Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HoP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Advanced Communications Technology Satellite (ACTS): Design and on-orbit performance measurements

The Advanced Communications Technology Satellite (ACTS), developed and built by Lockheed Martin Astro space for the NASA Lewis Research Center, was launched in September 1993 on the shuttle STS 51 mission. ACTS is a digital experimental communications test bed that incorporates gigahertz bandwidth transponders operating at Ka band, hopping spot beams, on-board storage and switching, and dynamic rain fade compensation. This paper describes the ACTS enabling technologies, the design of the communications payload, the constraints imposed on the spacecraft bus, and the measurements conducted to verify the performance of the system in orbit.

Gargione, F.↗

A open loop guidance architecture for navigationally robust on-orbit docking

The development of an open-hop guidance architecture is outlined for autonomous rendezvous and docking (AR&D) missions to determine whether the Global Positioning System (GPS) can be used in place of optical sensors for relative initial position determination of the chase vehicle. Feasible command trajectories for one, two, and three impulse AR&D maneuvers are determined using constrained trajectory optimization. Early AR&D command trajectory results suggest that docking accuracies are most sensitive to vertical position errors at the initial conduction of the chase vehicle. Thus, a feasible command trajectory is based on maximizing the size of the locus of initial vertical positions for which a fixed sequence of impulses will translate the chase vehicle into the target while satisfying docking accuracy requirements. Documented accuracies are used to determine whether relative GPS can achieve the vertical position error requirements of the impulsive command trajectories. Preliminary development of a thruster management system for the Cargo Transfer Vehicle (CTV) based on optimal throttle settings is presented to complete the guidance architecture. Results show that a guidance architecture based on a two impulse maneuvers generated the best performance in terms of initial position error and total velocity change for the chase vehicle.

Chern, Hung-Sheng↗

New applications for the EUTELTRACS service

The EUTELTRACS two-way Mobile Satellite Messaging and Automatic Satellite Position Reporting (ASPR) service is Europe's first commercially operated Mobile Satellite Service. It was introduced by the European Telecommunications Satellite Organization (EUTELSAT) for commercial service in 1991. The system is based on a centralized network architecture organized around a single hub station operated by EUTELSAT. Initially the system was designed with a close user group architecture enabling a mobile user to communicate exclusively with its own headquarters. This paper describes the new applications (design and tests prior to their introduction into service) especially developed for the European market and particularly the Double Hop Services opening the system to authorized external entities. In addition, the European Commission (EC) pilot demonstrations in which the EUTELTRACS system is involved are described.

Colcy, Jean-Noel↗

Spectral control of an alexandrite laser for an airborne water-vapor differential absorption lidar system

A narrow-linewidth pulsed alexandrite laser has been greatly modified for improved spectral stability in an aircraft environment, and its operation has been evaluated in the laboratory for making water-vapor differential absorption lidar measurements. An alignment technique is described to achieve the optimum free spectral range ratio for the two etalons inserted in the alexandrite laser cavity, and the sensitivity of this ratio is analyzed. This technique drastically decreases the occurrence of mode hopping, which is commonly observed in a tunable, two-intracavity-etalon laser system. High spectral purity (greater than 99.85%) at 730 nm is demonstrated by the use of a water-vapor absorption line as a notch filter. The effective cross sections of 760-nm oxygen and 730-nm water-vapor absorption lines are measured at different pressures by using this laser, which has a finite linewidth of 0.02 cm(exp -1) (FWHM). It is found that for water-vapor absorption linewidths greater than 0.04 cm(exp -1) (HWHM), or for altitudes below 10 km, the laser line can be considered monochromatic because the measured effective absorption cross section is within 1% of the calculated monochromatic cross section. An analysis of the environmental sensitivity of the two intracavity etalons is presented, and a closed-loop computer control for active stabilization of the two intracavity etalons in the alexandrite laser is described. Using a water-vapor absorption line as a wavelength reference, we measure a long-term frequency drift (approximately 1.5 h) of less than 0.7 pm in the laboratory.

Ponsardin, Patrick↗

Full Mesh Audio Conferencing Using the Point-to-Multipoint On-Board Switching Capability of ACTS

The purpose of this paper is to describe an implementation of audio conferencing using the ACTS T1-VSAT network. In particular, this implementation evaluates the use of the on-board switching capability of the satellite as a viable alternative for providing the multipoint connectivity normally provided by terrestrial audio bridge equipment The system that was implemented provides full mesh, full-duplex audio conferencing, with end-to-end voice paths between all participants requiring only a single hop (i.e. 250 msec. delay). Moreover, it addresses the lack of spontaneity in current systems by allowing a user to easily start a conference from any standard telephone handset connected to an ACTS earth station, and quickly add new members to the conference at any time using the 'hook flash' capability. No prior scheduling of resources is required and there is no central point of control, thereby providing the user with the spontaneity desired in audio conference control.

Rivett, Mary L.↗

Design Consideration on the ACTS T1-VSAT

The Advanced Communications Technology Satellite (ACTS) was developed by NASA as an experimental platform to demonstrate to industry the high risk technologies need for the next generation of communication satellites. The ACTS contains many state-of-the-art technologies including time division multiple accessing, adaptive error correction coding, multiple electronically steerable hopping beam antennas, spectrally efficient SMSK modulation, demand assignment multiple access protocol and on-board baseband circuit switching. An integral part of this testbed is the ACTS T1-very small aperture terminal (VSAT). The requirements imposed on the T1-VSAT demanded numerous design tradeoffs; balancing risk, cost, and implementation. Some of these considerations include: the method used for determining link quality, the development of a low cost and reliable Ka-band high power amplifier, the integration and testing environment for use in development and production and the low cost signal processing solution to high rate burst data. This paper discusses the tradeoffs considered in the selected implementation and the results obtained over the past two years of operation. Recommendations for improvements are also included.

Lilley, Richard D.↗

Burst Mode ASIC-Based Modem

The NASA Lewis Research Center is sponsoring the Advanced Communication Technology Insertion (ACTION) for Commercial Space Applications program. The goal of the program is to expedite the development of new technology with a clear path towards productization and enhancing the competitiveness of U.S. manufacturers. The industry has made significant investment in developing ASIC-based modem technology for continuous-mode applications and has made investigations into East, reliable acquisition of burst-mode digital communication signals. With rapid advances in analog and digital communications ICs, it is expected that more functions will be integrated onto these parts in the near future. In addition custom ASIC's can also be developed to address the areas not covered by the other IC's. Using the commercial chips and custom ASIC's, lower-cost, compact, reliable, and high-performance modems can be built for demanding satellite communication application. This report outlines a frequency-hop burst modem design based on commercially available chips.

Source record↗

Spread Spectrum Receiver Electromagnetic Interference (EMI) Test Guide

The objective of this test guide is to document appropriate unit level test methods and techniques for the performance of EMI testing of Direct Sequence (DS) spread spectrum receivers. Consideration of EMI test methods tailored for spread spectrum receivers utilizing frequency spreading, techniques other than direct sequence (such as frequency hopping, frequency chirping, and various hybrid methods) is beyond the scope of this test guide development program and is not addressed as part of this document EMI test requirements for NASA programs are primarily developed based on the requirements contained in MIL-STD-46 1 D (or earlier revisions of MIL-STD-46 1). The corresponding test method guidelines for the MIL-STD-461 D tests are provided in MIL-STD-462D. These test methods are well documented with the exception of the receiver antenna port susceptibility tests (intermodulation, cross modulation, and rejection of undesired signals) which must be tailored to the specific type of receiver that is being tested. Thus, test methods addressed in this guide consist only of antenna port tests designed to evaluate receiver susceptibility characteristics. MIL-STD-462D should be referred for guidance pertaining to test methods for EMI tests other than the antenna port tests. The scope of this test guide includes: (1) a discussion of generic DS receiver performance characteristics; (2) a summary of S-band TDRSS receiver operation; (3) a discussion of DS receiver EMI susceptibility mechanisms and characteristics; (4) a summary of military standard test guidelines; (5) recommended test approach and methods; and (6) general conclusions and recommendations for future studies in the area of spread spectrum receiver testing.

Wheeler, M. L.↗

Advanced Communications Technology Satellite (ACTS): Four-Year System Performance

The Advanced Communications Technology Satellite (ACTS) was conceived at the National Aeronautics and Space Administration (NASA) in the late 1970's as a follow-on program to ATS and CTS to continue NASA's long history of satellite communications projects. The ACTS project set the stage for the C-band satellites that started the industry, and later the ACTS project established the use of Ku-band for video distribution and direct-to-home broadcasting. ACTS, launched in September 1993 from the space shuttle, created a revolution in satellite system architecture by using digital communications techniques employing key technologies such as a fast hopping multibeam antenna, an on-board baseband processor, a wide-band microwave switch matrix, adaptive rain fade compensation, and the use of 900 MHz transponders operating at Ka-band frequencies. This paper describes the lessons learned in each of the key ACTS technology areas, as well as in the propagation investigations.

Acosta, Roberto J.↗

Computer Simulation Studies of Ion Channel Gating: Characteristics of the M2 Channel of Influenza-A Virus in a Phospholipid Bilayer

The 25 amino acids long, transmembrane fragment of the Influenza virus M2 protein forms a homotetrameric channel that transports protons across lipid bilayers. It has been postulated that high efficiency and selectivity of this process is due to gating by four histidine residues that occlude the channel lumen in the closed state. Two mechanisms of gating have been postulated. In one mechanism, the proton is "shuttled" through the gate by attaching to the delta nitrogen atom on the extracellular side of the imidazole ring, followed by the release of the proton attached to the epsilon nitrogen atom on the opposite side. In the second mechanism, the four histidines move away from each other due to electrostatic repulsion upon protonation, thus opening the gate sufficiently that a wire of water molecules can penetrate the gate. Then, protons are transported by "hopping" along the wire. In this paper, both mechanisms are evaluated in a series of molecular dynamics simulations by investigating stability of different protonation states of the channel that are involved in these mechanisms. For the shuttle mechanism, these are states with all epsilon protonated histidines, one biprotonated residue or one histidine protonated in the delta position. For the gate opening mechanism, this is the state in which all four histidines are biprotonated. In addition, a state with two biprotonated histidines is considered. For each system, composed of the protein channel embedded in phospholipid bilayer located between two water lamellae, a molecular dynamics trajectory of approximately 1.3 ns (after equilibration) was obtained. It is found that the states involved in the shuttle mechanism are stable during the simulations. Furthermore, the orientations and dynamics of water molecules near the gate are conducive to proton transfers involved in the shuttle. In contract, the fully biprotonated state, implicated in the gate opening mechanism, is not stable and the channel looses its structural integrity. If only two histidines are biprotonated the channel deforms but remains intact with the gate mostly closed. In summary, the results of this study lend support to the shuttle mechanism but not to the gate opening mechanism of proton gating in M2.

Schweighofer, Karl J.↗

Phase Diagram of the Two-Chain Hubbard Model

We have calculated the charge gap and spin gap for the two-chain Hubbard model as a function of the on-site Coulomb interaction and the interchain hopping amplitude. We used the density matrix renormalization group method and developed a method to calculate separately the gaps numerically for the symmetric and antisymmetric modes with respect to the exchange of the chain indices. We have found very different behaviors for the weak and strong interaction cases. Our calculated phase diagram is compared to the one obtained by Balents and Fisher using the weak coupling renormalization group technique.

Park, Youngho↗

Special Effects: Antenna Wetting, Short Distance Diversity and Depolarization

The Advanced Communication Technology Satellite (ACTS) communications system operates in the Ka frequency band. ACTS uses multiple, hopping, narrow beams and very small aperture terminal (VSAT) technology to establish a system availability of 99.5% for bit-error-rates of 5 x 10(exp -7) Or better over the continental United States. In order maintain this minimum system availability in all US rain zones, ACTS uses an adaptive rain fade compensation protocol to reduce the impact of signal attenuation resulting from propagation effects. The purpose of this paper is to present the results of system and sub-system characterizations considering the statistical effects of system variances due to antenna wetting and depolarization effects. In addition the availability enhancements using short distance diversity in a sub-tropical rain zone are investigated.

Acosta, Roberto J.↗

Global Interoperability of High Definition Video Streams Via ACTS and Intelsat

In 1993, a proposal at the Japan.-U.S. Cooperation in Space Program Workshop lead to a subsequent series of satellite communications experiments and demonstrations, under the title of Trans-Pacific High Data Rate Satellite Communications Experiments. The first of which is a joint collaboration between government and industry teams in the United States and Japan that successfully demonstrated distributed high definition video (HDV) post-production on a global scale using a combination of high data rate satellites and terrestrial fiber optic asynchronous transfer mode (ATM) networks. The HDV experiment is the first GIBN experiment to establish a dual-hop broadband satellite link for the transmission of digital HDV over ATM. This paper describes the team's effort in using the NASA Advanced Communications Technology Satellite (ACTS) at rates up to OC-3 (155 Mbps) between Los Angeles and Honolulu, and using Intelsat at rates up to DS-3 (45 Mbps) between Kapolei and Tokyo, with which HDV source material was transmitted between Sony Pictures High Definition Center (SPHDC) in Los Angeles and Sony Visual Communication Center (VCC) in Shinagawa, Tokyo. The global-scale connection also used terrestrial networks in Japan, the States of Hawaii and California. The 1.2 Gbps digital HDV stream was compressed down to 22.5 Mbps using a proprietary Mitsubishi MPEG-2 codec that was ATM AAL-5 compatible. The codec: employed four-way parallel processing. Improved versions of the codec are now commercially available. The successful post-production activity performed in Tokyo with a HDV clip transmitted from Los Angeles was predicated on the seamless interoperation of all the equipment between the sites, and was an exciting example in deploying a global-scale information infrastructure involving a combination of broadband satellites and terrestrial fiber optic networks. Correlation of atmospheric effects with cell loss, codec drop-out, and picture quality were made. Current efforts in the Trans-Pacific series plan to examine the use of Internet Protocol (IP)-related technologies over such an infrastructure. The use of IP allows the general public to be an integral part of the exciting activities, helps to examine issues in constructing the solar-system internet, and affords an opportunity to tap the research results from the (reliable) multicast and distributed systems communities. The current Trans- Pacific projects, including remote astronomy and digital library (visible human) are briefly described.

Hsu, Eddie↗

Mars Exploration with a Self-Refueling Hopper

A small reusable 'hopper' vehicle, the Mars In-situ Propellants Rocket (MIPR), is proposed to fly autonomously on Mars, using in-situ propellant production to manufacture rocket propellant directly out of the Martian atmosphere. The MIPR explores the Martian surface under rocket power and can repeatedly takeoff and land, carrying a suite of science instruments over a range of hundreds of meters per hop. The flight demonstration will accomplish a range of technology objectives important to both unmanned probes and to future human missions, including: (1) demonstration of a sub-orbital Mars launch vehicle, (2) demonstration of a pressure-fed small propulsion system for Mars ascent vehicles, (3) demonstration of a lightweight space engine, and (4) use for the first time of propellants manufactured in-situ on another planetary body. In addition to these technology objectives, the MIPR vehicle can carry a science payload that will advance our understanding of the surface and atmosphere of Mars.

Landis, Geoffrey A.↗

RF MEMS and Their Applications in NASA's Space Communication Systems

Radio frequency (RF) and microwave communication systems rely on frequency, amplitude, and phase control circuits to efficiently use the available spectrum. Phase control circuits are required for electronically scanning phase array antennas that enable radiation pattern shaping, scanning, and hopping. Two types of phase shifters, which are the phase control circuits, are most often used. The first is comprised of two circuits with different phase characteristics such as two transmission lines of different lengths or a high pass and low pass filter and a switch that directs the RF power through one of the two circuits. Alternatively, a variable capacitor, or varactor, is used to change the effective electrical path length of a transmission line, which changes the phase characteristics. Filter banks are required for the diplexer at the front end of wide band communication satellites. These filters greatly increase the size and mass of the RF/microwave systems, but smaller diplexers may be made with a low loss varactor or a group of capacitors, a switch and an inductor.

Williams, W. Daniel↗

Nanotechnology at NASA Ames

Advanced miniaturization, a key thrust area to enable new science and exploration missions, provides ultrasmall sensors, power sources, communication, navigation, and propulsion systems with very low mass, volume, and power consumption. Revolutions in electronics and computing will allow reconfigurable, autonomous, 'thinking' spacecraft. Nanotechnology presents a whole new spectrum of opportunities to build device components and systems for entirely new space architectures: (1) networks of ultrasmall probes on planetary surfaces; (2) micro-rovers that drive, hop, fly, and burrow; and (3) collections of microspacecraft making a variety of measurements.

Srivastava, Deepak↗

Electro-mechanical Properties of Carbon Nanotubes: Effect of Small Tensile and Torsional Strains

We present a simple picture to calculate the bandgap ($E_g$) of carbon nanotubes (CNT) in the presence of uniform torsional and tensile strain ($\sigma$). We find that under tensile strain, $ absolute value of dE_g/d\sigma$ of zig-zag tubes is approximately equal to $3t_0$, where $t_0$ is the hopping parameter. Further, $ absolute value of dE_g/d\sigma$ decreases as the chirality changes to armchair, where it takes the value zero. The sign of $dE_g/d\sigma$ follows the $(N_x-N_y) *mod 3$(equal to - 1, 0 and +1) rule. In contrast to the above, we show that under torsional strain, $absolute value of dE_g/d\sigma$ of armchair tubes is approximately equal to $3t_0$ and continually decreases as the chirality changes to zig-zag, where is takes a small value. The sign of $dE_g/d\sigma$ again follows the $(N_x-N_y)*mod 3$ rule. Finally, we predict a change in the sign of $dE_g/d\sigma$ as function of strain, corresponding to a change in the value of $q$ that corresponds to the bandgap minimum.

Anantram, M. P.↗

Analysis and Testing of Mobile Wireless Networks

Wireless networks are being used to connect mobile computing elements in more applications as the technology matures. There are now many products (such as 802.11 and 802.11b) which ran in the ISM frequency band and comply with wireless network standards. They are being used increasingly to link mobile Intranet into Wired networks. Standard methods of analyzing and testing their performance and compatibility are needed to determine the limits of the technology. This paper presents analytical and experimental methods of determining network throughput, range and coverage, and interference sources. Both radio frequency (BE) domain and network domain analysis have been applied to determine wireless network throughput and range in the outdoor environment- Comparison of field test data taken under optimal conditions, with performance predicted from RF analysis, yielded quantitative results applicable to future designs. Layering multiple wireless network- sooners can increase performance. Wireless network components can be set to different radio frequency-hopping sequences or spreading functions, allowing more than one sooner to coexist. Therefore, we ran multiple 802.11-compliant systems concurrently in the same geographical area to determine interference effects and scalability, The results can be used to design of more robust networks which have multiple layers of wireless data communication paths and provide increased throughput overall.

Alena, Richard↗