Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Isothermal dehydration of thin films of water and sugar solutions

The process of quasi-isothermal dehydration of thin films of pure water and aqueous sugar solutions is investigated with a dual experimental and theoretical approach. A nanoporous paper disk with a homogeneous internal structure was used as a substrate. This experimental set-up makes it possible to gather thermodynamic data under well-defined conditions, develop a numerical model, and extract needed information about the dehydration process, in particular the water activity. It is found that the temperature evolution of the pure water film is not strictly isothermal during the drying process, possibly due to the influence of water diffusion through the cellulose web of the substrate. The role of sugar is clearly detectable and its influence on the dehydration process can be identified. At the end of the drying process, trehalose molecules slow down the diffusion of water molecules through the substrate in a more pronounced way than do the glucose molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rarefied gas flow in a rectangular enclosure induced by non-isothermal walls

The flow of a rarefied gas in a rectangular enclosure due to the non-isothermal walls with no synergetic contributions from external force fields is investigated. The top and bottom walls are maintained at constant but different temperatures and along the lateral walls a linear temperature profile is assumed. Modeling is based on the direct numerical solution of the Shakhov kinetic equation and the Direct Simulation Monte Carlo (DSMC) method. Solving the problem both deterministically and stochastically allows a systematic comparison and verification of the results as well as the exploitation of the numerical advantages of each approach in the investigation of the involved flow and heat transfer phenomena. The thermally induced flow is simulated in terms of three dimensionless parameters characterizing the problem, namely, the reference Knudsen number, the temperature ratio of the bottom over the top plates, and the enclosure aspect ratio. Their effect on the flow configuration and bulk quantities is thoroughly examined. Along the side walls, the gas flows at small Knudsen numbers from cold-to-hot, while as the Knudsen number is increased the gas flows from hot-to-cold and the thermally induced flow configuration becomes more complex. These flow patterns with the hot-to-cold flow to be extended to the whole length of the non-isothermal side walls may exist even at small temperature differences and then, they are enhanced as the temperature difference between the top and bottom plates is increased. The cavity aspect ratio also influences this flow configuration and the hot-to-cold flow is becoming more dominant as the depth compared to the width of the cavity is increased. To further analyze the flow patterns a novel solution decomposition into ballistic and collision parts is introduced. This is achieved by accordingly modifying the indexing process of the typical DSMC algorithm. The contribution of each part of the solution is separately examined and a physical interpretation of the flow configuration, including the hot-to-cold flow close to the side walls, in the whole range of the Knudsen number is provided.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Liouvillian integrability of gravitating static isothermal fluid spheres

We examine the integrability properties of the Einstein field equations for static, spherically symmetric fluid spheres, complemented with an isothermal equation of state, ρ = np. In this case, Einstein's equations can be reduced to a nonlinear, autonomous second order ordinary differential equation (ODE) for m/R (m is the mass inside the radius R) that has been solved analytically only for n = -1 and n = -3, yielding the cosmological solutions by De Sitter and Einstein, respectively, and for n = -5, case for which the solution can be derived from the De Sitter's one using a symmetry of Einstein's equations. The solutions for these three cases are of Liouvillian type, since they can be expressed in terms of elementary functions. Here, we address the question of whether Liouvillian solutions can be obtained for other values of n. To do so, we transform the second order equation into an equivalent autonomous Lotka–Volterra quadratic polynomial differential system in R² and characterize the Liouvillian integrability of this system using Darboux theory. We find that the Lotka–Volterra system possesses Liouvillian first integrals for n = -1, -3, -5, which descend from the existence of invariant algebraic curves of degree one, and for n = -6, a new solvable case, associated to an invariant algebraic curve of higher degree (second). For any other value of n, eventual first integrals of the Lotka–Volterra system, and consequently of the second order ODE for the mass function must be non-Liouvillian. This makes the existence of other solutions of the isothermal fluid sphere problem with a Liouvillian metric quite unlikely.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron temperature measurement in Maxwellian non-isothermal beam plasma of an ion thruster

Published electron temperature profiles of the beam plasma from ion thrusters reveal many divergences both in magnitude and radial variation. In order to know exactly the radial distributions of electron temperature and understand the beam plasma characteristics, we applied five different experimental approaches to measure the spatial profiles of electron temperature and compared the agreement and disagreement of the electron temperature profiles obtained from these techniques. Experimental results show that the triple Langmuir probe and adiabatic poly-tropic law methods could provide more accurate space-resolved electron temperature of the beam plasma than other techniques. Radial electron temperature profiles indicate that the electrons in the beam plasma are non-isothermal, which is supported by a radial decrease (∼2 eV) of electron temperature as the plume plasma expands outward. Therefore, the adiabatic “poly-tropic law” is more appropriate than the isothermal “barometric law” to be used in electron temperature calculations. Moreover, the calculation results show that the electron temperature profiles derived from the “poly-tropic law” are in better agreement with the experimental data when the specific heat ratio (γ) lies in the range of 1.2-1.4 instead of 5/3.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Near-isothermal furnace for in situ and real time X-ray radiography solidification experiments

In this paper, we present a newly developed near-isothermal X-ray transparent furnace for in situ imaging of solidification processes in thin metallic samples. We show that the furnace is ideally suited to study equiaxed microstructure evolution and grain interaction. To observe the growth dynamics of equiaxed dendritic structures, a minimal temperature gradient across the sample is required. A uniform thermal profile inside a circular sample is achieved by positioning the sample in the center of a cylindrical furnace body surrounded by a circular heater arrangement. Performance tests with the hypo-eutectic Al-15wt.%Cu and the near-eutectic Al-33wt.%Cu alloys validate the near-isothermal character of the sample environment. Controlled cooling rates of less than 0.5 K min{sup −1} up to 10 K min{sup −1} can be achieved in a temperature range of 720 K–1220 K. Integrated in our rotatable laboratory X-ray facility, X-RISE, the furnace provides a large field of view of 10.5 mm in diameter and a high spatial resolution of ∼4 μm. With the here presented furnace, equiaxed dendrite growth models can be rigorously tested against experiments on metal alloys by, e.g., enabling dendrite growth velocities to be determined as a function of undercooling or solutal fields in front of the growing dendrite to be measured.

36 MATERIALS SCIENCE↗

Sampling the isothermal-isobaric ensemble by Langevin dynamics

We present a new method of conducting fully flexible-cell molecular dynamics simulation in isothermal-isobaric ensemble based on Langevin equations of motion. The stochastic coupling to all particle and cell degrees of freedoms is introduced in a correct way, in the sense that the stationary configurational distribution is proved to be consistent with that of the isothermal-isobaric ensemble. In order to apply the proposed method in computer simulations, a second order symmetric numerical integration scheme is developed by Trotter’s splitting of the single-step propagator. Moreover, a practical guide of choosing working parameters is suggested for user specified thermo- and baro-coupling time scales. The method and software implementation are carefully validated by a numerical example.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ x-ray diffraction study of polyamorphism in H 2 O under isothermal compression and decompression

Amorphous-amorphous transformations in H 2 O have been studied under rapid isothermal compression and decompression in a diamond anvil cell together with in situ x-ray diffraction measurements using brilliant synchrotron radiation. The experimental pathways provide a density-driven approach for studying polyamorphic relations among low-, high-, and very high-density amorphs (LDA, HDA, VHDA) in a pressure range of 0-3.5 GPa at temperatures of 145-160 K. Our approach using rapid (de) compression allows for studying the polyamorphic transformations at higher temperatures than the conditions previously studied under slow (de) compression or isobaric annealing. Multiple compression-decompression cycles can be integrated with in situ x-ray measurements, thus facilitating the study of repeatability and reversibility of the polyamorphic transformations. Fast in situ x-ray diffraction measurements allow for obtaining detailed insight into the structural changes across polyamorphic transformations regarding the (dis) continuity, reversibility, and possible intermediate forms. As demonstrated at isothermal conditions of 145 K and 155 K, the polyamorphic transformations are characterized by a sharp and reversible LDA-VHDA transformation, with an HDA-like form (referred to as HDA' appearing as an intermediate state. The LDA-VHDA transformation is found to occur in two steps: a discontinuous transition between LDA and HDA' and a continuous change within HDA' involving structural reconfigurations and finally converging to VHDA. Published under license by AIP Publishing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure isothermal equation of state of composite materials: A case study of LX-17 polymer bonded explosive

Experimental determination of the isothermal high-pressure equation of state (EOS) of composites is not feasible by using conventional diffraction techniques. To solve this problem in the case of polymer bonded explosives (PBXs), composites made of an energetic material and a polymeric binder, we have expanded the applicability of the optical microscopy and interferometry technique previously developed in our group. To accommodate representative samples of a PBX with large grains, we modified the diamond culets of a diamond anvil cell to include etched micrometer-scale pits. This enabled us to measure the isothermal EOS of a PBX, namely, LX-17, up to 8 GPa. The conclusions are compared with the EOSs of the constituent materials and previously published shock measurements. The technique employed in this study is not limited to PBXs and could be potentially used for the EOS determination of other materials ranging from composites to alloys and granular materials.

36 MATERIALS SCIENCE↗

Adiabatic and isothermal configurations for Re 4 Si 7 transverse thermoelectric power generators

We report that transverse thermoelectric generators (TTEGs) have the potential to overcome two challenging problems that limit the commercial application of classical thermoelectric generators (TEGs): the significant irreversible efficiency losses in the contacts and the thermal degradation of the contacts at the hot end. TTEGs are built from a single material that can generate a thermoelectric current in a direction that is orthogonal to a temperature gradient. They only require a single set of contacts that are displaced away from the hot end. Here, we experimentally explore the device design considerations for optimizing the performance of this far less explored class of thermal-to-electric generation devices. We fabricate Re 4 Si 7 TTEGs and show that there is no measurable loss in efficiency with a single set of contacts that are midway between the hot and cold ends. We show that a new effect must be considered: the appearance of transverse thermal gradients that lead to significant differences between the performance of TTEGs implemented in isothermal and adiabatic geometries. The isothermal TTEG configuration leads to much higher device efficiencies. Overall, this work highlights how different the design of TTEGs is from that of conventional TEGs and the importance of controlling the device geometry for optimum waste heat recovery.

30 DIRECT ENERGY CONVERSION↗

A newly proposed isotherm model to predict Cs exchange with crystalline silicotitanate in tank waste simulants

The Zheng Anthony Miller (ZAM) computer model, a multicomponent ion exchange model used to predict the exchange of Group I metals onto crystalline silicotitanate (CST), has historically been used to predict Cs distribution coefficients from Hanford and Savannah River Site (SRS) tank waste simulants. Comparison of experimentally determined Cs distribution coefficients from tank waste simulants with ZAM isotherm model predictions indicate overprediction of Cs and K distribution coefficients for simple and complex simulants with the engineered form of CST. Additionally, recent changes in chemical composition/manufacturing of IONSIV TM R9140-B have resulted in increased Cs capacity from high-salt, highly alkaline solutions. Here, this work served to assess different isotherm models and refine equilibrium parameters to develop a model that can be applied to Hanford and SRS tank waste Cs removal efforts. Toward this goal, the Campbell Westesen Peterson (CWP) model was developed. This model utilized the experimentally determined Cs capacity, and simplified ZAM equilibria expressions to include only the binary substitution of Cs + or K + on the Na + sites. Equilibrium constants for these equations were refined using experimentally determined distribution coefficients. Overall, the CWP model significantly improved our ability to predict both Cs and K loading capacity from complex matrices.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ISOTHERMAL AND MULTITHERMAL ANALYSIS OF CORONAL LOOPS OBSERVED WITH AIA

The coronal filters in the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory peak at different temperatures; the series covers the entire active region temperature range, making AIA ideal for multithermal analysis. Here, we analyze coronal loops from several active regions that have been observed by AIA. We have specifically targeted cool loops (or at least loops with a cool component) that were chosen in the 171 A channel of AIA, which has a peak response temperature of log T = 5.8. We wanted to determine if the loops could be described as isothermal or multithermal. We find that several of our 12 loops have narrow temperature distributions, which may be consistent with isothermal plasma; these can be modeled with a single flux tube. Other loops have intermediate-width temperature distributions, appear well-constrained, and should be multi-stranded. The remaining loops, however, have unrealistically broad differential emission measures. We find that this problem is the result of missing low-temperature lines in the AIA 131 A channel. If we repeat the analysis without the 131 A data, these loops also appear to be well-constrained and multi-stranded.

79 ASTRONOMY AND ASTROPHYSICS↗

ROSSBY WAVE INSTABILITY IN LOCALLY ISOTHERMAL AND POLYTROPIC DISKS: THREE-DIMENSIONAL LINEAR CALCULATIONS

Numerical calculations of the linear Rossby wave instability (RWI) in global three-dimensional (3D) disks are presented. The linearized fluid equations are solved for vertically stratified, radially structured disks with either a locally isothermal or polytropic equation of state, by decomposing the vertical dependence of the perturbed hydrodynamic quantities into Hermite and Gegenbauer polynomials, respectively. It is confirmed that the RWI operates in 3D. For perturbations with vertical dependence assumed above, there is little difference in growth rates between 3D and two-dimensional (2D) calculations. Comparison between 2D and 3D solutions of this type suggests the RWI is predominantly a 2D instability and that 3D effects, such as vertical motion, can be interpreted as a perturbative consequence of the dominant 2D flow. The vertical flow around corotation, where vortex formation is expected, is examined. In locally isothermal disks, the expected vortex center remains in approximate vertical hydrostatic equilibrium. For polytropic disks, the vortex center has positive vertical velocity, whose magnitude increases with decreasing polytropic index n.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetohydrostatic equilibrium structure and mass of filamentary isothermal cloud threaded by lateral magnetic field

Herschel observations have recently revealed that interstellar molecular clouds consist of many filaments. Polarization observations in optical and infrared wavelengths indicate that the magnetic field often runs perpendicular to the filament. In this article, we study the magnetohydrostatic configuration of isothermal gas in which the thermal pressure and the Lorentz force are balanced against the self-gravity, and the magnetic field is globally perpendicular to the axis of the filament. The model is controlled by three parameters: center-to-surface density ratio (ρ {sub c}/ρ {sub s}), plasma β of surrounding interstellar gas (β{sub 0}), and the radius of the hypothetical parent cloud normalized by the scale-height (R{sub 0}{sup ′}), although there remains freedom in how the mass is distributed against the magnetic flux (mass loading). In the case where R{sub 0}{sup ′} is small enough, the magnetic field plays a role in confining the gas. However, the magnetic field generally has the effect of supporting the cloud. There is a maximum line-mass (mass per unit length) above which the cloud is not supported against gravity. Compared with the maximum line-mass of a nonmagnetized cloud (2c{sub s}{sup 2}/G, where c{sub s} and G represent, respectively, the isothermal sound speed and the gravitational constant), that of the magnetized filament is larger than the nonmagnetized one. The maximum line-mass is numerically obtained as λ{sub max}≃0.24Φ{sub cl}/G{sup 1/2}+1.66c{sub s}{sup 2}/G, where Φ{sub cl} represents one half of the magnetic flux threading the filament per unit length. The maximum mass of the filamentary cloud is shown to be significantly affected by the magnetic field when the magnetic flux per unit length exceeds Φ{sub cl} ≳ 3 pc μG (c{sub s} /190 m s{sup –1}){sup 2}.

79 ASTRONOMY AND ASTROPHYSICS↗

ANALYTICAL SOLUTIONS OF SINGULAR ISOTHERMAL QUADRUPOLE LENS

Using an analytical method, we study the singular isothermal quadrupole (SIQ) lens system, which is the simplest lens model that can produce four images. In this case, the radial mass distribution is in accord with the profile of the singular isothermal sphere lens, and the tangential distribution is given by adding a quadrupole on the monopole component. The basic properties of the SIQ lens have been studied in this Letter, including the deflection potential, deflection angle, magnification, critical curve, caustic, pseudo-caustic, and transition locus. Analytical solutions of the image positions and magnifications for the source on axes are derived. We find that naked cusps will appear when the relative intensity k of quadrupole to monopole is larger than 0.6. According to the magnification invariant theory of the SIQ lens, the sum of the signed magnifications of the four images should be equal to unity, as found by Dalal. However, if a source lies in the naked cusp, the summed magnification of the left three images is smaller than the invariant 1. With this simple lens system, we study the situations where a point source infinitely approaches a cusp or a fold. The sum of the magnifications of the cusp image triplet is usually not equal to 0, and it is usually positive for major cusps while negative for minor cusps. Similarly, the sum of magnifications of the fold image pair is usually not equal to 0 either. Nevertheless, the cusp and fold relations are still equal to 0 in that the sum values are divided by infinite absolute magnifications by definition.

79 ASTRONOMY AND ASTROPHYSICS↗

A NON-ISOTHERMAL THEORY FOR INTERPRETING SODIUM LINES IN TRANSMISSION SPECTRA OF EXOPLANETS

We present a theory for interpreting the sodium lines detected in transmission spectra of exoplanetary atmospheres. Previous analyses employed the isothermal approximation and dealt only with the transit radius. By recognizing the absorption depth and the transit radius as being independent observables, we develop a theory for jointly interpreting both quantities, which allows us to infer the temperatures and number densities associated with the sodium lines. We are able to treat a non-isothermal situation with a constant temperature gradient. Our novel diagnostics take the form of simple-to-use algebraic formulae and require measurements of the transit radii (and their corresponding absorption depths) at line center and in the line wing for both sodium lines. We apply our diagnostics to the HARPS data of HD 189733b, confirm the upper atmospheric heating reported by Huitson et al., derive a temperature gradient of 0.4376 ± 0.0154 K km{sup −1}, and find densities ∼1–10{sup 4} cm{sup −3}.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetized rotating isothermal winds

ABSTRACT We consider the general problem of a Parker-type non-relativistic isothermal wind from a rotating and magnetic star. Using the magnetohydrodynamics code athena++, we construct an array of simulations in the stellar rotation rate Ω* and the isothermal sound speed cT, and calculate the mass, angular momentum, and energy loss rates across this parameter space. We also briefly consider the 3D case, with misaligned magnetic and rotation axes. We discuss applications of our results to the spin-down of normal stars, highly irradiated exoplanets, and to nascent highly magnetic and rapidly rotating neutron stars born in massive star core-collapse.

Astronomy & Astrophysics↗

A quantitative comparison between velocity dependent SIDM cross-sections constrained by the gravothermal and isothermal models

One necessary step for probing the nature of self-interacting dark matter (SIDM) particles with astrophysical observations is to pin down any possible velocity dependence in the SIDM cross-section. Major challenges for achieving this goal include eliminating, or mitigating, the impact of the baryonic components and tidal effects within the dark matter halos of interest – the effects of these processes can be highly degenerate with those of dark matter self-interactions at small scales. In this work, we select 9 isolated galaxies and brightest cluster galaxies (BCGs) with baryonic components small enough such that the baryonic gravitational potentials do not significantly influence the halo gravothermal evolution processes. We then constrain the parameters of Rutherford and Møller scattering cross-section models with the measured rotation curves and stellar kinematics through the gravothermal fluid formalism and isothermal method. Cross-sections constrained by the two methods are consistent at $1\sigma$ confidence level, but the isothermal method prefers cross-sections greater than the gravothermal approach constraints by a factor of ~ 3.

79 ASTRONOMY AND ASTROPHYSICS↗

Isothermal-sweep theorems for ultracold quantum gases in a canonical ensemble

After deriving the isothermal Hellmann-Feynman theorem (IHFT) that is suitable for mixed states in a canonical ensemble, we use this theorem to obtain the isothermal magnetic-field sweep theorems for the free, average, and trapping energies and for the entropy, specific heat, pressure, and atomic compressibility of strongly correlated ultracold quantum gases. In particular, we apply the sweep theorems to two-component Fermi gases in the weakly interacting Bardeen-Cooper-Schrieffer and Bose-Einstein condensate limits, showing that the temperature dependence of the contact parameter can be determined by varying either the entropy or specific heat with respect to the scattering length. We also use the IHFT to obtain the virial theorem in a canonical ensemble and discuss its implications for quantum gases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗