Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIMITER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Cosmological limits on the neutrino mass sum for beyond-Λ⁢ CDM models

The sum of neutrino masses can be measured cosmologically, as the sub-eV particles behave as “hot” dark matter whose main effect is to suppress the clustering of matter compared to a universe with the same amount of purely cold dark matter. Current astronomical data provide an upper limit on ∑𝑚 𝜈 between 0.07–0.12 eV at 95% confidence, depending on the choice of data. This bound assumes that the cosmological model is Λ Cold Dark Matter (Λ⁢ CDM), where dark energy is a cosmological constant, the spatial geometry is flat, and the primordial fluctuations follow a pure power law. Here, we update studies on how the mass limit degrades if we relax these assumptions. To existing data from the Planck satellite we add new gravitational lensing data from the Atacama Cosmology Telescope, the new Type Ia supernova sample from the Pantheon+survey, and baryonic acoustic oscillation (BAO) measurements from the Sloan Digital Sky Survey and the Dark Energy Spectroscopic Instrument. Using our fiducial data combination, described in the appendix, we find the neutrino mass limit is stable to most model extensions, with such extensions degrading the limit by less than 10%. We find a broadest bound of ∑𝑚 𝜈 < 0.19 eV at 95% confidence for a model with dynamical dark energy, although this scenario is not statistically preferred over the simpler Λ ⁢CDM model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Thermal Modeling and Limitations for Power Electronics Embedded in Medium-Voltage Cables

As next-generation energy technologies gain traction and power demand increases, the existing electrical infrastructure faces significant stress, prompting innovative solutions to enhance the grid's capacity and lifespan. This work explores the possibility of embedding medium-voltage (MV) power electronics directly inline with the cable, and the resulting thermal challenges. Since the majority of power distribution cables installed in the U.S. are passively cooled, the work focuses primarily on passive cooling, with an emphasis on the limitations of axial heat spreading within the cable. To date, literature on axial spreading of high incident heat loads on cables and cable environments is limited, typically reporting cases with <10 W of incident heat load. This work will explore the considerations, limits, and tradeoffs of cable-embedded heat loads significantly larger than the cable losses. Both external and internal effects are modeled analytically in nondimensional terms via a Biot number analysis, allowing fundamental limits and tradeoffs to be derived. The work culminates in the design and experimental validation of a cable-embedded thermal system capable of passively dissipating 300 W of heat from a coaxial SiC mosfet switch module over a length of 20 cm, thus validating the possibility of MV cable-embedded power electronics from a thermal standpoint.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Criteria for Grid-Forming Inverters Transitioning Between Current Limiting Mode and Normal Operation

Here, this letter focuses on the fault recovery analysis of inverters using multi-loop droop based grid-forming control, taking into account different current limiting strategies. A criterion is proposed to determine when the inverter can exit the current limiting mode after fault clearance. The theoretical findings are verified through electromagnetic transient simulations using the direct (d)-axis priority-based current limiting method, circular current limiting method, and virtual impedance method.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Nutrient limitation shapes functional traits of mycorrhizal fungi and phosphorus-cycling bacteria across an elevation gradient

In nutrient-limited high-elevation ecosystems, plants rely on arbuscular mycorrhizal (AM) fungi to provide mineral phosphorus (P) in the form of phosphate (PO43-). AM fungi gather these nutrients from phosphorus-cycling bacteria (PCBs) that can mineralize PO43- from organic matter and solubilize mineral-bound P. How climate, soil factors, and nutrient limitation influence AM fungi and PCB assembly remains unclear. We collected soil from montane meadows across a 1,000-m elevation gradient on three replicate mountainsides and analyzed AM fungal marker genes, P-cycling genes from shotgun metagenomes, and edaphic measurements. High-elevation soils had nearly 50-fold less soil PO₄³⁻ and 60% more AM fungal hyphae than low-elevation soils. AM fungal turnover was linked to changes in pH, organic carbon, and PO₄³-. The composition of 198 P-cycling genes was influenced by the AM fungal community structure. Drivers of individual PCB functional genes, including pH and organic carbon, varied with gene phylogeny. We found a trade-off in P-cycling strategies across elevation: P-rich, low-elevation soils supported root-colonizing AM fungi and organic P-mineralizing bacteria. P-poor, high-elevation soils were dominated by stress-tolerant AM fungi and mineral P-solubilizing bacteria. Our results suggest that AM fungi and PCB community turnover across elevation are both shaped by pH, organic carbon, and P availability. With continued climate warming, the structure and function of mountaintop ecosystems might shift to resemble lower elevations, disrupting long-established and specialized microbial assemblages, with consequences for P-cycling dynamics and the total P available to plant communities.IMPORTANCEPhosphorus (P) limits plant productivity in high-elevation ecosystems, yet the microbial networks that mobilize P, including arbuscular mycorrhizal (AM) fungi and phosphorus-cycling bacteria (PCBs), remain under-characterized in these nutrient-poor soils. We show that across a 10,00-m elevation gradient, AM fungi and P-cycling gene assemblages shift predictably with pH, organic carbon, and phosphate availability. Higher elevations, with less available P, select for stress-tolerant AM fungal taxa and PCB strategies geared toward mineral solubilization, while low-elevation sites favor root colonization by AM fungi and organic P mineralization. These results suggest that nutrient limitation can constrain microbial community assembly in consistent ways across landscapes. High mountain soils are low in P and rely on a network of underground AM fungi and PCB to deliver nutrients to plants. This study shows how those underground relationships reorganize with elevation and how climate change could collapse long-standing microbial strategies by pushing high-elevation ecosystems toward lowland conditions. As soils warm and dry, the microbial scaffolding that supports alpine plant life may become increasingly unstable.

arbuscular mycorrhizal fungi↗
DOE OSTI2024

Fundamental bandwidth limits and shaping of frequency-modulated combs

Frequency-modulated (FM) combs based on active cavities like quantum cascade lasers have recently emerged as promising light sources in many spectral regions. Unlike passive modelocking, which generates amplitude modulation using the field’s amplitude, FM comb formation relies on the generation of phase modulation from the field’s phase. They can therefore be regarded as a phase-domain version of passive modelocking. However, while the ultimate scaling laws of passive modelocking have long been known—Haus showed in 1975 that pulses modelocked by a fast saturable absorber have a bandwidth proportional to effective gain bandwidth—the limits of FM combs have been much less clear. Here, we show that FM combs based on fast gain media are governed by the same fundamental limits, producing combs whose bandwidths are linear in the effective gain bandwidth. Not only do we show theoretically that the diffusive effect of gain curvature limits comb bandwidth, but we also show experimentally how this limit can be increased. By adding carefully designed resonant-loss structures that are evanescently coupled to the cavity of a terahertz laser, we reduce the curvature and increase the effective gain bandwidth of the laser, demonstrating bandwidth enhancement. Our results can better enable the creation of active chip-scale combs and be applied to a wide array of cavity geometries.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

The Delicate Balance Redux: The Role of Nuclear Forces, Damage Limitation and Uncertainty in Future U.S.-China Crises

What is the impact of damage limitation capabilities like counterforce and missile defenses on deterrence, when their efficacy in stopping an adversary nuclear attack is uncertain? This is a key unanswered question to understand “how much is enough” for the United States to deter China and Russia in future nuclear crises. In this paper we extend an established, single move game theory model to capture the dynamics of two players in a nuclear crisis having varying damage limitation capabilities with uncertain effectiveness. Our model formalizes the logic of the “delicate balance” school of deterrence, which states that leverage in a crisis is driven by the risk each player can take with their combined strategic forces, and that those risks carry uncertainty as nuclear forces are hard to deliver against technologically advanced adversaries. Our model shows that damage limitation capabilities—even those with significant uncertainty around them like cyber or electronic warfare—can drive bargaining outcomes in an array of nuclear crises. We then apply these bargaining outcomes to the expected U.S.-China strategic balance as China builds out its nuclear force through 2035. We apply published force exchange models to determine the expected damage each side will be able to deliver, and we use these values to determine the likelihood that the U.S. can prevail in crises of varying stakes. Last, we show that U.S. policymakers have an array of options to improve future bargaining outcomes, evaluating how additional nuclear forces trade against improvements in damage limitation.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Impact of Limited Degree of Freedom Drag Coefficients on a Floating Offshore Wind Turbine Simulation

The worldwide effort to design and commission floating offshore wind turbines (FOWT) is motivating the need for reliable numerical models that adequately represent their physical behavior under realistic sea states. However, properly representing the hydrodynamic quadratic damping for FOWT remains uncertain, because of its dependency on the choice of drag coefficients (dimensionless or not). It is hypothesized that the limited degree of freedom (DoF) drag coefficient formulation that uses only translational drag coefficients causes mischaracterization of the rotational DoF drag, leading to underestimation of FOWT global loads, such as tower base fore-aft shear. To address these hydrodynamic modeling uncertainties, different quadratic drag models implemented in the open-source mid-fidelity simulation tool, OpenFAST, were investigated and compared with the experimental data from the Offshore Code Comparison Collaboration, Continued, with Correlation (OC5) project. The tower base fore-aft shear and up-wave mooring line tension were compared under an irregular wave loading condition to demonstrate the effects of the different damping models. Two types of hydrodynamic quadratic drag formulations were considered: (1) member-based dimensionless drag coefficients applied only at the translational DoF (namely limited-DoF drag model) and (2) quadratic drag matrix model (in dimensional form). Based on the results, the former consistently underestimated the 95th percentile peak loads and spectral responses when compared to the OC5 experimental data. In contrast, the drag matrix models reduced errors in estimates of the tower base shear peak load by 7–10% compared to the limited-DoF drag model. The underestimation in the tower base fore-aft shear was thus inferred be related to mischaracterization of the rotational pitch drag and the heave motion/drag by the limited-DoF model.

17 WIND ENERGY↗
DOE OSTI2024

The Isotopic Limit of Recycling

Despite advances in recycling technologies and practices, the world still mostly operates on a once-through materials use cycle. The once-through approach to the materials supply chain cannot work into perpetuity. The vast majority of current recycling efforts focus on mechanical or chemical separation-based techniques and are often subsequently limited on the number of times a component can be recycled or upcycled. By looking at things from a particle physics and nuclear history perspective, we propose a thought experiment to determine the physical limit of recycling and propose subsequent limits and standards to evaluate all recycling efforts. This uncommon approach to analysis demonstrates that the current limits to recycling are not physical in nature but engineering.

Lang, Eric↗
DOE OSTI2025

Limits on the Low-energy Electron Antineutrino Flux from the Brightest Gamma-Ray Burst of All Time

The electron antineutrino flux limits are presented for the brightest gamma-ray burst (GRB) of all time, GRB221009A, over a range of 1.8–200 MeV using the Kamioka Liquid Scintillator Antineutrino Detector. Using multiple time windows ranging from minutes to days surrounding the event to search for electron antineutrinos coincident with the GRB, we set an upper limit on the flux under the assumption of several power-law neutrino source spectra, with power-law indices ranging from 1.5 to 3 in steps of 0.5. No excess was observed in any time windows ranging from seconds to days around the event trigger time T 0 . For a power-law index of 2 and a time window of T 0 ± 500 s, a flux upper limit of 2.34 × 10 9 cm −2 was calculated. The limits are compared to the results presented by IceCube.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1970

Remote sensing for detection of soil limitations in agricultural areas

Automatic analysis of soil limitations studied by an automatic color TV density slicing system was accomplished. This system color codes the density range of the value component of color of an image. Maps of soil limitations or other similar soil groups are produced by photographing the color coded representation of an area. The planimeter feature of the density slicing system measures the area of each soil limitation providing information on the importance of a soil limitation in an area. The results of this study suggest that an automatic color TV density slicing system has great potential not only for identifying and mapping similar soil areas, but also for indicating the percentage composition of an area.

Frazee, C. J.↗
NASA NTRS1973

Determination and evaluation of performance limit criteria of fast-response electrohydraulic servosystems

Limit criteria for determining the dynamic performance capabilities of high performance, fast-response (greater than 100 Hz) electrohydraulic servosystems are presented. A detailed analysis of the maximum load locus of these systems is used as a basis for the derivation of improved limit criteria. These criteria predict the maximum performance limits caused by system nonlinearities and physical limitations. The criteria are applied to experimental data to verify their validity. Design criteria which assist in the selection of system components for optimal performance are also discussed.

Zeller, J. R.↗
NASA NTRS1973

Signal-to-noise ratios in coherent soft limiters

Expressions for the output signal-to-noise power ratio of a bandpass soft limiter followed by a coherent detection device are presented and discussed. It is found that a significant improvement in the output signal-to-noise ratio at low input SNRs can be achieved by such soft limiters as compared to hard limiters. This indicates that the soft limiter may be of some use in the area of threshold extension. Approximation methods for determining output signal-to-noise spectral densities are also presented.

Lesh, J. R.↗
NASA NTRS1972

The performance of a noncoherent FSK receiver preceded by a bandpass limiter.

Many applications of the bandpass limiter involve either coherent or noncoherent demodulation following the limiter. In this paper we study the performance of a noncoherent frequency-shift keying (FSK) receiver when it is preceded by a bandpass limiter. In particular, we obtain expressions for signal suppression factor, output signal-to-noise ratio (SNR), and error probability from which one can assess the degradation in performance of the receiver due to the presence of the limiter.

Simon, M. K.↗
NASA NTRS1972

Kinetic theory of a two-dimensional magnetized plasma. II - Balescu-Lenard limit.

The kinetic theory of a two-dimensional one-species plasma in a uniform dc magnetic field is investigated in the small plasma parameter limit. The plasma consists of charged rods interacting through the logarithmic Coulomb potential. Vahala and Montgomery earlier (1971) derived a Fokker-Planck equation for this system, but it contained a divergent integral, which had to be cut off on physical grounds. This cutoff is compared to the standard cutoff introduced in the two-dimensional unmagnetized Fokker-Planck equation. In the small plasma parameter limit, it is shown that the Balescu-Lenard collision term is zero in the long time average limit if only two-body interactions are considered. The energy transfer from a test particle to an equilibrium plasma is discussed and is also shown to be zero in the long time average limit. This supports the unexpected result of zero Balescu-Lenard collision term.

Vahala, G.↗
NASA NTRS1974

A new upper limit for an atmosphere of CO2, CO on Mercury

High-resolution infrared spectra of Mercury (1.9-2.7 microns, resolution limit 0.134 wavelength/cm) obtained with the original 'Connes' interferometer at the Steward Observatory 90-inch telescope have provided a very sensitive test for the possible presence of a CO2, CO atmosphere. An improved upper limit of 0.12 cm-atm has been set for CO2, and a new upper limit of 0.05 cm-atm has been set for CO. Upper limits of similar magnitude can be established for CH4 and NH3. From the separation of the Mercury signal into reflected sunlight and thermal emission, we determine that the reflectivity decreases toward longer wavelengths and has a value of about 0.06 at 2.25 microns. Implications for the possible evolution of an atmosphere on Mercury are discussed.

Fink, U.↗
NASA NTRS1974

Signal-to-noise ratios in coherent soft limiters

Expressions for the output signal-to-noise power ratio of a bandpass soft limiter followed by a coherent detection device are presented and discussed. It is found that a significant improvement in the output signal-to-noise ratio (SNR) at low input SNR's can be achieved by such soft limiters as compared to hard limiters. This indicates that the soft limiter may be of some use in the area of threshold extension. Approximation methods for determining output signal-to-noise spectral densities are also presented.

Lesh, J. R.↗
NASA NTRS1976

A flight investigation of piloting techniques and crosswind limitations during visual STOL-type landing operations

A flight research program was undertaken to investigate problems concerned with landing a STOL airplane in crosswind conditions. The program included a study of piloting techniques and crosswind limitations during visual STOL type landing operations. The results indicated that the crosswind was more limiting during the ground roll out than during the airborne phases. The pilots estimated that the crosswind limit for commercial STOL type operations with the test aircraft would be approximately 15 to 20 knots. The pilots thought that the crosswind limits for ground operation might be extended by incorporating wing-lift spoilers, improved nose gear steering, and improved engine response. The pilots agreed that a crosswind landing gear would also be beneficial.

Fisher, B. D.↗
NASA NTRS1977

A description of the software analysis from flight and simulation data of the course cut limiter in the TCV b-737 area navigation computer

During automatic horizontal path captures, the (Terminal Configured Vehicle) B-737 airplane maintained smaller than designed path intercept angles and experienced a sawtooth bank angle oscillation during its turn towards the path. From flight data, it was determined that these anomalies were caused by the improper output of the course cut limiter in the horizontal path control law. The output from the course cut limiter did not obtain its full value and it was calculated stepwise discontinuously. The automatic horizontal path captures were then conducted on the TCV B-737 airplane real-time simulation. The path intercept angles were maintained properly and no bank angle oscillation was encountered. Data showed that the course cut limiter was calculated at its full value in a continuous manner. The intermediate calculations of the course cut limiter in the airplane's navigation computer were rewritten and rescaled in such a manner that truncation errors could be minimized. The horizontal path capture tests were then reflown. The airplane maintained the proper path intercept angle and no bank angle oscillations occurred on any of the tests.

Knox, C. E.↗