In addition to significantly reducing weight, the nano-layered synthesized materials offer advantages in performance, size, and cost.

Clark, Natalie↗

Aperiodic multilayers with enhanced reflectivity for extreme ultraviolet lithography

We have developed novel aperiodic multilayers, covered by capping layers resistant to environmental attack, that offer superior performance for extreme ultraviolet lithography. We have designed these coatings using an optimization procedure based on an algorithm able to acquire domain knowledge inside the space of possible solutions. An integrated intensity increase of up to 2.18 times that obtained using standard periodic multilayers has been estimated. The aperiodic structures have minimal absorption in the topmost layers, which makes them especially insensitive to both the choice of capping layer material and any subsequent capping layer degradation due to oxidation or contamination. This property allows for the use of the most resilient capping layer materials available, thereby leading to a significantly improved lifetime. We have produced prototype capped aperiodic coatings and have measured their performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solar cell contact formation using laser ablation

The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline material layer; and forming conductive contacts in the plurality of contact holes.

14 SOLAR ENERGY↗

Solar cell contact formation using laser ablation

The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline material layer; and forming conductive contacts in the plurality of contact holes.

14 SOLAR ENERGY↗

Solar cell contact formation using laser ablation

The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline material layer; and forming conductive contacts in the plurality of contact holes.

14 SOLAR ENERGY↗

Solar cell having a plurality of conductive contacts

The formation of solar cell contacts using a laser is described. A method of fabricating a back-contact solar cell includes forming a poly-crystalline material layer above a single-crystalline substrate. The method also includes forming a dielectric material stack above the poly-crystalline material layer. The method also includes forming, by laser ablation, a plurality of contacts holes in the dielectric material stack, each of the contact holes exposing a portion of the poly-crystalline material layer; and forming conductive contacts in the plurality of contact holes.

Harley, Gabriel↗

Multifunctional Effect of Fe Substitution in Na Layered Cathode Materials for Enhanced Storage Stability

In this study, developing stable cathode materials that are resistant to storage degradation is essential for practical development and industrial processing of Na-ion batteries, as many sodium layered oxide materials are susceptible to hygroscopicity and instability when exposed to ambient air. Among the various layered compounds, Fe-substituted O 3 -type Na(Ni 1/2 Mn 1/2 ) 1-x Fe x O 2 materials have emerged as a promising option for high-performance and low-cost cathodes. While previous reports have noted the decent air-storage stability of these materials, the role and origin of Fe substitution in improving storage stability remain unclear. In this study, we investigate the air resistant effect of Fe substitution in O 3 -Na(Ni 1/2 Mn 1/2 ) 1-x Fe x O 2 cathode materials by performing systematic surface and structural characterizations. We find that the improved storage stability can be attributed to the multifunctional effect of Fe substitution, which forms a surface protective layer containing an Fe-incorporated spinel phase and decreases the thermodynamical driving force for bulk chemical sodium extraction. With these mechanisms, the Fe-containing cathodes can suppress the cascades of cathode degradation processes and better retain the electrochemical performance after air storage.

25 ENERGY STORAGE↗

Dye and pigment-free structural colors and angle-insensitive spectrum filters

Optical spectrum filtering devices displaying minimal angle dependence or angle insensitivity are provided. The filter comprises a localized plasmonic nanoresonator assembly having a metal material layer defining at least one nanogroove and a dielectric material disposed adjacent to the metal material layer. The dielectric material is disposed within the nanogroove(s). The localized plasmonic nanoresonator assembly is configured to funnel and absorb a portion of an electromagnetic spectrum in the at least one nanogroove via localized plasmonic resonance to generate a filtered output having a predetermined range of wavelengths that displays angle insensitivity. Thus, flexible, high efficiency angle independent color filters having very small diffraction limits are provided that are particularly suitable for use as pixels for various display devices or for use in anti-counterfeiting and cryptography applications. The structures can also be used for colored print applications and the elements can be rendered as pigment-like particles.

36 MATERIALS SCIENCE↗

System and method for roll-to-roll film tensioning for reduced separation force during bottom-up stereolithography

The present disclosure relates to a tensioning system for use in a stereolithography manufacturing application. The system may have a build plate for supporting a three dimensional part being formed using a photo responsive resin, a base plate and a release element extending over the base plate. The release element is configured to receive a quantity of photo responsive resin for forming a new material layer of the three dimensional part. A pair of tensioning components are secured to opposite ends of the release element, and apply a controlled tension force to the release element during peeling of the release element to reduce a separation force required to separate the release element from the new material layer after the new material layer is cured.

Duoss, Eric B.↗

Method for enhanced additive manufacturing

Systems and methods are disclosed for manufacturing a three dimensional (3D) part. In one implementation a system in accordance with the present disclosure may make use of an additive manufacturing (AM) subsystem for performing an AM operation to form the 3D part. The 3D part may be formed using a plurality of distinct material layers layered one on top of another. The system may also involve at least one of a laser peening (LP) subsystem and a High Velocity Laser Accelerated Deposition (HVLAD) subsystem. The LP subsystem may be used for laser peening a selected subquantity of the layers, to impart improved hardness to the selected subquantity of the layers and/or to the overall 3D part. The HVLAD subsystem may be used to bond at least one of the material layers to a previously laid down one of the material layers.

42 ENGINEERING↗

Injection molded component

An intermediate component includes a first wall member, a leachable material layer, and a precursor wall member. The first wall member has an outer surface and first connecting structure. The leachable material layer is provided on the first wall member outer surface. The precursor wall member is formed adjacent to the leachable material layer from a metal powder mixed with a binder material, and includes second connecting structure.

42 ENGINEERING↗

Atomic-scale friction modulated by potential corrugation in multi-layered graphene materials

Friction is an important issue that has to be carefully treated for the fabrication of graphene-based nano-scale devices. So far, the friction mechanism of graphene materials on the atomic scale has not yet been clearly presented. Here, first-principles calculations were employed to unveil the friction behaviors and their atomic-scale mechanism. We found that potential corrugations on sliding surfaces dominate the friction force and the friction anisotropy of graphene materials. Higher friction forces correspond to larger corrugations of potential energy, which are tuned by the number of graphene layers. The friction anisotropy is determined by the regular distributions of potential energy. The sliding along a fold-line path (hollow-atop-hollow) has a relatively small potential energy barrier. Thus, the linear sliding observed in macroscopic friction experiments may probably be attributed to the fold-line sliding mode on the atomic scale. These findings can also be extended to other layer-structure materials, such as molybdenum disulfide (MoS{sub 2}) and graphene-like BN sheets.

36 MATERIALS SCIENCE↗

Stabilized Lithium, Manganese-Rich Layered Cathode Materials Enabled by Integrating Co-Doping and Nanocoating

While lithium, manganese-rich (LMR) layered oxide cathode materials offer high energy density (>900 Wh kg –1 ) and low cost, LMR is susceptible to continuous capacity and voltage decay from the oxygen migration and side reaction with aqueous electrolyte at high voltage. Herein, the integration of Na/F co-doping (CD) and AlF 3 coating on LMR is achieved without the need of complex atomic layer deposition. Akin to pristine and CD samples, CD with 1 wt % AlF 3 (CD-1.0 wt %) shows excellent electrochemical performance with the capacity and voltage retentions of 93 and 91% after 150 cycles at 0.5C, respectively, and increased ionic conductivity. Spectroscopic analysis indicates that the coating mainly influences the Co distribution, where Co is enriched on the surface, and partial diffusion of Al 3+ ions toward the bulk, leading to a slight change of transition-metal (TM) valence states at the nanometer scale and the formation of a stable Li x (CoAl)O y phase. Post-cycling analysis reveals that CD-1.0 wt % can alleviate the formation of rock-salt structure and Mn dissolution. Besides, little to no metal segregation is detected for the cycled CD-1.0 wt % sample. This finding presents the first instance to apply co-doping and AlF 3 coating as a new strategy to enhance the structural homogeneity and takes another step toward their commercial viability.

25 ENERGY STORAGE↗

Indefinite materials

A compensating multi layer material includes two compensating layers adjacent to one another. A multi-layer embodiment of the invention produces subwavelength near-field focusing, but mitigates the thickness and loss limitations of the isotropic “perfect lens”. An antenna substrate comprises an indefinite material.

Smith, David R.↗

Two-dimensional material based layer transfer (2DLT) for low-cost, high-throughput, high-efficiency solar cells

The objective of this project is to develop two-dimensional material-based layer transfer (2DLT) for high-efficiency, low-cost III-V solar cells. More specifically, in short term, the team will develop 2DLT for cost-cost, high-throughput GaAs single-junction solar cells. The team will develop ultraclean high yield graphene transfer on GaAs and optimize the remote homoepitaxy process to obtain dislocation-free single-crystalline GaAs on graphene whose crystalline quality is identical to that of the GaAs wafer [1,2]. The team will develop the 2DLT process for a solar cell with highest achievable efficiency. The team will also strive to target GaAs solar cells with efficiency of 25~29% before and after the transfer, and reuse the substrate multiple times without CMP by damage-free transfer process enabled by 2DLT. Our team is partnered with industrial collaborators to obtain World record efficiency of flexible GaAs solar cells. Once the concept is fully realized for the GaAs solar cells, the team will expand the concept for multiple-junction solar cell targeting 35% efficiency with the 2DLT process in other projects.

14 SOLAR ENERGY↗

Indefinite materials

A compensating multi layer material includes two compensating layers adjacent to one another. A multi-layer embodiment of the invention produces sub-wavelength near-field focusing, but mitigates the thickness and loss limitations of the isotropic “perfect lens.” An antenna substrate comprises an indefinite material.

Smith, David R.↗

High-resolution parallel-detection sensor array using piezo-phototronics effect

A pressure sensor element includes a substrate, a first type of semiconductor material layer and an array of elongated light-emitting piezoelectric nanostructures extending upwardly from the first type of semiconductor material layer. A p-n junction is formed between each nanostructure and the first type semiconductor layer. An insulative resilient medium layer is infused around each of the elongated light-emitting piezoelectric nanostructures. A transparent planar electrode, disposed on the resilient medium layer, is electrically coupled to the top of each nanostructure. A voltage source is coupled to the first type of semiconductor material layer and the transparent planar electrode and applies a biasing voltage across each of the nanostructures. Each nanostructure emits light in an intensity that is proportional to an amount of compressive strain applied thereto.

42 ENGINEERING↗