Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inelastic parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Plasmon device design: Conversion from surface to junction plasmons with grating-couplers

Scaling calculations and numerical studies are used to show that grating couplers provide effective energy transfer between surface plasmons and slower modes localized in the tunnel diodes. Within first order perturbation theory in grating amplitude, 90% efficiency energy transfer occurs within micrometers for realistic structures and materials parameters. Scaling laws are derived. Seventy to 90% of the electromagnetic field energy is concentrated in the oxide layer of an MOM diode after the energy is distributed by longer range modes that have less than 0.1% overlap with the tunneling region. The mode conversion allows the requirements separation for energy transport and power production by inelastic tunneling.

Anderson, L. M.↗
DOE OSTI2021

Direct determination of the zero-field splitting for the Fe 3+ ion in a synthetic polymorph of NaMgFe(C 2 O 4 ) 3 ·9H 2 O: A natural metal-organic framework

Here we employed inelastic neutron scattering (INS), specific heat, and magnetization analysis to study the magnetism in a synthetic polymorph of the quasi-two-dimensional natural metal-organic framework material, stepanovite NaMgFe(C 2 O 4 ) 3 ∙9H 2 O. No long-range magnetic order can be observed down to 0.5 K. The INS spectra show two dispersionless excitations at energy transfer 0.028(1) and 0.050(1) meV at base temperature, which are derived from the magnetic transitions between zero-field splitting (ZFS) of S = 5/2 ground state multiplets of Fe 3+ ion. Further analysis of the INS results shows that the Fe 3+ ion has an easy-axis anisotropy with axial ZFS parameter D = –0.0128(5) meV and rhombic parameter E = 0.0014(5) meV. The upward behavior at zero field and Schottky-like peak under magnetic field of the low-temperature magnetic specific heat further support the INS results. Our results clearly reveal the magnetic ground and excited state of this stepanovite polymorph.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Temperature-dependent lattice dynamics in iridium

The characterization of simple elemental systems is key to benchmarking first-principles modeling of electronic and vibrational behaviors of materials. A large body of literature has been built for most elemental systems in the periodic table. However, surprisingly little neutron work has been performed to probe the vibrational properties of iridium, likely due to its large neutron absorption cross section. Nonetheless, iridium is of significant scientific and technological interest due to large relativistic electron effects and electron-phonon coupling, particularly in strongly correlated iridate compounds. In this paper, we report temperature-dependent inelastic neutron scattering measurements of the vibrational properties of iridium, from which we extract key thermodynamic properties. To overcome the challenge of the large neutron absorption of iridium, we developed a simple post-processing correction procedure. The measured densities of phonon states compare well with quasiharmonic density functional theory calculations, although the obtained experimental phonon Grüneisen parameters are much larger than expected, reaching as high as γ=4.5, indicating substantial anharmonicity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simultaneous inference of the compressibility and inelastic response of tantalum under extreme loading

We study the deformation of tantalum under extreme loading conditions. Experimental velocity data are drawn from both ramp loading experiments on Sandia’s Z-machine and gas gun compression experiments. The drive conditions enable the study of materials under pressures greater than 100 GPa. We provide a detailed forward model of the experiments including a model of the magnetic drive for the Z-machine. Utilizing these experiments, we simultaneously infer several different types of physically motivated parameters describing equation of state, plasticity, and anelasticity via the computational device of Bayesian model calibration. Characteristics of the resulting calculated posterior distributions illustrate relationships among the parameters of interest via the degree of cross correlation. The calibrated velocity traces display good agreement with the experiments up to experimental uncertainty as well as improvement over previous calibrations. Examining the Z-shots and gun-shots together and separately reveals a trade-off between accuracy and transferability across different experimental conditions. Implications for model calibration, limitations from model form, and suggestions for improvements are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Light-front wavefunctions of mesons by design

Abstract We develop a mechanism to build the light-front wavefunctions (LFWFs) of meson bound states on a small-sized basis function representation. Unlike in a standard Hamiltonian formalism, the Hamiltonian in this method is implicit, and the information of the system is carried directly by the functional form and adjustable parameters of the LFWFs. In this work, we model the LFWFs for four charmonium states, $$\eta _c$$ η c , $$J/\psi $$ J / ψ , $$\psi '$$ ψ ′ , and $$\psi (3770)$$ ψ ( 3770 ) as superpositions of orthonormal basis functions. We choose the basis functions as eigenfunctions of an effective Hamiltonian, which has a longitudinal confining potential in addition to the transverse confining potential from light-front holographic QCD. We determine the basis function parameters and superposition coefficients by employing both guidance from the nonrelativistic description of the meson states and the experimental measurements of the meson decay widths. With the obtained wavefunctions, we study the features of those meson states, including charge radii and parton distribution functions. We use the $$J/\psi $$ J / ψ LFWF to calculate the meson production in diffractive deep inelastic scattering and ultra-peripheral heavy-ion collisions, and the $$\eta _c$$ η c LFWF to calculate its diphoton transition form factor. Both results show good agreement with experiments. The obtained LFWFs have simple-functional forms and can be readily used to predict additional experimental observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Quantum spin ice response to a magnetic field in the dipole-octupole pyrochlore Ce 2 Zr 2 O 7

The pyrochlore magnet Ce 2 Zr 2 O 7 has attracted much attention as a quantum spin ice candidate whose novelty derives in part from the dipolar-octupolar nature of the Ce 3+ pseudospin-1/2 degrees of freedom it possesses. We report heat capacity measurements on single crystal samples of Ce 2 Zr 2 O 7 down to T~0.1K in a magnetic field along the [$1,\bar{1},0$] direction. These measurements show that the broad hump in the zero-field heat capacity moves higher in temperature with increasing field strength and is split into two separate humps by the [$1,\bar{1},0$] magnetic field at ~2T. These separate features are due to the decomposition of the pyrochlore lattice into effectively decoupled chains for fields in this direction: One set of chains (α chains) is polarized by the field while the other (β chains) remains free. This situation is similar to that observed in the classical spin ices Ho 2 Ti 2 O 7 and Dy 2 Ti 2 O 7 , but with the twist that here the strong transverse exchange interactions produce substantial quantum effects. Our theoretical modeling suggests that the β chains are close to a critical state, with nearly-gapless excitations. We also report elastic and inelastic neutron scattering measurements on single crystal Ce 2 Zr 2 O 7 in [$1,\bar{1},0$] and [0,0,1] magnetic fields at temperatures down to T=0.03K. The elastic scattering behaves consistently with the formation of independent chains for a [$1,\bar{1},0$] field, while the [0,0,1] field produces a single field-induced elastic magnetic Bragg peak at (0,2,0) and equivalent wavevectors, indicating a polarized spin ice state for fields above ~3T. For both [$1,\bar{1},0$] and [0,0,1] magnetic fields, our inelastic neutron scattering results show an approximately dispersionless continuum of scattering that increases in both energy and intensity with increasing field strength. By modeling the complete set of experimental data using numerical linked cluster and semiclassical molecular dynamics calculations, we demonstrate the dominantly multipolar nature of the exchange interactions in Ce 2 Zr 2 O 7 and the smallness of the parameter θ, which controls the mixing between dipolar and octupolar degrees of freedom. Finally, these results support previous estimates of the microscopic exchange parameters and place strong constraints on the theoretical description of this prominent spin ice candidate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Simulation Study of High-Precision Characterization of MeV Electron Interactions for Advanced Nano-Imaging of Thick Biological Samples and Microchips

The resolution of a mega-electron-volt scanning transmission electron microscope (MeV-STEM) is primarily governed by the properties of the incident electron beam and angular broadening effects that occur within thick biological samples and microchips. A precise understanding and mitigation of these constraints require detailed knowledge of beam emittance, aberrations in the STEM column optics, and energy-dependent elastic and inelastic critical angles of the materials being examined. This simulation study proposes a standardized experimental framework for comprehensively assessing beam intensity, divergence, and size at the sample exit. This framework aims to characterize electron-sample interactions, reconcile discrepancies among analytical models, and validate Monte Carlo (MC) simulations for enhanced predictive accuracy. Our numerical findings demonstrate that precise measurements of these parameters, especially angular broadening, are not only feasible but also essential for optimizing imaging resolution in thick biological samples and microchips. By utilizing an electron source with minimal emittance and tailored beam characteristics, along with amorphous ice and silicon samples as biological proxies and microchip materials, this research seeks to optimize electron beam energy by focusing on parameters to improve the resolution in MeV-STEM/TEM. This optimization is particularly crucial for in situ imaging of thick biological samples and for examining microchip defects with nanometer resolutions. Our ultimate goal is to develop a comprehensive mapping of the minimum electron energy required to achieve a nanoscale resolution, taking into account variations in sample thickness, composition, and imaging mode.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Origin of Intrinsically Low Thermal Conductivity in a Garnet-Type Solid Electrolyte: Linking Lattice and Ionic Dynamics with Thermal Transport

Understanding thermal transport in solid electrolytes is essential for improving the performance, reliability, and safety of all-solid-state batteries. Garnet-type lithium-ion conductors are promising candidates for solid electrolytes, yet their thermal-transport mechanisms remain poorly understood. Here, we connect the lattice and ion dynamics of single-crystal garnet-type Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 to its intrinsically low thermal conductivity. Our study reveals that the single crystals grown by the floating-zone method exhibit remarkably low glasslike thermal conductivity. Using first-principles calculations and inelastic-neutron-scattering measurements, we identify both the acoustic and numerous optical phonon modes, which stem from the complex crystal structure of the material. Notably, a low-energy optical branch exhibits an avoided crossing with acoustic phonons near 7 meV. These optical modes can enhance the scattering of heat-carrying acoustic phonons and reduce thermal conductivity. Furthermore, the calculated Grüneisen parameters are large, especially for the vibrational modes around 6 meV, indicating strong anharmonicity, with a noticeable contribution from lithium-ion vibrations. A two-channel thermal-transport model is employed to describe the weak temperature dependence of the thermal conductivity, which can be attributed to the substantial contribution of diffuson transport facilitated by the abundance of optical phonons and intrinsic anharmonicity. These results offer valuable insights into the thermal transport in a broad class of ionic conductors of interest for energy conversion and storage applications.

Ab initio calculations↗
DOE OSTI2021

Evaluation of external tubular configurations for a high-temperature chloride molten salt solar receiver operating above 700°C

Next-generation concentrating solar power (CSP) tower technologies target operating temperatures exceeding 700°C to increase the thermal-to-electric conversion efficiency. Molten chloride salts are one possible alternative to current commercial molten nitrate salts to enable the higher operating temperature. This paper analyzes the predicted optical, thermal-fluids, and structural performance of traditional external tubular solar receiver configurations applied with a chloride salt heat transfer fluid (HTF) and inlet/outlet temperatures of 500°C/735°C, and considers sensitivity analysis and optimization relative to receiver sizing, tube sizing, number of panels, flow circuit configurations, and solar flux concentration under constraints on internal velocity, pressure drop, wall thickness, and required creep-fatigue lifetime. The high temperature conditions increase the significance of inelastic deformation mechanisms such as creep relative to that expected in commercial 565°C nitrate salt designs. High-temperature creep and creep-fatigue damage in the metal alloy tubes are the key factors that limit allowable solar flux concentration and achievable receiver thermal efficiency at the near-800°C wall temperature conditions. For a traditional external cylindrical receiver configuration, the design parameters and conditions capable of satisfying all constraints produced, at best, a design point receiver efficiency of 78.2%, or 80.5% when excluding receiver intercept efficiency. Variation in the optimal receiver performance relative to uncertainty in the binding maximum velocity, minimum wall thickness, and minimum lifetime constraints is presented.

14 SOLAR ENERGY↗
DOE OSTI2025

Lattice Structure and Dynamics of Sparse Molecular Crystals: OsO 4 and RuO 4

OsO 4 and RuO 4 are molecular oxides with unique tetrameric structures and rare +8 oxidation states. Accurately modeling their properties remains challenging for density functional theory (DFT) due to weak intertetramer interactions, which standard functionals fail to capture. Here, in this work, we show that the van der Waals (vdW)-corrected density functional (vdW-DF-optB86b) provides structural parameters that are much closer to experimental values than the standard generalized gradient approximation, with volume predictions that fall within the experimentally observed range. Phonon band structure analysis shows that the inclusion of vdW interactions stabilizes soft phonon modes, highlighting the importance of dispersion corrections for accurate predictions of lattice dynamics. Experimental measurements of the phonon density of states for OsO 4 , obtained via inelastic neutron scattering, demonstrate good agreement with our vdW-DF-optB86b calculations. These results validate OsO 4 and RuO 4 as valuable benchmarks for structural and vibrational calculations via vdW-corrected DFT methods and offer insights for studying the broader class of sparse molecular materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Mode II interlaminar fracture of graphite/epoxy and graphite/PEEK

The end notched flexure (ENF) specimen is employed in an investigation of the interlaminar fracture toughness in Mode II (skew symmetric shear) loading of unidirectional graphite/epoxy and graphite/PEEK composites. Important experimental parameters such as the influence of precracking and the data reduction scheme for the Mode II toughness are discussed. Nonlinear load-deflection response is significant for the tough thermoplastic resin composite but is also present for the brittle thermoset composite. The observed nonlinearities, which are highly rate dependent, are attributed to a combination of slow stable crack growth preceding unstable crack growth and material inelastic behavior in the process zone around the crack tip.

Carlsson, L. A.↗
DOE OSTI2024

Resonant inelastic x-ray scattering in the topological semimetal FeSi

The energy spectrum of topological semimetals contains protected degeneracies in reciprocal space that correspond to Weyl, Dirac, or multifold fermionic states. To exploit the unconventional properties of these states, one has to access the electronic structure of the three-dimensional bulk. In this paper, we present a joint theory-experiment study of the electronic structure of a candidate topological semimetal with resonant inelastic x-ray scattering (RIXS). We resolve the bulk electronic states of FeSi using momentum-dependent RIXS at the Fe L 3 edge. We observe a broad excitation continuum devoid of sharp features, consistent with particle-hole scattering in an underlying electronic band structure. Using density functional theory (DFT), we calculate the electronic structure of FeSi and derive a band theory formulation of RIXS in the fast collision approximation to model the scattering process with zero adjustable parameters. While band theory predicts an excitation continuum with broad spectral features similar to the observed ones, discrepancies between theory and experiment suggest the presence of low-energy processes that DFT alone does not account for. Further, this study of RIXS in a topological semimetal shows that RIXS is a useful tool for revealing unanticipated behavior of bulk electronic states in this class of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1986

A Constitutive Model for the Inelastic Multiaxial Cyclic Response of a Nickel Base Superalloy Rene 80

The objective was to develop unified constitutive equations which can model a variety of nonlinear material phenomena observed in Rene 80 at elevated temperatures. A constitutive model was developed based on back stress and drag stress. The tensorial back stress was used to model directional effects; whereas, the scalar drag stress was used to model isotropic effects and cyclic hardening or softening. A flow equation and evolution equations for the state variables were developed in multiaxial form. Procedures were developed to generate the material parameters. The model predicted very well the monotonic tensile, cyclic, creep, and stress relaxation behavior of Rene 80 at 982 C. The model was then extended to 871, 760, and 538 C. It was shown that strain rate dependent behavior at high temperatures and strain rate independent behavior at the lower temperatures could be predicted very well. A large number of monotonic tensile, creep, stress relation, and cyclic experiments were predicted. The multiaxial capabilities of the model were verified extensively for combined tension/torsion experiments. The prediction of the model agreed very well for proportional, nonproportional, and pure shear cyclic loading conditions at 982 and 871 C.

Ramaswamy, V. G.↗
DOE OSTI2020

Neutron scattering off Weyl semimetals

We present how to detect type-I Weyl nodes in a material by inelastic neutron scattering. Such an experiment first of all allows one to determine the dispersion of the Weyl fermions. We extend the reasoning to produce a quantitative test of the Weyl equation, taking into account realistic anisotropic properties. These anisotropies are mostly contained in the form of the emergent magnetic moment of the excitations, which determines how they couple to the neutrons. Although there are many material parameters, we find several quantitative predictions that are universal and demonstrate that the excitations are described by solutions to the Weyl equation. The anisotropic coupling between electrons and neutrons implies that even fully unpolarized neutrons can reveal the spin-momentum locking of the Weyl fermions because the neutrons will couple to some components of the Weyl fermion pseudospin more strongly. On the other hand, in an experiment with polarized neutrons, the scattered neutron beam remains fully polarized in a direction that varies as a function of momentum transfer (within the range of validity of the Weyl equation). This allows measurement of the chirality of Weyl fermions for inversion-symmetric nodes. Furthermore, in this work we estimate that the scattering rate may be large enough for such experiments to be practical; in particular, the magnetic moment may be larger than the ordinary Bohr magneton, compensating for a small density of states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Observation of van der Waals phonons in the single-layer cuprate ( Bi , Pb ) 2 ( Sr , La ) 2 CuO 6 + δ

Interlayer van der Waals (vdW) coupling is generic in two-dimensional materials such as graphene and transition-metal dichalcogenides, which can induce very low-energy phonon modes. Using high-resolution inelastic hard x-ray scattering, we uncover the ultralow energy phonon mode along the Cu-O bond direction in the high- T c cuprate (Bi,Pb) 2 (Sr,La) 2 ⁢CuO 6+$\delta$ (Bi2201). The energy and full-width half-maximum (FWHM) of these modes are independent of temperature, while their intensity decreases with doping in accordance with an increasing c -axis lattice parameter. Here, we compare the experimental results to first-principles density functional theory simulations and identify the observed mode as a van der Waals phonon, which arises from the shear motion of the adjacent Bi-O layers. This shows that Bi-based cuprate has vibrational properties similar to graphene and transition-metal dichalcogenides, which can be exploited to engineer novel heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Gamma rays and gravitational waves from inelastic Higgs portal dark matter

We explore a simple and predictive dark matter scenario involving a complex scalar field, ϕ , coupled to the Higgs portal with no additional field content. In the UV, the field possesses a global U ( 1 ) symmetry which is broken by mass terms and Higgs portal interactions. In the mass basis, the complex field splits into a pair of real scalars with a small mass splitting (in analogy to pseudo-Dirac fermions), such that the Higgs portal acquires both diagonal and off-diagonal terms with respect to these eigenstates. In the parameter space where the off-diagonal interaction predominates, this scenario is safe from direct detection constraints. Moreover, this model provides a viable explanation for the longstanding Galactic Center γ -ray excess. Additionally, this model influences the Higgs potential in a way that could facilitate a strong first-order electroweak phase transition in the early Universe, potentially leading to a stochastic gravitational wave background that could fall within the reach of upcoming space-based detectors.

Hooper, Dan [Wisconsin U., Madison] (ORCID:0009000↗
DOE OSTI2021

Mechanical and Thermal Properties for Uranium and U–6Nb Alloy from First-Principles Theory

Elasticity, lattice dynamics, and thermal expansion for uranium and U–6Nb alloy (elastic moduli) are calculated from density functional theory that is extended to include orbital polarization (DFT+OP). Introducing 12.5 at.% of niobium, substitutionally, in uranium softens all the cii elastic moduli, resulting in a significantly softer shear modulus (G). Combined with a nearly invariant bulk modulus (B), the quotient B/G increases dramatically for U–6Nb, suggesting a more ductile material. Lattice dynamics from a harmonic model coupled with a DFT+OP electronic structure is applied for α uranium, and the obtained phonon density of states compares well with inelastic neutron-scattering measurements. The Debye temperature associated with the lattice dynamics falls within the range of experimentally observed Debye temperatures and it also validates our quasi-harmonic (QH) phonon model. The QH Debye–Grüneisen phonon method is combined with a DFT+OP electronic structure and used to explore the anisotropic thermal expansion in α uranium. The anomalous negative thermal expansion (contraction) of the b lattice parameter of the α-phase orthorhombic cell is relatively well reproduced from a free-energy model consisting of QH-phonon and DFT+OP electronic structure contributions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2011

A Collisional Algorithm for Modeling Circumstellar Debris Disks

Many planetary systems harbor circumstellar disks of dust and planetesimals thought to be debris left over from planet formation. These debris disks exhibit a range of morphological features which can arise from the gravitational perturbations of planets. Accurate models of these features, accounting for the interactions of the particles in a disk with each other and with whatever planets they contain, can act as signposts for planets in debris disks that otherwise could not be detected. Such models can also constrain the planet's mass and orbital parameters. Current models for many disks consider the gravitational and radiative effects of the star and planets on the disk, but neglect the morphological consequences of collisional interactions between the planetesimals. Many observed disk features are not satisfactorily explained by the current generation of models. I am developing a new kind of debris disk model that considers both the gravitational shaping of the disk by planets and the inelastic collisions between particles. I will use a hybrid N-body integrator to numerically solve the equations of motion for the particles and planets in the disk. To include the collisional effects, I begin with an algorithm that tests for collisions at each step of the orbit integration and readjusts the velocities of colliding particles. I am adapting this algorithm to the problem at hand by allowing each particle to represent a "swarm" of planetesimals with a range of masses. When the algorithm detects an encounter between swarms, two or three swarms are produced to approximate the range of possible trajectories of the daughter planetesimals. Here I present preliminary results from my collisional algorithm.

Nesvold, Erika↗