Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GASIFICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Gasification Studies: Task 4 Topical Report, Utah Clean Coal Program

A key objective of the Task 4 activities has been to develop simulation tools to support development, troubleshooting and optimization of pressurized entrained-flow coal gasifiers. The overall gasifier models (Subtask 4.1) combine submodels for fluid flow (Subtask 4.2) and heat transfer (Subtask 4.3) with fundamental understanding of the chemical processes (Subtask 4.4) processes that take place as coal particles are converted to synthesis gas and slag. However, it is important to be able to compare predictions from the models against data obtained from actual operating coal gasifiers, and Subtask 4.6 aims to provide an accessible, non-proprietary system, which can be operated over a wide range of conditions to provide well-characterized data for model validation. Highlights of this work include: (1) Verification and validation activities performed with the Arches coal gasification simulation tool on experimental data from the CANMET gasifier (Subtask 4.1). (2) The simulation of multiphase reacting flows with coal particles including detailed gas-phase chemistry calculations using an extension of the one-dimensional turbulence model’s capability (Subtask 4.2). (3) The demonstration and implementation of the Reverse Monte Carlo ray tracing (RMCRT) radiation algorithm in the ARCHES code (Subtask 4.3). (4) Determination of steam and CO 2 gasification kinetics of bituminous coal chars at high temperature and elevated pressure under entrained-flow conditions (Subtask 4.4). In addition, attempts were made to gain insight into the chemical structure differences between young and mature coal soot, but both NMR and TEM characterization efforts were hampered by the highly reacted nature of the soot. (5) The development, operation, and demonstration of in-situ gas phase measurements from the University of Utah’s pilot-scale entrained-flow coal gasifier (EFG) (Subtask 4.6). This subtask aimed at acquiring predictable, consistent performance and characterizing the environment within the gasifier.

01 COAL, LIGNITE, AND PEAT↗

Advancing Coal Catalytic Gasification to Promote Optimum Syngas Production

An investigation was pursued to improve the use of low rank sub-bituminous coal by using suitable catalysts to advance gasification and create cleaner synthesis gas. Bench- and pilot-scale experiments were performed to measure key reactive properties and verify the use of red mud catalyst. The experiments provided reaction data for the development of kinetic models and validation data for CFD simulations. The reaction kinetics were analyzed to provide an understanding of the major pathways involved and identify the necessary reaction mechanisms needed for the computational models. The reaction kinetics model was implemented into the computational fluid dynamics (CFD) code MFiX to simulate, predict and validate the chemistry model with the experiments. It was shown that red mud as a catalyst lowered methane formation during coal gasification. Additional benefits were that red mud destroyed tars formation, promoted water gas shift reaction resulting in a syngas rich in hydrogen. In the presence of red mud catalyst, biomass feedstocks high in ash did not form clinker in the fluidized bed because it prevented the formation of eutectic mixtures. The reaction kinetics model was reasonably robust and the CFD predictions using the model were in good agreement with the experiments.

01 COAL, LIGNITE, AND PEAT↗

Current and Future Technologies for Gasification-Based Power Generation, Volume 2: A Pathway Study Focused on Carbon Capture Advanced Power Systems R&D Using Bituminous Coal, Revision 1

The impact of a portfolio of advanced technologies in DOE's Clean Coal R&D Program were evaluated in gasification-based power plant configurations with carbon capture and sequestration (CCS) resulting in power plants that are significantly more efficient and affordable than today's fossil energy technologies. In the IGCC process, the study estimates that a 7 percentage point efficiency improvement over conventional gasification technology is possible. With fuel cell technology, process efficiency improvements of 24 percentage points are potentially achievable. Furthermore, successful R&D for the advanced technologies evaluated results in capital costs and cost of electricity that is more than 30% below that of conventional IGCC technology with CCS.

01 COAL, LIGNITE, AND PEAT↗

Techno-Economic Analysis of Integrated Gasification Fuel Cell Systems

This National Energy Technology Laboratory (NETL) study describes the results of a pathway study for coal-based integrated gasification and solid oxide fuel cell (IGFC) power systems with and without carbon capture and storage. Two pathway scenarios are considered, based on the operating pressure of the SOFC. Three gasification technologies, including a conventional technology, differing in the syngas methane content, which has a significant effect on the IGFC system performance, were considered. The performance and cost benefits were estimated for a series of projected gains made through the development of advances in the component technologies or improvements in plant costs and availability. The objective of the study is to provide targeted research and development guidance to the FECM SOFC Program and SOFC commercial developers.

30 DIRECT ENERGY CONVERSION↗

The Advanced Scale Up Reactor Experiment (ASURE) Facility: A Testbed for Advancing the Art of Biomass and Waste Co-Gasification Systems

Powerpoint slides for an oral presentation at the 2024 Clearwater Clean Energy conference. It includes a brief discussion of the plans to construct a small pilot-scale co-gasification test facility known as the Advanced Scale Up Reactor Experiment (ASURE) Facility at NETL’s Morgantown, WV site in support of FECM’s goals for advancing biomass and waste co-gasification systems for carbon-neutral hydrogen production.

Rowan, Steven↗

From Plastic Waste to Fuel: Pyrolysis and Gasification of Polyethylene for Hydrogen Production

Thermochemical conversion processes offer promising solutions to address the plastic pollution crisis by transforming plastic waste into valuable products, notably hydrogen. In this study, thermal pyrolysis and steam gasification of polyethylene (PE), the most abundantly produced plastic waste, are investigated in a drop tube reactor system. Various process parameters, namely temperature, residence time, and feedstock composition, are evaluated to establish their correlations with reaction performance. Coal refuse, obtained from discarded thickener underflow in coal processing, is introduced as a co-feedstock for gasification to enhance PE handling and examine synergistic effects on product distribution, particularly H2 yield and syngas quality. Furthermore, the potential of low-cost, environmentally friendly catalysts (i.e., iron oxides, coal ash) for tar reforming is explored.

Natesakhawat, Sittichai↗

Gasification of Coal/Plastic Mixtures: Fundamental Studies in a Laminar Entrained Flow Reactor

There is interest in leveraging entrained-flow coal gasification for co-processing plastic waste. However interactions between plastic and coal, particularly possible competition between coal volatiles and plastic vapors for oxygen, are not well understood. This study explores co-gasification of pulverized coal and plastic granules in a lab-scale entrained-flow reactor. Conversion and CO/CO2 ratio are given special attention.

Kareem, Afeez↗

Gasification of Mixed Blends of Coal, Biomass, and Plastic Waste

The objective of this DOE-funded project by the Electric Power Research Institute, Inc. (EPRI), Hamilton Maurer International (HMI) and Sotacarbo S.p.A. (Sotacarbo), is to qualify coal, biomass, and plastic waste blends based on performance testing of selected pellet recipes in a pilot-scale updraft moving-bed gasifier. The testing provides relevant data to advance the commercial-scale design of the moving-bed gasifier to be able to successfully use these feedstocks to produce hydrogen. In particular, the effects of the waste plastics on feedstock development (i.e., blending and pelletizing) and the resulting products (i.e., syngas compositions, organic condensate production, and ash characteristics) are a focus. The gasifier is Hamilton Mauer International, Inc. (HMI)’s moving-bed gasifier, which has been proven capable of gasifying nearly all coal ranks. It has also shown the ability in prior testing work to gasify wood chips. However, mixtures of these fuels with plastic wastes had not yet been prepared and gasified together. The feedstocks were prepared by California Pellet Mill (CPM) under contract to HMI. The technical tasks for this research project included: • Feed Procurement and Preparation: Nine different feedstocks were prepared from varying compositions of PRB coal, corn stover biomass, and car fluff waste plastics. Fuel pellets were produced by California Pellet Mill (CPM) and shipped to Sotacarbo’s test facility in Italy. • Test Plan Development: A test plan was created to define the test runs to be performed. The test plan detailed the different tests that were run, instrumentation used, extractive samples taken, and relevant figures of merit. • Gasifier Testing: Tests were performed in the pilot-scale gasifier at Sotacarbo using nine different fuel feedstocks generated from varying mixtures of coal, biomass, and plastic wastes. The testing provides information on gasification reaction efficiency/performance, yielding relevant data for models used to scale up the gasifier design. This task will also included work to reassemble the gasifier at Sotacarbo and perform a baseline 100% coal run. • Data Analysis and Reporting: Review of the data, determination of figures of merit, and interpretation of the results was reported. The results can be used to specify the range of feedstock blends that can be successfully gasified as well as quantify gasifier outputs based on specific blends. The tri-fuel pelletizing conducted at CPM and gasification testing results from Sotacarbo’s 30mm up draft moving bed gasifier are significant. Providing data for an established gasifier to help accelerate its updated design to be able to accommodate feedstocks composed of coal, biomass, and plastic waste. This should ultimately lead to development and commercialization of a lower cost, white hydrogen generation system.

01 COAL, LIGNITE, AND PEAT↗

Method for producing bio-fuel that integrates heat from carbon-carbon bond-forming reactions to drive biomass gasification reactions

A low-temperature catalytic process for converting biomass (preferably glycerol recovered from the fabrication of bio-diesel) to synthesis gas (i.e., H.sub.2/CO gas mixture) in an endothermic gasification reaction is described. The synthesis gas is used in exothermic carbon-carbon bond-forming reactions, such as Fischer-Tropsch, methanol, or dimethylether syntheses. The heat from the exothermic carbon-carbon bond-forming reaction is integrated with the endothermic gasification reaction, thus providing an energy-efficient route for producing fuels and chemicals from renewable biomass resources.

09 BIOMASS FUELS↗

Method for producing bio-fuel that integrates heat from carbon-carbon bond-forming reactions to drive biomass gasification reactions

A low-temperature catalytic process for converting biomass (preferably glycerol recovered from the fabrication of bio-diesel) to synthesis gas (i.e., H.sub.2/CO gas mixture) in an endothermic gasification reaction is described. The synthesis gas is used in exothermic carbon-carbon bond-forming reactions, such as Fischer-Tropsch, methanol, or dimethylether syntheses. The heat from the exothermic carbon-carbon bond-forming reaction is integrated with the endothermic gasification reaction, thus providing an energy-efficient route for producing fuels and chemicals from renewable biomass resources.

09 BIOMASS FUELS↗

Method for producing bio-fuel that integrates heat from carbon-carbon bond-forming reactions to drive biomass gasification reactions

A low-temperature catalytic process for converting biomass (preferably glycerol recovered from the fabrication of bio-diesel) to synthesis gas (i.e., H.sub.2/CO gas mixture) in an endothermic gasification reaction is described. The synthesis gas is used in exothermic carbon-carbon bond-forming reactions, such as Fischer-Tropsch, methanol, or dimethylether syntheses. The heat from the exothermic carbon-carbon bond-forming reaction is integrated with the endothermic gasification reaction, thus providing an energy-efficient route for producing fuels and chemicals from renewable biomass resources.

09 BIOMASS FUELS↗

Methods for sequestering carbon dioxide into alcohols via gasification fermentation

The present invention is directed to improvements in gasification for use with synthesis gas fermentation. Further, the present invention is directed to improvements in gasification for the production of alcohols from a gaseous substrate containing at least one reducing gas containing at least one microorganism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methods for sulfate removal in liquid-phase catalytic hydrothermal gasification of biomass

Processing of wet biomass feedstock by liquid-phase catalytic hydrothermal gasification must address catalyst fouling and poisoning. One solution can involve heating the wet biomass with a heating unit to a pre-treatment temperature sufficient for organic constituents in the feedstock to decompose, for precipitates of inorganic wastes to form, for preheating the wet feedstock in preparation for subsequent removal of soluble sulfate contaminants, or combinations thereof. Processing further includes reacting the soluble sulfate contaminants with cations present in the feedstock material to yield a sulfate-containing precipitate and separating the inorganic precipitates and/or the sulfate-containing precipitates out of the wet feedstock. Having removed much of the inorganic wastes and the sulfate contaminants that can cause poisoning and fouling, the wet biomass feedstock can be exposed to the heterogenous catalyst for gasification.

09 BIOMASS FUELS↗

Methods for sulfate removal in liquid-phase catalytic hydrothermal gasification of biomass

Processing of wet biomass feedstock by liquid-phase catalytic hydrothermal gasification must address catalyst fouling and poisoning. One solution can involve heating the wet biomass with a heating unit to a pre-treatment temperature sufficient for organic constituents in the feedstock to decompose, for precipitates of inorganic wastes to form, for preheating the wet feedstock in preparation for subsequent removal of soluble sulfate contaminants, or combinations thereof. Processing further includes reacting the soluble sulfate contaminants with cations present in the feedstock material to yield a sulfate-containing precipitate and separating the inorganic precipitates and/or the sulfate-containing precipitates out of the wet feedstock. Having removed much of the inorganic wastes and the sulfate contaminants that can cause poisoning and fouling, the wet biomass feedstock can be exposed to the heterogeneous catalyst for gasification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methods and apparatus for catalytic hydrothermal gasification of biomass

Continuous processing of wet biomass feedstock by catalytic hydrothermal gasification must address catalyst fouling and poisoning. One solution can involve heating the wet biomass with a heating unit to a temperature sufficient for organic constituents in the feedstock to decompose, for precipitates of inorganic wastes to form, for preheating the wet feedstock in preparation for subsequent separation of sulfur contaminants, or combinations thereof. Treatment further includes separating the precipitates out of the wet feedstock, removing sulfur contaminants, or both using a solids separation unit and a sulfur separation unit, respectively. Having removed much of the inorganic wastes and the sulfur that can cause poisoning and fouling, the wet biomass feedstock can be exposed to the heterogeneous catalyst for gasification.

09 BIOMASS FUELS↗

Sandwich gasification process for high-efficiency conversion of carbonaceous fuels to clean syngas with zero residual carbon discharge

The present invention discloses a gasifier and/or a gasification process that provides a long, uniform temperature zone in the gasifier, regardless of the particle size, chemical composition, and moisture content of the fuel by sandwiching a reduction zones between two oxidation zones. The gasifier and/or gasification process has a char that is more energy-dense and almost devoid of moisture that affords for an additional (or char) oxidation zone with a temperature that is higher than a first oxidation zone which is closer to a evaporation and devolatilization zone. As such, the additional (or char) oxidation zone contributes to augmenting the reduction zone temperature, thereby providing a favorable dual impact in improving syngas composition and near-complete conversion of the tar.

30 DIRECT ENERGY CONVERSION↗

Materials Issues In Biomass Gasification

Gasification of biomass or biomass-containing streams offers a means to produce syngas that can be combusted directly or converted to higher value products. Facilities of three gasification technologies that have been put into operation have encountered issues with degradation of structural components. Our laboratory has investigated the causes of degradation of structural components of these gasifiers. In all cases, the likely causes of degradation have been determined and alternate materials identified. In some cases, these alternate materials have been put into use and found to provide improved performance. Results from examination of two types of gasifiers have been reported previously, but they are summarized in this report in order to show the parallels in materials issues for biomass gasifiers.

Keiser, Jim↗

Sandwich gasification process for high-efficiency conversion of carbonaceous fuels to clean syngas with zero residual carbon discharge

The present invention discloses a gasifier and/or a gasification process that provides a long, uniform temperature zone in the gasifier, regardless of the particle size, chemical composition, and moisture content of the fuel by sandwiching a reduction zones between two oxidation zones. The gasifier and/or gasification process has a char that is more energy-dense and almost devoid of moisture that affords for an additional (or char) oxidation zone with a temperature that is higher than a first oxidation zone which is closer to a evaporation and devolatilization zone. As such, the additional (or char) oxidation zone contributes to augmenting the reduction zone temperature, thereby providing a favorable dual impact in improving syngas composition and near-complete conversion of the tar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗