Calculation of proton-induced gamma-ray spectrum and comparison with experiment
Calculation of proton induced gamma ray spectrum and comparison with experiment
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Calculation of proton induced gamma ray spectrum and comparison with experiment
The GROCSE I experiment (Gamma-Ray Optical Counterpart Search Experiment) is a rapid slewing wide field of view optical telescope at Lawrence Livermore National Laboratory which responds to triggers from the BATSE GRB data telemetry stream that have been processed and distributed by the BACODINE network. GROCSE 1 has been in continuous automated operation since January 1994. As of October 1995, sky images for 22 GRB triggers have been recorded, in some cases while the burst was still emitting gamma rays. The preliminary analysis of eight of these events are presented here. No optical counterparts have yet been detected. Limits for optical emission are given.
The Burst and Transient Source Experiment (BATSE) is a highly sensitive, all-sky monitor for the Gamma-Ray Observatory (GRO). The eight scintillation detector modules of BATSE are positioned around the GRO spacecraft to provide a uniform view of the entire sky above the horizon. Each module is 20 in. in diameter, 0.5 in. thick and operates in the energy range from 40 to 600 keV. Rough burst locations can be derived from the relative counting rates of the detectors; longer-lived (greater than 100 min) transient sources can be detected and located by earth occultations. The data system contains mass memory to allow storage of large amounts of burst data in short time intervals. Data are sorted onboard in various ways into programmable energy, time and detector domains. Details of the design and capabilities of the BATSE are presented.
The concentration and distribution of certain elements in surface layers of planetary objects specify constraints on models of their origin and evolution. This information can be obtained by means of remote sensing gamma-ray spectroscopy, as planned for a number of future space missions, i.e., Mars, Moon, asteroids, and comets. To investigate the gamma-rays made by interactions of neutrons with matter, thin targets of different composition were placed between a neutron-source and a high-resolution germanium spectrometer. Gamma-rays in the range of 0.1 to 8 MeV were accumulated. In one set of experiments a 14-MeV neutron generator using the T(d,n) reaction as neutron-source was placed in a small room. Scattering in surrounding walls produced a spectrum of neutron energies from 14 MeV down to thermal. This complex neutron-source induced mainly neutron-capture lines and only a few scattering lines. As a result of the set-up, there was a considerable background of discrete lines from surrounding materials. A similar situation exists under planetary exploration conditions: gamma-rays are induced in the planetary surface as well as in the spacecraft. To investigate the contribution of neutrons with higher energies, an experiment for the measurement of prompt gamma radiation was set up at the end of a beam-line of an isochronous cyclotron.
The Burst and Transient Source Experiment (BATSE) on the Compton Gamma Ray Observatory (GRO) is a sensitive all-sky detector system. It consists of eight uncollimated detectors at the corners of the spacecraft which have a total energy range of 15 keV to 100 MeV. The primary objective of BATSE is the detection, location, and study of gamma ray bursts and other transient sources. The instrement also has considerable capability for the study of pulsars, solar flares, and other discrete high energy sources. The experiment is now in full operation, detecting about one gamma ray burst per day. A brief description of the on-orbit performance of BATSE is presented, along with examples of early results from some of the gamma ray bursts.
X-ray and gamma ray astronomical experiments using balloons, radiation detectors and Orbiting Solar Observatory /OGO/
The Energetic Gamma Ray Telescope Experiment (EGRET) on the Compton Gamma Ray Observatory has been in orbit for more than a year and is being used to map the full sky for gamma rays in a wide energy range from 30 to 20,000 MeV. Already these measurements have resulted in a wide range of exciting new information on quasars, pulsars, galactic sources, and diffuse gamma ray emission. The central part of the analysis is done with sky maps that typically cover an 80 x 80 degree section of the sky for an exposure time of several days. Specific software developed for this program generates the counts, exposure, and intensity maps. The analysis is done on a network of UNIX based workstations and takes full advantage of a custom-built user interface called X-dialog. The maps that are generated are stored in the FITS format for a collection of energies. These, along with similar diffuse emission background maps generated from a model calculation, serve as input to a maximum likelihood program that produces maps of likelihood with optional contours that are used to evaluate regions for sources. Likelihood also evaluates the background corrected intensity at each location for each energy interval from which spectra can be generated. Being in a standard FITS format permits all of the maps to be easily accessed by the full complement of tools available in several commercial astronomical analysis systems. In the EGRET case, IDL is used to produce graphics plots in two and three dimensions and to quickly implement any special evaluation that might be desired. Other custom-built software, such as the spectral and pulsar analyses, take advantage of the XView toolkit for display and Postscript output for the color hard copy. This poster paper outlines the data flow and provides examples of the user interfaces and output products. It stresses the advantages that are derived from the integration of the specific instrument-unique software and powerful commercial tools for graphics and statistical evaluation. This approach has several proven advantages including flexibility, a minimum of development effort, ease of use, and portability.
Cosmic gamma ray above 100 mev measured by Explorer XI satellite
BATSE, one of the four instruments on the Gamma Ray Observatory, consists of eight detectors at the corners of the spacecraft. The large size of BATSE, its full-sky viewing and versatile data system should result in considerable advances in the study of gamma-ray bursts and other transient sources. The more significant features of BATSE include: the ability to obtain locations for weak bursts, the ability to detect spectral features and rapid spectral variations in many bursts and the ability to provide burst locations to the scientific community quicker than previously possible. The instrument also has considerable capability for the study of pulsars, solar flares, and other discrete sources at energies greater than 30 keV.
This report summarizes the results of the research supported by NASA grant NAGW-2734 and lists the papers and publications produced through the grant. The basic goal of the work was to complete analysis of data from exposure of a large NaI scintillation detector to fast neutrons and to disseminate the results of the analysis. A secondary goal was to compare the measured detector response to neutrons with Monte Carlo calculations of the response. In Section 2.0, we discuss the goals of the research. In Section 3.0, we summarize the results of the research. In Section 4.0, we list the papers and publications produced under the grant. Preprints or reprints of the publications are attached as appendices.
Engineering design specifications and development of the large area detector and photomultiplier tube assemblies for the Burst and Transient Source Experiment (BATSE) of the Gamma Ray Observatory (GRO) mission are examined.
Preliminary results of applying the linear adaptive control techniques of Johnson (1985, 1988) to a pointing system the gamma-ray imaging device (GRID) experiment, are presented. A brief description of the system configuration and modeling efforts is presented along with results of simulation of the primary control tasks. The advantages of the technique include a straightforward design methodology and constant controller parameters.
The University of California at Berkeley (UCB)/Los Alamos Scientific Laboratory (LASL) gamma-ray burst experiment on board ISEE-3 is described and initial results of the experiment are presented. The instrument consists of an X-ray spectrometer originally designed to monitor solar emission continuously over the energy range 4.8-1264 keV with additional electronics to record data from the intense, short-lived gamma ray bursts at a very high rate and with good timing accuracy. Since the launch of ISEE-3 into a heliocentric orbit at the inner Lagrangian point in August, 1978, the UCB/LASL experiment has detected and recorded 12 gamma-ray bursts, including the unusually intense burst of November 4, 1978, which exhibited most of the classical gamma-ray burst characteristics, the intense burst of November 19, 1978, with an atypical time history and an unusually hard spectrum, and the extended burst of March 7, 1979. The spectral and temporal data demonstrate the diverse nature of the gamma-ray burst phenomenon, and are currently being combined with those of the Pioneer Venus Orbiter and Venera 11 and 12 to obtain accurate burst locations.
The detector response matrices for the Burst And Transient Source Experiment (BATSE) on board the Compton Gamma Ray Observatory (CGRO) are described, including their creation and operation in data analysis. These response matrices are a detailed abstract representation of the gamma-ray detectors' operating characteristics that are needed for data analysis. They are constructed from an extensive set of calibration data coupled with a complex geometry electromagnetic cascade Monte Carlo simulation code. The calibration tests and simulation algorithm optimization are described. The characteristics of the BATSE detectors in the spacecraft environment are also described.
This monograph reviews the major theoretical and experimental efforts made during the past 12 years in gamma-ray astronomy over the energy range from 10 keV to about 100 MeV, where nuclear-transition lines are expected. Early attempts to detect celestial gamma rays are recounted, mechanisms of gamma-ray line and continuum production are examined, and formulas giving the various possible differential gamma-ray spectral shapes are provided. Predicted fluxes are discussed for solar gamma rays as well as for gamma emission from supernova remnants, supernovae, neutron stars, flare stars, the galactic core and disk, black holes, and diffuse sources. Gamma-ray interactions with matter are analyzed, particularly the photoelectric effect, Compton scattering from free electrons, and pair production in nuclear fields. Significant results are summarized for observations of gamma rays from the sun as well as from point and extended sources within and beyond the Galaxy, including diffuse fluxes and transient gamma-ray bursts. Factors pertaining to the design of gamma-ray astronomy experiments are considered, especially detector background limitations, gamma-ray production within instruments, and present-day detection methods.
Gamma ray spectroscopy and alpha scattering techniques for compositional analysis of lunar and planetary surfaces
Data obtained during a two-week period in the fall of 1979 with the HEAO 3 gamma-ray spectroscopy experiment have been searched for diffuse galactic plane gamma-ray line emission expected t4 result from the decay of nucleosynthetic Fe-60, Al-26, and Na-22. With the possible exception of the 1809 keV line from Al-26 decay, for which a 2.6-omicron cosmic excess of (6.0 + or - 2.3) x 0.0001 photons/sq cm per sec per rad was measured, no positive detection was made. However, new limits ranging from 1.8 to 11 times 0.0001 photons/sq cm per sec per rad, at the 3-omicron level of confidence, have been placed on diffuse emission in these lines from the vicinity of the galactic center (between -30 and 30 deg). These limits are lower than some theories predict and thus place new constraints on the yields of these radionuclides in explosive nucleosynthesis and on the present rate of galactic nucleosynthesis.
Burst and Transient Source Experiment (BATSE) observed its most intense gamma-ray burst on 1993 January 31. The event reached count rates is approximately greater than 2 x 10(exp 6) counts/s with most of the flux emitted in an extremely short (is approximately less than 0.1 s) interval followed by a long tail, lasting about 50 s. Most of this initial pulse was recorded by our instrument with unique, very high temporal resolution (1 ms). We were thus able to show large changes in spectral hardness on 2 ms timescales throughout this initial complex. Photons as low as 25 keV and extending up to greater than 4 MeV in energy were recorded by BATSE during this first interval. The burst spectrum is best fitted by a broken power law with a break energy of 170 +/- 27 keV. The low-energy spectral index is -1.30 +/- 0.05, while a softer spectral index of -1.9 fits the spectrum between 170 keV and 2 MeV. Our data provide the only low-energy spectrum for this event; the combination of our spectrum with the one reported for GRB 930131 by the Energetic Gamma Ray Experiment Telescope (EGRET) group extends the total energy spectrum of a GRB for the first time over five decades, up to the GeV range.