Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUID MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Measurement of Deformation Heterogeneity During Shale Swelling Using Digital Image Correlation

Abstract Rock-fluid interactions in shale formations are one of the main sources of wellbore instability issues and inadequate stimulation performance. For better planning of fracturing operations and optimizing production from these reservoirs, it is important to understand the mechanisms behind these interactions. These issues are especially prevalent in clay-rich shales, such as Tuscaloosa Marine Shale, which is the subject of this study. Conventional techniques to quantify these shale-fluid interactions comprise of measuring swelling in powdered rock grains or measurement of deformation in the whole pieces of the core using a linear variable differential transformer and strain gages. However, the contribution from individual laminae to overall deformation cannot be evaluated using these methods. In this study, we developed an experimental setup to evaluate the spatial deformation in shale during interaction with water using digital image correlation (DIC). Deformation of two shale samples, with 34 wt% to 51 wt% clay content, was studied. White paint was used to generate a random speckle pattern on the specimen and then immersed in deionized water. The deformation process was captured using a digital camera and images were analyzed using DIC to quantify the deformation. The implementation of the DIC technique enables the visualization and quantification of spatial deformation in the specimen during interacting with water. The results show the localization of large strains in select laminations. The results provide a better understanding of shale deformation when interacting with water in comparison to traditional measurements that can provide only an average strain value.

Energy & Fuels↗

Paleotopography controls weathering of Cambrian-age profiles beneath the Great Unconformity, St. Francois Mountains, SE Missouri, U.S.A.

ABSTRACT Precambrian (1.4 to 1.5 Ga) granite and rhyolite in the St. Francois Mountains at the northeast corner of the Ozark Plateau in Missouri has been altered down to a depth up to 8 meters below the Great Unconformity (the contact between Paleozoic sedimentary rock and underlying Precambrian). Petrographic, geochemical, and mineralogic data indicate that at least two events generated this alteration: 1) surficial weathering due to subaerial exposure of the granite before Cambrian burial—this material is preserved as a paleosol; and 2) alteration due to reaction with basinal fluids channeled along the unconformity from nearby sedimentary basins long after burial by Paleozoic strata. To assess the variation between surficial weathering and basinal fluid alteration, we measured and sampled for petrologic, geochemical, and mineralogic data in the rock at and just below the Great Unconformity at three paleoelevations. Whole-rock geochemical oxide and X-ray diffraction data indicate that K-metasomatism and highly crystalline illite occurred in each profile. The K increase reflects crystallization of authigenic feldspar and illite from basinal fluids that were channeled along the Great Unconformity during younger Paleozoic fluid-flow events. Each profile also exhibits an upward increase in altered feldspar crystals and highly crystalline kaolinite, and an upward decrease in Ca and Na. Such changes reflect soil formation due to reaction with meteoric water before Cambrian burial, indicating that the altered granite was a paleosol before Paleozoic basinal fluid-flow events. Notably, the paleosol at the highest paleoelevation displays the least amount of paleoweathering and the paleosol at the lowest displays the greatest amount of paleoweathering. These results demonstrate that not only can characteristics of the paleosol just below the Great Unconformity be recognized in the St. Francois Mountains, despite subsequent alteration, but also it is possible to detect variations in soil thickness that were controlled by slope steepness and, therefore, water availability and/or soil creep or failure. This spatial relationship is compatible with studies of modern soils which indicate that soil character varies with position on a slope.

Geology↗

Members of Marinobacter and Arcobacter Influence System Biogeochemistry During Early Production of Hydraulically Fractured Natural Gas Wells in the Appalachian Basin

Hydraulic fracturing is the prevailing method for enhancing recovery of hydrocarbon resources from unconventional shale formations, yet little is understood regarding the microbial impact on biogeochemical cycling in natural-gas wells. Although the metabolisms of certain fermentative bacteria and methanogenic archaea that dominate in later produced fluids have been well studied, few details have been reported on microorganisms prevelant during the early flowback period, when oxygen and other surface-derived oxyanions and nutrients become depleted. Here, we report the isolation, genomic and phenotypic characterization of Marinobacter and Arcobacter bacterial species from natural-gas wells in the Utica-Point Pleasant and Marcellus Formations coupled to supporting geochemical and metagenomic analyses of produced fluid samples. These unconventional hydrocarbon system-derived Marinobacter sp. are capable of utilizing a diversity of organic carbon sources including aliphatic and aromatic hydrocarbons, amino acids, and carboxylic acids. Marinobacter and Arcobacter can metabolize organic nitrogen sources and have the capacity for denitrification and dissimilatory nitrate reduction to ammonia (DNRA) respectively; with DNRA and ammonification processes partially explaining high concentrations of ammonia measured in produced fluids. Arcobacter is capable of chemosynthetic sulfur oxidation, which could fuel metabolic processes for other heterotrophic, fermentative, or sulfate-reducing community members. Our analysis revealed mechanisms for growth of these taxa across a broad range of salinities (up to 15% salt), which explains their enrichment during early natural-gas production. These results demonstrate the prevalence of Marinobacter and Arcobacter during a key maturation phase of hydraulically fractured natural-gas wells, and highlight the significant role these genera play in biogeochemical cycling for this economically important energy system.

59 BASIC BIOLOGICAL SCIENCES↗

Acoustic nonlinearity in fluorinert FC-43

Fluorinert FC-43 nonlinearity was investigated using two approaches: (i) a finite amplitude method with harmonic production; and (ii) a nonlinear frequency mixing in the fluid with consequent beam profile measurement of the difference frequency. The finite amplitude method provides information on the coefficient of nonlinearity, {beta}, through the amplitudes of the fundamental and the second harmonic, at a certain transmitter-receiver distance. A calibrated hydrophone was used as a receiver, in order to obtain direct pressure measurements of the acoustic waves in the fluid. The role of transmitter-receiver distance in {beta} determination is investigated. In the second approach, a single transducer is used to provide two high-frequency beams. The collinear high-frequency beams mix nonlinearly in the fluid resulting in a difference frequency beam and higher order harmonics of the primaries. The difference frequency beam profite is investigated at lengths beyond the mixing distance. The experimental data are compured with the KZK theory.

36 MATERIALS SCIENCE↗

Oxygen isotope evidence for input of magmatic fluids and precipitation of Au-Ag-tellurides in an otherwise ordinary adularia-sericite epithermal system in NE China

Abstract Tellurium-rich (Te) adularia-sericite epithermal Au-Ag deposits are an important current and future source of precious and critical metals. However, the source and evolution of ore-forming fluids in these deposits are masked by traditional bulk analysis of quartz oxygen isotope ratios that homogenize fine-scale textures and growth zones. To advance understanding of the source of Te and precious metals, herein, we use petrographic and cathodoluminescence (CL) images of such textures and growth zones to guide high spatial resolution secondary ion mass spectroscopy (SIMS) oxygen isotope analyses (10 µm spot) and spatially correlated fluid inclusion microthermometric measurements on successive quartz bands in contemporary Te-rich and Te-poor adularia-sericite (-quartz) epithermal Au-Ag vein deposits in northeastern China. The results show that large positive oxygen isotope shifts from –7.1 to +7.7‰ in quartz rims are followed by precipitation of Au-Ag telluride minerals in the Te-rich deposit, whereas small oxygen isotope shifts of only 4‰ (–2.2 to +1.6‰) were detected in quartz associated with Au-Ag minerals in the Te-poor deposits. Moreover, fluid-inclusion homogenization temperatures are higher in comb quartz rims (avg. 266.4 to 277.5 °C) followed by Au-Ag telluride minerals than in previous stages (~250 °C) in the Te-rich deposit. The Te-poor deposit has a consistent temperature (~245 °C) in quartz that pre- and postdates Au-Ag minerals. Together, the coupled increase in oxygen isotope ratios and homogenization temperatures followed by precipitation of Au-Ag tellurides strongly supports that inputs of magmatic fluid containing Au, Ag, and Te into barren meteoric water-dominated flow systems are critical to the formation of Te-rich adularia-sericite epithermal Au-Ag deposits. In contrast, Te-poor adularia-sericite epithermal Au-Ag deposits show little or no oxygen isotope or fluid-inclusion evidence for inputs of magmatic fluid.

Geochemistry & Geophysics↗

Early Expansion of the Intracranial CSF Volume After Palliative Whole-Brain Radiotherapy: Results of a Longitudinal CT Segmentation Analysis

Purpose: To assess cerebral atrophy after radiotherapy, we measured intracranial cerebrospinal fluid volume (ICSFV) over time after whole-brain radiotherapy (WBRT) and compared it with published normal-population data. Methods and Materials: We identified 9 patients receiving a single course of WBRT (30 Gy in 10 fractions over 2 weeks) for ipsilateral brain metastases with at least 3 years of computed tomography follow-up. Segmentation analysis was confined to the tumor-free hemi-cranium. The technique was semiautomated by use of thresholds based on scanned image intensity. The ICSFV percentage (ratio of ICSFV to brain volume) was used for modeling purposes. Published normal-population ICSFV percentages as a function of age were used as a control. A repeated-measures model with cross-sectional (between individuals) and longitudinal (within individuals) quadratic components was fitted to the collected data. The influence of clinical factors including the use of subependymal plate shielding was studied. Results: The median imaging follow-up was 6.25 years. There was an immediate increase (p < 0.0001) in ICSFV percentage, which decelerated over time. The clinical factors studied had no significant effect on the model. Conclusions: WBRT immediately accelerates the rate of brain atrophy. This longitudinal study in patients with brain metastases provides a baseline against which the potential benefits of more localized radiotherapeutic techniques such as radiosurgery may be compared.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Heat transfer coefficients of shell and coiled tube heat exchangers

In the present study, the heat transfer coefficients of shell and helically coiled tube heat exchangers were investigated experimentally. Three heat exchangers with different coil pitches were selected as test section for both parallel-flow and counter-flow configurations. All the required parameters like inlet and outlet temperatures of tube-side and shell-side fluids, flow rate of fluids, etc. were measured using appropriate instruments. Totally, 75 test runs were performed from which the tube-side and shell-side heat transfer coefficients were calculated. Empirical correlations were proposed for shell-side and tube-side. The calculated heat transfer coefficients of tube-side were also compared to the existing correlations for other boundary conditions and a reasonable agreement was observed. (author)

42 ENGINEERING↗

Systematic observations of enhanced oil recovery and associated changes at carbonate-brine and carbonate-petroleum interfaces

Enhanced oil recovery (EOR) from carbonates is obtained by injection of controlled ionic strength brines containing “active ions” (e.g., SO 4 2- , Mg 2+ , Ca 2+ ). It is generally believed that this occurs through the interaction of the active ions at the carbonate-brine interface (e.g., within a thin brine layer separating the petroleum and the carbonate phases). Here, in-situ observations show how one active ion, SO 4 2- , alters behavior at the carbonate-petroleum interface. Displacement of petroleum from initially oil-wet carbonate rocks using brines with variable SO 4 concentrations systematically changes oil recovery, in situ contact angles, and connectivity of the oil phase, confirming that the active ion alters interactions at the oil/brine/carbonate interface, as expected. Measurements of model calcite-fluid interfaces show that there is no measurable sorption of SO 4 to carbonate-brine interfaces but reveals that the carbonate-petroleum interface is altered by previous exposure to SO 4 -containing brines. These results suggest that EOR in carbonates is controlled indirectly by active ions. We propose that this may be due to a reduced oleophilicity of the carbonate caused by chemical complexation between the active ion and petroleum’s acidic and basic functional groups. This mechanism explains how both anions and cations act as active ions for EOR in carbonates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain shift measured from stress-controlled oscillatory shear: Evidence for a continuous yielding transition and new techniques to determine recovery rheology measures

Understanding the yielding of complex fluids is an important rheological challenge that affects our ability to engineer and process materials for a wide variety of applications. Common theoretical understandings of yield stress fluids follow the Oldroyd–Prager formalism in which the material behavior below the yield stress is treated as solidlike, and above the yield stress as liquidlike, with an instantaneous transition between the two states. This formalism was built on a quasi-static approach to the yield stress, while most applications, ranging from material processing to end user applications, involve a transient approach to yielding over a finite timescale. Using stress-controlled oscillatory shear experiments, we show that yield stress fluids flow below their yield stresses. This is quantified through measuring the strain shift, which is the value about which the strain oscillates during a stress-controlled test and is a function of only the unrecoverable strain. Measurements of the strain shift are, therefore, measurements of flow having taken place. These experimental results are compared to the Herschel–Bulkley form of the Saramito model, which utilizes the Oldroyd–Prager formalism, and the recently published Kamani–Donley–Rogers (KDR) model, in which one constitutive equation represents the entire range of material responses. Scaling relationships are derived, which allow us to show why yield stress fluids will flow across all stresses, above and below their yield stress. Finally, derivations are presented that show strain shift can be used to determine average metrics previously attainable only through recovery rheology, and these are experimentally verified.

Mechanics↗

The influence of interfacial slip on two-phase flow in rough pores

The migration and trapping of supercritical CO 2 (scCO 2 ) in geologic carbon storage is strongly dependent on the geometry and wettability of the pore network in the reservoir rock. During displacement, resident fluids may become trapped in the pits of a rough pore surface forming an immiscible two-phase fluid interface with the invading fluid, allowing apparent slip flow at this interface. We present a two-phase fluid dynamics model, including interfacial tension, to characterize the impact of mineral surface roughness on this slip flow. We show that the slip flow can be cast in more familiar terms as a contact-angle (wettability)-dependent effective permeability to the invading fluid, a nondimensional measurement which relates the interfacial slip to the pore geometry. The analysis shows the surface roughness-induced slip flow can effectively increase or decrease this effective permeability, depending on the wettability and roughness of the mineral surfaces. Configurations of the pore geometry where interfacial slip has a tangible influence on permeability have been identified. The results suggest that for large roughness features, permeability to CO 2 may be enhanced by approximately 30% during drainage, while the permeability to brine during reimbibition may be enhanced or diminished by 60%, depending on the contact angle with the mineral surfaces and degrees of roughness. For smaller roughness features, the changes in permeability through interfacial slip are small. As a result, a much larger range of effective permeabilities are suggested for general fluid pairs and contact angles, including occlusion of the pore by the trapped phase.

54 ENVIRONMENTAL SCIENCES↗

Thermal and hydraulic performance of volumetrically heated triply periodic minimal surface heaters

Advanced heat transfer surfaces, mainly Triply Periodic Minimal Surfaces (TPMSs) have great potential to increase heat transfer performance over traditional heat transfer surfaces due to their tortuous flow path and higher surface area-volume ratio. The emergence of additive manufacturing of nuclear fuel motivates experimental investigation of such advanced geometries in the context of a nuclear reactor core. Here, this study employed a novel method to explore the performance of gyroid and diamond TPMS geometries. Volumetrically heated heaters were additively manufactured from conductive polymer filament, and airflow was used to simulate the convective heat transfer from the core within a nuclear reactor. The mass flow and volumetric generation rates were varied, local Nusselt number correlations were obtained using embedded thermocouples to measure the solid and fluid temperature, and friction factor correlations were developed using differential pressure measurements. The gyroid TPMS presented a friction factor 1.5 times higher than the diamond TPMS and 90 times that of the rod bundle. TPMS geometries showed Nusselt numbers 8–10 times higher than that of the rod bundle, also maintaining colder internal temperatures, which suggested that they could sustain 250–275 % higher power density than the rod bundle for a given centerline temperature. Hence, having the potential to greatly increase the safety margins and power output of a nuclear reactor core with similar volume.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Casing Annulus Monitoring of CO 2 Injection Using Wireless Autonomous Distributed Sensor Networks

Effective and secure carbon subsurface storage, involving the deep underground injection of CO 2 into geological formations where it is permanently trapped, is paramount to mitigating CO 2 emissions (Figure I). Ensuring the integrity of these storage sites and detecting potential leakage through the casing annulus necessitates robust monitoring. This work provides the first integrated demonstration of a wireless casing-annulus monitoring architecture that can operate in highly attenuating cement-brine environments relevant to CO 2 storage. This project focused on developing and validating a novel sensor system for integration with autonomous monitoring near the cement reservoir interface. The goal was a fully integrated Technology Readiness Level (TRL) 4/5 field validation of a distributed wireless intelligent sensor system providing real-time, direct subsurface formation measurements to enhance fluid movement monitoring in the cemented casing annulus. Achieving this objective required the development and integration of 1) wireless autonomous microsensor technology by California Institute of Technology (Caltech); 2) sensor packaging and emplacement technology by Research Triangle Institute (RTI); and 3) smart well completions using wireless active casing collars and NOV pipe by the Sandia National Lab (SNL). The collaboration with the Caltech team in this project aimed to develop millimeter-scale radio frequency identification (RFID) sensors capable of detecting CO 2 , pH, and/or methane levels. These sensors are engineered to be impervious to fluids, allowing them to be mixed with cement and installed within the casing annulus. They operate using RFID protocols at frequencies of 902–928 MHz for both power and communication. A Sandia National Laboratories’ team engaged their expertise in the development of a Smart Collar system designed for the wireless data collection from these RFID sensors embedded in the cement annulus and transmission of this information to the ground surface via IntelliPipe/IntelliServ NOV drill pipe. This is accomplished through inductive coupling at the collar, which facilitates data transfer through each segment of the pipe. Because the system cannot transmit a direct current signal to power the Smart Collar, both power and communication were implemented using alternating current and electromagnetic signals at varying frequencies. Furthermore, the developed microsensor technology had to be demonstrated and validated in comparison with reference transducer measurements in a field test site at The University of Texas at Austin (UT-Austin). Although the full sensor suite did not reach field-deployment readiness, the system-level integration achieved in this project establishes a validated pathway for future incorporation of advanced microsensors.

47 OTHER INSTRUMENTATION↗

Wellbore Fracture Imaging Using Inflow Detection Measurements

One of the most striking measurements taken during DOE’s EGS Collab project at the 4850-foot depth location was the so-called ‘sewer cam’, which enabled direct visualization of the flow of water into the production well through fractures during the stimulation. The ability to see directly which fractures were flowing and (roughly) how much was a breakthrough in understanding the topology of the created fracture network. Achieving this kind of fracture flow imaging at FORGE would be more challenging because of the 225°C temperature, but equally or even more valuable if it could be achieved. In 2017, a joint project between Sandia and Stanford developed a downhole tool concept to measure the enthalpy of multiphase fluid entering a geothermal well from individual fractures (Gao et al., 2017). For the FORGE project, measuring enthalpy is of less interest because the fluid is expected to be single-phase liquid water. However, the foundation of the device was the measurement of chloride ion concentration, which could form the basis for a direct measurement of inflow from fractures. During the 2017 project, this novel chloride sensing system was implemented into a laboratory test instrument, and we confirmed the capability of the system to measure the ion concentration of fluid entering a model wellbore through a small entry port. The wellbore was a 6-inch diameter model well, and the port was approximately 0.08 inch (2mm) in diameter. The device could measure the chloride concentration accurately even when the well was flowing in a bubbly flow. Given its accuracy, the tool should be able to identify locations of water entering the wellbore even if the ion concentration differs only slightly from that of the water in the well. It is likely that different fractures may flow slightly different chloride concentrations, which would make it feasible to detect individual fractures as well as to estimate the volume of their flow. Ultimately, we could also recognize different fractures flowing back significantly different ion concentrations after fracturing in the FORGE wells. This could be realized by adding different ions in the fracturing fluids in different fractures created at different stages of stimulation (and modifying the tool to include different ion specificity). Sandia’s tool was shown during the study to have the capability to withstand the 225°C temperature, and the electrochemical sensing elements were tested in the laboratory to 225°C at 1500 psia for 24 hours. An early implementation of the fully integrated downhole electrochemical tool, including high-temperature electronics, robust housing, and wireline truck interface, had previously been constructed and tested successfully at Sandia; thus, hardware development tasks focused on advancing the technology readiness level (TRL) of this promising technology for FORGE deployment, rather than on developing a new scientific basis for its operation. The data collection electronics in this tool allowed for several other sensors (pressure, temperature, flow spinner) to be implemented in parallel as well. The research was a new collaboration between Stanford and Sandia to modify and refine the tool for FORGE deployment, to make the downhole measurements, and to characterize the evolving fractures.

15 GEOTHERMAL ENERGY↗

An alpha-synuclein MRM assay with diagnostic potential for Parkinson's disease and monitoring disease progression

Aim: The alpha-synuclein (α-syn) level in human cerebrospinal fluid (CSF), as measured by immunoassays, is promising as a Parkinson’s disease (PD) biomarker. However, the levels of total α-syn are inconsistent among studies with large cohorts and different measurement platforms. Total α-syn level also does not correlate with disease severity or progression. Here, we developed a highly sensitive Multiple Reaction Monitoring (MRM) method to measure absolute CSF α-syn peptide concentrations without prior enrichment or fractionation, aiming to discover new candidate biomarkers. Results: Six peptides covering 73% of protein sequence were reliably identified, and two were consistently quantified in cross-sectional and longitudinal cohorts. Absolute concentration of α-syn in human CSF was determined to be 2.1ng/mL. A unique α-syn peptide, TVEGAGSIAAATGFVK (81-96), displayed excellent correlation with previous immunoassay results in two independent PD cohorts (p < 0.001), correlated with disease severity, and its changes significantly tracked the disease progression longitudinally. Conclusions: An MRM assay to quantify human CSF α-syn was developed and optimized. Sixty clinical samples from cross-sectional and longitudinal PD cohorts were analyzed with this approach. Although further larger-scale validation is needed, the results suggest that α-syn peptide could serve as a promising biomarker in PD diagnosis and progression.

60 APPLIED LIFE SCIENCES↗

Modelling a compressible packed bed flow-through washing and deacetylation reactor for corn stover pretreatment

The deacetylation process is a key step in the lignocellulosic biomass pretreatment process that currently is done in batch reactors. A flow-through diffuser type reactor is a promising approach to make the process more efficient and economically favorable. A washing step before deacetylation can further reduce chemical usage and increase the process efficiency. However, the highly compacted biomass particles can cause significant pressure-drop for fluid flow through the bed, which in the worst case can cause self-enhancing pressure-drop leading to reactor blocking. Detailed understanding of the fundamentals of flow through a compressible packed bed is necessary to scale up the washing and deacetylation process. This work closely examines the classical Kozeny Carman equation and proposes modifications to accurately predict the pressure-drop at different compaction states. Here, a compressible packed bed model is further developed based on the interaction between solid mechanics and fluid dynamics. Experimental measurements of water flow through a packed bed of corn stover show good agreement with the developed model. Corn stover washing process scale up simulations show that smaller reactor diameter, higher friction lining material, lower process throughput, and higher process temperature is favorable in stabilizing the bed from extensive compression when the bed height is fixed.

09 BIOMASS FUELS↗

Toward Molecule-Specific Geochemistry of Heavy Ends: Application to the Upstream Oil Industry

Detailed molecular analysis of the composition of petroleum is typically performed on only the light (volatile) fraction, using analyses involving gas chromatography (GC). Heavier (nonvolatile) components such as kerogen, bitumen, and asphaltenes, which are relevant to conventional reservoirs and particularly to unconventional gas shale and tight oil formations, are not amenable to analysis by GC and instead are typically studied by more phenomenological techniques. This report describes a suite of analytical techniques that can provide sufficient average molecular information on the heavy ends (defined as the nonvolatile fraction) to be useful for a variety of industrial applications, expanding the discipline of molecule-specific geochemistry into the non-GC amenable fractions of petroleum materials. Heavy ends are composed of the elements C, H, N, S, and O, and the bonding environments of each can be measured by various solid state spectroscopies: nuclear magnetic resonance (NMR) and infrared (IR) spectroscopies for C, H, and O; X-ray absorption near-edge structure (XANES) spectroscopy for S and N. Additionally, advances in mass spectrometry, including techniques such as laser desorption laser ionization mass spectrometry (L2MS), can be used to measure the molecular weight and dominant molecular architecture of asphaltenes. Moreover, higher-order structures can be measured: samples of kerogen with representative pore geometry can be prepared, and those pore systems are analyzed with techniques such as X-ray diffraction and neutron scattering. Colloidal structures of asphaltenes can be measured with a variety of techniques, which reveal a hierarchical aggregation structure. These analyses provide sufficient structural data to enable structure–property and structure–function relationships to be determined, which can be applied to the characterization of conventional and unconventional resources. In gas shale and tight oil formations, which contain abundant inorganic minerals as well as kerogen, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) is used for simultaneous analysis of mineralogy, kerogen content, and maturity, typically performed at the wellsite. In conventional reservoirs, spatial variations in the asphaltene concentration measured by downhole fluid analysis logging tools are being interpreted with a recently developed equation of state to address upstream issues such as reservoir connectivity, tar mat formation, and fault block migration. Furthermore, as more heavy end analyses are developed, further scientific knowledge and industrial applications of heavy end geochemistry are anticipated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monitoring Phase Behavior of Sub- and Supercritical CO2 Confined in Porous Fractal Silica with 85% Porosity

Phase behavior of CO{sub 2} confined in porous fractal silica with volume fraction of SiO{sub 2} {phi}{sub 5} = 0.15 was investigated using small-angle neutron scattering (SANS) and ultrasmall-angle neutron scattering (USANS) techniques. The range of fluid densities (0 < ({rho}{sub CO{sub 2}}){sub bulk} < 0.977 g/cm{sup 3}) and temperatures (T = 22 C, 35 and 60 C) corresponded to gaseous, liquid, near critical and supercritical conditions of the bulk fluid. The results revealed formation of a dense adsorbed phase in small pores with sizes D < 40 {angstrom} at all temperatures. At low pressure (P < 55 bar, ({rho}{sub CO{sub 2}}){sub bulk} < 0.2 g/cm{sup 3}) the average fluid density in pores may exceed the density of bulk fluid by a factor up to 6.5 at T = 22 C. This 'enrichment factor' gradually decreases with temperature, however significant fluid densification in small pores still exists at temperature T = 60 C, i.e., far above the liquid?gas critical temperature of bulk CO{sub 2} (T{sub c} = 31.1 C). Larger pores are only partially filled with liquid-like adsorbed layer which coexists with unadsorbed fluid in the pore core. With increasing pressure, all pores become uniformly filled with the fluid, showing no measurable enrichment or depletion of the porous matrix with CO{sub 2}.

Melnichenko, Yuri B↗