Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLASH effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Electric field-induced softening of alkali silicate glasses

Motivated by the advantages of two-electrode flash sintering over normal sintering, we have investigated the effect of an external electric field on the viscosity of glass. The results show remarkable electric field-induced softening (EFIS), as application of DC field significantly lowers the softening temperature of glass. To establish the origin of EFIS, the effect is compared for single vs. mixed-alkali silicate glasses with fixed mole percentage of the alkali ions such that the mobility of alkali ions is greatly reduced while the basic network structure does not change much. The sodium silicate and lithium-sodium mixed alkali silicate glasses were tested mechanically in situ under compression in external electric field ranging from 0 to 250 V/cm in specially designed equipment. A comparison of data for different compositions indicates a complex mechanical response, which is observed as field-induced viscous flow due to a combination of Joule heating, electrolysis and dielectric breakdown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The evaluation of display symbology - A chronometric study of visual search

Three single-target visual search tasks were used to evaluate a set of CRT symbols for a helicopter traffic display. The search tasks were representative of the kinds of information extraction required in practice, and reaction time was used to measure the efficiency with which symbols could be located and identified. The results show that familiar numeric symbols were responded to more quickly than graphic symbols. The addition of modifier symbols such as a nearby flashing dot or surrounding square had a greater disruptive effect on the graphic symbols than the alphanumeric characters. The results suggest that a symbol set is like a list that must be learned. Factors that affect the time to respond to items in a list, such as familiarity and visual discriminability, and the division of list items into categories, also affect the time to identify symbols.

Remington, R.↗

On the selection and evaluation of visual display symbology Factors influencing search and identification times

Three single-target visual search tasks were used to evaluate a set of cathode-ray tube (CRT) symbols for a helicopter situation display. The search tasks were representative of the information extraction required in practice, and reaction time was used to measure the efficiency with which symbols could be located and identified. Familiar numeric symbols were responded to more quickly than graphic symbols. The addition of modifier symbols, such as a nearby flashing dot or surrounding square, had a greater disruptive effect on the graphic symbols than did the numeric characters. The results suggest that a symbol set is, in some respects, like a list that must be learned. Factors that affect the time to identify items in a memory task, such as familiarity and visual discriminability, also affect the time to identify symbols. This analogy has broad implications for the design of symbol sets. An attempt was made to model information access with this class of display.

Remington, Roger↗

Investigation of rainfall data with regard to low-level wind flow regime for east central Florida

Previous research has been conducted to investigate the effect of the low-level wind region on summertime convective storms in the east central Florida area. These effects were described by analyzing the distribution of lightning flashes within classifications based on the low-level wind regime for the months June through September of 1987 to 1990. The present research utilizes the same classification strategy to study rainfall patterns for data gathered for the CaPE (Convection and Precipitation/Electrification Experiment) field program. The CaPE field program was conducted in east central Florida from July 8, 1991 to August 18, 1991.

Brooks, Joni↗

Spectral analysis and temperature measurement during flash sintering under AC electric field

In-situ diffraction experiments were used to study the change in peak profiles of 8YSZ during conventional sintering and flash sintering under AC electric field. Using calibration from a conventionally heated standard, the lattice expansion of 8YSZ under flash conditions was correlated to actual specimen temperature, indicating temperature comparable to that required for conventional sintering. At higher current densities, a temperature rise greater than 2000 °C was reached, which resulted in abnormal grain growth and temperature instability. Microstructural analysis demonstrated that finer grain size can be achieved by limiting the current in order to avoid high specimen temperatures. Experiments varying the thickness of the green compact resulted in higher heat loss due to thermal conduction and corresponding reduction in final density. A replacement to the blackbody radiation model was successfully used to fit the data and explain all effects based on Joule heating as well as provide a flash sintering processing map incorporating furnace temperature, power dissipation, and sample geometry.

36 MATERIALS SCIENCE↗

Type Ia Supernova Explosions From Hybrid Carbon–Oxygen–Neon White Dwarf Progenitors

Motivated by recent results in stellar evolution that predict the existence of hybrid white dwarf (WD) stars with a C–O core inside an O–Ne shell, we simulate thermonuclear (Type Ia) supernovae from these hybrid progenitors. We use the FLASH code to perform multidimensional simulations in the deflagration-to-detonation transition (DDT) explosion paradigm. Our hybrid progenitor models were produced with the MESA stellar evolution code and include the effects of the Urca process, and we map the progenitor model to the FLASH grid. We performed a suite of DDT simulations over a range of ignition conditions consistent with the progenitor's thermal and convective structure assuming multiple ignition points. To compare the results from these hybrid WD stars to previous results from C–O WDs, we construct a set of C–O WD models with similar properties and similarly simulate a suite of explosions. We find that despite significant variability within each suite, trends distinguishing the explosions are apparent in their ${}^{56}\mathrm{Ni}$ yields and the kinetic properties of the ejecta. We compare our results with other recent work that studies explosions from these hybrid progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗

Photothermally activated motion and ignition using aluminum nanoparticles

The aluminum nanoparticles (Al NPs) are demonstrated to serve as active photothermal media, to enhance and control local photothermal energy deposition via the photothermal effect activated by localized surface plasmon resonance (LSPR) and amplified by Al NPs oxidation. The activation source is a 2-AA-battery-powered xenon flash lamp. The extent of the photothermally activated movement of Al NPs can be {approx}6 mm. Ignition delay can be {approx}0.1 ms. Both scanning electron microscopy and energy-dispersive X-ray spectroscopy measurements of motion-only and after-ignition products confirm significant Al oxidation occurs through sintering and bursting after the flash exposure. Simulations suggest local heat generation is enhanced by LSPR. The positive-feedback effects from the local heat generation amplified by Al oxidation produce a large increase in local temperature and pressure, which enhances movement and accelerates ignition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analysis of lightning flash videos from the Space Shuttle using blob and morphological techniques

Flash rates measured from the Space Shuttle range from 27.8 flashes per minute to 77 flashes per minute. The cloud is an optically thick medium which effectively scatters the energy from a lightning discharge and thereby broadens the risetime and duration of each lightning pulse. Because of the small size, spacecraft sensors with resolutions of 1 km or more are unlikely to detect the individual lightning channels. Instead, the energy from the lightning channel is scattered within the cloud, thereby broadening the apparent area. All of these measurements of lightning flash area and flash rate have involved manual manipulation and analysis of the video or film data. Only a small percentage of the Space Shuttle lightning video has been analyzed. An attempt is made to combine the use of real-time digital disk system and an automated analysis routine in order to overcome this limitation and make processing of a sequence of video frames a much less labor-intensive task.

Pitts, David E.↗

Lidar Sensor Performance in Closed-Loop Flight Testing of the Morpheus Rocket-Propelled Lander to a Lunar-Like Hazard Field

For the first time, a suite of three lidar sensors have been used in flight to scan a lunar-like hazard field, identify a safe landing site, and, in concert with an experimental Guidance, Navigation, and Control (GN&C) system, help to guide the Morpheus autonomous, rocket-propelled, free-flying lander to that safe site on the hazard field. The lidar sensors and GN&C system are part of the Autonomous Precision Landing and Hazard Detection and Avoidance Technology (ALHAT) project which has been seeking to develop a system capable of enabling safe, precise crewed or robotic landings in challenging terrain on planetary bodies under any ambient lighting conditions. The 3-D imaging Flash Lidar is a second generation, compact, real-time, aircooled instrument developed from a number of components from industry and NASA and is used as part of the ALHAT Hazard Detection System (HDS) to scan the hazard field and build a 3-D Digital Elevation Map (DEM) in near-real time for identifying safe sites. The Flash Lidar is capable of identifying a 30 cm hazard from a slant range of 1 km with its 8 cm range precision (1-s). The Flash Lidar is also used in Hazard Relative Navigation (HRN) to provide position updates down to a 250m slant range to the ALHAT navigation filter as it guides Morpheus to the safe site. The Navigation Doppler Lidar (NDL) system has been developed within NASA to provide velocity measurements with an accuracy of 0.2 cm/sec and range measurements with an accuracy of 17 cm both from a maximum range of 2,200 m to a minimum range of several meters above the ground. The NDLâ€"TM"s measurements are fed into the ALHAT navigation filter to provide lander guidance to the safe site. The Laser Altimeter (LA), also developed within NASA, provides range measurements with an accuracy of 5 cm from a maximum operational range of 30 km down to 1 m and, being a separate sensor from the Flash Lidar, can provide range along a separate vector. The LA measurements are also fed into the ALHAT navigation filter to provide lander guidance to the safe site. The flight tests served as the culmination of the TRL 6 journey for the ALHAT system and included launch from a pad situated at the NASA-Kennedy Space Center Shuttle Landing Facility (SLF) runway, a lunar-like descent trajectory from an altitude of 250m, and landing on a lunar-like hazard field of rocks, craters, hazardous slopes, and safe sites 400m down-range just off the North end of the runway. The tests both confirmed the expected performance and also revealed several challenges present in the flight-like environment which will feed into future TRL advancement of the sensors. Guidance provided by the ALHAT system was impeded in portions of the trajectory and intermittent near the end of the trajectory due to optical effects arising from air heated by the rocket engine. The Flash Lidar identified hazards as small as 30 cm from the maximum slant range of 450 m which Morpheus could provide; however, it was occasionally susceptible to an increase in range noise due to scintillation arising from air heated by the Morpheus rocket engine which entered its Field-of-View (FOV). The Flash Lidar was also susceptible to pre-triggering, during the HRN phase, on a dust cloud created during launch and transported down-range by the wind. The NDL provided velocity and range measurements to the expected accuracy levels yet it was also susceptible to signal degradation due to air heated by the rocket engine. The LA, operating with a degraded transmitter laser, also showed signal attenuation over a few seconds at a specific phase of the flight due to the heat plume generated by the rocket engine.

Roback, V. Eric↗

Portable flash lamp reflectance analyzer system and method

The system and method allow spectroscopic analysis of vegetation or the like without effects from changing sun and cloud conditions, undesired portions of the area of interest or atmospheric disturbances. The system (1) includes a light source (5) such as a xenon flash lamp, a telescope (7), a spectrometer (9), an analog/digital converter (11), a memory (13), a display (15), and an on-board microprocessor (17) or a port (19) for attachment to a laptop computer. The system is taken to an area of interest in the woods (step 41), the vegetation is illuminated from below (step 43) and data are taken (step 45).

Kalshoven, James Edward↗

HST images flash ionization of old ejecta by the 2011 eruption of recurrent Nova T PYXIDIS

T Pyxidis is the only recurrent nova known to be surrounded by knots of material ejected in previous outbursts. Following the eruption that began on 2011 April 14.29, we obtained seven epochs (from 4 to 383 days after eruption) of Hubble Space Telescope narrowband Hα images of T Pyx. The ionizing flash of radiation from the nova event had no discernible effect on the surrounding ejecta until at least 55 days after the eruption began. Photoionization of hydrogen located north and south of the central star was seen 132 days after the beginning of the eruption. That photoionized hydrogen recombined in the following 51 days, allowing us to determine a hydrogen atom density of at least 7×10{sup 5} cm{sup −3}—at least an order of magnitude denser than the previously detected, unresolved [N ii] knots surrounding T Pyx. Material to the northwest and southeast was photoionized, and became bright between 132 and 183 days after the eruption began. Ninety-nine days later that northwest and southeast hydrogen had recombined. Both then (282 days after outburst) and 101 days later, we detected almost no trace of hydrogen emission around T Pyx. We determine that there is a large reservoir of previously unseen, cold diffuse hydrogen overlapping the previously detected, [N ii]-emitting knots of T Pyx ejecta. The mass of this newly detected hydrogen is model-dependent, but is is probably an order of magnitude larger than that of the [N ii] knots. We also determine that there is no significant reservoir of undetected hydrogen-rich ejecta, with density comparable to the flash-ionized ejecta we have detected, from the outer boundaries of the previously detected ejecta out to about twice that distance. The lack of distant ejecta is consistent with the Schaefer et al. scenario for T Pyx, in which the star underwent its first eruption within five years of 1866 after many millennia of quiescence, followed by the six observed recurrent nova eruptions since 1890. The lack of distant ejecta, demonstrated by our observations, is not consistent with scenarios in which T Pyx has been erupting continuously as a recurrent nova for many centuries or millennia.

79 ASTRONOMY AND ASTROPHYSICS↗

District heating utilizing waste heat of a data center: High-temperature heat pumps

Data centers are energy-intensive facilities with substantial low-grade waste heat. High-temperature heat pumps can be critical in boosting the data center’s waste heat for district heating, improving the system-level energy efficiency of data centers, and reducing CO 2 emissions in district heating. This study built thermodynamic models to assess high-temperature heat pumps with six configurations using low global warming potential refrigerants to supply heat up to 120 °C. The heat pump configurations include single-stage or two-stage cycles with advanced components, such as internal heat exchanger, economizer, flash tank, or parallel compressor. The refrigerants include R1234ze(Z), R1233ed(E), R1224yd(Z), R600, and R600a, and R245fa is used as a reference. A case study was carried out to recover the waste heat from the Frontier high-performance computing data center and provide hot water for district heating at the US Department of Energy’s Oak Ridge National Laboratory campus. The optimized performance of high-temperature heat pumps is characterized with various effectiveness of internal heat exchangers, and the operating parameters of economizer or flash tank, as well as their combination. The results show that the configurations of two-stage cycles with internal heat exchanger + flash tank and internal heat exchanger + economizer/parallel-compressor provide the highest coefficient of performance under scenarios of the maximum allowable value and a fixed value (0.3) of the internal heat exchangers’ effectiveness, respectively. R1234ze(Z) and R600a are the most promising refrigerants, considering trade-offs between the coefficient of performance and the volumetric heating capacity. The single-stage cycle with internal heat exchanger + economizer/parallel-compressor using R1234ze(Z) is recommended for utilizing Fronter’s waste heat in district heating. A one mega-watt high-temperature heat pump will reduce 33,100–33,200 metric tons of CO2 emission annually, corresponding to 85.4 %–85.6 % of equivalent CO2 emissions from natural gas boilers. Here, this study provides good guidelines for designing and deploying high-temperature heat pumps to support sustainable data centers and decarbonize district heating in the US.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Flash electropolishing of BCC Fe and Fe-based alloys

The preparation of transmission electron microscopy (TEM) samples is a critical step in the characterization of materials, and the focused ion beam (FIB) technique is a commonly used method. However, a significant limitation of this technique is the FIB-induced damages on the foil surfaces, which can obscure the real features of interest, particularly in radiation effects studies. To overcome this limitation, this study presents a detailed description of the flash electropolishing technique, which can be used to remove the FIB damage from samples. The flash electropolishing technique has been successfully applied to a range of materials, including Fe, Fe-based model alloys, commercial Fe-Cr alloys, and advanced Fe-Cr alloys, both in their as-received and ion-irradiated states. Furthermore, the parameters used for Fe-Cr model alloys can be adjusted for commercial and advanced alloys with minimal modifications. Further, the study also examined the effects of electropolishing variables, such as perchloric acid concentration, electropolishing temperature, Cr concentration, and voltage. Qualitatively, a general trend and scoping test strategy is explored in our experiments. Overall, the flash electropolishing technique offers a promising solution to the challenges posed by FIB-induced damages in the preparation of TEM samples.

36 MATERIALS SCIENCE↗

An Analysis of Input Parameters for Film-Based Flash X-Ray Radiography

Flash X-ray radiography (flash) is a commonly used diagnostic technique in dynamic experiments. An analysis of the effects of input parameters on resulting metrics of image quality can aid the experimentalist in configuring the X-ray input parameters to produce the highest quality radiograph for a given experiment. Here, a flash X-ray test bed with HS800 film and a LANEX Medium F intensifier screen was used with an L3 450 kVp pulser and Scandiflash X-ray tube for this study. Input parameters including charge voltage, source filtering, and film-pack assembly were investigated for their impact on contrast-to-noise ratio (CNR), contrast, and contrast transfer function (CTF). Using VIDAR’s NDT Pro industrial film digitizer, scanner parameters such as optical density range, pixel spacing, scan mode, and digital bit-depth were also examined for their impact on image quality metrics. The highest CNR values were found with two LANEX intensifiers and no filtering. Charge voltage had no direct impact on CNR values. LANEX screen count and filtering resulted both in direct effects on CNR and interaction effects with each other and CNR value. Uncertainty bounds for CNR comparisons and repeatability of CTF evaluations are also discussed. Finally, the film results are compared with a previous study using other detector types, specifically Carestream INDUSTREX Flex GP, Flex HR, Flex XL Blue, and HPX-DR 3543.

dynamic radiography↗

Flash (Ultra-Rapid) Spark-Plasma Sintering of Silicon Carbide

A new ultra-rapid process of flash spark plasma sintering is developed. The idea of flash spark plasma sintering (or flash hot pressing - FHP) stems from the conducted theoretical analysis of the role of thermal runaway phenomena for material processing by flash sintering. The major purpose of the present study is to theoretically analyze the thermal runaway nature of flash sintering and to experimentally address the challenge of uncontrollable thermal conditions by the stabilization of the flash sintering process through the application of the external pressure. The effectiveness of the developed FHP technique is demonstrated by the few seconds–long consolidation of SiC powder in an industrial spark plasma sintering device. Specially designed sacrificial dies heat the pre-compacted SiC powder specimens to a critical temperature before applying any voltage to the powder volume and allowing the electrode-punches of the SPS device setup to contact the specimens and pass electric current through them under elevated temperatures. The experimental results demonstrate that flash sintering phenomena can be realized using conventional SPS devices. The usage of hybrid heating SPS devices is pointed out as the mainstream direction for the future studies and utilization of the new flash hot pressing (ultra-rapid spark plasma sintering) technique.

36 MATERIALS SCIENCE↗

Techno-Economics of Cogeneration Approaches for Combined Power and Desalination From Concentrated Solar Power

For many decades, integration of concentrated solar power (CSP) and desalination relied solely on the use of conventional steam Rankine cycles with thermally based desalination technologies. However, CSP research focus is shifting toward the use of supercritical CO 2 Brayton cycles due to the significant improvement in thermal efficiencies. Here, we present a techno-economic study that compares the generated power and freshwater produced from a CSP system operated with a Rankine and Brayton cycle. Such a study facilitates co-analysis of the costs of producing both electricity and water among the other trade-off assessments. To minimize the levelized cost of water (LCOW), a desalination facility utilizing multi-effect distillation with thermal vapor compression (MED/TVC) instead of multistage flash distillation (MSF) is most suitable. The techno-economic analysis reveals that in areas where water production is crucial to be optimized, although levelized cost of electricity (LCOE) values are lowest for wet-cooled recompression closed Brayton cycle (RCBR) with MSF (12.1 cents/kWh e ) and MED/TVC (12.4 cents/kWh e ), there is only a 0.35 cents/kWh e increase for dry-cooled RCBR with MED/TVC to a cost of 12.8 cents/kWh e . In conclusion, this suggests that the best candidate for optimizing water production while minimizing both LCOW and LCOE is dry-cooled RCBR with MED/TVC desalination.

14 SOLAR ENERGY↗

Light flash phenomenon seen by astronauts

The results from experiments conducted to characterize and elucidate light flashes seen by astronauts on Apollo 11, 12, 13, and 14 during transluna or transearth orbit are presented. The data show cosmic nuclei interacting with the visual apparatus causes the light flash phenomenon. The data also suggest that slow protons and helium ions with a stopping power greater than 10 KeV/micron will cause light flashes and streaks in the partially dark adapted eye. The effects of galactic cosmic nuclei interacting with man during long term missions are discussed.

Budinger, T. F.↗