Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPLEMENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Implementing Online Oscillation Monitoring and Forced Oscillation Source Locating at Peak Reliability

This paper introduces a framework of online oscillation monitoring systems and forced oscillation detection & source location tools that Peak Reliability ('PEAK') has implemented for the Reliability Coordinator (RC) function of the Western Interconnection. The framework consists of four main components: (1) Montana Tech's Modal Analysis Software (MAS) engine; (2) Washington State University's Oscillation Monitor System (OMS) software; (3) Forced Oscillation Detection and Source Location Algorithms (FODSL); and (4) PEAK in-house visualization tool and alarming logic built in PI Processbook. The framework has been validated and applied for real system oscillation studies successfully. Implementation experience and lessons learned will be discussed in the paper.

14 SOLAR ENERGY↗
DOE OSTI2021

Transactive Implementation of Decentralized Electricity Market for Grid-Edge Systems

The electricity landscape is evolving towards more decentralized approaches due to the proliferation of distributed energy resources and the participation of increasingly smart consumers and producers (prosumers). Recent advances in information and communication technologies and smart metering, provides strategic opportunities for “prosumers” to reform their conventional energy practices towards more consumer-centric economies. From an operational perspective, managing power distribution networks is becoming more difficult with such active grid-edge systems providing limited to no visibility or control. Transactive Energy (TE) has been emerging as a key enabler towards effectively and efficiently integrating prosumers into competitive electricity markets. This work presents a transactive implementation of community-centric markets. A co-simulation framework is developed for evaluating the proposed market structure with high-fidelity models. Case studies on the IEEE-123 node test system demonstrate that community-centric transactive markets can enable communities of prosumers to operate collaboratively as grid-edge systems. The potential benefits of implementing community-centric TE systems are also illustrated.

transactive, microgrids, centralized market operat↗
DOE OSTI2022

Design Considerations for the Implementation of a High-Field-Side Transient CHI System on QUEST

Transient coaxial helicity injection (T-CHI), a method first developed on the small helicity injected torus (HIT-II) experiment and then validated on the much larger National Spherical Torus Experiment (NSTX) device, is a method to initiate an inductive-like tokamak plasma discharge without reliance on the central solenoid. A CHI discharge is initiated by driving current along magnetic flux that connects the inner and outer divertor plates on one end of the tokamak. To permit this, on both HIT-II and NSTX, toroidal ceramic insulators were used to electrically separate the inner and outer vessel components. The use of such large toroidal vacuum insulators may not be easy to implement in reactors. To address this issue, the Q-shu University experiments with steady-state spherical tokamak (ST) (QUEST) is developing a reactor-relevant CHI configuration in which one of the divertor plates is electrically insulated from the rest of the vessel. The first application of T-CHI on QUEST biased the CHI electrode to the outer vessel. While the CHI discharges could be easily generated, it was found that as the discharge filled the vessel, the separation distance between the injector magnetic flux footprints widened, a condition that is not favorable for the generation of closed flux surfaces. Biasing the electrode to the inner wall is a configuration similar to that used on NSTX and HIT-II, but initial testing in this configuration has proved to be challenging. The design described here overcomes the present limitation by locating the CHI electrode much closer to the CHI injector flux coil and using an NSTX-like gas injection manifold to enable high-field-side T-CHI startup on QUEST. Finally, the concepts described in this article should also benefit the future implementation of T-CHI systems in other tokamaks and spherical tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Cyber-Physical System Implementation for Manufacturing With Analytics in the Cloud Layer

Effective and efficient modern manufacturing operations require the acceptance and incorporation of the fourth industrial revolution, also known as Industry 4.0. Traditional shop floors are evolving their production into smart factories. To continue this trend, a specific architecture for the cyber-physical system is required, as well as a systematic approach to automate the application of algorithms and transform the acquired data into useful information. This work makes use of an approach that distinguishes three layers that are part of the existing Industry 4.0 paradigm: edge, fog, and cloud. Each of the layers performs computational operations, transforming the data produced in the smart factory into useful information. Trained or untrained methods for data analytics can be incorporated into the architecture. A case study is presented in which a real-time statistical control process algorithm based on control charts was implemented. The algorithm automatically detects changes in the material being processed in a computerized numerical control (CNC) machine. The algorithm implemented in the proposed architecture yielded short response times. The performance was effective since it automatically adapted to the machining of aluminum and then detected when the material was switched to steel. The data were backed up in a database that would allow traceability to the line of g-code that performed the machining.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Implementation and Verification of Cable Bending Stiffness in MoorDyn

The relatively large motions experienced by floating wind turbines and wave energy converters pose a challenge for power cables, whose internal components provide significant bending resistance and are sensitive to deformation. The behavior and associated design considerations of power cables in these highly dynamic applications make coupled analysis relevant for design. Bending stiffness capabilities have recently been added to the lumped-mass mooring dynamics model MoorDyn to enable simulation of dynamic power cables. MoorDyn is a common modeling choice for floating wind energy simulation (often coupled with OpenFAST) and floating wave energy converter simulation (often coupled with WEC-Sim) but the model’s previous line elasticity formulation only considered axial stiffness. To properly capture the dynamics of power cables, a bending stiffness model has been added that approximates cable curvature based on the difference in tangent vectors of adjacent elements. The resulting bending moment is realized by applying forces on adjacent nodes, enabling cable modeling while leaving the underlying lumped-mass formulation unchanged. In this paper, the new bending stiffness implementation is verified in static conditions against analytical solutions and then in a dynamic power cable scenario in comparison with the commercial simulator OrcaFlex. The dynamic scenario uses prescribed motions and includes wave loadings on the cable. Results indicate correct implementation of bending stiffness and show close agreement with OrcaFlex.

50 EE - Wind and Water Power Program - Water (EE-4↗
DOE OSTI2023

Implementing and Benchmarking the Locally Competitive Algorithm on the Loihi 2 Neuromorphic Processor

Neuromorphic processors have garnered considerable interest in recent years for their potential in enabling energy-efficient and high-speed computing. The Locally Competative Algorithm (LCA) has been utilized for power efficient sparse coding on neuromophic processors, including the first Loihi processor \cite{appletospikes, loihi1}. With the Loihi 2 processor enabling custom neuron models and graded spike communication, more complex implementations of LCA are possible \cite{loihi2}. We present a new implementation of LCA designed for the Loihi 2 processor and perform an initial set of benchmarks comparing it to LCA on CPU and GPU devices. In these experiments LCA on Loihi 2 is faster and orders of magnitude more efficient, while maintaining similar reconstruction quality. We find this performance improvement increases as the LCA parameters are tuned towards greater representation sparsity. Our study highlights the potential of neuromorphic processors, particularly Loihi 2, in enabling intelligent,autonomous, real-time processing on small robots, satellite where there are strict SWaP (small, lightweighr, and low-power) requirement. By demonstrating the superior performance of LCA on Loihi 2 compared to conventional computing device, our study suggests that Loihi 2 could be a valuable tool in advancing these types of applications. Overall, our study highlights the potential of neuromorphic processors for efficient and accurate data processing on resource-constrained devices.

Parpart, Gavin G.↗
DOE OSTI2024

Designing, Constructing, and Operating an IPv6 Network at SC23: A case study in implementing the IPv6 protocol on a heterogenous network that supports the SC23 conference

IPv6 is the current version of IP, the protocol that is used to route traffic across internet connections. This standard was originally developed as a new approach to mitigate concerns about address exhaustion and allow for near infinite scalability. While this protocol has gained significant support in mobile and broadband networks, as well as being the default for networks in emerging economies, it has yet to be fully adopted as a standard deployment model. Complications include legacy devices unable to support the proposed changes, as well as potential challenges that exist between devices that may not be able to fully implement current standards or configuration norms. The SCinet volunteers who deliver advanced networking to support the SC Conference set an ambitious goal of deploying an IPv6-only network at SC23. While the necessary technology is widely available and understood, the implications of deployment to support more than 15,000 users, each with multiple devices of different operating environments and ages, presents a unique technology and policy challenge. This paper will highlight the effort put into designing, implementing, and operating this innovative IPv6-only environment.

Robinson, Kate↗
DOE OSTI2024

Experiences with implementing Kokkos’ SYCL backend

With the recent diversification of the hardware landscape in the high-performance computing community, performance-portability solutions are becoming more and more important. One of the most popular choices is Kokkos. In this paper, we describe how Kokkos maps to SYCL 2020, how SYCL had to evolve to enable a full Kokkos implementation, and where we still rely on extensions provided by Intel’s oneAPI implementation. Furthermore, we describe how applications can use Kokkos and its ecosystem to already explore upcoming C++ features also when using the SYCL backend. Finally, we are providing some performance benchmarks comparing native SYCL and Kokkos and also discuss hierarchical parallelism in the SYCL 2020 interface.

Arndt, Daniel↗
DOE OSTI2021

Implementation of higher-order velocity mapping between marker particles and grid in the particle-in-cell code XGC

The global total-f gyrokinetic particle-in-cell code XGC, used to study transport in magnetic fusion plasmas or to couple with a core gyrokinetic code while functioning as an edge gyrokinetic code, implements a 5-dimensional (5D) continuum grid to perform the dissipative operations, such as plasma collisions, or to exchange the particle distribution function information with a core code. To transfer the distribution function between marker particles and a rectangular 2D velocity-space grid, XGC employs a bilinear mapping. The conservation of particle density and momentum is accurate enough in this bilinear operation, but the error in the particle energy conservation can become undesirably large and cause non-negligible numerical heating in a steep edge pedestal. In the present work we update XGC to use a novel mapping technique, based on the calculation of a pseudo-inverse, to exactly preserve moments up to the order of the discretization space. We describe the details of the implementation and we demonstrate the reduced interpolation error for a tokamak test plasma by using 1st- and 2nd-order elements with the pseudo-inverse method and comparing to the bilinear mapping.

Fusion Plasma↗
DOE OSTI2020

kokkosSZ (kSZ) A Portable Cellerator Implementation of SZ using Kokkos Programming Model

kSZ is a Kokkos-based implementation of the world-widely used SZ lossy compressor. We use Kokkos because it provides abstractions for both parallel execution of code and data management, which can be used to support portable implementation across different accelerator technologies. Kokkos can support OpenMP/OpenMPTarget, oneAPI, Pthreads, and CUDA as backend programming models.

ECP↗
DOE OSTI2024

PyTorch Implementation of Log-Additive Convolutional Neural Networks

This code is a collection of python code that defines, trains, and tests Log-Additive Convolutional Neural Networks. The model components and training routine are based on the PyTorch python library. The code implements the Log-Additive Convolutional Neural Networks as described in Pagendam et al. 2023. In addition to the Log-Additive Convolutional Neural Networks, this library also defines the Log-Normal Density loss function as described in Pagendam et al. 2023. Code from this paper is not publicly available, so the Pytorch implementation of this type of model is unique to this library.

Callis, Skylar↗
DOE OSTI2023

A Moving-Wave Implementation in WRF to Study the Impact of Surface Water Waves on the Atmospheric Boundary Layer

Abstract While numerous modeling studies have focused on the interaction of ocean surface waves with the atmospheric boundary layer, most employ idealized waves that are either monochromatic or synthetically generated from a theoretical wave spectrum, and the atmospheric solvers are typically incompressible. To study wind–wave coupling in real-world scenarios, a model that can simulate both realistic meteorological and wave conditions is necessary. In this paper we describe the implementation of a moving bottom boundary condition into the Weather Research and Forecasting Model for large-eddy simulation applications. We first describe the moving bottom boundary conditions within WRF’s pressure-based vertical coordinate system. We then validate our code with idealized test cases that have analytical solutions, including flow over a monochromatic wave with and without viscosity. Finally, we present results from turbulent flows over a moving monochromatic wave with different wave ages, and demonstrate satisfactory agreement of the wave growth rate with results from the literature. We also compare atmospheric stress and wind parameters from two physically equivalent cases. The first specifies a wind moving in the same direction as a propagating wave, while the second involves a stationary wave with the wind adjusted such that the wind relative to the wave is the same as in the first case. Results indicate that the velocity and Reynolds stress profiles for the two cases match, further validating the moving bottom implementation.

17 WIND ENERGY↗
DOE OSTI2021

Reproductive intentions among HIV-negative gay and bisexual men initiating pre-exposure prophylaxis in the Sustainable Health Center Implementation pre-exposure prophylaxis pilot study, 2014–2016

Introduction We assessed reproductive intentions and associated characteristics among men enrolled in the Sustainable Health Center Implementation pre-exposure prophylaxis (PrEP) Pilot (SHIPP) Study. Methods We analyzed baseline data from 1275 men who self-identified as gay or bisexual and participated in the SHIPP study. SHIPP was a cohort study of PrEP implementation in five community health centers in Chicago, Jackson, Philadelphia, and Washington, D.C. conducted from 2014 to 2016. Participants completed audio computer-assisted self-interviews querying intentions to have a child in the future. We estimated the association between participants’ reproductive intentions and their characteristics using Poisson regression models. Results Approximately 47% of participants indicated their intentions to have a child. Black/non-Hispanic (aPR = 1.40; 95% CI: 1.10–1.78) and other/non-Hispanic participants (aPR = 1.40; 95% CI: 1.01–1.93) were more likely to report intentions to have a child than white/non-Hispanic participants. Participants were less likely to report intentions to have children as age increased (18–29 years, reference group; 30–39 years, aPR = 0.80, 95% CI: 0.64–0.99; 40–49 years, aPR = 0.49, 95% CI: 0.33–0.72; 50+ years, aPR = 0.07, 95% CI: 0.02–0.21). Conclusions Clinicians offering PrEP to black and other/non-Hispanic gay and bisexual men should assess their reproductive intentions as family-planning counseling may be an opportunity to introduce PrEP to HIV-negative gay and bisexual men.

Immunology↗
DOE OSTI2021

A survey of software implementations used by application codes in the Exascale Computing Project

The US Department of Energy Office of Science and the National Nuclear Security Administration initiated the Exascale Computing Project (ECP) in 2016 to prepare mission-relevant applications and scientific software for the delivery of the exascale computers starting in 2023. The ECP currently supports 24 efforts directed at specific applications and six supporting co-design projects. These 24 application projects contain 62 application codes that are implemented in three high-level languages—C, C++, and Fortran—and use 22 combinations of graphical processing unit programming models. The most common implementation language is C++, which is used in 53 different application codes. The most common programming models across ECP applications are CUDA and Kokkos, which are employed in 15 and 14 applications, respectively. This article provides a survey of the programming languages and models used in the ECP applications codebase that will be used to achieve performance on the future exascale hardware platforms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Implementation of Creep-Damage Model for Concrete Fracture in MOOSE

Numerical implementation of an isotropic creep-damage model for concrete in multiphysics object-oriented simulation environment (MOOSE) finite element framework is presented in this paper. The constitutive model considers the combined effect of instantaneous and delayed strains on damage propagation. The implementation considers creep using generalized Maxwell or Kelvin-Voigt models. Using strain splitting assumptions, the total mechanical strains are split into elastic and creep components. Damage is considered to evolve as a function of the elastic and creep strains. This work considers damage as a function of fracture energy using the characteristic length of each finite element. This approach preserves the energy release rate of each element and avoids vanishing energy dissipation as the mesh is refined. Further, a creep-damage parameter is used to quantify the effect of creep strain on damage. The model is tested against published results on notched three-point bending specimens involving non-linear creep and predicts that about a third of the creep strain contributes towards damage for the experiments simulated. Results show that the proposed framework has predictive capabilities, and the model can be extended for more complex systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Utah FORGE 7-3639: Design and Implementation of a Novel Multi-Frac Stimulation Concept - 2024 Annual Workshop Presentation

This is a presentation on the Design and Implementation of a Novel Multi-Frac Stimulation Concept by The University of Oklahoma, presented by Ahmad Ghassemi. This slide presentation video discusses the design and implementation of a reservoir stimulation concept improving near-wellbore and well-to-well conductivity while enhancing the SRV and promoting self-propping and heat exchange. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 13-15, 2024.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

SmoQyDQMC.jl: A flexible implementation of determinant quantum Monte Carlo for Hubbard and electron-phonon interactions

We introduce the SmoQyDQMC.jl package, a Julia implementation of the determinant quantum Monte Carlo algorithm. SmoQyDQMC.jl supports generalized tight-binding Hamiltonians with on-site Hubbard and generalized electron-phonon ( e e -ph) interactions, including non-linear e e -ph coupling and anharmonic lattice potentials. Our implementation uses hybrid Monte Carlo methods with exact forces for sampling the phonon fields, enabling efficient simulation of low-energy phonon branches, including acoustic phonons. The SmoQyDQMC.jl package also uses a flexible scripting interface, allowing users to adapt it to different workflows and interface with other software packages in the Julia ecosystem. The code for this package can be downloaded from our GitHub repository at https://github.com/SmoQySuite/SmoQyDQMC.jl or installed using the Julia package manager. The online documentation, including examples, can be obtained from our document page at https://smoqysuite.github.io/SmoQyDQMC.jl/stable/.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

The Opus radiative opacity code, a new implementation of the super-transition array method

This report describes the development of our new radiative opacity code Opus, submitted as part of a 2020 Level 2 milestone requirement. This code aims to incorporate the capabilities in existing but separate opacity codes previously developed at LLNL (Opal, Topaz, and Tycho). The first phase in the development, which was to implement the super-transition (STA) method of Bar-Shalom and co-workers is now completed. In this work, we describe the underlying physics, implementation, usage, and regression testing as well as providing numerical examples for the opacity tables of boron, chromium, iron, and nickel. The latter are benchmarked against the LLNL legacy STA code Tycho, with an average absolute relative difference of ~1.5 and 0.5% for Planck and Rosseland opacity means, respectively. The cases where differences are larger are well understood in terms of numerical instabilities near discontinuities of the average degree of ionization inherent to the assumed opacity/equation-of-state model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗