Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LINE WIDTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

UVSP/SMM observations of transition region oscillations in sunspots

Using Ultraviolet Spectrometer and Polarimeter data obtained in emission lines formed at temperatures of 70,000 K to 130,000 K, transition region oscillations in sunspots have been observed. The frequency of these oscillations lies in the range 5.8 mHz to 7.8 mHz. Their regular appearance in line-of-sight velocity and their frequent occurrence in intensity in phase with maximum blue shift leads to the interpretation of the oscillations as upward-propagating acoustic waves. The presence in two of the C IV wavelength 1548.19 time series of a phase-shifted oscillation in the line width may be caused by the presence of unidentified blends in the line wings. The energy flux carried by the umbral acoustic waves is less than 2000 erg/sq cm/s, some seven orders of magnitude smaller than the missing radiative flux of sunspots.

Gurman, J. B.↗
NASA NTRS1984

NGC 7213 - A key to the nature of liners?

New optical spectra of the nearby S0 galaxy NGC 7213 are analyzed. The observations are described and a brief overview of the spectrum is given. The subtraction of the stellar component is presented, and the measurement of various emission lines is discussed in detail. Important physical parameters are derived, including those pertaining to atomic data, line widths, physical conditions, geometry and kinematics, the Balmer decrement, and ultraviolet emission lines. The Seyfert characteristics of NGC 7213 are reviewed, and the galaxy's shock features are reconciled with photoionization models. The presented arguments may apply to classical liners as well. Theoretical models that can help explain the relationships discovered among the emission lines are examined.

Filippenko, A. V.↗
NASA NTRSDate not supplied

Process Recipes for Additively Printed Copper Ink Flexible Circuits using Direct Write Methods

In this paper, the process-recipes and process-performance relationships for additive-printing of copper circuits using direct-write methods have been studied. The process has been implemented on the direct write platform. Interest in the use of additive printing methods for the manufacture of micro-circuits has grown immensely in recent times. Direct write methods have been shown to have the ability to create circuits in a limited manner. However, the process recipes and the effect of process parameters on the manufactured properties are not well understood. Copper ink is a good and cost-effective alternative to silver ink but its use has lagged owing to an increased propensity for oxidation. In this paper, photonic curing has been used to sinter copper ink to make the traces conductive. The method flashes high energy light that sinter metal particles instantaneously and the temperature of the substrate remains low. The effect of the different photonic sintering profiles on the mechanical and electrical properties of the printed traces has been studied in this paper.The print process parameters also play an important role in the line width and height that has been studied to print with the desired line profile for the end application. An LC filter circuit is been printed with SMD components been attached using an electrically conductive adhesive (ECA). The manufactured flexible LC filter is been tested for its frequency sweep to compare with the commercially available LC filer with the help of the Bode plot.

Process control↗
NASA NTRS1984

A high resolution spectroscopic study of the oxygen molecule

A high resolution spectrometer which incorporates a narrow line width tunable dye laser was used to make absorption profiles of 57 spectral lines in the Oxygen A-Band at pressures up to one atmosphere in pure O2. The observed line profiles are compared to the Voigt, and a collisionally narrowed, profile using a least squares fitting procedure. The collisionally narrowed profile compares more favorable to the observed profiles. Values of the line strengths and self broadening coeffiencients, determined from the least square fitting process, are presented in tabular form. It is found that the experssion by Watson are in closest agreement with the experimentally determined strengths. The self broadening coefficients are compared with the measurements of several other investigators.

Ritter, K. J.↗
NASA NTRS1990

Line broadening of Mg X 609 and 625 A coronal emission lines observed above the solar limb

A University of Colorado sounding rocket experiment on March 17, 1988, provided high-resolution EUV spectra along a solar diameter and out to 1.2 solar radius with spatial resolution of 20 x 60 arcsec. Each spectrum contains transition region and coronal emission lines in the wavelength range 605-635 A and 1210-1270 A, including the emission lines Mg X 609 and 625 A, Fe XII 1242 A, O V 629 A, N V 1238 and 1242 A, corresponding to a wide range of temperatures of formation. Increased line broadening is observed above the limb for all lines, and this effect is illustrated by presenting observed line widths as a function of height above the limb for the higher temperature lines Mg X 609 and 625 A. On the basis of calculations, the most likely cause of the increased broadening above the limb appears to be the presence of hydromagnetic waves in the corona.

Hassler, Donald M.↗
NASA NTRS1994

The broad emission line and continuum variations of Seyfert galaxies. 2: Broad-line region structure and kinematics

Spectroscopic observations of 13 Seyfert 1 galaxies made from 1979 to 1984 at Palomar and Steward Observatories were analyzed for H beta line profile variations. Significant profile changes were detected in five galaxies. These variations are often associated with changes in continuum and/or H beta strength, suggesting a causal connection between variations in the continuum source and changes in emission-line profiles. Moreover, the overall strength of H beta line flux variations is strongly correlated with line width in the far wings, whereas no such correlation was found in the line core. This finding is consistent with previous observations (Shuder 1982) which suggest that higher velocity gas lies closer to the central continuum source, since this inner gas would be expected to track variations more closely. In each of the five galaxies in which H beta line profile variations were detected, particularly NGC 5548 and Mrk 6, only two distinct line profile shapes were observed. Since intermediate profile types were not detected, the transition from one type to the other must occur rapidly (within a few months). These rapid line profile variations are thus consistent with numerous other studies which strongly point to a small broad-line region (BLR) size in Seyfert galaxies. Observational models of BLR kinematics and structure for each of the galaxies in the present sample are presented. Line asymmetries suggest that radial motions exist in the BLRs of most of these objects. Chaotic motions also appear to be quite common. However, evidence for rotational motion was observed in only one case. A model that is consistent with the majority of this sample incorporates both radial and chaotic motions combined with some form of external obscuration such as an optically and geometrically thick torus.

Rosenblatt, Edward I.↗
NASA NTRS1994

The HST quasar absorption line key project. 9: An emission-line study of PG 2251+113

We present Hubble Space Telescope (HST) and quasi-simultaneous ground-based observations of the z = 0.3252 QSO PG 2251+113. We find a correlation between line widths and the critical density for de-excitation of the forbidden emission lines observed in this object. We can show that this correlation also applies to the semiforbidden and possibly also the permitted lines which arise in the broad emission-line region. While this result was predicted from statistical studies, it has never previously been shown to hold in detail in any individual object. This relationship between the narrow and broad emission-line regions may help constrain dynamical models of both regions. We examine the implications of this result for a simple radial infall model of the emitting gas developed to explain the origin of narrow-line profiles.

Espey, Brian R.↗
NASA NTRS1983

The thermal structure of the atmospheric surface boundary layer on Mars as modified by the radiative effect of aeolian dust

A computational simulation, based on Mariner 9 data, was performed for the thermal characteristics of the Martian atmospheric surface boundary layer in clear and dust-filled conditions. A radiative transfer model consisting of the atmospheric enthalpy rate equation, the radiative flux integrated over the 0.2-50 microns, the solid angle interval, and 0.50 km altitudes, broken into 52 levels. Mariner 9 IR data for CO2 absorption lines were included in the form of a temperture-dependent equation, while the line-widths were interpreted in terms of the pressure dependene as well as temperature. The lines covered the regions from 1-50 microns and varying conditions of dust content in the atmosphere. Attention was given to the thermal coupling between the ground and the atmosphere. It was found that convective heat exchange develops quickly due to radiative heating of the Martian desert surface, but does not cool the surface because of the attenuated atmosphere. The model predictd the 100 K temperature variations in the dusty atmosphere, as observed by the Viking thermal mapper. It is suggested that radiative flux convergence is as important as convection at equivalent efficiencies.

Pallmann, A. J.↗
NASA NTRS1999

GHRS Observations of Cool, Low-Gravity Stars: The Outer Atmosphere and Wind of the Nearby K Supergiant Lambda Velorum - 5

UV spectra of lambda Velorum taken with the Goddard High Resolution Spectrograph (GHRS) on the Hubble Space Telescope are used to probe the structure of the outer atmospheric layers and wind and to estimate the mass-loss rate from this K5 lb-II supergiant. VLA radio observations at lambda = 3.6 cm are used to obtain an independent check on the wind velocity and mass-loss rate inferred from the UV observations, Parameters of the chromospheric structure are estimated from measurements of UV line widths, positions, and fluxes and from the UV continuum flux distribution. The ratios of optically thin C II] emission lines indicate a mean chromospheric electron density of log N(sub e) approximately equal 8.9 +/- 0.2 /cc. The profiles of these lines indicate a chromospheric turbulence (v(sub 0) approximately equal 25-36 km/s), which greatly exceeds that seen in either the photosphere or wind. The centroids of optically thin emission lines of Fe II and of the emission wings of self-reversed Fe II lines indicate that they are formed in plasma approximately at rest with respect to the photosphere of the star. This suggests that the acceleration of the wind occurs above the chromospheric regions in which these emission line photons are created. The UV continuum detected by the GHRS clearly traces the mean flux-formation temperature as it increases with height in the chromosphere from a well-defined temperature minimum of 3200 K up to about 4600 K. Emission seen in lines of C III] and Si III] provides evidence of material at higher than chromospheric temperatures in the outer atmosphere of this noncoronal star. The photon-scattering wind produces self-reversals in the strong chromospheric emission lines, which allow us to probe the velocity field of the wind. The velocities to which these self-absorptions extend increase with intrinsic line strength, and thus height in the wind, and therefore directly map the wind acceleration. The width and shape of these self-absorptions reflect a wind turbulence of approximately equal 9-21 km/s. We further characterize the wind by comparing the observations with synthetic profiles generated with the Lamers et al. Sobolev with Exact Integration (SEI) radiative transfer code, assuming simple models of the outer atmospheric structure. These comparisons indicate that the wind in 1994 can be described by a model with a wind acceleration parameter beta approximately 0.9, a terminal velocity of 29-33 km/s, and a mass-loss rate approximately 3 x 10(exp -9) solar M/yr. Modeling of the 3.6 cm radio flux observed in 1997 suggests a more slowly accelerating wind (higher beta) and/or a higher mass-loss rate than inferred from the UV line profiles. These differences may be due to temporal variations in the wind or from limitations in one or both of the models. The discrepancy is currently under investigation.

Carpenter, Kenneth G.↗
NASA NTRS1979

Deep photospheric flows in Tau Scorpii

From analysis of weak, unblended, ultraviolet lines observed in Tau Scorpii by Copernicus, the same line widths and the same slightly blue-depressed wings as found in the upper photospheric lines of the visual region are found. In addition, a radial-velocity discrepancy of about 6 km/s between weak and strong lines in the 1000-1300-A region is found. These results are in quantitative agreement with one another and with the results of the visual region. They imply that a flow of material is present even in the deep photosphere of this star. However, one cannot yet specify the geometry of the flow (outward-radial versus temperature-weighted convection columns). At the least, this flow alters the expected radiation-driven flow solution close to the photosphere. At the most, it could provide the heating of a chromosphere or a corona just outside the photosphere, as required by the imperfect flow model.

Smith, M. A.↗
NASA NTRS1985

Pulsed excimer laser processing

The status of pulsed excimer laser processing of PV cells is presented. The cost effective feasibility of fabricating high efficiency solar cells on Czochralski wafers using a pulsed excimer laser for junction formation, surface passivation, and front metallization. Laser annealing results were promising with the best AR coated cell having an efficiency of 16.1%. Better results would be expected with larger laser spot size because there was some degradation in open circuit voltage caused by laser spot overlap and edge effects. Surface heating and photolytic decomposition by the laser was used to deposit tungsten from the reaction of tungsten hexafluoride and hydrogen. The line widths were 5 to 10 mils, and the depositions passed the tape adhesion test. Thinner lines are practical using an optimized optical system.

Wong, D.↗
NASA NTRS1989

The penultimate supernova in the Large Magellanic Cloud - SNR 0540-69.3

Spectra of the SNR 0540-69.3 in the LMC are presented that cover the wavelength interval 3500-9800 A. An optical continuum is observed over this entire wavelength range from synchrotron emission near the 50 ms pulsar inside the remnant. The spectrum contains emission lines shifted by + 370 km/s from the local LMC rest velocity. The line widths average 2735 + or - 200 km/s, indicating an expansion age of 762 + or - 50 yr. Lines of forbidden O I, forbidden O II, forbidden O III, forbidden S II, forbidden S III, forbidden Ar III, forbidden Ni II, forbidden Fe II, forbidden Fe III, and H-alpha are detected, and forbidden Fe V and forbidden Fe VII may be detected. It is very likely that the object is the young SNR following core collapse of a massive star akin to the progenitor of SN 1987A.

Kirshner, Robert P.↗
NASA NTRS2010

Uncertainties Associated with Theoretically Calculated N2-Broadened Half-Widths of H2O Lines

With different choices of the cut-offs used in theoretical calculations, we have carried out extensive numerical calculations of the N2-broadend Lorentzian half-widths of the H2O lines using the modified Robert-Bonamy formalism. Based on these results, we are able to thoroughly check for convergence. We find that, with the low-order cut-offs commonly used in the literature, one is able to obtain converged values only for lines with large half-widths. Conversely, for lines with small half-widths, much higher cut-offs are necessary to guarantee convergence. We also analyse the uncertainties associated with calculated half-widths, and these are correlated as above. In general, the smaller the half-widths, the poorer the convergence and the larger the uncertainty associated with them. For convenience, one can divide all H2O lines into three categories, large, intermediate, and small, according to their half-width values. One can use this division to judge whether the calculated half-widths are converged or not, based on the cut-offs used, and also to estimate how large their uncertainties are. We conclude that with the current Robert- Bonamy formalism, for lines in category lone can achieve the accuracy requirement set by HITRAN, whereas for lines in category 3, it 'is impossible to meet this goal.

Ma, Q.↗
NASA NTRS1988

Spectroscopic evidence supporting the gravitational lens hypothesis for 1635+267 A,B

The gravitational lens hypothesis is tested for 1613+267 A,B by comparing the detailed line widths and shapes of the 2799-A Mg II and semiforbidden 1909-A C-III lines in each component. Following subtraction of an interpolating polynomial fit to the continua and the determination of a single optimum scaling factor (an amplification ratio of 2.83), reasonable agreement between the profiles of both lines in the two composites is obtained. Comparison of these lines to those in an unrelated quasar with a similar redshift and apparent magnitude does not produce a good match. It is suggested that the observed match in the 1635+267 A,B spectra arises from gravitational lensing.

Turner, Edwin L.↗
NASA NTRS1988

Measurements of argon-, helium-, hydrogen-, and nitrogen-broadened widths of methane lines near 9000 per cm

Pressure-broadened widths of rotational-vibrational lines in CH4 have been measured at very high spectral resolution in the R-branch of the 3nu3 overtone. The broadening gases were Ar, He, H2, and N2. Results are presented as averages for J-multiplets at ambient temperature. The overall values (per cm per atm) for these R-branch lines are 0.0651 (CH4-Ar), 0.0508 (CH4-He), 0.0728 (CH4-H2), and 0.0715 (CH4-N2).

Fox, Kenneth↗